To display only the features present on a particular device, select one or more filters from the SmartDocs bar below.
Input fields accept ENGLISH ONLY.
Queries from MX are not supported on Zebra devices running Android 11 or later. See alternative method.
StageNow - 5.7
The "SmartDocs" bar can customize this page to show only the features present on a particular Zebra device.
OSX, MX and Android version information for a device can be found in the Android Settings panel or by querying the device through ADB, EMDK or the MX CSP. More info.
The Remote Scanner Manager (RemoteScannerMgr) is used to monitor, configure and apply firmware updates to supported Zebra Bluetooth scanners from a Zebra device running Android 5.1 (Lollipop) or later.
Remote Scanner Manager supports the Bluetooth scanners listed below.
Scanners in BOLD are supported only with SDM660-platform devices in SSI mode running Android 11 or later.
* Support for the DS3678 requires MX 6.3 or later on the host device.
Used to enter an Action to initiate a management function on remote Bluetooth scanners paired with and connected to the device. If performing a firmware update or other file-related function, file(s) must first be acquired using File Manager, StageNow, a compatible MDM solution or other means. Support for the Zebra DS3678 scanner requires MX 6.3 or later.
Parm Name: Action
| Option | Name | Description | Note | Status | Requires |
|---|---|---|---|---|---|
| 0 | Do Nothing | This value (or the absence of this parm from the XML) will cause no scanner management action to be performed. |
MX: 5.2+ |
||
| 1 | Apply 123Scan configuration package (see desc.) | Applies the 123Scan (.scncfg) configuration package to configure the scanner. File downloaded separately. Supports RS6000 and DS3678 only; DS requires MX 6.3 or later. |
MX: 5.2+ |
||
| 2 | Update Scanner Firmware | Applies the firmware (.dat file downloaded separately) specified in the corresponding field to update the scanner firmware. |
MX: 5.2+ |
||
| 3 | Reset Scanner (see desc.) | Cycles the power of the connected scanner to clear its memory and other volatile settings. Supports RS6000 and DS3678 only; DS requires MX 6.3 or later. |
MX: 5.2+ |
||
| 4 | Page Scanner (see desc.) | Activates a device-location sequence on the paired scanner consisting of beep sounds, LED flashes and vibration to help locate a misplaced device. Supports RS6000 and DS3678 only; DS requires MX 6.3 or later. |
MX: 5.2+ |
||
| 5 | Disconnect Bluetooth Scanner (see desc.) | Disconnects the currently connected Bluetooth scanner. Supports RS6000 and DS3678 only; DS requires MX 6.3 or later. |
MX: 5.2+ |
||
| 6 | Unpair Bluetooth Scanner (see desc.) | Removes the pairing information from the device for the selected Bluetooth scanner. Supports RS6000 and DS3678; DS requires MX 6.3 or later. |
MX: 5.2+ |
Used to enter the path and file name of the 123Scan configuration file, which is generated using Zebra's 123Scan Configuration Utility for Windows.
Parm value input rules
Shown if: Scanner Action is not "Do Nothing"
Parm Name: ConfigFile
Requires:
- MX: 5.2+
Used to enter the path and file name for updating the scanner firmware.
Parm value input rules
Shown if: Scanner Action is not "Do Nothing"
Parm Name: DatFile
Requires:
- MX: 5.2+
Used to enter the serial number of a scanner on which to perform an Action. This parameter can be used to verify that a scanner identified by its serial number is the unit that is currently connected. The Action will be performed only if the specified serial number matches that of the currently connected scanner (or if this parameter is left blank or not present in the XML). If the specified serial number does not match that of the connected scanner, no action will be performed and an error will be returned to the Result XML.
Parm value input rules
Shown if: Scanner Action is not "Do Nothing"
Parm Name: SerialNumber
Requires:
- MX: 5.2+