Input fields accept ENGLISH ONLY.
Queries from MX are not supported on Zebra devices running Android 11 or later. See alternative method.
The "SmartDocs" bar can customize this page to show only the features present on a particular Zebra device.
OSX, MX and Android version information for a device can be found in the Android Settings panel or by querying the device through ADB, EMDK or the MX CSP. More info.
The ScanModeMgr is used to adjust a TC55 device for left-handed or right-handed operation by swapping the Power key and Scan trigger on a device, or by configuring both side buttons as Scan triggers.
The power and scanner buttons are on opposing sides of the TC55, which can sometimes lead to incorrect presses. To adjust the device for optimum productivity, the ScanModeMgr can reverse the Power and Scan-trigger functions, or set both side buttons as Scan-triggers and move the Power function to the front.
Used to set the Scan Mode on the device, which reassigns the Power key and Scan-trigger functions.
Status: Deprecated. This feature will be discontinued in devices running Android 13 and later.
Parm Name: ScanModeAction
|Do Not Change
|The Scan Mode is not altered; any previously selected setting is retained.
|Sets the Scan Mode to its default setting for the TC55 device (Power on right, Scan-trigger on left).
|Scan 1 (Power is side key)
|Sets the Power key as the left-side key and the Scan trigger as the right-side key (opposite of the default setting).
|Scan 2 (Power is front key)
|Sets both side keys as Scan triggers and moves the Power-key function to the front key.