Setup

Overview

The Wireless Insights solution consists of device components for data collection and server communication, and a vendor-specific cloud component for presenting data through dashboards. The setup process involves a few simple steps to deploy and configure device components and to acquire and apply device licenses. Dashboards are configured according to vendor and organizational preferences and are not covered here.

---

Requirements

Device Requirements

• Supported Zebra device model and Android version based on the device compatibility table in the Zebra support portal
• For Zebra Professional Series Devices, such as TC21 and TC26, a Mobility DNA Enterprise license is required.
• Wireless Insights – service built-in on Zebra Android devices; collects and analyzes Wi-Fi data
• Wireless Insights license – procured through the Zebra Software Licensing platform and installed on the device; see Licensing.
• Vendor-specific device agent – installed on the device; unique to each infrastructure vendor. Contact the vendor for the device agent installation file.

Cloud Platform

• Vendor-specific cloud dashboard and license - the infrastructure partner provides a dashboard through their cloud platform. Vendor-specific dashboards supported:
  • Aruba
  • Extreme Networks
  • Mist

Zebra Wireless Insights APIs are available to partners upon request to enable integration of the real-time device data stream into their cloud dashboard.

---

Installation

Use Zebra's StageNow or an Enterprise Mobility Management (EMM) system to deploy the vendor-specific device agent.

Prerequisites

Zebra Prerequisites

• Connect the device to a Wi-Fi network with access to Zebra's License Server.
• The time and date on the device must be properly set or managed.

Cloud Vendor-Specific Prerequisites

• Contact the vendor for the device on-boarding procedure.

Procedure

The following procedure is an example of how to install a vendor device agent, if it is the recommended method using StageNow (for large scale deployments, other tools can be used for mass device deployment, such as OEMConfig or a third party EMM):

1. Open StageNow on a host computer.
2. In the StageNow home screen, click Create New Profile from the left menu.
3. Ensure the proper MX version 8.3 or higher is selected at the top drop-down selector. The MX version on the device should match this or higher. See MX documentation for instructions how to check the version.
4. Select Xpert Mode from the list and click Create.
5. Enter the profile name. Click Start.
6. If using StageNow to copy the install file to the device, scroll down and click the plus (+) sign next to FileMgr. This adds FileMgr to the Config tab on the right side.
7. Scroll to AppMgr and click the plus (+) sign next to it. This adds AppMgr to the Config tab on the right side.
8. Click Add.
9. If using StageNow to copy the install file to the device, proceed with this step. Otherwise, skip to step 10.
   StageNow Config 1 - Copy the install file to the device with FileMgr. In the FileMgr screen under the Create New Setting tab, select and enter the desired options to install the APK, for example:
   • File Action: Transfer/Copy File
   • Target Access Method: File in the device file system
   • Target Path and File Name: [enter file path]
   • Source Access Method: [select applicable method]
   • Source File URI: [enter information prompted] Click Continue.
10. StageNow Config 2 – Install the client app. For AppMgr, select the following:
    • Action: Install
      Enter/select the desired options for the remaining fields. Click Continue.
11. Click Complete Profiles. Profile creation is complete.
12. Select one of the following based on the deployment method:
    • StageNow: Generate the barcode from the StageNow profile. Open StageNow client on the device and scan the barcode(s) generated.
    • EMM: Export XML from the StageNow profile. Do not edit the XML file - it can cause unexpected behavior. Send the XML using either OEMConfig or MX to be consumed by the EMM.
      

---

Configuration

The following configurations are required on the device:

1. Apply the Wireless Insights license.
2. Activate the Wireless Insights stack (disabled by default).
3. Set a password for the packet-capture feature, which is an optional feature.

Deploy Wireless Insights configurations using one of the following methods:

• StageNow
• EMM
• OEMConfig

Prerequisites

• See required StageNow and MX versions from WorryFreeWiFiMgr, aka Wireless Analyzer.

Procedure

The following procedure is an example of how to configure Wireless Insights, if it is the recommended method using StageNow (for large scale deployments, other tools can be used for mass device deployment, such as OEMConfig or a third party EMM):

1. Open StageNow on a host computer.
2. In the StageNow home screen, click Create New Profile from the left menu.
3. Ensure the proper MX version 10.2 or higher is selected at the top drop-down selector. The MX version on the device should match this or higher. See MX documentation for instructions how to check the version.
4. Select Xpert Mode from the list and click Create.
5. Enter the profile name. Click Start.
6. Scroll down and click the plus (+) sign next to LicenseMgr to apply the license. This adds LicenseMgr to the Config tab on the right side.
7. Scroll to WorryFreeWiFiMgr and click the plus (+) sign next to it. This adds WorryFreeWiFiMgr to the Config tab on the right side.
8. Click Add.
9. In the LicenseMgr screen under the Create New Setting tab, select one of the following procedures based on how the license is generated:
             If the license is generated from a Cloud Licensing Server (CLS), select or enter the following options:
                 • License Action Type: Perform Zebra license action
                 • Zebra License Action: Activate Feature
                 • Feature Name: [Enter the feature name provided by Zebra Software Licensing, e.g. wfw-feature-api-eval]
                 • License Source URL: [Enter the URL provided by Zebra Software Licensing]
                 • License Source Friendly Name: [Enter a friendly name and record it for future reference]
             Otherwise, if the license is generated as an Activation ID (AID) of 32 digits, select or enter the following options:
                 • License Action Type: Perform Zebra license action
                 • Zebra License Action: Activate Feature
                 • Feature Name: [Enter the feature name provided by Zebra Software Licensing, e.g. wfw-feature-api]
                 • License Source URL: [Enter the URL provided by Zebra Software Licensing]
                 • License Source Friendly Name: [Enter a friendly name and record it for future reference]
              Click Continue.
10. For WorryFreeWiFiMgr, select or enter the following options:
    • Activate/Dactivate Analyzer: Turn on
    • Configure Global Settings: [toggle checkbox to enable]
    • Global Settings Password: [enter password]
    • Old Password: [To reset the Global Settings Password from a previous setup, enter the current password]
    • End User Control: Do not change
      Click Continue.
11. Click Complete Profiles. Profile creation is complete.
12. Select one of the following based on the deployment method:
    • StageNow: Generate the barcode from the StageNow profile. Open StageNow client on the device and scan the barcode(s) generated.
    • EMM: Export XML from the StageNow profile. Do not edit the XML file - it can cause unexpected behavior. Send the XML using either OEMConfig or MX to be consumed by the EMM.
      

Note: This procedure bundles multiple configurations into a single barcode or XML file. Alternatively, configurations can be provisioned separately or in any combination with other bundles (Zebra or third party).

Verification

WorryFree WiFi Analyzer, aka Wireless Analyzer, is a built-in app on Zebra devices that can be optionally used to verify the activation of the Wireless Insights stack and the password set for packet capture.

Note: This application should not be used for starting any feature. It is only used to view the verification steps shown below.

To verify activation of the Wireless Insights stack:

1. Launch WorryFree WiFi Analyzer app.
2. If “Analyzer Activated” is displayed in green, Wireless Insights is successfully activated. Otherwise, it displays “Analyzer Not Activated” in red.

To verify the password is set for packet capture:

1. Launch WorryFree WiFi Analyzer app.
2. From the Main Menu, tap Logging.
3. Select All Packets under Packet Capture Type.
4. If a message does not appear, the password was set successfully. Otherwise, a message appears indicating the password needs to be configured as follows:

---

See Also

• About Wireless Insights
• Licensing
• Data