SerialComm

Enterprise Browser 3.3

Overview

The SerialComm API is an extension to facilitate serial communications using Enterprise Browser.

Version History

  • Introduced in EB 2.5

Methods

disable()

Disables the serial channel, preventing communication with a remote device.

Parameters

  • callback : CallBackHandler

Callback

Async Callback Returning Parameters: HASH

    • status : STRING

      Connection status will either be success or failure.

    • message : STRING

      Returns the appropriate message.

Returns

Synchronous Return:

  • Void

Platforms

  • Android

Method Access:

  • Instance Method: This method can be accessed via an instance object of this class:
    • myObject.disable()
  • Default Instance: This method can be accessed via the default instance object of this class.
    • EB.SerialComm.disable()

enable()

Enables a serial channel for the application to communicate with a remote device.

Parameters

  • callback : CallBackHandler

Callback

Async Callback Returning Parameters: HASH

    • status : STRING

      Connection status will either be success or failure.

    • message : STRING

      Returns the appropriate message.

Returns

Synchronous Return:

  • Void

Platforms

  • Android

Method Access:

  • Instance Method: This method can be accessed via an instance object of this class:
    • myObject.enable()
  • Default Instance: This method can be accessed via the default instance object of this class.
    • EB.SerialComm.enable()

enumerate()

Gets a list of supported ports on the device.

Parameters

  • callback : CallBackHandler

Callback

Async Callback Returning Parameters: ARRAY

    • Object : SELF_INSTANCE: EB.SerialComm

Returns

Synchronous Return:

  • Void

Platforms

  • Android

Method Access:

  • Class Method: This method can be accessed only using the API class object.
    • EB.SerialComm.enumerate()

getDefault()

Returns an object that represents the default instance of the API class. For example, Camera.getDefault returns a Camera object that represents the default camera.

Parameters

  • callback : CallBackHandler

Callback

Async Callback Returning Parameters: SELF_INSTANCE

    Returns

    Synchronous Return:

    • SELF_INSTANCE : Default object of Module.

    Platforms

    • Android

    Method Access:

    • Class Method: This method can only be accessed via the API class object.
      • EB.SerialComm.getDefault()

    read(STRING readTimeOut)

    Reads the available data and returns it immediately. If no data is available, waits until a timeout occurs. Null is returned if no data is available.

    Parameters

    • readTimeOut : STRING

      Wait for data until timeout. The timeout unit is milli seconds. A timeout of zero means the calling read will wait forever unless interrupted by disable or release.

    • callback : CallBackHandler

    Callback

    Async Callback Returning Parameters: HASH

      • status : STRING

        Read data status will either be success or failure.

      • message : STRING

        Returns the appropriate message.

      • data : STRING

        On Success, it will return the data.

    Returns

    Synchronous Return:

    • Void

    Platforms

    • Android

    Method Access:

    • Instance Method: This method can be accessed via an instance object of this class:
      • myObject.read(STRING readTimeOut)
    • Default Instance: This method can be accessed via the default instance object of this class.
      • EB.SerialComm.read(STRING readTimeOut)

    setDefault(SELF_INSTANCE: EB.SerialComm defaultInstance)

    Allows setting of attributes of the default object instance by passing in an object of the same class.

    Parameters

    • defaultInstance : SELF_INSTANCE: EB.SerialComm

      An instance object that is of the same class.

    • callback : CallBackHandler

    Returns

    Synchronous Return:

    • Void

    Platforms

    • Android

    Method Access:

    • Class Method: This method can be accessed only via the API class object.
      • EB.SerialComm.setDefault(SELF_INSTANCE: EB.SerialComm defaultInstance)

    write(STRING data)

    Writes from buffer to the opened communication channel.

    Parameters

    • data : STRING

      Buffer which contains the data to write.

    • callback : CallBackHandler

    Callback

    Async Callback Returning Parameters: HASH

      • status : STRING

        Write data status will either be success or failure.

      • message : STRING

        Returns the appropriate message.

    Returns

    Synchronous Return:

    • Void

    Platforms

    • Android

    Method Access:

    • Instance Method: This method can be accessed only via an instance object of this class:
      • myObject.write(STRING data)
    • Default Instance: This method can be accessed via the default instance object of this class.
      • EB.SerialComm.write(STRING data)

    Properties

    ParityBit

    Type

    STRING

    Description

    Parity bits are used for detecting error in the transmission.

    Values

    Possible Values (STRING):

    • Constant: EB.SerialComm.EVEN - String: EVEN Sets the parity bit so that the count of bits set is an even number
    • Constant: EB.SerialComm.MARK - String: MARK Leaves the parity bit set to 1.
    • Constant: EB.SerialComm.NONE - String: NONE No parity check occurs.
    • Constant: EB.SerialComm.ODD - String: ODD Sets the parity bit so that the count of bits set is an odd number.
    • Constant: EB.SerialComm.SPACE - String: SPACE Leaves the parity bit set to 0.

    Access

    • Instance: This property can be accessed via an instance object of this class: myObject.ParityBit
    • Default Instance: This property can be accessed via the default instance object of this class.
      • EB.SerialComm.ParityBit

    Platforms

    • Android

    baudRates

    Type

    STRING

    Description

    Specifies the baud at which the communications device operates.

    Values

    Possible Values (STRING):

    • Constant: EB.SerialComm.BR_300 - String: BR_300 Baud rate value is 300
    • Constant: EB.SerialComm.BR_1200 - String: BR_1200 Baud rate value is 1200
    • Constant: EB.SerialComm.BR_2400 - String: BR_2400 Baud rate value is 2400
    • Constant: EB.SerialComm.BR_4800 - String: BR_4800 Baud rate value is 4800
    • Constant: EB.SerialComm.BR_9600 - String: BR_9600 Baud rate value is 9600
    • Constant: EB.SerialComm.BR_14400 - String: BR_14400 Baud rate value is 14400
    • Constant: EB.SerialComm.BR_19200 - String: BR_19200 Baud rate value is 19200
    • Constant: EB.SerialComm.BR_28800 - String: BR_28800 Baud rate value is 28800
    • Constant: EB.SerialComm.BR_38400 - String: BR_38400 Baud rate value is 38400
    • Constant: EB.SerialComm.BR_57600 - String: BR_57600 Baud rate value is 57600
    • Constant: EB.SerialComm.BR_115200 - String: BR_115200 Baud rate value is 115200
    • Constant: EB.SerialComm.BR_230400 - String: BR_230400 Baud rate value is 230400
    • Constant: EB.SerialComm.BR_460800 - String: BR_460800 Baud rate value is 460800
    • Constant: EB.SerialComm.BR_921600 - String: BR_921600 Baud rate value is 921600

    Access

    • Instance: This property can be accessed via an instance object of this class: myObject.baudRates
    • Default Instance: This property can be accessed via the default instance object of this class.
      • EB.SerialComm.baudRates

    Platforms

    • Android

    dataBit

    Type

    STRING

    Description

    Specifies the number of data bits for each character.

    Values

    Possible Values (STRING):

    • Constant: EB.SerialComm.EIGHT - String: EIGHT Data bits per byte is 8
    • Constant: EB.SerialComm.SEVEN - String: SEVEN Data bits per byte is 7.

    Access

    • Instance: This property can be accessed via an instance object of this class: myObject.dataBit
    • Default Instance: This property can be accessed via the default instance object of this class.
      • EB.SerialComm.dataBit

    Platforms

    • Android

    flowControlMode

    Type

    STRING

    Description

    Specifies the flow control to be used.

    Values

    Possible Values (STRING):

    • Constant: EB.SerialComm.DSR_DTR - String: DSR_DTR Hardware flow control DSR/DTR
    • Constant: EB.SerialComm.NONE - String: NONE No flow control
    • Constant: EB.SerialComm.RTS_CTS - String: RTS_CTS Hardware flow control RTS/CTS
    • Constant: EB.SerialComm.XON_XOFF - String: XON_XOFF Software flow control

    Access

    • Instance: This property can be accessed via an instance object of this class: myObject.flowControlMode
    • Default Instance: This property can be accessed via the default instance object of this class.
      • EB.SerialComm.flowControlMode

    Platforms

    • Android

    friendlyName

    Type

    STRING Read Only

    Description

    Returns the friendly name associated with the Serial Port.

    Access

    • Instance: This property can be accessed via an instance object of this class: myObject.friendlyName
    • Default Instance: This property can be accessed via the default instance object of this class.
      • EB.SerialComm.friendlyName

    Platforms

    • Android

    stopBit

    Type

    STRING

    Description

    Specifies the number of stop bits to be used.

    Values

    Possible Values (STRING):

    • Constant: EB.SerialComm.ONE - String: ONE One stop bit is used.
    • Constant: EB.SerialComm.ONE_AND_HALF - String: ONE_AND_HALF 1.5 stop bits are used.
    • Constant: EB.SerialComm.TWO - String: TWO two stop bits are used.

    Access

    • Instance: This property can be accessed via an instance object of this class: myObject.stopBit
    • Default Instance: This property can be accessed via the default instance object of this class.
      • EB.SerialComm.stopBit

    Platforms

    • Android

    Examples

    Enable a Serial Comm port and read/write data

    This example shows how to enable/disable a device and to read and write data. Note that this example assumes that the ebapi-modules.js file is in the same folder as the HTML invoking it.

    
    
                                 <html>
                                  <head>
                                  <script type="text/javascript" src="ebapi-modules.js"></script> 
                                  <script>
                                  var SerialPort;
    
                                    function enumCallBack(params){
                                        alert("enumCallBack");
                                            if(params){     // Most of these methods have callbacks but null 'params' sent.
                                                //alert(params);
                                            }
    
    
                                    }
                                    function Enumerate()
                                    { 
                                    alert("enumerate");
                                      SerialPort = EB.SerialComm.enumerate(enumCallBack); 
                                        alert(SerialPort[0].getId());       
                                    }   
                                    function Enable()
                                    { 
                                        alert("Enable");
    
                                        EB.SerialComm.enable(enableCallback);
    
                                    } 
    
                                    function enableCallback(dat) {
                                    alert("enableCallback");
                                        document.getElementById("myDiv").innerHTML = "Enable:";
                                        document.getElementById("myDiv").innerHTML += "<li>Status:"+dat.status+"<br/><li>message:"+dat.message ;
                                    }
                                    function disableCallback(dat) {
                                        alert("disableCallback");
                                        document.getElementById("myDiv").innerHTML = "Disable:";
                                        document.getElementById("myDiv").innerHTML += "<li>Status:"+dat.status+"<br/><li>message:"+dat.message ;
                                    }   
                                    function Disable()
                                    { 
                                      alert("Disable");
                                      EB.SerialComm.disable(disableCallback);    
                                    }   
                                    function Read()
                                    { 
                                      alert("Read");
                                      EB.SerialComm.read("10000",readCallback);    
                                    } 
                                    function readCallback(dat) {
                                        alert("readCallback");
                                        document.getElementById("myDiv").innerHTML = "Read Data:<br/>";
                                        document.getElementById("myDiv").innerHTML += "<li>Status:"+dat.status+"<br/><li>Data:"+dat.data +"<br/><li>message:"+dat.message ;
                                    }
                                    function Write()
                                    { 
                                      alert("Write");
                                      //SerialPort[0].write("100abcd011");
                                      var writeData= document.getElementById("writeData").value;
                                      EB.SerialComm.write(writeData,writeCallback);    
                                    }
                                        function writeCallback(dat) {
                                        alert("writeCallback");
                                        document.getElementById("myDiv").innerHTML = "Write Data:<br/>";
                                        document.getElementById("myDiv").innerHTML += "<li>Status:"+dat.status+"<br/><li>message:"+dat.message ;
                                    }
                                    function SetConfig()
                                    { 
                                      alert("SetConfig");
                                      alert("Friendly name "+EB.SerialComm.friendlyName);
                                        EB.SerialComm.baudRates= EB.SerialComm.BR_9600;
                                        alert("baudRates "+EB.SerialComm.baudRates);
    
                                        EB.SerialComm.flowControlMode=EB.SerialComm.NONE;
                                        alert("flowControlMode "+EB.SerialComm.flowControlMode);
    
    
                                        EB.SerialComm.ParityBit=EB.SerialComm.NONE;
                                        alert("ParityBit "+EB.SerialComm.ParityBit);    
    
                                        EB.SerialComm.stopBit=EB.SerialComm.ONE;
                                        alert("stopBit "+EB.SerialComm.stopBit);    
    
                                        EB.SerialComm.dataBit=EB.SerialComm.EIGHT;
                                        alert("dataBit "+EB.SerialComm.dataBit);
                                    }
                                  </script>
                                  </head> 
                                  <body>
                                    <br><br> <div id="availableScanners">EnumScanners goes Here</div>
                                    <br><br> <div id=myJsID></div>
                                    <br><br> <div id="msg">Messages Go Here</div>
                                    <br><br> <input type='button' onClick="Enumerate()" value="Enumerate"/>
                                    <br><br> <input type='button' onClick="Enable()" value="Enable"/>
                                    <br><br> <input type="button" onclick="Disable()" value="Disable">
                                    <br><br> <input type="button" onclick="Read()" value="Read" />   
                                    <br><br> <input type="button" onclick="Write()" value="Write" />
                                    <input type="text" id="writeData" value="" />
                                    <br><br> <input type="button" onclick="SetConfig()" value="Set and Get Config" />
                                    <div id="myDiv"></div>
                                  </body>
                                  </html>