AutoTrigger Manager

To display only the features present on a particular device, select one or more filters from the SmartDocs bar below.

Input fields accept ENGLISH ONLY.

Queries from MX are not supported on Zebra devices running Android 11 or later. See alternative method.

StageNow - 5.7

Overview

The AutoTrigger Manager (AutoTriggerMgr) is used to configure automatic scan-triggering, which initiates scanning when a scan target is brought within proximity of the device sensor. Performing such functions would otherwise be manual. Automatic scanning is useful for such applications as those for supermarket self-service, in which a customer uses a hand-held device to scan items as they are placed in a shopping cart or basket.

This CSP is currently supported only on Zebra PS20 and WS50 devices.

Main Functionality

  • Set Trigger Mode as Automatic or Always On
  • Set target distance for automatic scan triggering

Trigger Mode

Controls the trigger mode of the device, and whether automatic functions are invoked. For example, the "Auto On" parameter can be used to automatically activate automatic scanning when the device is placed in a shopping cart, holster or other designated location. When trigger Mode is set to Auto On or Always On (options 1 or 2), the scanner is activated automatically whenever a scan target is detected by the proximity sensor. When trigger Mode is set to Off (option 0, the default), all scanning requires manual triggering by the device user.

Note: Supported on PS20 and WS50 devices only.

Parm Name: TriggerMode

Option Name Description Note Status Requires
3 Do not change This value (or the absence of this parm from the XML) causes no change to device settings; any previously selected setting is retained.

MX: 8.1+

0 Off Disables all automatic trigger-mode functions (default); all scanning requires manual triggering by the device user.

MX: 8.1+

1 Auto On Enables automatic trigger-mode activation when device is placed in a specific location, such as a shopping cart.

MX: 8.1+

2 Always On Sets the scan trigger to respond whenever a scan target is in range.

MX: 8.1+

Trigger Range

Determines the distance from the scan target at which a scan is triggered. Default=Near (option 0).

Note: Supported on PS20 and WS50 devices only.

Parm Name: TriggerRange

Option Name Description Note Status Requires
2 Do not change This value (or the absence of this parm from the XML) causes no change to device settings; any previously selected setting is retained.

MX: 8.1+

0 Near Sets the device to activate a scan when the scan window is within five inches of the scan target (default).

MX: 8.1+

1 Far Sets the device to activate a scan when the scan window is within 10 inches of the scan target.

MX: 8.1+