com.symbol.emdk.barcode

Class ScannerConfig

java.lang.Object

com.symbol.emdk.barcode.ScannerConfig

public class ScannerConfig
extends Object

The ScannerConfig class provides access to scanner configuration settings.

 Example Usage:
 	ScannerConfig scannerConfig = scanner.getConfig(scannerConfig);  
  scannerConfig.scanParams.decodeHapticFeedback = true;
  scannerConfig.decoderParams.codabar.length1 = 6;
  scanner.setConfig(scannerConfig);
 
 

Nested Class Summary

Nested Classes

Modifier and Type	Class and Description
static class	ScannerConfig.AdaptiveScanning Enable or Disable Adaptive scanning.
static class	ScannerConfig.AimingPattern Describes the aiming pattern to be turned ON/OFF.
static class	ScannerConfig.AimType Describes the type of aiming to use.
static class	ScannerConfig.AudioStreamType Volume slider type for decode audio feedback.
static class	ScannerConfig.BeamWidth Controls the beam width of a laser scanner.
static class	ScannerConfig.BooklandFormat Lists the Bookland formats
static class	ScannerConfig.CheckDigit The number of check digits to be verified.
static class	ScannerConfig.CheckDigitScheme Two algorithms are possible for the verification of the second MSI check digit.
static class	ScannerConfig.CheckDigitType Verify data integrity.
static class	ScannerConfig.CodeIdType A Code ID character identifies the code type of a scanned barcode.
static class	ScannerConfig.CouponReport Supported Coupon modes
static class	ScannerConfig.DecodeAudioFeedbackMode Describes the Audio Feedback Mode is given by the host device and remote scanner.
static class	ScannerConfig.DecodeLEDFeedbackMode Describes the LED Feedback mode is given by the host device and remote scanner.
class	ScannerConfig.DecoderParams The DecoderParams class contains decoder parameters that are used by multiple decoder symbologies.
static class	ScannerConfig.GS1LimitedSecurityLevel Security level addition of GS1 DataBar lim decoder.
static class	ScannerConfig.HanXinInverse This parameter allows the user to select decoding on inverse HanXin barcodes.
static class	ScannerConfig.IlluminationMode Enable/disable illumination depending on ambient light conditions.
static class	ScannerConfig.Inverse1DMode This parameter allows the user to select decoding on inverse 1D barcodes.
static class	ScannerConfig.Isbt128ContactMode Option for concatenating pairs of ISBT128 code types.
static class	ScannerConfig.LcdMode Enable or disable LCD mode (for Blockbuster imager devices only).
static class	ScannerConfig.LinearSecurityLevel Sets the number of times a barcode is read to confirm an accurate decode.
class	ScannerConfig.OcrParams The OcrParams class provides access to OCR parameters that are available to configure.
static class	ScannerConfig.OneDQuietZoneLevel Describes the effort at which the decoder will attempt to decode margin-less barcodes.
static class	ScannerConfig.PairAfterScannerReboot Enable/disable automatic reconnection after scanner reboot.
static class	ScannerConfig.PickList Deprecated. This enum is deprecated and the recommendation is to use new enum ScannerConfig.PicklistEx. Allows the imager to decode only the barcode that is directly under the cross-hair/reticle (+) part of the pattern. This feature is useful in applications where multiple barcodes may appear in the field of view during a decode session and only one of them is targeted for decode. Note: Selecting the picklist may adversely affect overall decoding performance. Example Usage: PickList.DISABLED;
static class	ScannerConfig.PicklistEx Allows the imager or camera to decode only the barcode that is directly under the cross-hair (+)/center of the reticle part of the pattern.
static class	ScannerConfig.PoorQualityDecodeEffortLevel Describes the selection of enhancement modes for decoding barcodes of poor or degraded quality.
static class	ScannerConfig.PowerMode Set laser scanner power mode
static class	ScannerConfig.Preamble Controls the preamble applied to the barcode Preamble characters are part of the UPC symbol consisting of Country Code and System Character.
class	ScannerConfig.ReaderParams The ReaderParams class holds the parameters for a scanner.
static class	ScannerConfig.ScanMode Available scanning modes.
class	ScannerConfig.ScanParams The ScanParams class provides access to scanning parameters that are available for all decoders.
static class	ScannerConfig.SecurityLevel The scanner offers four levels of decode security for UPC/EAN barcodes.
static class	ScannerConfig.SkipOnUnSupported Describes what to do when the scanner config fields are not supported for the specified scanner.
static class	ScannerConfig.SupplementalMode Supplemental modes
static class	ScannerConfig.UccLinkMode Describes the UCC link mode state.
class	ScannerConfig.UdiParams The UdiParams class provides access to UDI parameters that are available to configure.
static class	ScannerConfig.VerifyCheckDigit Check the integrity of all Code 11 symbols to verify that the data complies with the specified check digit algorithm.
static class	ScannerConfig.ViewFinderMode Configures the Viewfinder modes supported for camera scanning.

Field Summary

Fields

Modifier and Type	Field and Description
ScannerConfig.DecoderParams	decoderParams The DecoderParams class contains decoder parameters that are used by multiple decoder symbologies.
ScannerConfig.ReaderParams	readerParams The ReaderParams class holds the parameters for a scanner.
ScannerConfig.ScanParams	scanParams The ScanParams property provides access to scanning parameters that are available for all decoders.
ScannerConfig.SkipOnUnSupported	skipOnUnsupported This flag to tells whether to skip the unsupported parameter/values and continue or stop setting the configuration.
ScannerConfig.UdiParams	udiParams The UdiParams class holds the parameters for UDI.

Method Summary

Methods

Modifier and Type	Method and Description
boolean	isParamSupported(String param) This method helps to check scanner config parameters supported Returns true if specified parameter is supported.
void	resetToDefault(Scanner scanner) Resets the scanner parameters to defaults values for the specified scanner.

Methods inherited from class java.lang.Object

clone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

Field Detail

skipOnUnsupported

public ScannerConfig.SkipOnUnSupported skipOnUnsupported

This flag to tells whether to skip the unsupported parameter/values and continue or stop setting the configuration. Its set to UNSUPPORTED_PARAM by default which skips the unsupported params and continues.

scanParams

public ScannerConfig.ScanParams scanParams

The ScanParams property provides access to scanning parameters that are available for all decoders. NOTE: When calling enable() after disable(), all the latest configuration parameter values (Config.DecoderParams, Config.ScannerParams, Config.ReaderParamss) will be set automatically.

decoderParams

public ScannerConfig.DecoderParams decoderParams

The DecoderParams class contains decoder parameters that are used by multiple decoder symbologies. The property provides access to such decoder parameters as Enabled and isSupported, among others. NOTE: When calling enable() after disable(), all the latest configuration parameter values (Config.DecoderParams, Config.ScannerParams, Config.ReaderParams) will be set automatically.

readerParams

public ScannerConfig.ReaderParams readerParams

The ReaderParams class holds the parameters for a scanner. Reader parameters are global to all reads on all open handles on the same scanner. NOTE: When calling enable() after disable(), all the latest configuration parameter values (Config.DecoderParams, Config.ScannerParams, Config.ReaderParams) will be set automatically.

udiParams

public ScannerConfig.UdiParams udiParams

The UdiParams class holds the parameters for UDI.

Method Detail

isParamSupported

public boolean isParamSupported(String param)

This method helps to check scanner config parameters supported Returns true if specified parameter is supported. The field name should be specify complete access path till the field in the string format. The scanner config object name can be any name, but following field names should exactly match the fields defined by scanner config class.

 Example Usage:
  ScannerConfig config1 = scanner.getConfig(scannerConfig);
  if ( config1.isParamSupported("config1.scanParams.decodeHapticFeedback") ) {
  	config1.scanParams.decodeHapticFeedback = true;
  }
  if ( config1.isParamSupported("config1.decoderParams.codabar.enabled") ) {
  	config1.decoderParams.codabar.enabled = true;
  } 
  scanner.setConfig(config1);
 
 

Parameters:

param -

Returns:

resetToDefault

public void resetToDefault(Scanner scanner)
                    throws ScannerException

Resets the scanner parameters to defaults values for the specified scanner. The unsupported parameters left as it is.

Parameters:

scanner -

Throws:

ScannerException