C-Index

A B C D E F G H I J K L M N O P Q R S T U V W Z

C

cameraSpecific - Variable in class com.symbol.emdk.barcode.ScannerConfig.ReaderParams.ReaderSpecific: Provide access to set the camera specific settings if the scanner device is camera.
canadian_postal - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.Decoders: Deprecated.

Sets the Enabled State of Decoder Canadian Postal.
canadianPostal - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams: The CanadianPostal class provides access to parameters that are available for the CanadianPostal decoder.
cancelNotification() - Method in class com.symbol.emdk.notification.NotificationDevice: This cancels the active notification from the device.
cancelRead() - Method in class com.symbol.emdk.barcode.Scanner: This Cancels any pending asynchronous read() calls.
cancelRead() - Method in class com.symbol.emdk.simulscan.SimulScanReader: Deprecated.

This cancels any pending read() calls
category - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.DataDelivery.Intent: Deprecated.

Gets and Sets the intent category.
characterSetSelection - Variable in class com.symbol.emdk.barcode.ScannerConfig.ReaderParams.ReaderSpecific.CameraSpecific: Sets the character set to be used to decode the returned barcode data.
characterSetSelection - Variable in class com.symbol.emdk.barcode.ScannerConfig.ReaderParams.ReaderSpecific.ImagerSpecific: Sets the character set to be used to decode the returned barcode data.
characterSetSelection - Variable in class com.symbol.emdk.barcode.ScannerConfig.ReaderParams.ReaderSpecific.LaserSpecific: Sets the character set to be used to decode the returned barcode data.
check_digit - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.DecoderParams.Interleaved_2of5: Deprecated.

The check digit type to verify.
check_digit - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.DecoderParams.MSI: Deprecated.

With MSI symbols, one check digit is mandatory and always verified by the reader.
check_digit_scheme - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.DecoderParams.MSI: Deprecated.

Two algorithms are possible for the verification of the second MSI check digit.
check_isbt_table - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.DecoderParams.Code128: Deprecated.

The ISBT specification includes a table that lists several types of ISBT bar codes that are commonly used in pairs.
checkDigitModulus - Variable in class com.symbol.emdk.barcode.ScannerConfig.OcrParams: Set the check digit modulus value for OCR Check Digit Calculation
checkDigitMultiplier - Variable in class com.symbol.emdk.barcode.ScannerConfig.OcrParams: Set OCR check digit multipliers for the character positions
checkDigits - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams.Msi: With MSI symbols, one check digit is mandatory and always verified by the reader.
checkDigitScheme - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams.Msi: Two algorithms are possible for the verification of the second MSI check digit.
checkDigitValidation - Variable in class com.symbol.emdk.barcode.ScannerConfig.OcrParams: Select check digit validation Scheme
checkIsbtTable - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams.Code128: The ISBT specification includes a table that lists several types of ISBT barcodes that are commonly used in pairs.
chinese2of5 - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams: The Chinese_2of5 class provides access to parameters that are available for the Chinese2of5 decoder.
chinese_2of5 - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.Decoders: Deprecated.

Sets the Enabled State of Decoder Chinese 2 of 5.
clsi_editing - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.DecoderParams.Codabar: Deprecated.

Enable this parameter to strip the start and stop characters and insert a space after the first, fifth, and tenth characters of a 14-character Codabar symbol.
clsiEditing - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams.CodaBar: Enable this parameter to strip the start and stop characters and insert a space after the first, fifth, and tenth characters of a 14-character Codabar symbol.
codaBar - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams: The CodaBar class provides access to parameters that are available for the CodaBar decoder.
codabar - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.DecoderParams: Deprecated.

Configures the Codabar Symbology object ProfileConfig.DataCapture.Barcode.DecoderParams.Codabar.
codabar - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.Decoders: Deprecated.

Sets the Enabled State of Decoder Codabar.
code11 - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams: The Code11 class provides access to parameters that are available for the Code11 decoder.
code11 - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.DecoderParams: Deprecated.

Configures the Code11 Symbology object ProfileConfig.DataCapture.Barcode.DecoderParams.Code11.
code11 - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.Decoders: Deprecated.

Sets the Enabled State of Decoder Code11.
code128 - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams: The Code128 class provides access to parameters that are available for the Code128 decoder.
code128 - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.DecoderParams: Deprecated.

Configures the Code128 Symbology object ProfileConfig.DataCapture.Barcode.DecoderParams.Code128.
code128 - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.Decoders: Deprecated.

Sets the Enabled State of Decoder Code 128.
code39 - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams: The Code39 class provides access to parameters that are available for the Code39 decoder.
code39 - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.DecoderParams: Deprecated.

Configures the Code39 Symbology object ProfileConfig.DataCapture.Barcode.DecoderParams.Code39.
code39 - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.Decoders: Deprecated.

Sets the Enabled State of Decoder Code 39.
code93 - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams: The Code93 class provides access to parameters that are available for the Code93 decoder.
code93 - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.DecoderParams: Deprecated.

Configures the Code93 Symbology object ProfileConfig.DataCapture.Barcode.DecoderParams.Code93.
code93 - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.Decoders: Deprecated.

Sets the Enabled State of Decoder Code 93.
code_id_type - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.ScanParams: Deprecated.

A Code ID character identifies the code type of a scanned bar code.
codeIdType - Variable in class com.symbol.emdk.barcode.ScannerConfig.ScanParams: A Code ID character identifies the code type of a scanned barcode.
color - Variable in class com.symbol.emdk.notification.Notification.LEDParams: The color for blinking LED on the notification device using RGB format.
column - Variable in class com.symbol.emdk.personalshopper.CradleConfig.CradleLocation: The column identification number.
com.symbol.emdk - package com.symbol.emdk
com.symbol.emdk.barcode - package com.symbol.emdk.barcode
com.symbol.emdk.notification - package com.symbol.emdk.notification
com.symbol.emdk.personalshopper - package com.symbol.emdk.personalshopper
com.symbol.emdk.sam - package com.symbol.emdk.sam
com.symbol.emdk.scanandpair - package com.symbol.emdk.scanandpair
com.symbol.emdk.serialcomm - package com.symbol.emdk.serialcomm
com.symbol.emdk.simulscan - package com.symbol.emdk.simulscan
composite_AB - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.DecoderParams: Deprecated.

Configures the Composite AB Symbology object ProfileConfig.DataCapture.Barcode.DecoderParams.Composite_AB.
composite_ab - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.Decoders: Deprecated.

Sets the Enabled State of Decoder Composite AB.
composite_c - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.Decoders: Deprecated.

Sets the Enabled State of Decoder Composite C.
compositeAB - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams: The Composite_AB class provides access to parameters that are available for the CompositeAB decoder.
compositeC - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams: The Composite_C class provides access to parameters that are available for the CompositeC decoder.
config - Variable in class com.symbol.emdk.personalshopper.Cradle: The field to access Cradle configuration.
config - Variable in class com.symbol.emdk.scanandpair.ScanAndPairManager: The ScanAndPairManager.config provides a way to configure the settings to use it in scanAndPair() or scanAnUnpair() methods.
connect() - Method in class com.symbol.emdk.sam.SAM: Connects to the SAM.
connection_idle_time - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.ScanParams: Deprecated.

If a bluetooth scanner associated application is opened, Bluetooth scanner will be automatically disconnected after this Connection Idle Time duration from inactivity
connectionEstablishTime - Variable in class com.symbol.emdk.barcode.InterfaceConfig: Timeout in seconds that Scanner.enable() will block before returning if an external scanner connection is not established.
connectionIdleTime - Variable in class com.symbol.emdk.barcode.ScannerConfig.ReaderParams.ReaderSpecific.ImagerSpecific: This is the time (in seconds) when an external scanner is idle in a particular state (ScannerStates.IDLE to ScannerStates.WAITING) after which the connection between the terminal and the scanner is severed to conserve power.
connectionIdleTime - Variable in class com.symbol.emdk.barcode.ScannerConfig.ReaderParams.ReaderSpecific.LaserSpecific: This is the time (in seconds) when an external scanner is idle in a particular state (ScannerStates.IDLE to ScannerStates.WAITING) after which the connection between the terminal and the scanner is severed to conserve power.
ConnectionType - Enum in com.symbol.emdk.notification
Constants - Class in com.symbol.emdk
Constants() - Constructor for class com.symbol.emdk.Constants
continuousRead - Variable in class com.symbol.emdk.barcode.ScannerConfig.ReaderParams.ReaderSpecific.CameraSpecific: Deprecated.
We recommend using the new fields ScannerConfig.ReaderParams.ReaderSpecific.CameraSpecific.aimType, ScannerConfig.ReaderParams.ReaderSpecific.CameraSpecific.sameSymbolTimeout, ScannerConfig.ReaderParams.ReaderSpecific.CameraSpecific.differentSymbolTimeout in your new applications.
ContinuousRead class provides access to continuous scanning related parameters.
ContinuousRead() - Constructor for class com.symbol.emdk.barcode.ScannerConfig.ReaderParams.ReaderSpecific.ContinuousRead: Deprecated.
continuousRead - Variable in class com.symbol.emdk.barcode.ScannerConfig.ReaderParams.ReaderSpecific.ImagerSpecific: Deprecated.
We recommend using the new fields ScannerConfig.ReaderParams.ReaderSpecific.ImagerSpecific.aimType, ScannerConfig.ReaderParams.ReaderSpecific.ImagerSpecific.sameSymbolTimeout, ScannerConfig.ReaderParams.ReaderSpecific.ImagerSpecific.differentSymbolTimeout in your new applications.
ContinuousRead class provides access to continuous scanning related parameters.
continuousRead - Variable in class com.symbol.emdk.barcode.ScannerConfig.ReaderParams.ReaderSpecific.LaserSpecific: Deprecated.
We recommend using the new fields ScannerConfig.ReaderParams.ReaderSpecific.LaserSpecific.aimType, ScannerConfig.ReaderParams.ReaderSpecific.LaserSpecific.sameSymbolTimeout, ScannerConfig.ReaderParams.ReaderSpecific.LaserSpecific.differentSymbolTimeout in your new applications.
ContinuousRead class provides access to continuous scanning related parameters.
convert_itf14_to_ean13 - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.DecoderParams.Interleaved_2of5: Deprecated.

Convert 14-character Interleaved 2 of 5 bar codes to EAN-13, and transmit as EAN-13.
convert_to_code32 - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.DecoderParams.Code39: Deprecated.

Code 32 is a variant of Code 39 used by the Italian pharmaceutical industry (default - disabled).
convert_to_ean13 - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.DecoderParams.EAN8: Deprecated.

Convert EAN8 data to EAN 13.
convert_to_upca - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.DecoderParams.UPCE0: Deprecated.

Enable to convert UPCE0 (zero suppressed) decoded data to UPC-A format before transmission.
convert_to_upca - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.DecoderParams.UPCE1: Deprecated.

Enable this to convert UPCE1 decoded data to UPC-A format before transmission.
convertDataBarToUpcEan - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams.UpcEanParams: If this is set it converts DataBar barcodes to UPC/EAN format.
convertToCode32 - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams.Code39: Code 32 is a variant of Code 39 used by the Italian pharmaceutical industry.
convertToEan13 - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams.Ean8: Flag to convert EAN8 to EAN13.
convertToEan13 - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams.I2of5: Convert 14-character Interleaved 2 of 5 barcodes to EAN-13, and transmit as EAN-13.
convertToUpca - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams.Upce0: Flag to enable conversion from UPCE0 to UPCA barcode.
convertToUpca - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams.Upce1: Flag to enable conversion from UPCE1 to UPCA barcode.
coupon - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.UpcEanParams: Deprecated.

Enables Coupon code decoding.
coupon_report - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.UpcEanParams: Deprecated.

Used to differentiate between old coupon (UPC/EAN and Code128) and new GS1 DataBar Coupons.
couponCode - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams.UpcEanParams: Enables Coupon code decoding.
couponReport - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams.UpcEanParams: Used to differentiate between old coupon (UPC/EAN and Code128) and new GS1 DataBar Coupons.
Cradle - Class in com.symbol.emdk.personalshopper: Class to communicate with the MC18 and PS20 cradles.
cradle - Variable in class com.symbol.emdk.personalshopper.PersonalShopper: The field to access the cradle features.
CradleConfig - Class in com.symbol.emdk.personalshopper: The class to access cradle configuration.
CradleConfig.CradleLocation - Class in com.symbol.emdk.personalshopper: The class for provides access to the cradle location.
CradleException - Exception in com.symbol.emdk.personalshopper: The methods of cradle API throw a CradleException when an error occurs.
CradleInfo - Class in com.symbol.emdk.personalshopper: This class holds cradle information.
CradleLedFlashInfo - Class in com.symbol.emdk.personalshopper: The class to hold the LED Flash settings.
CradleLedFlashInfo(int, int, boolean) - Constructor for class com.symbol.emdk.personalshopper.CradleLedFlashInfo: Constructor to instantiate the CradleLEDConfig.
CradleLocation(int, int, int) - Constructor for class com.symbol.emdk.personalshopper.CradleConfig.CradleLocation: Constructor
CradleResults - Enum in com.symbol.emdk.personalshopper: Defines all the error codes the cradle API returns.
CreateNameValuePair(String, String, String) - Static method in class com.symbol.emdk.ProfileManager: This function creates a name value pair string according to the Name-Value pair request.

A B C D E F G H I J K L M N O P Q R S T U V W Z