ZebraCardSettingNamesZmotif Fields |
The ZebraCardSettingNamesZmotif type exposes the following members.
Fields| Name | Description | |
|---|---|---|
  | ACTIVE_LUT |
Active LUT.
|
| BEMF_POTENTIOMETER |
BEMF potentiometer.
|
| CAL_LUT_1 |
Calibration LUT 1 prefix.
|
| CAL_LUT_2 |
Calibration LUT 2 prefix.
|
| CAL_LUT_CURRENT_NAME |
Calibration LUT current name.
|
| CAL_LUT_DEFAULT_NAME |
Calibration LUT default name.
|
| CAL_LUT_TYPE |
Calibration LUT type.
|
| CARD_CENTER_X_OFFSET |
Card center x-offset.
|
| CARD_CENTER_Y_OFFSET |
Card center y-offset.
|
| CARD_FEEDER_MODE |
Card feeder mode.
|
| CARD_PART_NUMBER |
Custom card part number.
|
| CARD_TRANSFER_END_Y_OFFSET |
Card transfer end y-offset.
|
| CARD_TRANSFER_ROLL_Y_OFFSET |
Card transfer roll y-offset.
|
| CARD_TRANSFER_START_Y_OFFSET |
Card transfer start y-offset.
|
| CLEAN_ALCOHOL_CARD_THRESHOLD |
Clean with alcohol card threshold level.
|
| CLEAN_DEADLINE_ENFORCEMENT |
Clean printer deadline enforcment level.
|
| CLEAN_LAMINATOR_HEATED_ROLLERS |
Clean laminator heated rollers threshold.
|
| CLEAN_LAMINATOR_X_CARD_PATH |
Clean laminator x-direction card path threshold.
|
| CLEAN_PRE_WARNING_THRESHOLD |
Clean pre-warning threshold.
|
| CLEAN_PRINTHEAD_LAPPING |
Clean printhead lapping threshold.
|
| CLEAN_PRINTHEAD_LAPPING_ENABLE |
Clean printhead lapping enabled threshold.
|
| CLEAN_TRANSFER_ROLLERS |
Clean transfer rollers threshold.
|
| CLEAN_Y_CARD_PATH |
Clean y-direction card path threshold.
|
| CLOCK_DAY |
Clock day.
|
| CLOCK_HOUR |
Clock hour.
|
| CLOCK_MINUTE |
Clock minute.
|
| CLOCK_MONTH |
Clock month.
|
| CLOCK_YEAR |
Clock year.
|
| CUSTOM_CARD_1 |
Custom card 1 prefix.
|
| CUSTOM_CARD_2 |
Custom card 2 prefix.
|
| CUSTOM_CARD_COERCIVITY |
Custom card coercivity information.
|
| CUSTOM_CARD_CONTACT_ENCODE |
Custom card contact smartcard information.
|
| CUSTOM_CARD_CONTACTLESS_ENCODE |
Custom card contactless smartcard information.
|
| CUSTOM_CARD_DESCRIPTION |
Custom card description.
|
| CUSTOM_CARD_LAM_ADJ_BOTTOM_TEMP |
Custom card laminator bottom temperature adjustment.
|
| CUSTOM_CARD_LAM_ADJ_SPEED |
Custom card laminator speed adjustment.
|
| CUSTOM_CARD_LAM_ADJ_TOP_TEMP |
Custom card laminator top temperature adjustment.
|
| CUSTOM_CARD_MAG_STRIPE |
Custom card magnetic stripe information.
|
| CUSTOM_CARD_THICKNESS |
Custom card thickness.
|
| CUSTOM_CARD_TYPE |
Custom card type.
|
| CUSTOM_CARD_XFER_SPEED_INPUT_DOUBLE |
Custom card transfer speed input double sided.
|
| CUSTOM_CARD_XFER_SPEED_INPUT_DOUBLE_UV |
Custom card UV transfer speed input double sided.
|
| CUSTOM_CARD_XFER_SPEED_INPUT_SINGLE |
Custom card transfer speed input single sided.
|
| CUSTOM_CARD_XFER_SPEED_INPUT_SINGLE_UV |
Custom card UV transfer speed input single sided.
|
| CUSTOM_CARD_XFER_SPEED_OUTPUT_DOUBLE |
Custom card transfer speed output double sided.
|
| CUSTOM_CARD_XFER_SPEED_OUTPUT_DOUBLE_UV |
Custom card UV transfer speed output double sided.
|
| CUSTOM_CARD_XFER_SPEED_OUTPUT_SINGLE |
Custom card transfer speed output single sided.
|
| CUSTOM_CARD_XFER_SPEED_OUTPUT_SINGLE_UV |
Custom card UV transfer speed output single sided.
|
| CUSTOM_CARD_XFER_TEMP_BOTTOM_DOUBLE |
Custom card transfer temperature bottom double sided.
|
| CUSTOM_CARD_XFER_TEMP_BOTTOM_SINGLE |
Custom card transfer temperature bottom single sided.
|
| CUSTOM_CARD_XFER_TEMP_TOP_DOUBLE |
Custom card transfer temperature top double sided.
|
| CUSTOM_CARD_XFER_TEMP_TOP_SINGLE |
Custom card transfer temperature top single sided.
|
| CYAN_SPEED_ADJUST |
Cyan print speed adjustment.
|
| CYAN_X_OFFSET |
Cyan print x-offset.
|
| DEFAULT_WIRED_ADDRESS |
Default wired IP address.
|
| DEFAULT_WIRED_GATEWAY |
Default wired Gateway address.
|
| DEFAULT_WIRED_SUBNET |
Default wired Subnet mask.
|
| ERROR_CONTROL_LEVEL |
Error control level.
|
| FILM_DESCRIPTION |
Film description.
|
| FILM_END_ROLL_TRANSFER_OFFSET |
Film end roll transfer offset.
|
| FILM_EXTRA_TRANSFER_TAKEUP_MOVE |
Film extra transfer takeup move.
|
| FILM_INITIAL_SIZE |
Film initial size.
|
| FILM_OEM |
Film OEM code.
|
| FILM_PANELS_REMAINING |
Film panels remaining.
|
| FILM_PRINT_X_OFFSET |
Film print x-offset.
|
| FILM_PRINT_Y_OFFSET |
Film print y-offset.
|
| FILM_TRANSFER_START_OFFSET |
Film transfer start offset.
|
| FILM_TYPE |
Film type.
|
| FLIPPER_SENSOR_OFFSET |
Flipper sensor offset.
|
| FLUX_CORRECTION |
Flux correction.
|
| INTERNAL_ENCODER_CHANNEL |
Internal encoder communication channel.
|
| INTERNAL_ENCODER_DEVICE_CLASS |
Internal smartcard encoder device class.
|
| INTERNAL_ENCODER_MANUFACTURER |
Internal smartcard encoder manufacturer.
|
| INTERNAL_ENCODER_PRODUCT |
Internal smartcard encoder product.
|
| INTERNAL_ENCODER_PRODUCT_ID |
Internal smartcard product id.
|
| INTERNAL_ENCODER_VENDOR_ID |
Internal smartcard encoder vendor id.
|
| K_COLOR_SPEED_ADJUST |
K-color print speed adjustment.
|
| K_COLOR_X_OFFSET |
K-color print x-offset.
|
| K_MONO_SPEED_ADJUST |
K-mono print speed adjustment.
|
| K_MONO_X_OFFSET |
K-mono print x-offset.
|
| KIOSK_MODE |
Kiosk mode.
|
| LAMINATE_ADJ_BOTTOM_TEMP |
Laminate temperature adjustment bottom.
|
| LAMINATE_ADJ_BOTTOM_X_FINE_OFFSET |
Laminate fine x-offset adjustment bottom.
|
| LAMINATE_ADJ_COARSE_X_OFFSET |
Laminate coarse x-offset adjustment.
|
| LAMINATE_ADJ_PASSTHRU_SPEED |
Laminate pass-thru speed adjustment.
|
| LAMINATE_ADJ_PATCH_LEN |
Laminate patch length adjustment.
|
| LAMINATE_ADJ_SPEED |
Laminate speed adjustment.
|
| LAMINATE_ADJ_TOP_TEMP |
Laminate temperature adjustment top.
|
| LAMINATE_ADJ_TOP_X_FINE_OFFSET |
Laminate fine x-offset adjustment top.
|
| LAMINATE_BOTTOM_DESCRIPTION |
Laminate description bottom.
|
| LAMINATE_BOTTOM_INITIAL_SIZE |
Laminate initial size bottom.
|
| LAMINATE_BOTTOM_OEM |
Laminate OEM bottom.
|
| LAMINATE_BOTTOM_PANELS_REMAINING |
Laminate panels remaining bottom.
|
| LAMINATE_BOTTOM_REGISTRATION |
Laminate registration bottom.
|
| LAMINATE_BOTTOM_THICKNESS |
Laminate thickness bottom.
|
| LAMINATE_BOTTOM_TYPE |
Laminate type bottom.
|
| LAMINATE_BOTTOM_WIDTH |
Laminate width bottom.
|
| LAMINATE_TOP_DESCRIPTION |
Laminate description top.
|
| LAMINATE_TOP_INITIAL_SIZE |
Laminate initial size top.
|
| LAMINATE_TOP_OEM |
Laminate OEM top.
|
| LAMINATE_TOP_PANELS_REMAINING |
Laminate panels remaining top.
|
| LAMINATE_TOP_REGISTRATION |
Laminate registration top.
|
| LAMINATE_TOP_THICKNESS |
Laminate thickness top.
|
| LAMINATE_TOP_TYPE |
Laminate type top.
|
| LAMINATE_TOP_WIDTH |
Laminate width top.
|
| LCD_DISPLAY_AVAILABLE |
Indicates whether or not the printer has a display panel.
|
| MAG_ENCODE_SPEED_ADJUST |
Magnetic encode speed adjustment.
|
| MAG_TRACK_1_START_SENTINEL_CORRECTION |
Mag track 1 start sentinel correction.
|
| MAG_TRACK_2_START_SENTINEL_CORRECTION |
Mag track 2 start sentinel correction.
|
| MAG_TRACK_3_START_SENTINEL_CORRECTION |
Mag track 3 start sentinel correction.
|
| MAGENTA_SPEED_ADJUST |
Magenta print speed adjustment.
|
| MAGENTA_X_OFFSET |
Magenta print x-offset.
|
| MFG_PANEL_POWER_ADJ_CYAN |
Manufacturing cyan panel power adjustment.
|
| MFG_PANEL_POWER_ADJ_HELPER |
Manufacturing helper panel power adjustment.
|
| MFG_PANEL_POWER_ADJ_INHIBIT |
Manufacturing inhibit panel power adjustment.
|
| MFG_PANEL_POWER_ADJ_KDYE |
Manufacturing k-dye panel power adjustment.
|
| MFG_PANEL_POWER_ADJ_KRESIN_BACK |
Manufacturing k-resin panel power adjustment back.
|
| MFG_PANEL_POWER_ADJ_KRESIN_FRONT |
Manufacturing k-resin panel power adjustment front.
|
| MFG_PANEL_POWER_ADJ_MAGENTA |
Manufacturing magenta panel power adjustment.
|
| MFG_PANEL_POWER_ADJ_OVERLAY |
Manufacturing overlay panel power adjustment.
|
| MFG_PANEL_POWER_ADJ_UV_BACK |
Manufacturing uv panel power adjustment back.
|
| MFG_PANEL_POWER_ADJ_UV_FRONT |
Manufacturing uv panel power adjustment front.
|
| MFG_PANEL_POWER_ADJ_X_RESIN |
Manufacturing x-resin panel power adjustment.
|
| MFG_PANEL_POWER_ADJ_YELLOW |
Manufacturing yellow panel power adjustment.
|
| MFG_PRINT_SPEED_ADJUST |
Manufacturing print speed adjustment.
|
| MONOX_SPEED_ADJUST |
Monox print speed adjustment.
|
| MONOX_X_OFFSET |
MONOX print x-offset.
|
| OCP_LANGUAGE_NAME |
OCP language name.
|
| OCP_LANGUAGE_TYPE |
OCP language type.
|
| OVERLAY_SPEED_ADJUST |
Overlay print speed adjustment.
|
| OVERLAY_X_OFFSET |
Overlay print x-offset.
|
| PLATEN_TEMPERATURE_OFFSET |
Platen temperature offset.
|
| PRINTER_SPEED |
Printer speed.
|
| RIBBON_MOTOR_TAKEUP_K0 |
Ribbon motor takeup K0.
|
| RIBBON_MOTOR_TAKEUP_KA |
Ribbon motor takeup KA.
|
| RIBBON_MOTOR_TAKEUP_KB |
Ribbon motor takeup KB.
|
| RIBBON_MOTOR_TAKEUP_M0 |
Ribbon motor takeup M0.
|
| RIBBON_MOTOR_TAKEUP_MA |
Ribbon motor takeup MA.
|
| RIBBON_MOTOR_TAKEUP_MB |
Ribbon motor takeup MB.
|
| RIBBON_MOTOR_TAKEUP_S0 |
Ribbon motor takeup S0.
|
| RIBBON_MOTOR_TAKEUP_VTOI |
Ribbon motor takeup VtoI.
|
| RIBBON_SENSOR_OFFSET |
Ribbon sensor offset.
|
| RIBBON_SYNCH_ENABLE |
Enable ribbon synchronization on power up and door closing.
|
| RIBBON_TENSION_H_PAYOUT_IDLE |
Ribbon Helper idle payout tension.
|
| RIBBON_TENSION_H_TAKEUP_IDLE |
Ribbon Helper idle takeup tension.
|
| RIBBON_TENSION_H_TAKEUP_POSTPRINT_EMPTY |
Ribbon empty Helper post-print takeup tension.
|
| RIBBON_TENSION_H_TAKEUP_POSTPRINT_FULL |
Ribbon full Helper post-print takeup tension.
|
| RIBBON_TENSION_H_TAKEUP_PREPRINT_EMPTY |
Ribbon empty Helper pre-print takeup tension.
|
| RIBBON_TENSION_H_TAKEUP_PREPRINT_FULL |
Ribbon full Helper pre-print takeup tension.
|
| RIBBON_TENSION_H_TAKEUP_PRINT_EMPTY |
Ribbon empty Helper print takeup tension.
|
| RIBBON_TENSION_H_TAKEUP_PRINT_FULL |
Ribbon full Helper print takeup tension.
|
| RIBBON_TENSION_I_PAYOUT_IDLE |
Ribbon Inhibit idle payout tension.
|
| RIBBON_TENSION_I_TAKEUP_IDLE |
Ribbon Inhibit idle takeup tension.
|
| RIBBON_TENSION_I_TAKEUP_POSTPRINT_EMPTY |
Ribbon empty Inhibit print takeup tension.
|
| RIBBON_TENSION_I_TAKEUP_POSTPRINT_FULL |
Ribbon full Inhibit print takeup tension.
|
| RIBBON_TENSION_I_TAKEUP_PREPRINT_EMPTY |
Ribbon empty Inhibit pre-print takeup tension.
|
| RIBBON_TENSION_I_TAKEUP_PREPRINT_FULL |
Ribbon full Inhibit pre-print takeup tension.
|
| RIBBON_TENSION_I_TAKEUP_PRINT_EMPTY |
Ribbon empty Inhibit print takeup tension.
|
| RIBBON_TENSION_I_TAKEUP_PRINT_FULL |
Ribbon full Inhibit print takeup tension.
|
| RIBBON_TENSION_K_PAYOUT_IDLE |
Ribbon Monochrome idle payout tension.
|
| RIBBON_TENSION_K_TAKEUP_IDLE |
Ribbon Monochrome idle takeup tension.
|
| RIBBON_TENSION_K_TAKEUP_POSTPRINT_EMPTY |
Ribbon empty Monochrome post-print takeup tension.
|
| RIBBON_TENSION_K_TAKEUP_POSTPRINT_FULL |
Ribbon full Monochrome post-print takeup tension.
|
| RIBBON_TENSION_K_TAKEUP_PREPRINT_EMPTY |
Ribbon empty Monochrome pre-print takeup tension.
|
| RIBBON_TENSION_K_TAKEUP_PREPRINT_FULL |
Ribbon full Monochrome pre-print takeup tension.
|
| RIBBON_TENSION_K_TAKEUP_PRINT_EMPTY |
Ribbon empty Monochrome print takeup tension.
|
| RIBBON_TENSION_K_TAKEUP_PRINT_FULL |
Ribbon full Monochrome print takeup tension.
|
| RIBBON_TENSION_O_PAYOUT_IDLE |
Ribbon Overlay idle payout tension.
|
| RIBBON_TENSION_O_TAKEUP_IDLE |
Ribbon Overlay idle takeup tension.
|
| RIBBON_TENSION_O_TAKEUP_POSTPRINT_EMPTY |
Ribbon empty Overlay post-print takeup tension.
|
| RIBBON_TENSION_O_TAKEUP_POSTPRINT_FULL |
Ribbon full Overlay post-print takeup tension.
|
| RIBBON_TENSION_O_TAKEUP_PREPRINT_EMPTY |
Ribbon empty Overlay pre-print takeup tension.
|
| RIBBON_TENSION_O_TAKEUP_PREPRINT_FULL |
Ribbon full Overlay pre-print takeup tension.
|
| RIBBON_TENSION_O_TAKEUP_PRINT_EMPTY |
Ribbon empty Overlay print takeup tension.
|
| RIBBON_TENSION_O_TAKEUP_PRINT_FULL |
Ribbon full Overlay print takeup tension.
|
| RIBBON_TENSION_UV_PAYOUT_IDLE |
Ribbon UV idle payout tension.
|
| RIBBON_TENSION_UV_TAKEUP_IDLE |
Ribbon UV idle takeup tension.
|
| RIBBON_TENSION_UV_TAKEUP_POSTPRINT_EMPTY |
Ribbon empty UV post-print takeup tension.
|
| RIBBON_TENSION_UV_TAKEUP_POSTPRINT_FULL |
Ribbon full UV post-print takeup tension.
|
| RIBBON_TENSION_UV_TAKEUP_PREPRINT_EMPTY |
Ribbon empty UV pre-print takeup tension.
|
| RIBBON_TENSION_UV_TAKEUP_PREPRINT_FULL |
Ribbon full UV pre-print takeup tension.
|
| RIBBON_TENSION_UV_TAKEUP_PRINT_EMPTY |
Ribbon empty UV print takeup tension.
|
| RIBBON_TENSION_UV_TAKEUP_PRINT_FULL |
Ribbon full UV print takeup tension.
|
| RIBBON_TENSION_YMC_PAYOUT_IDLE |
Ribbon YMC idle payout tension.
|
| RIBBON_TENSION_YMC_TAKEUP_IDLE |
Ribbon YMC idle takeup tension.
|
| RIBBON_TENSION_YMC_TAKEUP_POSTPRINT_EMPTY |
Ribbon empty YMC post-print takeup tension.
|
| RIBBON_TENSION_YMC_TAKEUP_POSTPRINT_FULL |
Ribbon full YMC post-print takeup tension.
|
| RIBBON_TENSION_YMC_TAKEUP_PREPRINT_EMPTY |
Ribbon empty YMC pre-print takeup tension.
|
| RIBBON_TENSION_YMC_TAKEUP_PREPRINT_FULL |
Ribbon full YMC pre-print takeup tension.
|
| RIBBON_TENSION_YMC_TAKEUP_PRINT_EMPTY |
Ribbon empty YMC print takeup tension.
|
| RIBBON_TENSION_YMC_TAKEUP_PRINT_FULL |
Ribbon full YMC print takeup tension.
|
| SMARTCARD_HF_X_OFFSET |
Smart card HF encoder x-offset.
|
| SMARTCARD_LF_X_OFFSET |
Smart card LF encoder x-offset.
|
| SMARTCARD_MIFARE_X_OFFSET |
Smart card contactless encoder x-offset.
|
| SMARTCARD_UHF_X_OFFSET |
Smart card UHF encoder x-offset.
|
| STANDBY_TIMEOUT |
Standby timeout.
|
| TOTAL_LINES_PRINTED |
Total lines printed.
|
| TOTAL_PRINT_PASSES_COMPLETED |
Total print passes completed.
|
| TRANSFER_BOTTOM_TEMPERATURE_CALIBRATION |
Transfer bottom temperature calibration.
|
| TRANSFER_BOTTOM_TEMPERATURE_TILT |
Transfer bottom temperature tilt.
|
| TRANSFER_TEMPERATURE_BOTTOM_DOUBLE |
Transfer bottom temperature double sided.
|
| TRANSFER_TEMPERATURE_BOTTOM_DOUBLE_OFFSET |
Transfer bottom temperature offset double sided.
|
| TRANSFER_TEMPERATURE_BOTTOM_SINGLE |
Transfer bottom temperature single sided.
|
| TRANSFER_TEMPERATURE_BOTTOM_SINGLE_OFFSET |
Transfer bottom temperature offset single sided.
|
| TRANSFER_TEMPERATURE_TOP_DOUBLE |
Transfer top temperature double sided.
|
| TRANSFER_TEMPERATURE_TOP_DOUBLE_OFFSET |
Transfer top temperature offset double sided.
|
| TRANSFER_TEMPERATURE_TOP_SINGLE |
Transfer top temperature single sided.
|
| TRANSFER_TEMPERATURE_TOP_SINGLE_OFFSET |
Transfer top temperature offset single sided.
|
| TRANSFER_TOP_TEMPERATURE_CALIBRATION |
Transfer top temperature calibration.
|
| TRANSFER_TOP_TEMPERATURE_TILT |
Transfer top temperature tilt.
|
| TRANSFER_TYPE |
Transfer type.
|
| TRICOLOR_BLUE |
Tricolor blue sensor.
|
| TRICOLOR_CLEAR_TO_COLOR |
Tricolor clear to color sensor.
|
| TRICOLOR_GREEN |
Tricolor green sensor.
|
| TRICOLOR_RED |
Tricolor red sensor.
|
| USB_READ_TIMEOUT |
USB read operation timeout.
|
| USB_SPEED |
USB speed.
|
| USB_WRITE_TIMEOUT |
USB write operation timeout.
|
| USER_PANEL_POWER_ADJ_CYAN |
User cyan panel power adjustment.
|
| USER_PANEL_POWER_ADJ_HELPER |
User helper panel power adjustment.
|
| USER_PANEL_POWER_ADJ_INHIBIT |
User inhibit panel power adjustment.
|
| USER_PANEL_POWER_ADJ_KDYE |
User k-dye panel power adjustment.
|
| USER_PANEL_POWER_ADJ_KRESIN_BACK |
User k-resin panel power adjustment back.
|
| USER_PANEL_POWER_ADJ_KRESIN_FRONT |
User k-resin panel power adjustment front.
|
| USER_PANEL_POWER_ADJ_MAGENTA |
User magenta panel power adjustment.
|
| USER_PANEL_POWER_ADJ_OVERLAY |
User overlay panel power adjustment.
|
| USER_PANEL_POWER_ADJ_UV_BACK |
User uv panel power adjustment back.
|
| USER_PANEL_POWER_ADJ_UV_FRONT |
User uv panel power adjustment front.
|
| USER_PANEL_POWER_ADJ_X_RESIN |
User x-resin panel power adjustment.
|
| USER_PANEL_POWER_ADJ_YELLOW |
User yellow panel power adjustment.
|
| USER_PRINT_SPEED_ADJUST |
User print speed adjustment.
|
| UV_SPEED_ADJUST |
UV print speed adjustment.
|
| UV_X_OFFSET |
UV print x-offset.
|
| WIRED_DNS_NAME |
Wired DNS name.
|
| WIRED_IPV6_ADDRESS |
Wired IPV6 IP address.
|
| WIRED_SNMP |
Wired SNMP enabled.
|
| WIRELESS_ADDRESS |
Wireless IP address.
|
| WIRELESS_BSSID |
Wireless BSSID.
|
| WIRELESS_CHANNEL |
Wireless channel.
|
| WIRELESS_COUNTRY |
Wireless country.
|
| WIRELESS_CRYPTO |
Wireless cryptographic security type.
|
| WIRELESS_DHCP |
Wireless DHCP enabled.
|
| WIRELESS_GATEWAY |
Wireless Gateway address.
|
| WIRELESS_KEY |
Wireless security key.
|
| WIRELESS_MAC |
Wireless MAC address.
|
| WIRELESS_RADIO |
Wireless radio enabled.
|
| WIRELESS_SECURITY |
Wireless security type.
|
| WIRELESS_SNMP |
Wireless SNMP enabled.
|
| WIRELESS_SSID |
Wireless SSID name.
|
| WIRELESS_SUBNET |
Wireless Subnet mask.
|
| YELLOW_SPEED_ADJUST |
Yellow print speed adjustment.
|
| YELLOW_X_OFFSET |
Yellow print x-offset.
|
See Also