SettingsHelperUtilZmotif Interface |
Namespace: Zebra.Sdk.Card.Zmotif.Settings
The SettingsHelperUtilZmotif type exposes the following members.
Name | Description | |
---|---|---|
GetActiveLUTTable |
Returns the active calibration table identifier.
| |
GetCalibrationTableData |
Returns the specified calibration table data.
| |
GetCalibrationTableNames |
Returns the stored calibration table names and data.
| |
GetCapabilities |
Returns the specified capabilities of the printer.
| |
GetCleaningInterval |
Returns the cleaning interval for the specified path.
| |
GetCleanWarningThreshold |
Returns the clean printer warning threshold.
| |
GetConfiguration |
Returns the configuration of the printer.
| |
GetContactlessSmartCardOffset |
Returns the offset value for the specified contactless smart card encoder type.
| |
GetCustomCardConfiguration |
Returns the configuration of the specified custom card.
| |
GetErrorControlLevel |
Returns the printer's current error control handling mode.
| |
GetHeadResistance |
Returns the printhead resistance value.
| |
GetImageTransferType |
Returns the printer's image transfer type.
| |
GetLaminatorOffset |
Returns the specified laminator offset value.
| |
GetMagneticEncoderOffsets |
Returns the magnetic encoder offset values.
| |
GetNetworkParameters |
Returns the printer's network information.
| |
GetOcpParameters |
Returns the printer's OCP configuration.
| |
GetPanelPowerLevel |
Returns the power level of the specific panel.
| |
GetSmartCardOffset |
Returns the smart card offset value.
| |
GetStandbyTimeout |
Returns the printer's current standby timeout value.
| |
GetTransferTemperatureOffset |
Returns the transfer temperature offset value for the specified sensor.
| |
GetWirelessParameters |
Returns the printer's wireless network information.
| |
LoadCalibrationTableData |
Loads the calibration table data to the printer.
| |
SetActiveLUTTable |
Sets the calibration table to be used by the printer.
| |
SetCleaningInterval |
Sets the the cleaning interval for the specified path.
| |
SetCleanWarningThreshold |
Sets the clean warning threshold of the printer.
| |
SetConfiguration |
Sets the configuration of the printer.
| |
SetContactlessSmartCardOffset |
Sets the contactless smart card encoding position offset value.
| |
SetCustomCardConfiguration |
Sets the custom card configuration.
| |
SetErrorControlLevel |
Sets the printer's error control handling mode.
| |
SetHeadResistance |
Sets the printhead resistance value.
| |
SetLaminatorOffset |
Sets the sepcified laminator offset value.
| |
SetMagneticEncoderOffsets |
Sets the magnetic encoder offsets values.
| |
SetNetworkParameters |
Sets the printer's network configuration information.
| |
SetOcpParameters |
Sets the printers OCP configuration.
| |
SetPanelPowerLevel |
Sets the specificed ribbon panel's power level.
| |
SetSmartCardOffset |
Sets the contact smart card encoding position offset value.
| |
SetStandbyTimeout |
Sets the printer's standby timeout value.
| |
SetTransferTemperatureOffset |
Sets the transfer temperature offset value for the specified sensor.
| |
SetWirelessParameters |
Sets the printer's wireless network information.
|