Skip navigation links
A B C D E F G H I J K L M N O P Q R S T U V W X Y 

C

cameraSpecific - Variable in class com.symbol.emdk.barcode.ScannerConfig.ReaderParams.ReaderSpecific
Provide access to set the camera specific settings if the scanner device is camera.
canadian_postal - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.Decoders
Deprecated.
Sets the Enabled State of Decoder Canadian Postal.
canadianPostal - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams
The CanadianPostal class provides access to parameters that are available for the CanadianPostal decoder.
cancelNotification() - Method in class com.symbol.emdk.notification.NotificationDevice
This cancels the active notification from the device.
cancelRead() - Method in class com.symbol.emdk.barcode.Scanner
This Cancels any pending asynchronous read() calls
cancelRead() - Method in class com.symbol.emdk.simulscan.SimulScanReader
This cancels any pending read() calls
category - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.DataDelivery.Intent
Deprecated.
Gets and Sets the intent category.
changeAccessRights - Variable in class com.symbol.emdk.securenfc.MifareDesfire.FileAccessRights
Key no.
changeKeyAccessRights - Variable in class com.symbol.emdk.securenfc.MifareDesfire.MasterKeySettingsType
Access rights for changing application keys (ChangeKey command) 00: Master key authentication required 0x01-0x0D: Authentication with specified key is required 0x0E: Authentication with same key no.
characterSetSelection - Variable in class com.symbol.emdk.barcode.ScannerConfig.ReaderParams.ReaderSpecific.CameraSpecific
Sets the character set to be used to decode the returned barcode data.
characterSetSelection - Variable in class com.symbol.emdk.barcode.ScannerConfig.ReaderParams.ReaderSpecific.ImagerSpecific
Sets the character set to be used to decode the returned barcode data.
characterSetSelection - Variable in class com.symbol.emdk.barcode.ScannerConfig.ReaderParams.ReaderSpecific.LaserSpecific
Sets the character set to be used to decode the returned barcode data.
check_digit - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.DecoderParams.Interleaved_2of5
Deprecated.
The check digit type to verify.
check_digit - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.DecoderParams.MSI
Deprecated.
With MSI symbols, one check digit is mandatory and always verified by the reader.
check_digit_scheme - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.DecoderParams.MSI
Deprecated.
Two algorithms are possible for the verification of the second MSI check digit.
check_isbt_table - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.DecoderParams.Code128
Deprecated.
The ISBT specification includes a table that lists several types of ISBT bar codes that are commonly used in pairs.
checkDigits - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams.Msi
With MSI symbols, one check digit is mandatory and always verified by the reader.
checkDigitScheme - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams.Msi
Two algorithms are possible for the verification of the second MSI check digit.
checkIsbtTable - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams.Code128
The ISBT specification includes a table that lists several types of ISBT barcodes that are commonly used in pairs.
chinese2of5 - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams
The Chinese_2of5 class provides access to parameters that are available for the Chinese2of5 decoder.
chinese_2of5 - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.Decoders
Deprecated.
Sets the Enabled State of Decoder Chinese 2 of 5.
close() - Method in class com.symbol.emdk.securenfc.MifareSam
Close with the SAM to perform I/O operations.
clsi_editing - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.DecoderParams.Codabar
Deprecated.
Enable this parameter to strip the start and stop characters and insert a space after the first, fifth, and tenth characters of a 14-character Codabar symbol.
clsiEditing - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams.CodaBar
Enable this parameter to strip the start and stop characters and insert a space after the first, fifth, and tenth characters of a 14-character Codabar symbol.
codaBar - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams
The CodaBar class provides access to parameters that are available for the CodaBar decoder.
codabar - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.DecoderParams
Deprecated.
Configures the Codabar Symbology object ProfileConfig.DataCapture.Barcode.DecoderParams.Codabar.
codabar - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.Decoders
Deprecated.
Sets the Enabled State of Decoder Codabar.
code11 - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams
The Code11 class provides access to parameters that are available for the Code11 decoder.
code11 - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.DecoderParams
Deprecated.
Configures the Code11 Symbology object ProfileConfig.DataCapture.Barcode.DecoderParams.Code11.
code11 - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.Decoders
Deprecated.
Sets the Enabled State of Decoder Code11.
code128 - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams
The Code128 class provides access to parameters that are available for the Code128 decoder.
code128 - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.DecoderParams
Deprecated.
Configures the Code128 Symbology object ProfileConfig.DataCapture.Barcode.DecoderParams.Code128.
code128 - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.Decoders
Deprecated.
Sets the Enabled State of Decoder Code 128.
code39 - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams
The Code39 class provides access to parameters that are available for the Code39 decoder.
code39 - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.DecoderParams
Deprecated.
Configures the Code39 Symbology object ProfileConfig.DataCapture.Barcode.DecoderParams.Code39.
code39 - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.Decoders
Deprecated.
Sets the Enabled State of Decoder Code 39.
code93 - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams
The Code93 class provides access to parameters that are available for the Code93 decoder.
code93 - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.DecoderParams
Deprecated.
Configures the Code93 Symbology object ProfileConfig.DataCapture.Barcode.DecoderParams.Code93.
code93 - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.Decoders
Deprecated.
Sets the Enabled State of Decoder Code 93.
code_id_type - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.ScanParams
Deprecated.
A Code ID character identifies the code type of a scanned bar code.
codeIdType - Variable in class com.symbol.emdk.barcode.ScannerConfig.ScanParams
A Code ID character identifies the code type of a scanned barcode.
color - Variable in class com.symbol.emdk.notification.Notification.LEDParams
The color for blinking LED on the notification device using RGB format.
column - Variable in class com.symbol.emdk.personalshopper.CradleConfig.CradleLocation
The column identification number.
com.symbol.emdk - package com.symbol.emdk
 
com.symbol.emdk.barcode - package com.symbol.emdk.barcode
 
com.symbol.emdk.notification - package com.symbol.emdk.notification
 
com.symbol.emdk.personalshopper - package com.symbol.emdk.personalshopper
 
com.symbol.emdk.scanandpair - package com.symbol.emdk.scanandpair
 
com.symbol.emdk.securenfc - package com.symbol.emdk.securenfc
 
com.symbol.emdk.serialcomm - package com.symbol.emdk.serialcomm
 
com.symbol.emdk.simulscan - package com.symbol.emdk.simulscan
 
commitTransaction() - Method in class com.symbol.emdk.securenfc.MifareDesfire
Validates all previous write access on Backup data files, Value files, and Record files within one application.
commMode - Variable in class com.symbol.emdk.securenfc.MifareDesfire.FileSettings
File communication mode
composite_AB - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.DecoderParams
Deprecated.
Configures the Composite AB Symbology object ProfileConfig.DataCapture.Barcode.DecoderParams.Composite_AB.
composite_ab - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.Decoders
Deprecated.
Sets the Enabled State of Decoder Composite AB.
composite_c - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.Decoders
Deprecated.
Sets the Enabled State of Decoder Composite C.
compositeAB - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams
The Composite_AB class provides access to parameters that are available for the CompositeAB decoder.
compositeC - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams
The Composite_C class provides access to parameters that are available for the CompositeC decoder.
config - Variable in class com.symbol.emdk.personalshopper.Cradle
The field to access Cradle configuration.
config - Variable in class com.symbol.emdk.scanandpair.ScanAndPairManager
The ScanAndPairManager.config provides a way to configure the settings to use it in scanAndPair() or scanAnUnpair() methods.
configChangeable - Variable in class com.symbol.emdk.securenfc.MifareDesfire.MasterKeySettingsType
Configuration changeable.
connect() - Method in class com.symbol.emdk.securenfc.MifareSam
Connects to the SAM to perform I/O operations.
connection_idle_time - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.ScanParams
Deprecated.
If a bluetooth scanner associated application is opened, Bluetooth scanner will be automatically disconnected after this Connection Idle Time duration from inactivity
connectionEstablishTime - Variable in class com.symbol.emdk.barcode.InterfaceConfig
Timeout in seconds that Scanner.enable() will block before returning if an external scanner connection is not established.
connectionIdleTime - Variable in class com.symbol.emdk.barcode.ScannerConfig.ReaderParams.ReaderSpecific.ImagerSpecific
This is the time (in seconds) when an external scanner is idle in a particular state (ScannerStates.IDLE to ScannerStates.WAITING) after which the connection between the terminal and the scanner is severed to conserve power.
connectionIdleTime - Variable in class com.symbol.emdk.barcode.ScannerConfig.ReaderParams.ReaderSpecific.LaserSpecific
This is the time (in seconds) when an external scanner is idle in a particular state (ScannerStates.IDLE to ScannerStates.WAITING) after which the connection between the terminal and the scanner is severed to conserve power.
ConnectionType - Enum in com.symbol.emdk.notification
 
continuousRead - Variable in class com.symbol.emdk.barcode.ScannerConfig.ReaderParams.ReaderSpecific.CameraSpecific
Deprecated.

We recommend using the new fields ScannerConfig.ReaderParams.ReaderSpecific.CameraSpecific.aimType, ScannerConfig.ReaderParams.ReaderSpecific.CameraSpecific.sameSymbolTimeout, ScannerConfig.ReaderParams.ReaderSpecific.CameraSpecific.differentSymbolTimeout in your new applications.

ContinuousRead class provides access to continuous scanning related parameters.
ContinuousRead() - Constructor for class com.symbol.emdk.barcode.ScannerConfig.ReaderParams.ReaderSpecific.ContinuousRead
Deprecated.
 
continuousRead - Variable in class com.symbol.emdk.barcode.ScannerConfig.ReaderParams.ReaderSpecific.ImagerSpecific
Deprecated.

We recommend using the new fields ScannerConfig.ReaderParams.ReaderSpecific.ImagerSpecific.aimType, ScannerConfig.ReaderParams.ReaderSpecific.ImagerSpecific.sameSymbolTimeout, ScannerConfig.ReaderParams.ReaderSpecific.ImagerSpecific.differentSymbolTimeout in your new applications.

ContinuousRead class provides access to continuous scanning related parameters.
continuousRead - Variable in class com.symbol.emdk.barcode.ScannerConfig.ReaderParams.ReaderSpecific.LaserSpecific
Deprecated.

We recommend using the new fields ScannerConfig.ReaderParams.ReaderSpecific.LaserSpecific.aimType, ScannerConfig.ReaderParams.ReaderSpecific.LaserSpecific.sameSymbolTimeout, ScannerConfig.ReaderParams.ReaderSpecific.LaserSpecific.differentSymbolTimeout in your new applications.

ContinuousRead class provides access to continuous scanning related parameters.
convert_itf14_to_ean13 - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.DecoderParams.Interleaved_2of5
Deprecated.
Convert 14-character Interleaved 2 of 5 bar codes to EAN-13, and transmit as EAN-13.
convert_to_code32 - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.DecoderParams.Code39
Deprecated.
Code 32 is a variant of Code 39 used by the Italian pharmaceutical industry (default - disabled).
convert_to_ean13 - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.DecoderParams.EAN8
Deprecated.
Convert EAN8 data to EAN 13.
convert_to_upca - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.DecoderParams.UPCE0
Deprecated.
Enable to convert UPCE0 (zero suppressed) decoded data to UPC-A format before transmission.
convert_to_upca - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.DecoderParams.UPCE1
Deprecated.
Enable this to convert UPCE1 decoded data to UPC-A format before transmission.
convertDataBarToUpcEan - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams.UpcEanParams
If this is set it converts DataBar barcodes to UPC/EAN format.
convertToCode32 - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams.Code39
Code 32 is a variant of Code 39 used by the Italian pharmaceutical industry.
convertToEan13 - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams.Ean8
Flag to convert EAN8 to EAN13.
convertToEan13 - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams.I2of5
Convert 14-character Interleaved 2 of 5 barcodes to EAN-13, and transmit as EAN-13.
convertToUpca - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams.Upce0
Flag to enable conversion from UPCE0 to UPCA barcode.
convertToUpca - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams.Upce1
Flag to enable conversion from UPCE1 to UPCA barcode.
coupon - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.UpcEanParams
Deprecated.
Enables Coupon code decoding.
coupon_report - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.UpcEanParams
Deprecated.
Used to differentiate between old coupon (UPC/EAN and Code128) and new GS1 DataBar Coupons.
couponCode - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams.UpcEanParams
Enables Coupon code decoding.
couponReport - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams.UpcEanParams
Used to differentiate between old coupon (UPC/EAN and Code128) and new GS1 DataBar Coupons.
Cradle - Class in com.symbol.emdk.personalshopper
Class to communicate with the MC18 and PS20 cradles.
cradle - Variable in class com.symbol.emdk.personalshopper.PersonalShopper
The field to access the cradle features.
CradleConfig - Class in com.symbol.emdk.personalshopper
The class to access cradle configuration.
CradleConfig.CradleLocation - Class in com.symbol.emdk.personalshopper
The class for provides access to the cradle location.
CradleException - Exception in com.symbol.emdk.personalshopper
The methods of cradle API throw a CradleException when an error occurs.
CradleInfo - Class in com.symbol.emdk.personalshopper
This class holds cradle information.
CradleLedFlashInfo - Class in com.symbol.emdk.personalshopper
The class to hold the LED Flash settings.
CradleLedFlashInfo(int, int, boolean) - Constructor for class com.symbol.emdk.personalshopper.CradleLedFlashInfo
Constructor to instantiate the CradleLEDConfig.
CradleLocation(int, int, int) - Constructor for class com.symbol.emdk.personalshopper.CradleConfig.CradleLocation
Constructor
CradleResults - Enum in com.symbol.emdk.personalshopper
Defines all the error codes the cradle API returns.
CreateNameValuePair(String, String, String) - Static method in class com.symbol.emdk.ProfileManager
This function creates a name value pair string according to the Name-Value pair request.
credit(MifareDesfire.CreditType, byte, MifareDesfire.FileCommMode, int) - Method in class com.symbol.emdk.securenfc.MifareDesfire
Increases a value stored in a value file with specified value.Depending on communication settings of file, data read from card will be either plain or enciphered.
cryptoMethod - Variable in class com.symbol.emdk.securenfc.MifareDesfire.AppKeySettings
Cryptography method of whole application CRYPTO_DES_2K3DES (0x00) CRYPTO_3K3DES (0x01) CRYPTO_AES (0x02)
currentNumOfRecords - Variable in class com.symbol.emdk.securenfc.MifareDesfire.RecordFileSettings
Current number of records present in the file
A B C D E F G H I J K L M N O P Q R S T U V W X Y 
Skip navigation links