All Classes Interface Summary Class Summary Enum Summary Exception Summary
| Class |
Description |
| ACCESS_OPERATION_CODE |
OPERATION_CODE: Operation Code for Operation Sequence
|
| ACCESS_OPERATION_STATUS |
Contains the status of Access Operation execution result
|
| AccessFilter |
This class represents the filter criteria for Access Operations like read, write, lock, and etc.
|
| AccessOperationResult |
This holds the result of different operations performed
|
| Actions |
This class represents the set of all operations that can be performed
on the reader like Inventory and Access operations using various type of
filters.
|
| ActiveRegionInfo |
|
| ALARM_LEVEL |
ALARM_LEVEL: define severity level of the Alarm
|
| ANTENNA_MODE |
ANTENNA_MODE: Antenna mode setting for SetAntennaMode
|
| ANTENNA_RF_CONFIG |
|
| ANTENNA_STOP_TRIGGER |
|
| ANTENNA_STOP_TRIGGER_TYPE |
Gets the value of antenna stop trigger type
|
| AntennaConfig |
The Class which holds all configuration of the Given Antenna
|
| AntennaInfo |
Not Supported in the Android RFID SDK.
|
| Antennas |
This class represents the Antenna of the reader
|
| Antennas.SingulationControl |
This class represents the antenna configuration related to singulation control
parameters session, Tag Population and the tag transit time
|
| AttributeInfo |
Contains the attribute parameters and getters/setters of those parameters
|
| BarCodeView |
Class to represent barcodes created by API
|
| BATCH_MODE |
Contains the state parameters of batch mode state and getters of these states.
|
| BATCH_MODE_EVENT |
Contains the parameters for the batch mode event.
|
| BATTERY_EVENT |
Contains the battery parameters and corresponding getters/setters of those parameters.
|
| BatteryStatistics |
|
| BEEPER_VOLUME |
Contains the different beeper parameters and getters of those parameters.
|
| BlockEraseAccessParams |
|
| BlockPermalockAccessParams |
|
| CableLossCompensation |
This class contains Cable Loss compensation related information
|
| ChangeConfigParams |
|
| COMMUNICATION_STANDARD |
COMMUNICATION_STANDARD: Part of Reader capabilities
|
| CommunicationStandardInfo |
|
| Config |
This class allows to perform reader configuration
GPI and GPO not supported in Android RFID SDK
|
| CONNECTION_STATE |
|
| Constants |
Class to maintain the strings used for notifications and intent actions
|
| CRADLE_EVENT |
|
| CustomTrustManager |
|
| DCSScannerInfo |
This class contains information about the scanner like id, Name, Model, Auto Re-Connection Reestablishment etc..
|
| DCSSDKDefs |
Class containing the definition of ENUMS to be used in the app
|
| DCSSDKDefs.DCSSDK_BT_PROTOCOL |
Bluetooth Protocol to be used in pairing barcode.
|
| DCSSDKDefs.DCSSDK_BT_SCANNER_CONFIG |
Configuration To be used in pairing barcode
|
| DCSSDKDefs.DCSSDK_COMMAND_OPCODE |
Op-codes to be used in dcssdkExecuteCommandOpCodeInXMLForScanner API function available in IDcsSdkApi |
| DCSSDKDefs.DCSSDK_CONN_TYPES |
These constants are defined to represent communication modes of scanners.
|
| DCSSDKDefs.DCSSDK_EVENT |
These constants are defined to represent notifications provided by Motorola Bluetooth Scanner Android SDK.
|
| DCSSDKDefs.DCSSDK_FU_EVENT_TYPE |
Firmware update event type
|
| DCSSDKDefs.DCSSDK_IMAGE_TYPE |
Image type of the Image data from scanner
|
| DCSSDKDefs.DCSSDK_MODE |
These constants are defined to represent operating modes of Motorola Bluetooth Scanner Android SDK.
|
| DCSSDKDefs.DCSSDK_RESULT |
These constants are defined to represent result codes that can be returned by SDK API functions.
|
| DecodeDataProcessor |
Created by PNDV47 on 2/16/2018.
|
| DeviceStatus |
|
| DeviceStatus.AntennaStatus |
|
| DhcpStatus |
|
| DISCONNECTION_EVENT_DATA |
|
| DISCONNECTION_EVENT_TYPE |
DISCONNECTION_EVENT_TYPE: Event indicating the reason for Disconnection
|
| DIVIDE_RATIO |
DIVIDE_RATIO: Part of RF_MODES
|
| DYNAMIC_POWER_OPTIMIZATION |
Dynamic power optimization
|
| ENUM_BLUETOOTH_MODE |
|
| ENUM_DEVICE_PROPERTY |
|
| ENUM_KEYLAYOUT_TYPE |
|
| ENUM_NEW_KEYLAYOUT_TYPE |
|
| ENUM_OPERATING_MODE |
|
| ENUM_TRANSPORT |
|
| ENUM_TRIGGER_MODE |
|
| ENUM_WIFI_COMMAND_TYPE |
|
| ENUM_WIFI_PROTOCOL_TYPE |
|
| ENUM_WIFI_STATE |
|
| ENUM_WIFI_STATUS |
|
| ENVIRONMENT_MODE |
|
| EventAction |
Contains the different Event actions
|
| Events |
This class contains registration/de-registration of events on the reader.
|
| FILTER_ACTION |
Filter Action for the PreFilter: State Aware, Unaware or Default.
|
| FILTER_MATCH_PATTERN |
Match Criteria for patterns
|
| FIRMWARE_UPDATE_EVENT_DATA |
|
| FirmwareUpdateEvent |
Class to represent Firmware Update Event generated by API.
|
| FORWARD_LINK_MODULATION |
FORWARD_LINK_MODULATION: Part of RF_MODES
|
| FrequencyHopInfo |
Gets the Frequency hop table and its length
|
| FrequencyHopTable |
This class contains Frequency Hop table
|
| Gen2v2 |
This class handles the Gen2v2 operations.
|
| GEN2V2_OPERATION_CODE |
G2V2_OPERATION_CODE: Operation Codes for Gen2v2 operations
|
| GEN2V2_OPERATION_STATUS |
Gen2v2 operation status messages
|
| GPI_PORT_STATE |
Not supported in Android RFID SDK
GPI_PORT_STATE: State of a GPI port
|
| GPIs |
This class represents the General Purpose Input (GPI)
|
| GPITrigger |
GPI-Trigger information.
|
| GPITrigger.GPI_SIGNAL |
|
| GPO_PORT_STATE |
Gets the value of GPO state
returns 0 for false state and 1 for true state
|
| GPOs |
Represents the General Purpose Output (GPO)
|
| HANDHELD_TRIGGER_EVENT_TYPE |
HANDHELD_TRIGGER_EVENT_TYPE specifies the type trigger that occured.
|
| HANDHELD_TRIGGER_TYPE |
HANDHELD_TRIGGER_TYPE specifies the type trigger that occured.
|
| HandheldTrigger |
Handheld-Trigger information.
|
| HEALTH_STATUS |
Gives the health status values
|
| HEARTBEAT_EVENT_DATA |
|
| IAPI3ProtocolWrapper |
|
| IAPI3Wrapper |
|
| IDCConfig |
Class will be used to manipulate Intelligent Document Capture(IDC) related configuration information
|
| IDcsSdkApi |
Interface which will be implemented by SDK which will control various operations of the scanner
|
| IDcsSdkApiDelegate |
Interface to be implemented by the app.
|
| IEvents |
This class contains registration/de-registration of events on the reader.
|
| INFO_EVENT |
|
| InvalidUsageException |
InvalidUsageException is thrown when an invalid usage is detected by the
class library.
|
| Inventory |
This class handles Inventory operations.
|
| INVENTORY_STATE |
INVENTORY_STATE: Inventory-State Parameter for PerformInventory
|
| IReaders |
|
| IReaderStatus |
|
| IRFIDLogger |
|
| IRFIDReader |
|
| KillAccessParams |
|
| LED_COLOR |
LED_COLOR specifies the user LED color on the Reader
|
| LED_INFO |
|
| LedInfo |
This class contains the LED information of the reader such as LED Color, duration and blink flag
|
| LLRPConnection |
|
| LLRPConnectionConfig |
This class contains the LLRP Connection Configuration required for Server/Client connectivity
|
| LocationInfo |
Contains the result of locating operation performed.
|
| LOCK_DATA_FIELD |
LOCK_DATA_FIELD: Lock-data field Parameter for Lock
|
| LOCK_PRIVILEGE |
LOCK_PRIVILEGE: Privilege Parameter for Lock
|
| LockAccessParams |
|
| LoginInfo |
This class contains the login information of the reader
|
| MEMORY_BANK |
MEMORY_BANK: The four memory banks as supported by Class 1 Gen 2 Specification
|
| MODULATION |
MODULATION: Part of RF_MODES
|
| MultiLocateParams |
|
| MultiTagLocate |
|
| MultiTagLocateInfo |
Created by CPKG34 on 8/3/2017.
|
| NETWORK_CONFIG |
|
| Network_IPConfig |
|
| NXP |
The NXP class comprises of the Access operations meant for NXP tags.
|
| OPERATION_END_SUMMARY |
Contains parameters of operation end summary and getters/setters.
|
| OPERATION_QUALIFIER |
This type defines nature of Operation on the specified Antenna
|
| OperationFailureException |
OperationFailureException is thrown when a failure occurs in the
class library.
|
| Param_WifiConfig |
|
| PeriodicTrigger |
Periodic Trigger Information.
|
| POWER_EVENT |
Contains the parameters of power event and getters/setters of those parameters.
|
| POWER_SOURCE_TYPE |
|
| PreFilters |
Filter criteria for Inventory.
|
| Profile |
This class contains methods for uploading or downloading the configuration file
|
| ProfileInfo |
Gets the active profile index and profile names
|
| QTReadAccessParams |
|
| QTWriteAccessParams |
|
| Queue |
Queue: implements a simple queue mechanism.
|
| RADIO_POWER_STATE |
Radio power state
|
| READER_EXCEPTION_EVENT_TYPE |
READER_EXCEPTION_EVENT_TYPE: Event indicating the reason for Reader exception.
|
| READER_ID_LENGTH |
Gets the value of mac/epc length
|
| READER_ID_TYPE |
READER_ID_TYPE: Specifies the Reader ID Type
|
| READER_POWER_STATE |
|
| READER_TYPE |
READER_TYPE: Used in Reader-Management API: Login
|
| ReaderCapabilities |
This class represents the Reader Capabilities
|
| ReaderDevice |
Contains the paramaters such as name, password, address of the reader device and methods to manage
these parameters.
|
| ReaderInfo |
This class contains the reader's information which includes name, description, location and contact
|
| ReaderManagement |
This class encapsulates the Reader Management functionality such as reboot,
firmware update.
|
| Readers |
This class contains the management of Readers as bluetooth device.
|
| Readers.RFIDReaderEventHandler |
Interface to be implemented by fragments to be notified when a new device is discovered via bluetooth
|
| ReaderStatistics |
This class represents the Reader statistics
|
| ReadPoint |
This class contains the functionality related to read point (Antenna).
|
| READPOINT_STATUS |
Read point status
|
| ReadProtectParams |
|
| ReadWeight |
Purpose: Shows weight reading related information returned by the scale
|
| RecommisionAccessParams |
|
| RegionInfo |
Contains the paramters of Region Information and methods to manage these parameters
|
| RegulatoryConfig |
Contains the parameters of Regulatory config and methods to get/set these parameters
|
| ReportTriggers |
Class related to REPORT_TRIGGERS struct/class
Not Supported in the Android RFID SDK.
|
| ResetReadProtectParams |
|
| RFID_EVENT_TYPE |
Event Type: Parameter for RegisterEventNotification
|
| RfidEventsListener |
The interface contains read event and status event handlers to be implemented by the application
in order to handle different RFID events generated.
|
| RFIDReader |
Provides the RFIDReader object.
|
| RfidReadEvents |
This class gets the readevent data and set the read event data
|
| RFIDResults |
Contains the status of function execution result
|
| RfidStatusEvents |
Sets the statusEvent data
|
| RFIDWifi |
|
| RfidWifiScanEvents |
|
| RFModes |
Gets the RFMode table and its size
|
| RFModeTable |
Gets an entry of RFModeTable, size and protocolID
|
| RFModeTableEntry |
This class represents the RF Mode table entry
|
| RMDAttributes |
Class contains Attribute names and numbers used.
|
| RUN_STATUS |
Get/set the run status
|
| SCAN_BATCH_MODE |
Contains the state parameters of batch mode state and getters of these states.
|
| SDKHandler |
Class which acts as a gateway to the SDK
|
| SECURE_MODE |
Connectivity option
|
| SeenTime |
Represents the Tag Seen time.
|
| SERVICE_ID |
SERVICE ID specifies the Application/ Component
|
| SESSION |
SESSION: Session Parameter for PerformInventory
|
| SetAttribute |
Contains the parameters of set attributes and getters/setters of those parameters
|
| SetEASParams |
|
| SL_FLAG |
SL_FLAG: Select-Flag Parameter for PerformInventory
|
| SoftwareUpdate |
This class helps to perform software updates in the reader
|
| SoftwareUpdateInfo |
This class contains parameters required for the software update
|
| SPECTRAL_MASK_INDICATOR |
SPECTRAL_MASK_INDICATOR indicates the Spectral mask characteristics of the mode.
|
| START_TRIGGER_TYPE |
START_TRIGGER_TYPE: Start Trigger Type Parameter for Inventory and Access Operations
|
| StartTrigger |
Start Trigger Information.
|
| STATE_AWARE_ACTION |
STATE_AWARE_ACTION:Action Parameter for PreFilter (C1G2 Select).
|
| STATE_UNAWARE_ACTION |
STATE_UNAWARE_ACTION: Action Parameter for PreFilter (C1G2 Select).
|
| StateUnawareAction |
Not Supported in the Android RFID SDK.
|
| STATUS_EVENT_TYPE |
Gives the value of status according to different events
|
| STOP_TRIGGER_TYPE |
STOP_TRIGGER_TYPE: Stop Trigger Type Parameter for Inventory and Access operations
|
| StopTrigger |
Stop Trigger Information.
|
| SupportedRegions |
Contains the supported region list.
|
| SystemInfo |
This class contains the information related to the reader such as firmware version,
FPGA version, reader name, reader location, UP Time, RAM and flash memort available
|
| SYSTEMTIME |
Gives the system time
|
| TAG_FIELD |
TAG_FIELD specifies the fields to be enabled in TAG_DATA.
|
| TagAccess |
This class handles all the Tag Access operations.
|
| TagData |
Represents RFID Tag Data
|
| TagDataArray |
Gets the tags and the number of tags in tagdata array
|
| TagLocationing |
Contains the api for performing and stoping tag locationing
|
| TagPatternBase |
Tag Pattern Information for Filtering.
|
| TagStorageSettings |
To configure tag storage related settings such as Maximum tag count, maximum
size of memory bank and Maximum tag ID length
|
| TARGET |
Target Parameter for PreFilter (C1G2 Select).
|
| TEMPERATURE_SOURCE |
TEMPERATURE_SOURCE: indicating whether PA or Ambient
|
| TimeZone |
This class contains methods for getting or setting the reader's time zone
|
| TimeZoneInfo |
Gets the Timezone information and timezone index
|
| TRACE_LEVEL |
TRACE_LEVEL: Trace-level setting for SetTraceLevel
|
| TriggerInfo |
Contains Trigger criterea to be used for an Inventory or Access Sequence operation
|
| TriggerWithTimeout |
Triggers with timeout.
|
| TRUNCATE_ACTION |
TRUNCATE_ACTION indicates whether only a truncated portion of the tag is
to be backscattered by the tag or not.
|
| UNIQUE_TAG_REPORT_SETTING |
Unique tag report setting
|
| UNTRACEABLE_RANGE |
The 2 ways to set range in g2v2 Untraceable command
|
| UNTRACEABLE_TID |
3 ways to show tid in g2v2 untraceable command
|
| UpdateStatus |
Represents the software update status
|
| UpTime |
Represents the Uptime.
|
| USB_BATCH_MODE |
|
| USBCDCScanner |
|
| USBCDCScanner.SSIDecodeDataPlus |
|
| USER_APP_LIST |
|
| UserApp |
This class contains methods for user application deployment in the reader
|
| UserAppInfo |
User Application Info
|
| UTCTime |
This class represents UTC Time.
|
| Util |
|
| VersionInfo |
Gets the Dll version
|
| WifiProfile |
|
| WifiScanData |
|
| WifiScanDataEventsListener |
The interface contains the event handler to be implemented by the application
in order to handle the Wifi Scan Data.
|
| WifiSecureConfig |
|
| WPA_EVENT |
|
| WRITE_FIELD_CODE |
WRITE_FIELD_CODE: Specific Field of Write operation
|
| WriteAccessParams |
|