構成の設定

Intent i = new Intent();
i.setAction("com.symbol.datawedge.api.ACTION");
i.putExtra("com.symbol.datawedge.api.SET_CONFIG", <mainbundle>);

• 特に明記されていない限り、デフォルトの action_param 値は 0、空、またはなしです。
• データの損失を最小限に抑えるため、ENTER、LINE FEED、または TAB の文字を送信した後、50ms の DELAY を送信することをお勧めします。

トークン パラメータ

UDI またはマルチバーコードに適用されます。

すべてのパラメータは、大文字と小文字が区別されます。

「IP 出力」または「キーストローク出力」の「UDI データ出力」を参照してください。

インテント出力パラメータ

すべてのパラメータは、大文字と小文字が区別されます。

キーストローク出力パラメータ

すべてのパラメータは、大文字と小文字が区別されます。

キーストローク遅延に関する注意事項

• keystroke_delay_extended_ascii パラメータは廃止予定です。
• キーストローク プラグイン バンドルで keystroke_delay_extended_ascii パラメータを使用する場合、keystroke_delay_multibyte_chars_only パラメータは true に設定されます。
• keystroke_delay_extended_ascii と keystroke_character_delay の両方のパラメータが送信された場合:
• keystroke_character_delay の値は保持されます。
• keystroke_delay_extended_ascii の値は無視されます。
• 使用可能であれば、keystroke_delay_multibyte_chars_only の値は保存されます。そうでない場合は、エラーと見なされます。

IP 出力パラメータ

すべてのパラメータは、大文字と小文字が区別されます。

コード例

ネストされたバンドル

// MAIN BUNDLE PROPERTIES
    Bundle bMain = new Bundle();
    bMain.putString("PROFILE_NAME","Profile12");            // <- "Profile12" is a bundle
    bMain.putString("PROFILE_ENABLED","true");              // <- that will be enabled
    bMain.putString("CONFIG_MODE","CREATE_IF_NOT_EXIST");   // <- or created if necessary.

// PLUGIN_CONFIG BUNDLE PROPERTIES
    Bundle bConfig = new Bundle();
    bConfig.putString("PLUGIN_NAME","BARCODE");
    bConfig.putString("RESET_CONFIG","true");


// PARAM_LIST BUNDLE PROPERTIES
    Bundle bParams = new Bundle();
    bParams.putString("scanner_selection","auto");
    bParams.putString("scanner_input_enabled","true");
//
// NOTE: The "scanner_selection" parameter (above) supports "auto" selection
// --OR-- the assignment of a scanner device index, which is obtained by
// using the ENUMERATE_SCANNERS API.
//
//         Syntax for scanner index:
//
//                 Bundle bParams = new Bundle();
//         diff--> bParams.putString("current-device-id","0");
//                 bParams.putString("scanner_input_enabled","true");
//
//
// NEST THE BUNDLE "bParams" WITHIN THE BUNDLE "bConfig"
    bConfig.putBundle("PARAM_LIST", bParams);

// THEN NEST THE "bConfig" BUNDLE WITHIN THE MAIN BUNDLE "bMain"
    bMain.putBundle("PLUGIN_CONFIG", bConfig);

// CREATE APP_LIST BUNDLES (apps and/or activities to be associated with the Profile)
    Bundle bundleApp1 = new Bundle();
    bundleApp1.putString("PACKAGE_NAME","com.symbol.emdk.simulscansample1");
    bundleApp1.putStringArray("ACTIVITY_LIST", new String[]{
            "com.symbol.emdk.simulscansample1.DeviceControl",
            "com.symbol.emdk.simulscansample1.MainActivity",
            "com.symbol.emdk.simulscansample1.ResultsActivity.*",
            "com.symbol.emdk.simulscansample1.ResultsActivity2",
            "com.symbol.emdk.simulscansample1.SettingsFragment1"});

    Bundle bundleApp2 = new Bundle();
    bundleApp2.putString("PACKAGE_NAME","com.example.intents.datawedgeintent");
    bundleApp2.putStringArray("ACTIVITY_LIST", new String[]{
            "com.example.intents.datawedgeintent.DeviceControl",
            "com.example.intents.datawedgeintent.MainActivity",
            "com.example.intents.datawedgeintent.ResultsActivity",
            "com.example.intents.datawedgeintent.SettingsFragment1"});

    Bundle bundleApp3 = new Bundle();
    bundleApp3.putString("PACKAGE_NAME","*");
    bundleApp3.putStringArray("ACTIVITY_LIST", new String[]{"*"});

    Bundle bundleApp4 = new Bundle();
    bundleApp4.putString("PACKAGE_NAME","com.symbol.myzebraapp");
    bundleApp4.putStringArray("ACTIVITY_LIST", new String[]{"*"});

// NEXT APP_LIST BUNDLE(S) INTO THE MAIN BUNDLE
    bMain.putParcelableArray("APP_LIST", new Bundle[]{
            bundleApp1
            ,bundleApp2
            ,bundleApp3
            ,bundleApp4
    });

    Intent i = new Intent();
    i.setAction("com.symbol.datawedge.api.ACTION");
    i.putExtra("com.symbol.datawedge.api.SET_CONFIG", bMain);

    this.sendBroadcast(i);

OCR パラメータの設定

OCR パラメータを使用してプロファイルを作成/更新します。

void createBarcodeScanProfileWithOCR() {

        Bundle bMain = new Bundle();
        bMain.putString("PROFILE_NAME", "OcrBarcodeApp");
        bMain.putString("PROFILE_ENABLED", "true");
        bMain.putString("CONFIG_MODE", "CREATE_IF_NOT_EXIST");
        Bundle bConfig = new Bundle();
        bConfig.putString("PLUGIN_NAME", "BARCODE");
        bConfig.putString("RESET_CONFIG", "true");

        Bundle bParams = new Bundle();
        bParams.putString("scanner_selection", "auto");
        bParams.putString("scanner_input_enabled", "true");

        //Enable/Disable Decoders
        bParams.putString("decoder_ocr_a", "true"); //Enable or Disable OCR-A font
        bParams.putString("decoder_ocr_b", "true"); //Enable or Disable OCR-B font
        bParams.putString("decoder_micr", "true"); //Enable or Disable OCR MICR E13B font
        bParams.putString("decoder_us_currency", "true"); //Enable or Disable OCR US Currency font

        //Ocr A and B Variants
        bParams.putString("ocr_a_variant", "3"); //0 - FULL_ASCII, 1 - RESERVED_1, 2 - RESERVED_2,3 - BANKING
        bParams.putString("ocr_b_variant", "6"); //0 - FULL_ASCII, 1 - BANKING, 2 - LIMITED, 6 - ISBN_1, 7 - ISBN_2, 3 - TRAVEL_DOCUMENT_1, 8 - TRAVEL_DOCUMENT_2, 20 - TRAVEL_DOCUMENT_3, 4 - PASSPORT, 9 - VISA_TYPE_A, 10 - VISA_TYPE_B, 11 - ICAO_TRAVEL_DOCUMENT

        //Other OCR Params

        //Specify the orientation of an OCR String to be read
        bParams.putString("ocr_orientation", "1"); //Supported Values: 0 - DEGREE_0, 1 - DEGREE_270, 2 - DEGREE_180, 3 - DEGREE_90, 4 - OMNIDIRECTIONAL

        //Select number of lines to scan during OCR reading
        bParams.putString("ocr_lines", "2"); //Supported Values: 1 - LINE_1, 2 - LINE_2, 3 - LINE_3

        //Select minimum number of OCR characters (not including spaces) per line to decode during OCR reading
        bParams.putString("ocr_min_chars", "10"); //Supported Values: 3 to 100 in steps of 1

        //Select maximum number of OCR characters (including spaces) per line to decode during OCR reading
        bParams.putString("ocr_max_chars", "15"); //Supported Values: 3 to 100 in steps of 1

        //OCR Subset defines a custom group of characters in place of a preset font variant
        bParams.putString("ocr_subset", "!\"#$%()*+,-./0123456789<>ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz\\^|"); //Minimum length - 1, Maximum Length - 100

        //Set field width of blank space to stop scanning during OCR reading
        bParams.putString("ocr_quiet_zone", "60"); //Supported Values: 20 to 99 in steps of 1

        //This option creates a template for precisely matching scanned OCR characters to a desired input format.
        // Carefully constructing an OCR template eliminates scanning errors.
        // The template expression will be formed by numbers and letters.
        // The default is 99999999 which accepts any character OCR strings.
        bParams.putString("ocr_template", "AAA");

        //Sets the Check Digit Modulus value for OCR Check Digit Calculation
        bParams.putString("ocr_check_digit_modulus", "10"); //Supported Values: 1 to 99 in steps of 1

        //Sets OCR check digit multipliers for the character positions
        bParams.putString("ocr_check_digit_multiplier", "121212121212"); //Minimum length - 1, Maximum Length - 100 (Default - 121212121212)

        //Selects Check Digit Validation Scheme
        bParams.putString("ocr_check_digit_validation", "3"); //Supported Values: 0 - None, 3 - Product Add Left to Right, 1 - Product Add Right to Left, 4 - Digit Add Left to Right, 2 - Digit Add Right to Left, 5 - Product Add Right to Left Simple Remainder, 6 - Digit Add Right to Left Simple Remainder, 9 - Health Industry - HIBCC43

        //Inverse OCR is white or light words on black or dark background. This option is used to select normal, inverse or both OCR scanning
        bParams.putString("inverse_ocr", "2"); //0 - REGULAR_ONLY, 1 - INVERSE_ONLY, 2 - AUTO_DISCRIMINATE

        bConfig.putBundle("PARAM_LIST", bParams);
        ArrayList<Bundle> bundlePluginConfig = new ArrayList<>();
        bundlePluginConfig.add(bConfig);

        bMain.putParcelableArrayList("PLUGIN_CONFIG", bundlePluginConfig);

        Intent i = new Intent();
        i.setAction(DATAWEDGE_API_ACTION);
        i.putExtra("SEND_RESULT", "LAST_RESULT");
        i.putExtra("com.symbol.datawedge.api.SET_CONFIG", bMain);

        this.sendBroadcast(i);
}

RFID 入力構成の設定

private void createProfile() { 
            // Create bundle for profile configuration
    Bundle setConfigBundle = new Bundle();
    setConfigBundle.putString("PROFILE_NAME","SampleConfigApi");
    setConfigBundle.putString("PROFILE_ENABLED", "true");
    setConfigBundle.putString("CONFIG_MODE","CREATE_IF_NOT_EXIST");
    setConfigBundle.putString("RESET_CONFIG", "false");

    // Associate profile with this app
    Bundle appConfig = new Bundle();
    appConfig.putString("PACKAGE_NAME", getPackageName());
    appConfig.putStringArray("ACTIVITY_LIST", new String[]{"*"});
    setConfigBundle.putParcelableArray("APP_LIST", new Bundle[]{appConfig});
    setConfigBundle.remove("PLUGIN_CONFIG");

    // Set RFID configuration
    Bundle rfidConfigParamList  = new Bundle();
    rfidConfigParamList.putString("rfid_input_enabled", "true");
    rfidConfigParamList.putString("rfid_beeper_enable", "true");
    rfidConfigParamList.putString("rfid_led_enable", "true");
    rfidConfigParamList.putString("rfid_antenna_transmit_power", "30");
    rfidConfigParamList.putString("rfid_memory_bank", "2");
    rfidConfigParamList.putString("rfid_session", "1");
    rfidConfigParamList.putString("rfid_trigger_mode", "1");
    rfidConfigParamList.putString("rfid_filter_duplicate_tags", "true");
    rfidConfigParamList.putString("rfid_hardware_trigger_enabled", "true");
    rfidConfigParamList.putString("rfid_tag_read_duration", "250");

            // Pre-filter
    rfidConfigParamList.putString("rfid_pre_filter_enable", "true");
    rfidConfigParamList.putString("rfid_pre_filter_tag_pattern", "3EC");
    rfidConfigParamList.putString("rfid_pre_filter_target", "2");
    rfidConfigParamList.putString("rfid_pre_filter_memory_bank", "2");
    rfidConfigParamList.putString("rfid_pre_filter_offset", "2");
    rfidConfigParamList.putString("rfid_pre_filter_action", "2");

            // Post-filter
    rfidConfigParamList.putString("rfid_post_filter_enable", "true");
    rfidConfigParamList.putString("rfid_post_filter_no_of_tags_to_read", "2");
    rfidConfigParamList.putString("rfid_post_filter_rssi", "-54");

            Bundle rfidConfigBundle = new Bundle();
    rfidConfigBundle.putString("PLUGIN_NAME", "RFID");
    rfidConfigBundle.putString("RESET_CONFIG", "true");
    rfidConfigBundle.putBundle("PARAM_LIST", rfidConfigParamList);

    // Configure intent output for captured data to be sent to this app
    Bundle intentConfig = new Bundle();
    intentConfig.putString("PLUGIN_NAME", "INTENT");
    intentConfig.putString("RESET_CONFIG", "true");
    Bundle intentProps = new Bundle();
    intentProps.putString("intent_output_enabled", "true");
    intentProps.putString("intent_action", "com.zebra.rfid.rwdemo.RWDEMO");
    intentProps.putString("intent_category", "android.intent.category.DEFAULT");
    intentProps.putString("intent_delivery", "0");
    intentConfig.putBundle("PARAM_LIST", intentProps);

            // Add configurations into a collection
    ArrayList<Parcelable> configBundles = new ArrayList<>();
    configBundles.add(rfidConfigBundle);
    configBundles.add(intentConfig);
    setConfigBundle.putParcelableArrayList("PLUGIN_CONFIG", configBundles);

    // Broadcast the intent
    Intent intent = new Intent();
    intent.setAction("com.symbol.datawedge.api.ACTION");
    intent.putExtra("com.symbol.datawedge.api.SET_CONFIG", setConfigBundle);
    sendBroadcast(intent);
} 

シリアル入力構成の設定

//
// Port 1 Configuration [Start]
//
Bundle bPort1 = new Bundle();
bPort1.putString("serial_port_id", "0"); //Supported Values: 0,1
bPort1.putString("serial_input_enabled", "true"); // Supported Values: true, false
bPort1.putString("serial_baudrate", "1200"); // Supported Values (some): 300, 1200, 2400, 4800, 19200, and more
bPort1.putString("serial_databits", "8"); //Supported Values: 8, 7
bPort1.putString("serial_parity", "ODD"); //Supported Values: NONE, ODD, EVEN, MARK, SPACE
bPort1.putString("serial_stopbits", "1"); //Supported Values: 1, 2
bPort1.putString("serial_flow", "FLOW_RTS_CTS"); //Supported Values: FLOW_NONE, FLOW_RTS_CTS, FLOW_DSR_DTR, FLOW_XON_XOFF
//
// Port 1 Configuration [End]
//
// Port 2 Configuration [Start]
//
Bundle bPort2 = new Bundle();
bPort2.putString("serial_port_id", "1");
bPort2.putString("serial_input_enabled", "true");
bPort2.putString("serial_baudrate", "300");
bPort2.putString("serial_databits", "7");
//bPort2.putString("abc", "123");
bPort2.putString("serial_stopbits", "2");
bPort2.putString("serial_flow", "FLOW_DSR_DTR");
bPort2.putString("serial_parity", "EVEN");
//
// Port 2 Configuration [End]
//
Bundle bConfig = new Bundle();
bConfig.putString("RESET_CONFIG", "false");
bConfig.putString("PLUGIN_NAME", "SERIAL");
bConfig.putParcelableArray("DEVICE_LIST", new Bundle[]{
        bPort1, bPort2
});

Bundle bMain = new Bundle();
bMain.putString("PROFILE_NAME", "Profile0 (default)");
bMain.putString("CONFIG_MODE", "UPDATE");
bMain.putBundle("PLUGIN_CONFIG", bConfig);

Intent i = new Intent();
i.setAction("com.symbol.datawedge.api.ACTION");
i.putExtra("com.symbol.datawedge.api.SET_CONFIG", bMain);
i.putExtra("SEND_RESULT","LAST_RESULT");
// i.putExtra("SEND_RESULT", "true");  // For versions prior to DataWedge 7.1
i.putExtra("com.symbol.datawedge.api.RESULT_CATEGORY", DEFAULT_CATEGORY);
i.putExtra("COMMAND_IDENTIFIER", "DW_SERIAL_COMMAND");

this.sendBroadcast(i);

DCP 入力構成の設定

//SetConfig [Start]
Bundle bMain = new Bundle();

Bundle bConfigDCP = new Bundle();
Bundle bParamsDCP = new Bundle();
bParamsDCP.putString("dcp_input_enabled", "true");
bParamsDCP.putString("dcp_dock_button_on", "LEFT"); //Supported values: BOTH - Left or Right, LEFT - Left only, RIGHT - Right only
bParamsDCP.putString("dcp_start_in", "FULLSCREEN"); //Supported Values: FULLSCREEN, BUTTON, BUTTON_ONLY
bParamsDCP.putString("dcp_highest_pos", "30"); //Supported Values:  0 - 100, Highest pos can not be greater than lowest pos
bParamsDCP.putString("dcp_lowest_pos", "40"); //Supported Values: 0 - 100, Highest pos can not be greater than lowest pos
bParamsDCP.putString("dcp_drag_detect_time", "501"); //Supported Values: 0 - 1000
bConfigDCP.putString("RESET_CONFIG", "false");
bConfigDCP.putBundle("PARAM_LIST", bParamsDCP);

bMain.putBundle("DCP", bConfigDCP);

bMain.putString("PROFILE_NAME", "Profile007");
bMain.putString("PROFILE_ENABLED", "true");
bMain.putString("CONFIG_MODE", "CREATE_IF_NOT_EXIST");

Intent iSetConfig = new Intent();
iSetConfig.setAction("com.symbol.datawedge.api.ACTION");
iSetConfig.putExtra("com.symbol.datawedge.api.SET_CONFIG", bMain);
iSetConfig.putExtra("SEND_RESULT", "LAST_RESULT");
iSetConfig.putExtra("COMMAND_IDENTIFIER", "INTENT_API");
//SetConfig [End]

this.sendBroadcast(iSetConfig);

MSR 入力構成の設定

// SetConfig [Start]
Bundle bMain = new Bundle();

Bundle bConfigMSR = new Bundle();
Bundle bParamsMSR = new Bundle();

bParamsMSR.putString("msr_input_enabled", "true");

bConfigMSR.putString("PLUGIN_NAME", "MSR");
bConfigMSR.putString("RESET_CONFIG", "true");
bConfigMSR.putBundle("PARAM_LIST", bParamsMSR);

bMain.putBundle("PLUGIN_CONFIG", bConfigMSR);

bMain.putString("PROFILE_NAME", "Profile007");
bMain.putString("PROFILE_ENABLED", "true");
bMain.putString("CONFIG_MODE", "CREATE_IF_NOT_EXIST");

Intent iSetConfig = new Intent();
iSetConfig.setAction("com.symbol.datawedge.api.ACTION");
iSetConfig.putExtra("com.symbol.datawedge.api.SET_CONFIG", bMain);
iSetConfig.putExtra("SEND_RESULT", "LAST_RESULT");
iSetConfig.putExtra("COMMAND_IDENTIFIER", "INTENT_API");
// SetConfig [End]

this.sendBroadcast(iSetConfig);

音声入力構成の設定

public void CreateProfile (View view) {
ArrayList<Bundle> plugins = new ArrayList();

// Configure created profile to apply to this app
Bundle profileConfig = new Bundle();
profileConfig.putString("PROFILE_NAME", EXTRA_PROFILENAME);
profileConfig.putString("PROFILE_ENABLED", "true");
profileConfig.putString("CONFIG_MODE", "CREATE_IF_NOT_EXIST");  // Create profile if it does not exist

// Associate profile with this app
Bundle appConfig = new Bundle();
appConfig.putString("PACKAGE_NAME", getPackageName());
appConfig.putStringArray("ACTIVITY_LIST", new String[]{"*"});
profileConfig.putParcelableArray("APP_LIST", new Bundle[]{appConfig});

// Configure intent output for captured data to be sent to this app
Bundle intentConfig = new Bundle();
intentConfig.putString("PLUGIN_NAME", "INTENT");
intentConfig.putString("RESET_CONFIG", "true");

Bundle intentProps = new Bundle();
intentProps.putString("intent_output_enabled", "true");
intentProps.putString("intent_action", "com.zebra.datacapture1.ACTION");
intentProps.putString("intent_delivery", "2");
intentConfig.putBundle("PARAM_LIST", intentProps);

plugins.add(intentConfig);

// Add Voice Input Configuration
Bundle voiceConfig = new Bundle();
voiceConfig.putString("PLUGIN_NAME", "VOICE");
voiceConfig.putString("RESET_CONFIG", "false");
Bundle bParams = new Bundle();
bParams.putString("voice_input_enabled", "true");
bParams.putString("voice_data_capture_start_phrase", "hello");
bParams.putString("voice_data_capture_end_phrase", "");
bParams.putString("voice_end_detection_timeout", "3");
bParams.putString("voice_data_type", "1");
bParams.putString("voice_start_phrase_waiting_tone", "true");
bParams.putString("voice_data_capture_waiting_tone", "true");
bParams.putString("voice_validation_window", "true");
bParams.putString("voice_offline_speech", "false");
bParams.putString("voice_data_capture_start_option", "0");
bParams.putString("voice_command_tab_enabled", "true");
bParams.putString("voice_command_tab_phrase", "tab");
bParams.putString("voice_command_enter", "true");
bParams.putString("voice_command_enter_phrase", "enter");
bParams.putString("voice_command_move_next_enabled", "true");
bParams.putString("voice_command_move_next_phrase", "next");
bParams.putString("voice_command_move_previous_enabled", "true");
bParams.putString("voice_command_move_previous_phrase", "previous");
bParams.putString("voice_command_escape_enabled", "true");
bParams.putString("voice_command_escape_phrase", "escape");
bParams.putString("voice_command_clear_enabled", "true");
bParams.putString("voice_command_clear_phrase", "empty");
voiceConfig.putBundle("PARAM_LIST", bParams);

// Add Voice Input plugin Configuration to the plugins list
plugins.add(voiceConfig);

// Add plugins list to the bundle
profileConfig.putParcelableArrayList("PLUGIN_CONFIG", plugins);

// Broadcast the intent.

Intent i = new Intent();
i.setAction("com.symbol.datawedge.api.ACTION");
i.putExtra("com.symbol.datawedge.api.SET_CONFIG", profileConfig);
i.putExtra("SEND_RESULT","LAST_RESULT");
i.putExtra("COMMAND_IDENTIFIER", "SET_CONFIG");
this.sendBroadcast(i);
    }

BDF 処理の設定

処理プラグインでは、取得したデータを、関連付けられたアプリに出力プラグインを介して送信する前に、指定された方法でそのデータを操作します。「BDF について」および「ADF について」を参照してください。

// Main bundle properties
    Bundle bMain = new Bundle();
    bMain.putString("PROFILE_NAME","Profile12");
    bMain.putString("PROFILE_ENABLED","true");
    bMain.putString("CONFIG_MODE","CREATE_IF_NOT_EXIST");

// plugin_config bundle properties
    Bundle bConfig = new Bundle();
    bConfig.putString("PLUGIN_NAME","BDF");
    bConfig.putString("RESET_CONFIG","true");
    bConfig.putString("OUTPUT_PLUGIN_NAME","KEYSTROKE");

// param_list bundle properties
    Bundle bParams = new Bundle();
    bParams.putString("bdf_enabled","true");
    bParams.putString("bdf_prefix","AAA");
    bParams.putString("bdf_send_enter","true");

    bConfig.putBundle("PARAM_LIST", bParams);

    bMain.putBundle("PLUGIN_CONFIG", bConfig);

    Intent i = new Intent();
    i.setAction("com.symbol.datawedge.api.ACTION");
    i.putExtra("com.symbol.datawedge.api.SET_CONFIG", bMain);
    this.sendBroadcast(i);

ADF 処理の設定

//MAIN BUNDLE PROPERTIES
Bundle bMain = new Bundle();
bMain.putString("PROFILE_NAME","ProfileTest");
bMain.putString("PROFILE_ENABLED","true");
bMain.putString("CONFIG_MODE","CREATE_IF_NOT_EXIST");

//PLUGIN_CONFIG BUNDLE PROPERTIES
Bundle bConfig = new Bundle();
bConfig.putString("PLUGIN_NAME","ADF");
bConfig.putString("RESET_CONFIG","true");
bConfig.putString("OUTPUT_PLUGIN_NAME","KEYSTROKE");
bConfig.putString("adf_enabled","true");

//PARAM_LIST BUNDLE PROPERTIES
//RULE BUNDLE PROPERTIES
Bundle bParamsRule1 = new Bundle();
bParamsRule1.putString("name","Rule1");
bParamsRule1.putString("enabled","true");
bParamsRule1.putString("alldevices","true");
bParamsRule1.putString("string","abc");
bParamsRule1.putString("string_pos","2");
bParamsRule1.putString("string_len","4");

//ACTION BUNDLE PROPERTIES
Bundle bParamsAction1 = new Bundle();
bParamsAction1.putString("type","SEND_NEXT");
bParamsAction1.putString("action_param_1","5");


//ACTION BUNDLE PROPERTIES
Bundle bParamsAction2 = new Bundle();
bParamsAction2.putString("type","SKIP_BACK");

//DEVICE BUNDLE PROPERTIES
Bundle bParamsDevice1 = new Bundle();
bParamsDevice1.putString("device_id","BARCODE");
bParamsDevice1.putString("enabled","true");
bParamsDevice1.putString("alldecoders","false");
bParamsDevice1.putString("all_label_ids","false");

//DEVICE BUNDLE PROPERTIES
Bundle bParamsDevice2 = new Bundle();
bParamsDevice2.putString("device_id","MSR");
bParamsDevice2.putString("enabled","true");

//DEVICE BUNDLE PROPERTIES
Bundle bParamsDevice3 = new Bundle();
bParamsDevice3.putString("device_id","SIMULSCAN");
bParamsDevice3.putString("enabled","true");

//DECODER BUNDLE PROPERTIES
Bundle bParamsDecoders1 = new Bundle();
bParamsDecoders1.putString("device_id","BARCODE");
bParamsDecoders1.putString("decoder","Australian Postal");
bParamsDecoders1.putString("enabled","true");

//DECODER BUNDLE PROPERTIES
Bundle bParamsDecoders2 = new Bundle();
bParamsDecoders2.putString("device_id","BARCODE");
bParamsDecoders2.putString("decoder","Bookland");
bParamsDecoders2.putString("enabled","false");

//DECODER BUNDLE PROPERTIES
Bundle bParamsDecoders3 = new Bundle();
bParamsDecoders3.putString("device_id","BARCODE");
bParamsDecoders3.putString("decoder","Codebar");
bParamsDecoders3.putString("enabled","true");

//LABEL ID BUNDLE PROPERTIES
Bundle bParamsLabelID1 = new Bundle();
bParamsLabelID1.putString("device_id","BARCODE");
bParamsLabelID1.putString("label_id","UDI_GS1");
bParamsLabelID1.putString("enabled","true");

//LABEL ID BUNDLE PROPERTIES
Bundle bParamsLabelID2 = new Bundle();
bParamsLabelID2.putString("device_id","BARCODE");
bParamsLabelID2.putString("label_id","UDI_HIBCC");
bParamsLabelID2.putString("enabled","true");

ArrayList<Bundle> bParamsActionList = new ArrayList<Bundle>();
bParamsActionList.add(bParamsAction1);
bParamsActionList.add(bParamsAction2);

ArrayList<Bundle> bParamsDeviceList = new ArrayList<Bundle>();
bParamsDeviceList.add(bParamsDevice1);
bParamsDeviceList.add(bParamsDevice2);
bParamsDeviceList.add(bParamsDevice3);

ArrayList<Bundle> bParamsDecoderList = new ArrayList<Bundle>();
bParamsDecoderList.add(bParamsDecoders1);
bParamsDecoderList.add(bParamsDecoders2);
bParamsDecoderList.add(bParamsDecoders3);

ArrayList<Bundle> bParamsLabelIDList = new ArrayList<Bundle>();
bParamsLabelIDList.add(bParamsLabelID1);
bParamsLabelIDList.add(bParamsLabelID2);

bParamsRule1.putParcelableArrayList("ACTIONS",bParamsActionList);
bParamsRule1.putParcelableArrayList("DEVICES",bParamsDeviceList);
bParamsRule1.putParcelableArrayList("DECODERS",bParamsDecoderList);
bParamsRule1.putParcelableArrayList("LABEL_IDS",bParamsLabelIDList);

Bundle bParamsRule2 = new Bundle();
bParamsRule2.putString("name","Rule30");
bParamsRule2.putString("enabled","true");
bParamsRule2.putString("alldevices","true");
bParamsRule2.putString("string","cde");
bParamsRule2.putString("string_pos","3");
bParamsRule2.putString("string_len","5");

ArrayList<Bundle> bParamsList = new ArrayList<Bundle>();
bParamsList.add(bParamsRule1);
bParamsList.add(bParamsRule2);

bConfig.putParcelableArrayList("PARAM_LIST", bParamsList);

bMain.putBundle("PLUGIN_CONFIG", bConfig);

Intent i = new Intent();
i.setAction("com.symbol.datawedge.api.ACTION");
i.putExtra("com.symbol.datawedge.api.SET_CONFIG", bMain);
i.putExtra("SEND_RESULT","LAST_RESULT");
// i.putExtra("SEND_RESULT", "true");  // For versions prior to DataWedge 7.1
i.putExtra("COMMAND_IDENTIFIER", "ADF_API");
this.sendBroadcast(i);

// GET RESULT CODE
public void onReceive(Context context, Intent intent){

String command = intent.getStringExtra("COMMAND");
String commandidentifier = intent.getStringExtra("COMMAND_IDENTIFIER");
String result = intent.getStringExtra("RESULT");

Bundle bundle = new Bundle();
String resultInfo = "";
if(intent.hasExtra("RESULT_INFO")){
    bundle = intent.getBundleExtra("RESULT_INFO");
    Set<String> keys = bundle.keySet();
    for (String key: keys) {
        resultInfo += key + ": "+bundle.getString(key) + "\n";
    }
}

String text = "Command: "+command+"\n" +
        "Result: " +result+"\n" +
        "Result Info: " +resultInfo + "\n" +
        "CID:"+commandidentifier;
Toast.makeText(context, text, Toast.LENGTH_LONG).show();
};

TOKEN 処理の設定

// SetConfig [Start]
Bundle bMain = new Bundle();

Bundle bConfigToken = new Bundle();
Bundle bParamsToken = new Bundle();

bParamsToken.putString("send_tokens_option", "BARCODES_TOKENS"); // Supported Values: DISABLED, TOKENS, BARCODES_TOKENS
bParamsToken.putString("token_separator", "LF"); //Supported Values:None, TAB, CR, LF, NONE
bParamsToken.putString("multibarcode_separator", "LF"); //Supported Values:None, TAB, CR, LF, NONE

Bundle tokenOrder_manufacturing_date_original = new Bundle();
tokenOrder_manufacturing_date_original.putString("name", "manufacturing_date_original");
tokenOrder_manufacturing_date_original.putString("enabled", "true");

Bundle tokenOrder_expiration_date_original = new Bundle();
tokenOrder_expiration_date_original.putString("name", "expiration_date_original");
tokenOrder_expiration_date_original.putString("enabled", "true");

Bundle tokenOrder_di = new Bundle();
tokenOrder_di.putString("name", "di");
tokenOrder_di.putString("enabled", "true");

Bundle tokenOrder_lot_number = new Bundle();
tokenOrder_lot_number.putString("name", "lot_number");
tokenOrder_lot_number.putString("enabled", "true");


Bundle tokenOrder_serial_number = new Bundle();
tokenOrder_serial_number.putString("name", "serial_number");
tokenOrder_serial_number.putString("enabled", "true");


Bundle tokenOrder_mpho_lot_number = new Bundle();
tokenOrder_mpho_lot_number.putString("name", "mpho_lot_number");
tokenOrder_mpho_lot_number.putString("enabled", "true");


Bundle tokenOrder_donation_id = new Bundle();
tokenOrder_donation_id.putString("name", "donation_id");
tokenOrder_donation_id.putString("enabled", "true");

Bundle tokenOrder_labeler_identification_code = new Bundle();
tokenOrder_labeler_identification_code.putString("name", "labeler_identification_code");
tokenOrder_labeler_identification_code.putString("enabled", "true");


Bundle tokenOrder_product_or_catalog_number = new Bundle();
tokenOrder_product_or_catalog_number.putString("name", "product_or_catalog_number");
tokenOrder_product_or_catalog_number.putString("enabled", "true");

Bundle tokenOrder_unit_of_measure_id = new Bundle();
tokenOrder_unit_of_measure_id.putString("name", "unit_of_measure_id");
tokenOrder_unit_of_measure_id.putString("enabled", "false");

Bundle tokenOrder_quantity = new Bundle();
tokenOrder_quantity.putString("name", "quantity");
tokenOrder_quantity.putString("enabled", "false");


// Specify the token order
ArrayList<Bundle> tokenOrderList = new ArrayList<>();
tokenOrderList.add(tokenOrder_manufacturing_date_original);
tokenOrderList.add(tokenOrder_expiration_date_original);
tokenOrderList.add(tokenOrder_lot_number);
tokenOrderList.add(tokenOrder_di);
tokenOrderList.add(tokenOrder_serial_number);
tokenOrderList.add(tokenOrder_mpho_lot_number);
tokenOrderList.add(tokenOrder_donation_id);
tokenOrderList.add(tokenOrder_labeler_identification_code);
tokenOrderList.add(tokenOrder_product_or_catalog_number);
tokenOrderList.add(tokenOrder_unit_of_measure_id);
tokenOrderList.add(tokenOrder_quantity);


bParamsToken.putParcelableArrayList("token_order", tokenOrderList);


bConfigToken.putString("PLUGIN_NAME", "TOKEN");
bConfigToken.putString("OUTPUT_PLUGIN_NAME", "KEYSTROKE"); // Tokens are supported only in KEYSTROKE and IP plugins only
bConfigToken.putString("RESET_CONFIG", "true");
bConfigToken.putBundle("PARAM_LIST", bParamsToken);

bMain.putBundle("PLUGIN_CONFIG", bConfigToken);

bMain.putString("PROFILE_NAME", "Profile007");
bMain.putString("PROFILE_ENABLED", "true");
bMain.putString("CONFIG_MODE", "CREATE_IF_NOT_EXIST");

Intent iSetConfig = new Intent();
iSetConfig.setAction("com.symbol.datawedge.api.ACTION");
iSetConfig.putExtra("com.symbol.datawedge.api.SET_CONFIG", bMain);
iSetConfig.putExtra("SEND_RESULT", "LAST_RESULT");
iSetConfig.putExtra("COMMAND_IDENTIFIER", "INTENT_API");
// SetConfig [End]

this.sendBroadcast(iSetConfig);

キーストローク出力の設定

@Override
protected void onCreate(Bundle savedInstanceState) {
    super.onCreate(savedInstanceState);
    setContentView(R.layout.activity_main);
    registerReceivers();
}

@Override
protected void onResume() {
    super.onResume();
    setKeystrokeOutputPluginConfiguration();
}

private void registerReceivers() {
    IntentFilter filter = new IntentFilter();
    filter.addAction("com.symbol.datawedge.api.RESULT_ACTION");
    filter.addCategory("android.intent.category.DEFAULT");
    registerReceiver(datawedgeKeystrokeNIntentStatusBR, filter);
}

private BroadcastReceiver datawedgeKeystrokeNIntentStatusBR = new BroadcastReceiver() {
    @Override
    public void onReceive(Context context, Intent intent) {
        String command = intent.getStringExtra("COMMAND").equals("") ? "EMPTY" : intent.getStringExtra("COMMAND");
        String commandIdentifier = intent.getStringExtra("COMMAND_IDENTIFIER").equals("") ? "EMPTY" : intent.getStringExtra("COMMAND_IDENTIFIER");
        String result = intent.getStringExtra("RESULT").equals("") ? "EMPTY" : intent.getStringExtra("RESULT");

        Bundle bundle;
        String resultInfo = "";
        if (intent.hasExtra("RESULT_INFO")) {
            bundle = intent.getBundleExtra("RESULT_INFO");
            Set<String> keys = bundle.keySet();
            for (String key : keys) {
                resultInfo += key + ": " + bundle.getString(key) + "\n";
            }
        }

         String text="\n"+"Command:      " + command + "\n" +
                          "Result:       " + result + "\n" +
                          "Result Info:  " + resultInfo + "\n" +
                          "CID:          " + commandIdentifier;

        Log.d("TAG”,text);
    }
};

public void setKeystrokeOutputPluginConfiguration() {

    Bundle configBundle = new Bundle();
    configBundle.putString("PROFILE_NAME","UserProfile");
    configBundle.putString("PROFILE_ENABLED","true");
    configBundle.putString("CONFIG_MODE","CREATE_IF_NOT_EXIST");

    Bundle bConfig = new Bundle();

    bConfig.putString("PLUGIN_NAME", "KEYSTROKE");
    Bundle bParams = new Bundle();
    bParams.putString("keystroke_output_enabled","true");
    bParams.putString("keystroke_action_char","9"); // 0, 9 , 10, 13
    bParams.putString("keystroke_delay_extended_ascii","500");
    bParams.putString("keystroke_delay_control_chars","800");
    bConfig.putBundle("PARAM_LIST", bParams);

    configBundle.putBundle("PLUGIN_CONFIG", bConfig);

    Intent i = new Intent();
    i.setAction("com.symbol.datawedge.api.ACTION");
    i.putExtra("com.symbol.datawedge.api.SET_CONFIG", configBundle);
        i.putExtra("SEND_RESULT","LAST_RESULT");
        // i.putExtra("SEND_RESULT", "true");  // For versions prior to DataWedge 7.1
    i.putExtra("COMMAND_IDENTIFIER", "KEYSTROKE_API");
    this.sendBroadcast(i);
}

@Override
protected void onDestroy() {
    super.onDestroy();
    unregisterReceiver(datawedgeKeystrokeNIntentStatusBR);
}

IP 出力の設定

// SetConfig [Start]
Bundle bMain = new Bundle();

Bundle bConfigIPOutput = new Bundle();
Bundle bParamsIPOutput = new Bundle();
bParamsIPOutput.putString("ip_output_enabled", "true");
bParamsIPOutput.putString("ip_output_ip_wedge_enabled", "false");
bParamsIPOutput.putString("ip_output_protocol", "UDP"); //Supported Values: TCP: UDP
bParamsIPOutput.putString("ip_output_address", "192.168.0.1"); //Supported Values : IP Address format
bParamsIPOutput.putString("ip_output_port", "55555"); //Supported Values : 1 - 65535

bConfigIPOutput.putString("PLUGIN_NAME", "IP");
bConfigIPOutput.putString("RESET_CONFIG", "true");
bConfigIPOutput.putBundle("PARAM_LIST", bParamsIPOutput);

ArrayList<Bundle> bundlePluginConfig = new ArrayList<>();
bundlePluginConfig.add(bConfigIPOutput);
bMain.putParcelableArrayList("PLUGIN_CONFIG", bundlePluginConfig);


bMain.putString("PROFILE_NAME", "Profile007");
bMain.putString("PROFILE_ENABLED", "true");
bMain.putString("CONFIG_MODE", "CREATE_IF_NOT_EXIST");

Intent iSetConfig = new Intent();
iSetConfig.setAction("com.symbol.datawedge.api.ACTION");
iSetConfig.putExtra("com.symbol.datawedge.api.SET_CONFIG", bMain);
iSetConfig.putExtra("SEND_RESULT", "LAST_RESULT");
iSetConfig.putExtra("COMMAND_IDENTIFIER", "INTENT_API");
// SetConfig [End]

this.sendBroadcast(iSetConfig);

INTENT 出力の設定

@Override
protected void onCreate(Bundle savedInstanceState) {
    super.onCreate(savedInstanceState);
    setContentView(R.layout.activity_main);
    registerReceivers();
}

@Override
protected void onResume() {
    super.onResume();
    setIntentOutputPluginConfiguration();
}

private void registerReceivers() {
    IntentFilter filter = new IntentFilter();
    filter.addAction("com.symbol.datawedge.api.RESULT_ACTION");
    filter.addCategory("android.intent.category.DEFAULT");
    registerReceiver(datawedgeKeystrokeNIntentStatusBR, filter);
}

private BroadcastReceiver datawedgeKeystrokeNIntentStatusBR = new BroadcastReceiver() {
    @Override
    public void onReceive(Context context, Intent intent) {
        String command = intent.getStringExtra("COMMAND").equals("") ? "EMPTY" : intent.getStringExtra("COMMAND");
        String commandIdentifier = intent.getStringExtra("COMMAND_IDENTIFIER").equals("") ? "EMPTY" : intent.getStringExtra("COMMAND_IDENTIFIER");
        String result = intent.getStringExtra("RESULT").equals("") ? "EMPTY" : intent.getStringExtra("RESULT");

        Bundle bundle;
        String resultInfo = "";
        if (intent.hasExtra("RESULT_INFO")) {
            bundle = intent.getBundleExtra("RESULT_INFO");
            Set<String> keys = bundle.keySet();
            for (String key : keys) {
                resultInfo += key + ": " + bundle.getString(key) + "\n";
            }
        }
        String text ="\n" + "Command:      " + command + "\n" +
                            "Result:       " + result + "\n" +
                            "Result Info:  " + resultInfo + "\n" +
                            "CID:          " + commandIdentifier;
        Log.d("TAG”,text);
    }
};

public void setIntentOutputPluginConfiguration() {

    Bundle bMain = new Bundle();
    Bundle bConfig = new Bundle();
    Bundle bParams = new Bundle();

    bParams.putString("intent_output_enabled","true");
    bParams.putString("intent_action","com.symbol.dwudiusertokens.udi");
    bParams.putString("intent_category","zebra.intent.dwudiusertokens.UDI");
    bParams.putInt("intent_delivery",2); //Use "0" for Start Activity, "1" for Start Service, "2" for Broadcast

    bConfig.putString("PLUGIN_NAME", "INTENT");
    bConfig.putString("RESET_CONFIG","false");
    bConfig.putBundle("PARAM_LIST", bParams);

    bMain.putBundle("PLUGIN_CONFIG", bConfig);
    bMain.putString("PROFILE_NAME","UserProfile");
    bMain.putString("PROFILE_ENABLED","true");
    bMain.putString("CONFIG_MODE","CREATE_IF_NOT_EXIST");

    Intent i = new Intent();
    i.setAction("com.symbol.datawedge.api.ACTION");
    i.putExtra("com.symbol.datawedge.api.SET_CONFIG",bMain);
        i.putExtra("SEND_RESULT","LAST_RESULT");
        // i.putExtra("SEND_RESULT", "true");  // For versions prior to DataWedge 7.1
        i.putExtra("COMMAND_IDENTIFIER", "INTENT_API");
    this.sendBroadcast(i);
}

@Override
protected void onDestroy() {
    super.onDestroy();
    unregisterReceiver(datawedgeKeystrokeNIntentStatusBR);
}

インテント出力のコンポーネント情報の設定

Bundle bMain = new Bundle();

ArrayList<Bundle> bundlePluginConfig = new ArrayList<>();

Bundle bConfigIntent = new Bundle();
Bundle bParamsIntent = new Bundle();
bParamsIntent.putString("intent_output_enabled", "true");
bParamsIntent.putString("intent_action", "com.zebra.myapplication");
bParamsIntent.putString("intent_category", "android.intent.category.DEFAULT");

ArrayList<Bundle> bundleComponentInfo = new ArrayList<Bundle>();

Bundle component0 = new Bundle();
component0.putString("PACKAGE_NAME","com.symbol.test");
component0.putString("SIGNATURE","E22084421EAE1A65EEBCB68D4341FE3C2BB6BEC9D");
bundleComponentInfo.add(component0);

Bundle component1 = new Bundle();
component1.putString("PACKAGE_NAME","com.symbol.testpackage");
component1.putString("SIGNATURE","E22084421EAE1A65EEBCB68D4341FE3C2BB6BEC9");
bundleComponentInfo.add(component1);

Bundle component2 = new Bundle();
component2.putString("PACKAGE_NAME","com.symbol.test");
component2.putString("SIGNATURE","E22084421EAE1A65EEBCB68D4341FE3C2BB6BEC9E");
bundleComponentInfo.add(component2);

bParamsIntent.putParcelableArrayList("intent_component_info", bundleComponentInfo);

bConfigIntent.putString("PLUGIN_NAME", "INTENT");
bConfigIntent.putString("RESET_CONFIG", "true");
bConfigIntent.putBundle("PARAM_LIST", bParamsIntent);

bundlePluginConfig.add(bConfigIntent);
bMain.putParcelableArrayList("PLUGIN_CONFIG", bundlePluginConfig);

bMain.putString("PROFILE_NAME", "Profile009");
bMain.putString("PROFILE_ENABLED", "true");
bMain.putString("CONFIG_MODE", "CREATE_IF_NOT_EXIST");

Intent iSetConfig = new Intent();

iSetConfig.setAction("com.symbol.datawedge.api.ACTION");
iSetConfig.putExtra("com.symbol.datawedge.api.SET_CONFIG", bMain);
iSetConfig.putExtra("SEND_RESULT", "LAST_RESULT");
iSetConfig.putExtra("COMMAND_IDENTIFIER", "SET_INTENT_OUTPUT");

this.sendBroadcast(iSetConfig);

アプリケーション署名の SHA1 の取得

インテント出力のコンポーネント情報からアプリケーション書名の SHA1 ハッシュ値を取得します。

import android.content.Context;
import android.content.pm.PackageManager;
import android.content.pm.Signature;
import java.security.MessageDigest;
import java.security.NoSuchAlgorithmException;

public class SignatureCheck {

    void main(Context context)
    {
        try {
            Signature[] signatures = context.getPackageManager().getPackageInfo(context.getPackageName(), PackageManager.GET_SIGNATURES).signatures;
            for (Signature sig : signatures) {
                String sha1Signature = getSHA1(sig.toByteArray());
            }
        }

        catch (PackageManager.NameNotFoundException e) {
            e.printStackTrace();
        }
    }

    public static String getSHA1(byte[] sig)
    {
        MessageDigest digest = null;
        try {
            digest = MessageDigest.getInstance("SHA1");
        }
        catch (NoSuchAlgorithmException e) {
            e.printStackTrace();
        }
        digest.update(sig);
        byte[] hashtext = digest.digest();
        return bytesToHex(hashtext);
    }

    public static String bytesToHex(byte[] bytes)
    {
        final char[] hexArray = {'0', '1', '2', '3', '4', '5', '6', '7', '8',
                '9', 'A', 'B', 'C', 'D', 'E', 'F'};
        char[] hexChars = new char[bytes.length * 2];
        int v;
        for (int j = 0; j < bytes.length; j++) {
            v = bytes[j] & 0xFF;
            hexChars[j * 2] = hexArray[v >>> 4];
            hexChars[j * 2 + 1] = hexArray[v & 0x0F];
        }
        return new String(hexChars);
    }
}

結果コードの設定/取得

コマンドおよび構成インテント パラメータは、結果コードを送信するかどうかを決定します (デフォルトでは無効)。SEND_RESULT を使用する場合は、結果コードと元のインテントを照合するために、COMMAND_IDENTIFIER を使用します。こうしたパラメータの使用方法のサンプルを以下に示します。

注: 使用する API と一致するように、この汎用コードを変更する必要があります。

// send the intent
    Intent i = new Intent();
    i.setAction(ACTION);
    i.putExtra("com.symbol.datawedge.api.CREATE_PROFILE", "Profile1");

// request and identify the result code
    i.putExtra("SEND_RESULT","LAST_RESULT");

// i.putExtra("SEND_RESULT", "true"); //DataWedge 7.1 より前のバージョンの場合 i.putExtra("COMMAND_IDENTIFIER","123456789"); this.sendBroadcast(i);

// register to receive the result
    public void onReceive(Context context, Intent intent){

        String command = intent.getStringExtra("COMMAND");
        String commandidentifier = intent.getStringExtra("COMMAND_IDENTIFIER");
        String result = intent.getStringExtra("RESULT");

        Bundle bundle = new Bundle();
        String resultInfo = "";
        if(intent.hasExtra("RESULT_INFO")){
            bundle = intent.getBundleExtra("RESULT_INFO");
            Set<String> keys = bundle.keySet();
            for (String key: keys) {
                resultInfo += key + ": "+bundle.getString(key) + "\n";
            }
        }

        String text = "Command: "+command+"\n" +
                      "Result: " +result+"\n" +
                      "Result Info: " +resultInfo + "\n" +
                      "CID:"+commandidentifier;

        Toast.makeText(context, text, Toast.LENGTH_LONG).show();

    };

スキャン用の内部イメージャの使用

Bundle bConfig = new Bundle();

bConfig.putString("PLUGIN_NAME","BARCODE");

Bundle bParams = new Bundle();
bParams.putString("scanner_input_enabled", "true");
//
// auto or valid scanner identifier:
//
bParams.putString("scanner_selection_by_identifier", "INTERNAL_IMAGER");
bConfig.putBundle("PARAM_LIST",bParams);

文字間遅延の構成

private Integer ctrlCharacterDelayValue;
private Integer genericCharacterDelayValue;
private Boolean flagExtendedASCIIOnly;

@Override
protected void onCreate(Bundle savedInstanceState) {
    super.onCreate(savedInstanceState);
    setContentView(R.layout.activity_main);

    registerReceivers();
    ctrlCharacterDelayValue = null;
    genericCharacterDelayValue = null;
    flagExtendedASCIIOnly = null;
}

private void registerReceivers() {
    IntentFilter filter = new IntentFilter();
    filter.addAction("com.symbol.datawedge.api.RESULT_ACTION");
    filter.addCategory(Intent.CATEGORY_DEFAULT);
    registerReceiver(broadcastReceiver, filter);
}

@Override
protected void onDestroy() {
    super.onDestroy();
    unregisterReceiver(broadcastReceiver);
}

//Set configuration
public void setKeystrokeOutputPluginConfiguration(View v) {

    Bundle configBundle = new Bundle();
    configBundle.putString("PROFILE_NAME","Profile0 (default)");
    configBundle.putString("PROFILE_ENABLED","true");
    configBundle.putString("CONFIG_MODE","UPDATE");

    Bundle bConfig = new Bundle();

    bConfig.putString("PLUGIN_NAME", "KEYSTROKE");
    Bundle bParams = new Bundle();
    bParams.putString("keystroke_output_enabled","true");
    if(ctrlCharacterDelayValue!=null){
        bParams.putString("keystroke_delay_control_chars",ctrlCharacterDelayValue+"");
    }
    if(genericCharacterDelayValue !=null){
        bParams.putString("keystroke_character_delay", genericCharacterDelayValue +"");
    }
    if(flagExtendedASCIIOnly!=null){
        bParams.putString("keystroke_delay_multibyte_chars_only", flagExtendedASCIIOnly +"");
    }

    bConfig.putBundle("PARAM_LIST", bParams);
    configBundle.putBundle("PLUGIN_CONFIG", bConfig);

    Intent i = new Intent();
    i.setAction("com.symbol.datawedge.api.ACTION");
    i.putExtra("com.symbol.datawedge.api.SET_CONFIG", configBundle);
        i.putExtra("SEND_RESULT","LAST_RESULT");
        // i.putExtra("SEND_RESULT", "true");  // For versions prior to DataWedge 7.1
    i.putExtra("COMMAND_IDENTIFIER", "KEYSTROKE_API");
    this.sendBroadcast(i);
    }

//broadcast receiver
private BroadcastReceiver broadcastReceiver = new BroadcastReceiver() {
    @Override
    public void onReceive(Context context, Intent intent) {
        String action = intent.getAction();
        Log.d(TAG, "#DataWedge-APP# Action: " + action);


    //result of set config
        if(action.equals("com.symbol.datawedge.api.RESULT_ACTION")){
            Bundle extrasBundle = intent.getExtras();
            Set<String> keys = extrasBundle.keySet();
            if(keys!=null&&keys.contains("RESULT")){
                String result = (String)extrasBundle.get("RESULT");
                Log.d(TAG,"Result:"+result);
                //get additional info
                Bundle resultInforBundle = (Bundle) extrasBundle.get("RESULT_INFO");
                Object resultCode = resultInforBundle.get("RESULT_CODE");
                if(resultCode instanceof String){
                    String code = (String)resultCode;
                    Log.d(TAG,"Code:"+code);
                }else if(resultCode instanceof String[]){
                    String[] codesArray = (String[])resultCode;
                    if(codesArray!=null){
                        for(String code : codesArray){
                            Log.d(TAG,"Code:"+code);
                        }
                    }
                }
            }

        }//end result of set config
    }//end onReceive
};

単一インテントにおける複数モジュール (フル プロファイル) 用の構成の設定

DataWedge 7.1 でサポートが開始されました。以前の DataWedge バージョンでは、複数モジュール (プラグイン、APP_LIST、および Data Capture Plus) の構成の設定に、複数のインテント呼び出しが必要でした。

@Override
protected void onCreate(Bundle savedInstanceState) {
        super.onCreate(savedInstanceState);
        setContentView(R.layout.activity_main);

        IntentFilter filter = new IntentFilter();
        filter.addAction("com.symbol.datawedge.api.RESULT_ACTION");
        filter.addCategory("android.intent.category.DEFAULT");
        registerReceiver(broadcastReceiver, filter);
        setConfig();
}

public void setConfig() {

        /**
        * Setting configuration for:
        * Intent Output Plugin
        * Barcode Input Plugin
        * MSR input Plugin
        * IP Output Plugin
        * Tokens for IP Output Plugin
        * Application Association
        * DCP (Data Capture Plus)
        */

        // SetConfig [Start]
        Bundle bMain = new Bundle();

        Bundle bConfigIntent = new Bundle();
        Bundle bParamsIntent = new Bundle();
        bParamsIntent.putString("intent_output_enabled", "true");
        bParamsIntent.putString("intent_action", "com.symbol.dwudiusertokens.udi");
        bParamsIntent.putString("intent_category", "zebra.intent.dwudiusertokens.UDI");
        bParamsIntent.putInt("intent_delivery", 5); //Use "0" for Start Activity, "1" for Start Service, "2" for Broadcast, "3" for start foreground service
        bConfigIntent.putString("PLUGIN_NAME", "INTENT");
        bConfigIntent.putString("RESET_CONFIG", "false");
        bConfigIntent.putBundle("PARAM_LIST", bParamsIntent);

        Bundle bConfigSimulScan = new Bundle();
        Bundle bParamsSimulScan = new Bundle();
        bParamsSimulScan.putString("simulscan_input_enabled", "true");
        bParamsSimulScan.putString("simulscan_input_source", "Imager"); //Supported values: Camera, Imager, Default
        bParamsSimulScan.putString("simulscan_region_separator", "TAB"); //Supported Values:None, TAB, CR, LF, NONE
        bParamsSimulScan.putString("simulscan_log_dir", "/storage/zebra/intent/");
        bParamsSimulScan.putString("simulscan_enable_timestamp", "true");

        Bundle templateParamsBundle = new Bundle();
        templateParamsBundle.putString("dynamic_quantity", "99");
        bParamsSimulScan.putString("simulscan_template", "UserDefinedQuantity.xml"); // Ex:  UserDefinedQuantity.xml, Default - BankCheck.xml, Default - Barcode 1.xml, Default - Barcode 10.xml, Default - Barcode 2.xml, Default - Barcode 4.xml, Default - Barcode 5.xml, Default - BookNumber.xml, Default - DocCap + Optional Barcode.xml, Default - DocCap + Required Barcode.xml, Default - TravelDoc.xml, Default - Unstructured Multi-Line.xml, Default - Unstructured Single Line.xml
        bParamsSimulScan.putBundle("simulscan_template_params",templateParamsBundle);

        bConfigSimulScan.putString("PLUGIN_NAME", "SIMULSCAN");
        bConfigSimulScan.putString("RESET_CONFIG", "false");
        bConfigSimulScan.putBundle("PARAM_LIST", bParamsSimulScan);

        Bundle bConfigBarcode = new Bundle();
        Bundle bParamsBarcode = new Bundle();
        bParamsBarcode.putString("scanner_selection","auto");
        bParamsBarcode.putString("scanner_input_enabled","true");
        bConfigBarcode.putString("PLUGIN_NAME", "BARCODE");
        bConfigBarcode.putString("RESET_CONFIG", "false");
        bConfigBarcode.putBundle("PARAM_LIST", bParamsBarcode);

        Bundle bConfigMSR = new Bundle();
        Bundle bParamsMSR = new Bundle();
        bParamsMSR.putString("msr_input_enabled", "true");
        bConfigMSR.putString("PLUGIN_NAME", "MSR");
        bConfigMSR.putString("RESET_CONFIG", "false");
        bConfigMSR.putBundle("PARAM_LIST", bParamsMSR);

        Bundle bConfigIPOutput = new Bundle();
        Bundle bParamsIPOutput = new Bundle();
        bParamsIPOutput.putString("ip_output_enabled", "true");
        bParamsIPOutput.putString("ip_output_ip_wedge_enabled", "false");
        bParamsIPOutput.putString("ip_output_protocol", "UDP"); //Supported Values: TCP: UDP
        bParamsIPOutput.putString("ip_output_address", "192.168.0.1"); //Supported Values : IP Address format
        bParamsIPOutput.putString("ip_output_port", "55555"); //Supported Values : 1 - 65535

        bConfigIPOutput.putString("PLUGIN_NAME", "IP");
        bConfigIPOutput.putString("RESET_CONFIG", "false");
        bConfigIPOutput.putBundle("PARAM_LIST", bParamsIPOutput);

        Bundle bConfigToken = new Bundle();
        Bundle bParamsToken = new Bundle();

        bParamsToken.putString("send_tokens_option", "BARCODES_TOKENS"); // Supported Values: DISABLED, TOKENS, BARCODES_TOKENS
        bParamsToken.putString("token_separator", "LF"); //Supported Values:None, TAB, CR, LF, NONE
        bParamsToken.putString("multibarcode_separator", "LF"); //Supported Values:None, TAB, CR, LF, NONE

        Bundle tokenOrder_manufacturing_date_original = new Bundle();
        tokenOrder_manufacturing_date_original.putString("name","manufacturing_date_original");
        tokenOrder_manufacturing_date_original.putString("enabled","true");

        Bundle tokenOrder_expiration_date_original = new Bundle();
        tokenOrder_expiration_date_original.putString("name","expiration_date_original");
        tokenOrder_expiration_date_original.putString("enabled","true");

        Bundle tokenOrder_di = new Bundle();
        tokenOrder_di.putString("name","di");
        tokenOrder_di.putString("enabled","true");

        Bundle tokenOrder_lot_number = new Bundle();
        tokenOrder_lot_number.putString("name","lot_number");
        tokenOrder_lot_number.putString("enabled","true");

        Bundle tokenOrder_serial_number = new Bundle();
        tokenOrder_serial_number.putString("name","serial_number");
        tokenOrder_serial_number.putString("enabled","true");

        Bundle tokenOrder_mpho_lot_number = new Bundle();
        tokenOrder_mpho_lot_number.putString("name","mpho_lot_number");
        tokenOrder_mpho_lot_number.putString("enabled","true");

        Bundle tokenOrder_donation_id = new Bundle();
        tokenOrder_donation_id.putString("name","donation_id");
        tokenOrder_donation_id.putString("enabled","true");

        Bundle tokenOrder_labeler_identification_code = new Bundle();
        tokenOrder_labeler_identification_code.putString("name","labeler_identification_code");
        tokenOrder_labeler_identification_code.putString("enabled","true");

        Bundle tokenOrder_product_or_catalog_number = new Bundle();
        tokenOrder_product_or_catalog_number.putString("name","product_or_catalog_number");
        tokenOrder_product_or_catalog_number.putString("enabled","true");

        Bundle tokenOrder_unit_of_measure_id = new Bundle();
        tokenOrder_unit_of_measure_id.putString("name","unit_of_measure_id");
        tokenOrder_unit_of_measure_id.putString("enabled","true");

        Bundle tokenOrder_quantity = new Bundle();
        tokenOrder_quantity.putString("name","quantity");
        tokenOrder_quantity.putString("enabled","false");

        ArrayList<Bundle> tokenOrderList = new ArrayList<>();
        tokenOrderList.add(tokenOrder_manufacturing_date_original);
        tokenOrderList.add(tokenOrder_expiration_date_original);
        tokenOrderList.add(tokenOrder_lot_number);
        tokenOrderList.add(tokenOrder_di);
        tokenOrderList.add(tokenOrder_serial_number);
        tokenOrderList.add(tokenOrder_mpho_lot_number);
        tokenOrderList.add(tokenOrder_donation_id);
        tokenOrderList.add(tokenOrder_labeler_identification_code);
        tokenOrderList.add(tokenOrder_product_or_catalog_number);
        tokenOrderList.add(tokenOrder_unit_of_measure_id);
        tokenOrderList.add(tokenOrder_quantity);

        bParamsToken.putParcelableArrayList("token_order", tokenOrderList);

        bConfigToken.putString("PLUGIN_NAME", "TOKEN");
        bConfigToken.putString("OUTPUT_PLUGIN_NAME","IP");
        bConfigToken.putString("RESET_CONFIG", "true");
        bConfigToken.putBundle("PARAM_LIST", bParamsToken);

        ArrayList<Bundle> bundlePluginConfig = new ArrayList<>();
        bundlePluginConfig.add(bConfigIntent);
        bundlePluginConfig.add(bConfigBarcode);
        bundlePluginConfig.add(bConfigSimulScan);
        bundlePluginConfig.add(bConfigMSR);
        bundlePluginConfig.add(bConfigIPOutput);
        bundlePluginConfig.add(bConfigToken);

        bMain.putParcelableArrayList("PLUGIN_CONFIG", bundlePluginConfig);

        //AppList[Start]
        Bundle bundleApp1 = new Bundle();
        bundleApp1.putString("PACKAGE_NAME", "com.symbol.emdk.simulscansample1");
        bundleApp1.putStringArray("ACTIVITY_LIST", new String[]{
                        "com.symbol.emdk.simulscansample1.DeviceControl",
                        "com.symbol.emdk.simulscansample1.MainActivity",
                        "com.symbol.emdk.simulscansample1.ResultsActivity",
                        "com.symbol.emdk.simulscansample1.ResultsActivity2",
                        "com.symbol.emdk.simulscansample1.SettingsFragment1"});

        Bundle bundleApp2 = new Bundle();
        bundleApp2.putString("PACKAGE_NAME", "com.example.intents.datawedgeintent");
        bundleApp2.putStringArray("ACTIVITY_LIST", new String[]{
                        "com.example.intents.datawedgeintent.DeviceControl",
                        "com.example.intents.datawedgeintent.MainActivity",
                        "com.example.intents.datawedgeintent.ResultsActivity",
                        "com.example.intents.datawedgeintent.SettingsFragment1"});

        Bundle bundleApp3 = new Bundle();
        bundleApp3.putString("PACKAGE_NAME", "com.symbol.pubudu");
        bundleApp3.putStringArray("ACTIVITY_LIST", new String[]{"*"});

        Bundle bundleApp4 = new Bundle();
        bundleApp4.putString("PACKAGE_NAME", "com.symbol.myzebraapp");
        bundleApp4.putStringArray("ACTIVITY_LIST", new String[]{"*"});

        // ADD APP_LIST BUNDLE(S) INTO THE MAIN BUNDLE
        bMain.putParcelableArray("APP_LIST", new Bundle[]{
                        bundleApp1
                        , bundleApp2
                        , bundleApp3
                        , bundleApp4
        });

        // AppList [End]

        Bundle bConfigDCP = new Bundle();
        Bundle bParamsDCP = new Bundle();
        bParamsDCP.putString("dcp_input_enabled", "true");
        bParamsDCP.putString("dcp_dock_button_on", "LEFT"); //Supported values: BOTH - Left or Right, LEFT - Left only, RIGHT - Right only
        bParamsDCP.putString("dcp_start_in", "FULLSCREEN"); //Supported Values: FULLSCREEN, BUTTON, BUTTON_ONLY
        bParamsDCP.putString("dcp_highest_pos", "10"); //Supported Values:  0 - 100
        bParamsDCP.putString("dcp_lowest_pos", "20"); //Supported Values: 0 - 100
        bParamsDCP.putString("dcp_drag_detect_time", "501"); //Supported Values: 0 - 1000
        bConfigDCP.putString("RESET_CONFIG", "true");
        bConfigDCP.putBundle("PARAM_LIST", bParamsDCP);

        bMain.putBundle("DCP", bConfigDCP);

        bMain.putString("PROFILE_NAME", "Profile007");
        bMain.putString("PROFILE_ENABLED", "true");
        bMain.putString("CONFIG_MODE", "CREATE_IF_NOT_EXIST");

        Intent iSetConfig = new Intent();
        iSetConfig.setAction("com.symbol.datawedge.api.ACTION");
        iSetConfig.putExtra("com.symbol.datawedge.api.SET_CONFIG", bMain);
        iSetConfig.putExtra("SEND_RESULT", "COMPLETE_RESULT"); //Supported values: NONE, LAST_RESULT, COMPLETE_RESULT
        iSetConfig.putExtra("COMMAND_IDENTIFIER", "INTENT_API");
        //SetConfig [End]

        this.sendBroadcast(iSetConfig);
}

private BroadcastReceiver broadcastReceiver = new BroadcastReceiver() {
        @Override
        public void onReceive(Context context, Intent intent) {
                String action = intent.getAction();

                String strFinalResult = "";
                String command = intent.getStringExtra("COMMAND");
                String profileName = intent.getStringExtra("PROFILE_NAME");
                String resultInfo = "";

                if (action.equals("com.symbol.datawedge.api.RESULT_ACTION")) {

                        if (intent.hasExtra("RESULT_LIST")) { // returns for COMPLETE_RESULT
                                resultInfo += "ProfileName: " + profileName + "\n";
                                ArrayList<Bundle> result_list = (ArrayList)intent.getSerializableExtra("RESULT_LIST");
                                for (Bundle bundleResult : result_list) {

                                        resultInfo +="\n\n";

                                        Set<String> keys = bundleResult.keySet();
                                        for (String key : keys) {
                                                String val = bundleResult.getString(key);
                                                if (val == null) {

                                                        if (bundleResult.getStringArray(key) != null) {
                                                                val = "";
                                                                for (String s : bundleResult.getStringArray(key)) {
                                                                        val += "" + s + "\n";
                                                                }
                                                        }
                                                }

                                                resultInfo += key + ": " + val + "\n";
                                        }
                                }
                        }

                        if (command != null) {
                                if (command.equalsIgnoreCase("com.symbol.datawedge.api.SET_CONFIG")) {
                                        Log.d("TAG", "#IntentApp# \n\nSetConfig status received:\nResultInfo: \n" + resultInfo);
                                }
                        }
                }
        }
};

グローバル スキャナ構成の設定

Bundle bConfig = new Bundle();
bConfig.putString("PLUGIN_NAME","BARCODE");

Bundle bParams = new Bundle();
bParams.putString("scanner_input_enabled", "true");
bParams.putString("configure_all_scanners", "true"); // configure for all scanners
bConfig.putBundle("PARAM_LIST", bParams);

プレゼンテーション モードの設定

// MAIN BUNDLE PROPERTIES
Bundle bMain = new Bundle();
bMain.putString("PROFILE_NAME", "Profile1");
bMain.putString("PROFILE_ENABLED", "true");
bMain.putString("CONFIG_MODE", "CREATE_IF_NOT_EXIST");

// PLUGIN_CONFIG BUNDLE PROPERTIES
Bundle bConfig = new Bundle();
bConfig.putString("PLUGIN_NAME", "BARCODE");
bConfig.putString("RESET_CONFIG", "true");

// PARAM_LIST BUNDLE PROPERTIES
Bundle bParams = new Bundle();

bParams.putString("scanner_selection_by_identifier", "INTERNAL_IMAGER");
bParams.putString("scanner_input_enabled" , "true");
bParams.putString("aim_type", "4"); // presentation mode
bParams.putString("scene_detect_qualifier ", "0"); // 0- None and 1- Proximity Sensor Input

…

bConfig.putBundle("PARAM_LIST", bParams);

bMain.putBundle("PLUGIN_CONFIG", bConfig);
Intent i = new Intent();
i.setAction("com.symbol.datawedge.api.ACTION");
i.putExtra("com.symbol.datawedge.api.SET_CONFIG", bMain);
this.sendBroadcast(i);

文字セット構成

// MAIN BUNDLE PROPERTIES
Bundle bMain = new Bundle();
bMain.putString("PROFILE_NAME", "ProfileCharSet");
bMain.putString("PROFILE_ENABLED", "true");
bMain.putString("CONFIG_MODE", "CREATE_IF_NOT_EXIST");

// PLUGIN_CONFIG BUNDLE PROPERTIES
Bundle bConfig = new Bundle();
bConfig.putString("PLUGIN_NAME", "BARCODE");
bConfig.putString("RESET_CONFIG", "true");

// PARAM_LIST BUNDLE PROPERTIES
Bundle bParams = new Bundle();
bParams.putString("scanner_selection_by_identifier", "INTERNAL_IMAGER");
bParams.putString("charset_name", "AUTO");
bParams.putString("auto_charset_preferred_order", "GB2312;UTF-8");
bParams.putString("auto_charset_failure_option", "UTF-8");

bConfig.putBundle("PARAM_LIST", bParams);
bMain.putBundle("PLUGIN_CONFIG", bConfig);

Intent i = new Intent();
i.setAction("com.symbol.datawedge.api.ACTION");
i.putExtra("com.symbol.datawedge.api.SET_CONFIG", bMain);
this.sendBroadcast(i);

エンタープライズ キーボード構成の設定

//SetConfig [Start] Bundle bMain = new Bundle(); Bundle bConfigEKB = new Bundle();

Bundle bParamsEKB = new Bundle();
bParamsEKB.putString("ekb_enabled", "true"); // Supported values: true/false
Bundle layoutParams = new Bundle();
layoutParams.putString("layout_group", "EKBCustomLayouts");
layoutParams.putString("layout_name", "qwerty");
bParamsEKB.putBundle("ekb_layout", layoutParams);
//bParamsEKB.putBundle("ekb_layout", null); // To set to default

bConfigEKB.putString("RESET_CONFIG", "false");
bConfigEKB.putBundle("PARAM_LIST", bParamsEKB);

bMain.putBundle("EKB", bConfigEKB);

bMain.putString("PROFILE_NAME", "ZebraEKB");
bMain.putString("PROFILE_ENABLED", "true");
bMain.putString("CONFIG_MODE", "CREATE_IF_NOT_EXIST");

Intent iSetConfig = new Intent();
iSetConfig.setAction("com.symbol.datawedge.api.ACTION");
iSetConfig.putExtra("com.symbol.datawedge.api.SET_CONFIG", bMain);
iSetConfig.putExtra("SEND_RESULT", "LAST_RESULT");
iSetConfig.putExtra("COMMAND_IDENTIFIER", "INTENT_API");
//SetConfig [End]

this.sendBroadcast(iSetConfig);

マルチスキャナ モードの設定

マルチスキャナ モードを設定および構成します。スキャナ パラメータ リストは、ArrayList が渡されることによって複数の構成をサポートするように拡張されています。単一のスキャナをサポートしている場合は、スキャナ パラメータ リストとしてバンドル データ タイプが渡されます。

Bundle bMain = new Bundle();
bMain.putString("PROFILE_NAME", "Profile009");
bMain.putString("PROFILE_ENABLED", "true");
bMain.putString("CONFIG_MODE", "CREATE_IF_NOT_EXIST");

Bundle bConfig = new Bundle();
bConfig.putString("PLUGIN_NAME","BARCODE");
bConfig.putString("RESET_CONFIG","true");
bConfig.putString("SCANNER_INPUT_ENABLED","true");

//LEFT, RIGHT, CENTER, GUN, PROXIMITY
//AUTO,INTERNAL_IMAGER,INTERNAL_LASER,INTERNAL_CAMERA,SERIAL_SSI,BLUETOOTH_SSI,BLUETOOTH_RS6000,BLUETOOTH_DS2278,BLUETOOTH_DS3678,PLUGABLE_SSI,PLUGABLE_SSI_RS5000,USB_SSI_DS3608
Bundle scanner1Params = new Bundle();
scanner1Params.putString("scanner_selection_by_identifier", "INTERNAL_IMAGER");
scanner1Params.putStringArray("scanner_trigger_resource", new String[]{"LEFT", "RIGHT"}); //Required triggers
scanner1Params.putString("decoder_code11", "true");
scanner1Params.putString("decoder_code39", "false");
scanner1Params.putString("picklist", "1");

Bundle scanner2Params = new Bundle();
scanner2Params.putString("scanner_selection_by_identifier", "BLUETOOTH_RS6000");
scanner2Params.putStringArray("scanner_trigger_resource", new String[]{"CENTER"}); //Required triggers
scanner2Params.putString("decoder_code11", "true");
scanner2Params.putString("decoder_code128", "false");
scanner2Params.putString("picklist", "2");

ArrayList<Bundle> scannerParamList = new ArrayList<>();
scannerParamList.add(scanner1Params);
scannerParamList.add(scanner2Params);

bConfig.putParcelableArrayList("PARAM_LIST", scannerParamList);

bMain.putBundle("PLUGIN_CONFIG", bConfig); //true, false
Intent i = new Intent();
i.setAction("com.symbol.datawedge.api.ACTION");
i.putExtra("com.symbol.datawedge.api.SET_CONFIG", bMain);
i.putExtra("SEND_RESULT","LAST_RESULT");
i.putExtra("COMMAND_IDENTIFIER", "SET_CONFIG");
this.sendBroadcast(i);

関連項目:

Zebra Support Central | インテグレータ ガイド、製品マニュアル、ソフトウェア ダウンロードおよびサポート

LaunchPad | Zebra 開発者コミュニティ

インテント | Android 開発者

インテントおよびインテント フィルタ | Android 開発者

Android インテント | チュートリアル