- SamBase - Class in com.symbol.emdk.securenfc
-
SamBase is the base class for all the SAM technologies supported.
- SamBase() - Constructor for class com.symbol.emdk.securenfc.SamBase
-
- samDiverseParams - Variable in class com.symbol.emdk.securenfc.MifareSam.AdditionalAuthData.AV1Mode
-
samDiverseParams Diversification parameters for current key.If
diversification is not required by current key then this
parameter should be NULL.
- SamDiverseParams - Class in com.symbol.emdk.securenfc
-
SAM diversification parameters
- SamDiverseParams() - Constructor for class com.symbol.emdk.securenfc.SamDiverseParams
-
- same_barcode_timeout - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.ReaderParams
-
Deprecated.
This setting is used to prevent the scanner driver from decoding the same symbol within this time interval (applicable only when
aim_type = AIM_TYPE.CONTINUOUS_READ).
- sameSymbolTimeout - Variable in class com.symbol.emdk.barcode.ScannerConfig.ReaderParams.ReaderSpecific.CameraSpecific
-
This setting is used to prevent the scanner driver from decoding the same symbol within this time interval.
- sameSymbolTimeout - Variable in class com.symbol.emdk.barcode.ScannerConfig.ReaderParams.ReaderSpecific.ContinuousRead
-
- sameSymbolTimeout - Variable in class com.symbol.emdk.barcode.ScannerConfig.ReaderParams.ReaderSpecific.ImagerSpecific
-
This setting is used to prevent the scanner driver from decoding the same symbol within this time interval.
- sameSymbolTimeout - Variable in class com.symbol.emdk.barcode.ScannerConfig.ReaderParams.ReaderSpecific.LaserSpecific
-
This setting is used to prevent the scanner driver from decoding the same symbol within this time interval.
- SamKey - Class in com.symbol.emdk.securenfc
-
Samkey class will be assigned with the keys present on the MifareSam and used
for the authentication purpose.
- SamKey() - Constructor for class com.symbol.emdk.securenfc.SamKey
-
- samMode - Variable in class com.symbol.emdk.securenfc.MifareSam.SamInfo
-
- scanAndPair(String) - Method in class com.symbol.emdk.scanandpair.ScanAndPairManager
-
This is an asynchronous method.
- ScanAndPairConfig - Class in com.symbol.emdk.scanandpair
-
The ScanAndPairConfig class provides a way to configure the settings to use it in scanAndPair() or scanAnUnpair() methods.
- ScanAndPairConfig.BluetoothInfo - Class in com.symbol.emdk.scanandpair
-
This class is used by the ScanAndPairTool class.
- ScanAndPairConfig.DeviceIdentifier - Enum in com.symbol.emdk.scanandpair
-
Provides the list of DeviceIdentifier types.
- ScanAndPairConfig.NotificationType - Enum in com.symbol.emdk.scanandpair
-
This enum is used by the ScanAndPair APIs to set the notification type.
- ScanAndPairConfig.ScanDataType - Enum in com.symbol.emdk.scanandpair
-
Provides the different types of barcode data to be scanned.
- ScanAndPairConfig.ScanInfo - Class in com.symbol.emdk.scanandpair
-
This class is used by the ScanAndPairTool class.
- ScanAndPairConfig.TriggerType - Enum in com.symbol.emdk.scanandpair
-
Provides the list of supported trigger types.
- ScanAndPairException - Exception in com.symbol.emdk.scanandpair
-
- ScanAndPairManager - Class in com.symbol.emdk.scanandpair
-
The ScanAndPair provides simple methods to scan a Bluetooth barcode (name or address) of a remote Bluetooth device
and pair/unpair with the remote Bluetooth device.
- ScanAndPairManager.StatusListener - Interface in com.symbol.emdk.scanandpair
-
An interface for notifying client applications to notify scan and pair or unpair events.
- ScanAndPairResults - Enum in com.symbol.emdk.scanandpair
-
Provides list of result codes for ScanAndPair class.
- scanAndUnpair() - Method in class com.symbol.emdk.scanandpair.ScanAndPairManager
-
This is an asynchronous method.
- ScanDataCollection - Class in com.symbol.emdk.barcode
-
The ScanDataCollection object gives scanning result and the collection of
ScanData.
- ScanDataCollection.LabelType - Enum in com.symbol.emdk.barcode
-
List of label types of the scanner data
- ScanDataCollection.ScanData - Class in com.symbol.emdk.barcode
-
The ScanData object gives information on the barcode data scanned.
- scanDataType - Variable in class com.symbol.emdk.scanandpair.ScanAndPairConfig.ScanInfo
-
Specifies the type of barcode data to be scanned.
- scanInfo - Variable in class com.symbol.emdk.scanandpair.ScanAndPairConfig
-
Specifies the scanning related information.
- ScanInfo() - Constructor for class com.symbol.emdk.scanandpair.ScanAndPairConfig.ScanInfo
-
Default Constructor for ScanInfo class to assign the default values to its members.
- scanMode - Variable in class com.symbol.emdk.barcode.ScannerConfig.ReaderParams.ReaderSpecific.ImagerSpecific
-
Sets the scan mode.
- Scanner - Class in com.symbol.emdk.barcode
-
Scanner class will represent and provides access to the physical scanner
device.
- Scanner.DataListener - Interface in com.symbol.emdk.barcode
-
An interface for notifying client applications when the scan data is
available.
- Scanner.StatusListener - Interface in com.symbol.emdk.barcode
-
An interface for notifying client applications to notify scan events.
- Scanner.TriggerType - Enum in com.symbol.emdk.barcode
-
List of supported trigger type
- scanner_input_enabled - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode
-
Deprecated.
- ScannerConfig - Class in com.symbol.emdk.barcode
-
The ScannerConfig class provides access to scanner configuration settings.
- ScannerConfig.AdaptiveScanning - Enum in com.symbol.emdk.barcode
-
Enable or Disable Adaptive scanning.
- ScannerConfig.AimingPattern - Enum in com.symbol.emdk.barcode
-
Describes the aiming pattern to be turned ON/OFF.
- ScannerConfig.AimType - Enum in com.symbol.emdk.barcode
-
Describes the type of aiming to use.
- ScannerConfig.AudioStreamType - Enum in com.symbol.emdk.barcode
-
Volume slider type for decode audio feedback.
- ScannerConfig.BeamWidth - Enum in com.symbol.emdk.barcode
-
Controls the beam width of a laser scanner.
- ScannerConfig.BooklandFormat - Enum in com.symbol.emdk.barcode
-
Lists the Bookland formats
- ScannerConfig.CheckDigit - Enum in com.symbol.emdk.barcode
-
The number of check digits to be verified.
- ScannerConfig.CheckDigitScheme - Enum in com.symbol.emdk.barcode
-
Two algorithms are possible for the verification of the second MSI check
digit.
- ScannerConfig.CheckDigitType - Enum in com.symbol.emdk.barcode
-
Verify data integrity.
- ScannerConfig.CodeIdType - Enum in com.symbol.emdk.barcode
-
A Code ID character identifies the code type of a scanned barcode.
- ScannerConfig.CouponReport - Enum in com.symbol.emdk.barcode
-
Supported Coupon modes
- ScannerConfig.DecodeAudioFeedbackMode - Enum in com.symbol.emdk.barcode
-
Describes the Audio Feedback Mode is given by the host device and remote scanner.
- ScannerConfig.DecodeLEDFeedbackMode - Enum in com.symbol.emdk.barcode
-
Describes the LED Feedback mode is given by the host device and remote scanner.
- ScannerConfig.DecoderParams - Class in com.symbol.emdk.barcode
-
The DecoderParams class contains decoder parameters that
are used by multiple decoder symbologies.
- ScannerConfig.DecoderParams.AustralianPostal - Class in com.symbol.emdk.barcode
-
The AustralianPostal class provides access to parameters that are
available for the AustralianPostal decoder.
- ScannerConfig.DecoderParams.Aztec - Class in com.symbol.emdk.barcode
-
The Aztec class provides access to parameters that are available for
the Aztec decoder.
- ScannerConfig.DecoderParams.BaseDecoder - Class in com.symbol.emdk.barcode
-
The BaseDecoder class is the parent decoder to all decoders and is
inherited by all decoders.
- ScannerConfig.DecoderParams.CanadianPostal - Class in com.symbol.emdk.barcode
-
The CanadianPostal class provides access to parameters that are
available for the CanadianPostal decoder.
- ScannerConfig.DecoderParams.Chinese2of5 - Class in com.symbol.emdk.barcode
-
The Chinese2of5 class provides access to parameters that are
available for the Chinese2of5 decoder.
- ScannerConfig.DecoderParams.CodaBar - Class in com.symbol.emdk.barcode
-
The CodaBar class provides access to parameters that are available
for the CodaBar decoder.
- ScannerConfig.DecoderParams.Code11 - Class in com.symbol.emdk.barcode
-
The Code11 class provides access to parameters that are available for
the Code11 decoder.
- ScannerConfig.DecoderParams.Code128 - Class in com.symbol.emdk.barcode
-
The Code128 class provides access to parameters that are available
for the Code128 decoder.
- ScannerConfig.DecoderParams.Code39 - Class in com.symbol.emdk.barcode
-
The Code39 class provides access to parameters that are available for
the Code39 decoder.
- ScannerConfig.DecoderParams.Code93 - Class in com.symbol.emdk.barcode
-
The Code93 class provides access to parameters that are available for
the Code93 decoder.
- ScannerConfig.DecoderParams.CompositeAB - Class in com.symbol.emdk.barcode
-
The CompositeAB class provides access to parameters that are
available for the CompositeAB decoder.
- ScannerConfig.DecoderParams.CompositeC - Class in com.symbol.emdk.barcode
-
The CompositeC class provides access to parameters that are
available for the CompositeC decoder.
- ScannerConfig.DecoderParams.D2of5 - Class in com.symbol.emdk.barcode
-
The D2OF5 class provides access to parameters that are available for
the D2OF5 decoder.
- ScannerConfig.DecoderParams.DataMatrix - Class in com.symbol.emdk.barcode
-
The DataMatrix class provides access to parameters that are available
for the DataMatrix decoder.
- ScannerConfig.DecoderParams.DutchPostal - Class in com.symbol.emdk.barcode
-
The DutchPostal class provides access to parameters that are
available for the DutchPostal decoder.
- ScannerConfig.DecoderParams.Ean13 - Class in com.symbol.emdk.barcode
-
The Ean13 class provides access to parameters that are available for
the Ean13 decoder.
- ScannerConfig.DecoderParams.Ean8 - Class in com.symbol.emdk.barcode
-
The Ean8 class provides access to parameters that are available for
the Ean8 decoder.
- ScannerConfig.DecoderParams.Gs1Databar - Class in com.symbol.emdk.barcode
-
The Gs1Databar class provides access to parameters that are available
for the GS1 Databar decoder.
- ScannerConfig.DecoderParams.Gs1DatabarExp - Class in com.symbol.emdk.barcode
-
The Gs1DatabarExp class provides access to parameters that are
available for the GS1 Databar Exp decoder.
- ScannerConfig.DecoderParams.Gs1DatabarLim - Class in com.symbol.emdk.barcode
-
The Gs1DatabarLim class provides access to parameters that are
available for the GS1 Databar Lim decoder.
- ScannerConfig.DecoderParams.HanXin - Class in com.symbol.emdk.barcode
-
The HanXin class provides access to parameters that are available for
the HanXin decoder.
- ScannerConfig.DecoderParams.I2of5 - Class in com.symbol.emdk.barcode
-
The I2of5 class provides access to parameters that are available for
the I2of5 decoder.
- ScannerConfig.DecoderParams.JapanesePostal - Class in com.symbol.emdk.barcode
-
The JapanesePostal class provides access to parameters that are
available for the JapanesePostal decoder.
- ScannerConfig.DecoderParams.Korean3of5 - Class in com.symbol.emdk.barcode
-
The Korean3of5 class provides access to parameters that are
available for the Korean3of5 decoder.
- ScannerConfig.DecoderParams.MailMark - Class in com.symbol.emdk.barcode
-
The MailMark class provides access to parameters that are available for
the MailMark decoder.
- ScannerConfig.DecoderParams.Matrix2of5 - Class in com.symbol.emdk.barcode
-
The Matrix2of5 class provides access to parameters that are
available for the Matrix2of5 decoder.
- ScannerConfig.DecoderParams.MaxiCode - Class in com.symbol.emdk.barcode
-
The MaxiCode class provides access to parameters that are available
for the MaxiCode decoder.
- ScannerConfig.DecoderParams.MicroPdf - Class in com.symbol.emdk.barcode
-
The MicroPdf class provides access to parameters that are available
for the MicroPdf decoder.
- ScannerConfig.DecoderParams.MicroQr - Class in com.symbol.emdk.barcode
-
The MicroQr class provides access to parameters that are available
for the MicroQr decoder.
- ScannerConfig.DecoderParams.Msi - Class in com.symbol.emdk.barcode
-
The Msi class provides access to parameters that are available for
the Msi decoder.
- ScannerConfig.DecoderParams.Pdf417 - Class in com.symbol.emdk.barcode
-
The Pdf417 class provides access to parameters that are available for
the Pdf417 decoder.
- ScannerConfig.DecoderParams.QrCode - Class in com.symbol.emdk.barcode
-
The QRCode class provides access to parameters that are available for
the QRCode decoder.
- ScannerConfig.DecoderParams.Signature - Class in com.symbol.emdk.barcode
-
The Signature class provides access to parameters that are available
for the Signature decoder.
- ScannerConfig.DecoderParams.Tlc39 - Class in com.symbol.emdk.barcode
-
The Tlc39 class provides access to parameters that are available for
the Tlc39 decoder.
- ScannerConfig.DecoderParams.TriOptic39 - Class in com.symbol.emdk.barcode
-
The TriOptic39 class provides access to parameters that are available
for the TriOptic39 decoder.
- ScannerConfig.DecoderParams.UkPostal - Class in com.symbol.emdk.barcode
-
The UkPostal class provides access to parameters that are available
for the UkPostal decoder.
- ScannerConfig.DecoderParams.Upca - Class in com.symbol.emdk.barcode
-
The Upca class provides access to parameters that are available for
the Upca decoder.
- ScannerConfig.DecoderParams.Upce0 - Class in com.symbol.emdk.barcode
-
The Upce0 class provides access to parameters that are available for
the Upce0 decoder.
- ScannerConfig.DecoderParams.Upce1 - Class in com.symbol.emdk.barcode
-
The Upce1 class provides access to parameters that are available for
the Upce1 decoder.
- ScannerConfig.DecoderParams.UpcEanParams - Class in com.symbol.emdk.barcode
-
The UPCEAN class provides access to parameters that are available for the UPC/EAN decoder.
- ScannerConfig.DecoderParams.Us4State - Class in com.symbol.emdk.barcode
-
The US4State class provides access to parameters that are available
for the US4State decoder.
- ScannerConfig.DecoderParams.Us4StateFics - Class in com.symbol.emdk.barcode
-
The Us4StateFics class provides access to parameters that are
available for the Us4StateFics decoder.
- ScannerConfig.DecoderParams.UsPlanet - Class in com.symbol.emdk.barcode
-
The UsPlanet class provides access to parameters that are available
for the UsPlanet decoder.
- ScannerConfig.DecoderParams.UsPostNet - Class in com.symbol.emdk.barcode
-
The UsPostNet class provides access to parameters that are available
for the UsPostNet decoder.
- ScannerConfig.DecoderParams.WebCode - Class in com.symbol.emdk.barcode
-
The WebCode class provides access to parameters that are available
for the WebCode decoder.
- ScannerConfig.GS1LimitedSecurityLevel - Enum in com.symbol.emdk.barcode
-
Security level addition of GS1 DataBar lim decoder.
- ScannerConfig.HanXinInverse - Enum in com.symbol.emdk.barcode
-
This parameter allows the user to select decoding on inverse HanXin barcodes.
- ScannerConfig.IlluminationMode - Enum in com.symbol.emdk.barcode
-
Enable/disable illumination depending on ambient light conditions.
- ScannerConfig.Inverse1DMode - Enum in com.symbol.emdk.barcode
-
This parameter allows the user to select decoding on inverse 1D barcodes.
- ScannerConfig.Isbt128ContactMode - Enum in com.symbol.emdk.barcode
-
Option for concatenating pairs of ISBT128 code types.
- ScannerConfig.LcdMode - Enum in com.symbol.emdk.barcode
-
Enable or disable LCD mode (for Blockbuster imager devices only).
- ScannerConfig.LinearSecurityLevel - Enum in com.symbol.emdk.barcode
-
Sets the number of times a barcode is read to confirm an accurate
decode.
- ScannerConfig.MultiBarcodeParams - Class in com.symbol.emdk.barcode
-
The MultiBarcodeParams class provides access to multi-barcode
parameters that are available to configure.
- ScannerConfig.OneDQuietZoneLevel - Enum in com.symbol.emdk.barcode
-
Describes the effort at which the decoder will attempt to decode margin-less barcodes.
- ScannerConfig.PairAfterScannerReboot - Enum in com.symbol.emdk.barcode
-
Enable/disable automatic reconnection after scanner reboot.
- ScannerConfig.PickList - Enum in com.symbol.emdk.barcode
-
- ScannerConfig.PicklistEx - Enum in com.symbol.emdk.barcode
-
Allows the imager or camera to decode only the barcode that is directly under the
cross-hair (+)/center of the reticle part of the pattern.
- ScannerConfig.PoorQualityDecodeEffortLevel - Enum in com.symbol.emdk.barcode
-
Describes the selection of enhancement modes for decoding barcodes of poor or degraded quality.
- ScannerConfig.PowerMode - Enum in com.symbol.emdk.barcode
-
Set laser scanner power mode
- ScannerConfig.Preamble - Enum in com.symbol.emdk.barcode
-
Controls the preamble applied to the barcode Preamble characters are
part of the UPC symbol consisting of Country Code and System Character.
- ScannerConfig.ReaderParams - Class in com.symbol.emdk.barcode
-
The ReaderParams class holds the parameters for a
scanner.
- ScannerConfig.ReaderParams.ReaderSpecific - Class in com.symbol.emdk.barcode
-
ReaderSpecific class provides access to the reader specific parameters.
- ScannerConfig.ReaderParams.ReaderSpecific.CameraSpecific - Class in com.symbol.emdk.barcode
-
CameraSpecific class provides access to the camera scanner specific parameters.
- ScannerConfig.ReaderParams.ReaderSpecific.ContinuousRead - Class in com.symbol.emdk.barcode
-
- ScannerConfig.ReaderParams.ReaderSpecific.ImagerSpecific - Class in com.symbol.emdk.barcode
-
ImagerSpecific provides access to the imager specific parameters.
- ScannerConfig.ReaderParams.ReaderSpecific.LaserSpecific - Class in com.symbol.emdk.barcode
-
LaserSpecific class provides access to the laser scanner specific parameters.
- ScannerConfig.ScanMode - Enum in com.symbol.emdk.barcode
-
Available scanning modes.
- ScannerConfig.ScanParams - Class in com.symbol.emdk.barcode
-
The ScanParams class provides access to scanning
parameters that are available for all decoders.
- ScannerConfig.SecurityLevel - Enum in com.symbol.emdk.barcode
-
The scanner offers four levels of decode security for UPC/EAN barcodes.
- ScannerConfig.SkipOnUnSupported - Enum in com.symbol.emdk.barcode
-
Describes what to do when the scanner config fields are not supported for the specified scanner.
- ScannerConfig.SupplementalMode - Enum in com.symbol.emdk.barcode
-
Supplemental modes
- ScannerConfig.UccLinkMode - Enum in com.symbol.emdk.barcode
-
Describes the UCC link mode state.
- ScannerConfig.UdiParams - Class in com.symbol.emdk.barcode
-
The UdiParams class provides access to UDI
parameters that are available to configure.
- ScannerConfig.VerifyCheckDigit - Enum in com.symbol.emdk.barcode
-
Check the integrity of all Code 11 symbols to verify that the data
complies with the specified check digit algorithm.
- ScannerConfig.ViewFinderMode - Enum in com.symbol.emdk.barcode
-
Configures the Viewfinder modes supported for camera scanning.
- ScannerException - Exception in com.symbol.emdk.barcode
-
The methods of barcode scanning object throw a ScannerException when an error
occurs.
- ScannerInfo - Class in com.symbol.emdk.barcode
-
ScannerInfo provides information of the scanner device.
- ScannerInfo.ConnectionType - Enum in com.symbol.emdk.barcode
-
List of supported scanner connection types.
- ScannerInfo.DecoderType - Enum in com.symbol.emdk.barcode
-
This lists all the barcode types supported by scanners
- ScannerInfo.DeviceType - Enum in com.symbol.emdk.barcode
-
List of supported scanner device types.
- ScannerResults - Enum in com.symbol.emdk.barcode
-
Defines all the error codes the barcode scanning API returns.
- scannerSelection - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode
-
Deprecated.
- scanParams - Variable in class com.symbol.emdk.barcode.ScannerConfig
-
The ScanParams property provides access to scanning parameters that are
available for all decoders.
- scanParams - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode
-
Deprecated.
- scanTimeout - Variable in class com.symbol.emdk.scanandpair.ScanAndPairConfig.ScanInfo
-
Scan timeout in milliseconds.
- SecureNfcException - Exception in com.symbol.emdk.securenfc
-
The methods of SecureNfcException object throw a SecureNfcException when an error
occurs.
- SecureNfcManager - Class in com.symbol.emdk.securenfc
-
- SecureNfcManager.SamType - Enum in com.symbol.emdk.securenfc
-
Deprecated.
Supported SAM types.
- SecureNfcManager.TagTechType - Enum in com.symbol.emdk.securenfc
-
Deprecated.
NFC tag types.
- SecureNfcResults - Enum in com.symbol.emdk.securenfc
-
- security_level - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.DecoderParams.Code128
-
Deprecated.
The scanner of fers four levels of decode security for Code 128 bar codes.
- security_level - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.DecoderParams.Code39
-
Deprecated.
Options: Security level 0 , Security Level 1 , Security Level 2 and Security Level 3 (default - Security level 1).
- security_level - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.DecoderParams.Interleaved_2of5
-
Deprecated.
- security_level - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.UpcEanParams
-
Deprecated.
The scanner of fers four levels of decode security for UPC/EAN bar codes.
- securityLevel - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams.Code128
-
The scanner of fers four levels of decode security for Code 128
barcodes.
- securityLevel - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams.Code39
-
Options: Security level 0 , Security Level 1 , Security Level 2
and Security Level 3.
- securityLevel - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams.Gs1DatabarLim
-
Sets the four levels of decode security for GS1 DataBar Limited barcodes.
- securityLevel - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams.I2of5
-
- securityLevel - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams.UpcEanParams
-
The scanner of fers four levels of decode security for UPC/EAN
barcodes.
- selectApplication(int) - Method in class com.symbol.emdk.securenfc.MifareDesfire
-
Selects specified card application.On Tag lost connection needs to
re-established by calling enable API in the application.This is a
synchronous call.
- SERIAL_NUMBER - Static variable in class com.symbol.emdk.barcode.TokenizedData.Keys
-
- SerialComm - Class in com.symbol.emdk.serialcomm
-
This is the primary object to access the serial communication feature to communicate with remote device wither via USB/Serial.
- SerialComm.ControlSignal - Enum in com.symbol.emdk.serialcomm
-
List of control signals
- SerialCommConfig - Class in com.symbol.emdk.serialcomm
-
The SerialCommConfig class provides access to configure the serial port settings.
- SerialCommConfig.BaudRates - Class in com.symbol.emdk.serialcomm
-
Possible baud rate constants defined.
- SerialCommConfig.DataBits - Enum in com.symbol.emdk.serialcomm
-
Pre-defined constants for number of data bits in a serial frame in SerialComm object.
- SerialCommConfig.FlowControlMode - Enum in com.symbol.emdk.serialcomm
-
Pre-defined constants to specify flow control.
- SerialCommConfig.ParityBits - Enum in com.symbol.emdk.serialcomm
-
Specifies the parity bits for a SerialComm object.
- SerialCommConfig.StopBits - Enum in com.symbol.emdk.serialcomm
-
Specifies the number of stop bits used on the SerialComm object.
- SerialCommException - Exception in com.symbol.emdk.serialcomm
-
The methods of serial communication object throw a SerialCommException when an error
occurs.
- SerialCommManager - Class in com.symbol.emdk.serialcomm
-
This is the primary object to access the serial communication feature to communicate with remote device wither via USB/Serial.
- SerialCommResults - Enum in com.symbol.emdk.serialcomm
-
Serial Communication error codes and its details.
- SerialPortInfo - Class in com.symbol.emdk.serialcomm
-
Provides information about the serial port used for communication.
- setConfig(ScannerConfig) - Method in class com.symbol.emdk.barcode.Scanner
-
Changes the settings for this scanner device.
- setConfig(SerialCommConfig) - Method in class com.symbol.emdk.serialcomm.SerialComm
-
Sets the serial comm settings for the currently choosen port.
- setConfig(SimulScanConfig) - Method in class com.symbol.emdk.simulscan.SimulScanReader
-
Changes the settings for this reader device.
- setFastChargingState(boolean) - Method in class com.symbol.emdk.personalshopper.CradleConfig
-
Sets fast charging state of cradle.
- setInterfaceConfig(InterfaceConfig) - Method in class com.symbol.emdk.barcode.Scanner
-
- setLocation(CradleConfig.CradleLocation) - Method in class com.symbol.emdk.personalshopper.CradleConfig
-
Sets the cradle location.
- setSignalState(SerialComm.ControlSignal, boolean) - Method in class com.symbol.emdk.serialcomm.SerialComm
-
This method allows the application to set the status of control signal.
- setValue(int, String) - Method in enum com.symbol.emdk.securenfc.SecureNfcResults
-
- signature - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams
-
The Signature class provides access to parameters that are available
for the Signature decoder.
- signature - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.Decoders
-
Deprecated.
Sets the Enabled State of Decoder Signature.
- SimulScanConfig - Class in com.symbol.emdk.simulscan
-
The SimulScanConfig class provides access to reader configuration settings.
- SimulScanConfig(SvcSimulScanConfig) - Constructor for class com.symbol.emdk.simulscan.SimulScanConfig
-
- SimulScanData - Class in com.symbol.emdk.simulscan
-
The SimulScanData object gives scanning result
- SimulScanData() - Constructor for class com.symbol.emdk.simulscan.SimulScanData
-
- SimulScanElement - Class in com.symbol.emdk.simulscan
-
The SimulScanElement abstract class represents a processed SimulScanTemplateElement.
- SimulScanElement() - Constructor for class com.symbol.emdk.simulscan.SimulScanElement
-
- SimulScanElement(String, Object, int) - Constructor for class com.symbol.emdk.simulscan.SimulScanElement
-
- SimulScanException - Exception in com.symbol.emdk.simulscan
-
The SimulScan APIs throw a SimulScanException when an error occurs.
- SimulScanException(SimulScanResults) - Constructor for exception com.symbol.emdk.simulscan.SimulScanException
-
- SimulScanException(SimulScanResults, String) - Constructor for exception com.symbol.emdk.simulscan.SimulScanException
-
- SimulScanGroup - Class in com.symbol.emdk.simulscan
-
The SimulScanGroup class represents a processed SimulScanTemplateGroup.
- SimulScanGroup() - Constructor for class com.symbol.emdk.simulscan.SimulScanGroup
-
- SimulScanGroup(String, Object, int) - Constructor for class com.symbol.emdk.simulscan.SimulScanGroup
-
- SimulScanManager - Class in com.symbol.emdk.simulscan
-
This is the primary object to access the SimulScan feature.
- SimulScanManager(Context, EMDKServiceConnection) - Constructor for class com.symbol.emdk.simulscan.SimulScanManager
-
- SimulScanManager.DeviceIdentifier - Enum in com.symbol.emdk.simulscan
-
Defines scanner device identifier.
- SimulScanMultiTemplate - Class in com.symbol.emdk.simulscan
-
The SimulScanMultiTemplate class contains an entire parsed XML template file.
- SimulScanMultiTemplate(SvcSimulScanMultiTemplate) - Constructor for class com.symbol.emdk.simulscan.SimulScanMultiTemplate
-
- SimulScanMultiTemplate(SimulScanManager, String) - Constructor for class com.symbol.emdk.simulscan.SimulScanMultiTemplate
-
Create SimulScanMultiTemplate object from XML string
- SimulScanMultiTemplate(SimulScanManager, Uri) - Constructor for class com.symbol.emdk.simulscan.SimulScanMultiTemplate
-
Create SimulScanMultiTemplate object from URI to template XML
- SimulScanReader - Class in com.symbol.emdk.simulscan
-
SimulScanReader class will represent and provides access to the physical Reader
device.
- SimulScanReader(SimulScanReaderInfo, Context, EMDKServiceConnection) - Constructor for class com.symbol.emdk.simulscan.SimulScanReader
-
- SimulScanReader.DataListerner - Interface in com.symbol.emdk.simulscan
-
An interface for notifying client applications when the scan data is
available.
- SimulScanReader.StatusListerner - Interface in com.symbol.emdk.simulscan
-
An interface for notifying client applications to notify scan events.
- SimulScanReaderInfo - Class in com.symbol.emdk.simulscan
-
SimulScanReaderInfo provides information of the reader device.
- SimulScanReaderInfo(com.symbol.emdk.emdkservice.simulscan.SvcSimulScanDeviceInfo) - Constructor for class com.symbol.emdk.simulscan.SimulScanReaderInfo
-
- SimulScanReaderInfo.DeviceType - Enum in com.symbol.emdk.simulscan
-
List of supported scanner device type.
- SimulScanRegion - Class in com.symbol.emdk.simulscan
-
The SimulScanRegion class represents a processed SimulScanTemplateRegion.
- SimulScanRegion() - Constructor for class com.symbol.emdk.simulscan.SimulScanRegion
-
- SimulScanRegion(String, YuvImage, Object, int, RegionType, int, int) - Constructor for class com.symbol.emdk.simulscan.SimulScanRegion
-
- SimulScanResults - Enum in com.symbol.emdk.simulscan
-
Defines all the error codes the SimulScan API returns.
- SimulScanStatusData - Class in com.symbol.emdk.simulscan
-
SimulScanStatusData class provides access to reader status.
- SimulScanStatusData() - Constructor for class com.symbol.emdk.simulscan.SimulScanStatusData
-
- SimulScanStatusData.ExtendedStatus - Enum in com.symbol.emdk.simulscan
-
- SimulScanStatusData.SimulScanStatus - Enum in com.symbol.emdk.simulscan
-
- SimulScanTemplate - Class in com.symbol.emdk.simulscan
-
The Template class represents the XML template passed into the SimulScanEngine.
- SimulScanTemplate() - Constructor for class com.symbol.emdk.simulscan.SimulScanTemplate
-
- SimulScanTemplateElement - Class in com.symbol.emdk.simulscan
-
The TemplateElement class represents elements nested directly under the tag in
an XML template file
- SimulScanTemplateElement() - Constructor for class com.symbol.emdk.simulscan.SimulScanTemplateElement
-
- SimulScanTemplateElement(int, String) - Constructor for class com.symbol.emdk.simulscan.SimulScanTemplateElement
-
- SimulScanTemplateGroup - Class in com.symbol.emdk.simulscan
-
The SimulScanTemplateGroup class is a grouping of multiple SimulScanTemplateRegion items.
- SimulScanTemplateGroup() - Constructor for class com.symbol.emdk.simulscan.SimulScanTemplateGroup
-
- SimulScanTemplateGroup(int, String) - Constructor for class com.symbol.emdk.simulscan.SimulScanTemplateGroup
-
- SimulScanTemplateRegion - Class in com.symbol.emdk.simulscan
-
The SimulScanTemplateRegion class represents a particular region in a Template.
- SimulScanTemplateRegion() - Constructor for class com.symbol.emdk.simulscan.SimulScanTemplateRegion
-
- SimulScanTemplateRegion(int, String) - Constructor for class com.symbol.emdk.simulscan.SimulScanTemplateRegion
-
- skipOnUnsupported - Variable in class com.symbol.emdk.barcode.ScannerConfig
-
This flag to tells whether to skip the unsupported parameter/values and continue or stop setting the configuration.
- smoothEffect - Variable in class com.symbol.emdk.personalshopper.CradleLedFlashInfo
-
Enable or disable the smooth effect of the LED blinking
- softwareInfo - Variable in class com.symbol.emdk.securenfc.MifareDesfire.CardVersionInfo
-
Software information
- softwareInfo - Variable in class com.symbol.emdk.securenfc.MifareSam.SamInfo
-
Software information
- ssdcStatus - Variable in class com.symbol.emdk.simulscan.SimulScanStatusData
-
- statusCode - Variable in class com.symbol.emdk.EMDKResults
-
- StatusData - Class in com.symbol.emdk.barcode
-
StatusData class provides access to scanner status.
- StatusData - Class in com.symbol.emdk.scanandpair
-
This class provides the Status detail of ScanAndPair.
- StatusData() - Constructor for class com.symbol.emdk.scanandpair.StatusData
-
- StatusData.ScanAndPairStates - Enum in com.symbol.emdk.scanandpair
-
Defines the different states of the scan and pir/unpair.
- StatusData.ScannerStates - Enum in com.symbol.emdk.barcode
-
Defines the different states of the barcode scanner.
- statusDescription - Variable in class com.symbol.emdk.simulscan.SimulScanStatusData
-
- stopBit - Variable in class com.symbol.emdk.serialcomm.SerialCommConfig
-
Specifies the number of stop bits to be used.
- storageSize - Variable in class com.symbol.emdk.securenfc.MifareDesfire.CardVersionInfo.HardwareInfo
-
IC Memory information
- storageSize - Variable in class com.symbol.emdk.securenfc.MifareDesfire.CardVersionInfo.SoftwareInfo
-
IC Memory information
- storageSize - Variable in class com.symbol.emdk.securenfc.MifareSam.SamInfo.HardwareInfo
-
IC Memory information
- storageSize - Variable in class com.symbol.emdk.securenfc.MifareSam.SamInfo.SoftwareInfo
-
IC Memory information
- subType - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams.WebCode
-
Webcode sub type enabled
- supplemental2 - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams.UpcEanParams
-
Flag to enable length 2 supplementals.
- supplemental2 - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.UpcEanParams
-
Deprecated.
Flag to enable length 2 supplementals.
- supplemental5 - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams.UpcEanParams
-
Flag to enable length 5 supplementals.
- supplemental5 - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.UpcEanParams
-
Deprecated.
Flag to enable length 5 supplementals.
- supplemental_mode - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.UpcEanParams
-
Deprecated.
The supplemental mode.
- supplementalMode - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams.UpcEanParams
-
The supplemental mode.
- supplementalRetries - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams.UpcEanParams
-
Retry count for auto-discriminating for supplementals.