ScannerConfig.DecoderParameters.Code128Decoder

EMDK For Xamarin 7.0

The Code128 class provides access to parameters that are available for the Code128 decoder.

Type - Symbol.XamarinEMDK.Barcode.ScannerConfig.DecoderParameters.BaseDecoder

Properties

CheckIsbtTable

The ISBT specification includes a table that lists several types of ISBT bar codes that are commonly used in pairs. If ISBT128 Concat Mode is set, enable Check ISBT T able to concatenate only those pairs found in this table. Other types of ISBT codes are not concatenated.

Type - System.Boolean

EnableEan128

Flag to enable EAN128 subtype.

Type - System.Boolean

EnableIsbt128

Flag to enable ISBT128.

Type - System.Boolean

EnablePlain

Flag to enable other sub types besides GS1-128 and ISBT-128

Type - System.Boolean

Isbt128ConcatMode

Select an option for concatenating pairs of ISBT code types. Use enum ScannerConfig.Isbt128ContactMode.

Type - Symbol.XamarinEMDK.Barcode.ScannerConfig.Isbt128ConcatMode

Length1

Use to set decode lengths. The supported range is 0 to 55.

Type - System.Int32

Length2

Use to set decode lengths. The supported range is 0 to 55.

Type - System.Int32

ReducedQuietZone

Flag to Enable or Disable decoding of Code 128 barcodes with reduced quiet zones. If you enable, select a OneDQuietZoneLevel to set the effort level.

Type - System.Boolean

Redundancy

Sets the reader to read the bar code twice before accepting data.

Type - System.Boolean

SecurityLevel

The scanner of fers four levels of decode security for Code 128 bar codes. Select increasing levels of security for decreasing levels of bar code quality. There is an inverse relationship between security and scanner aggressiveness, so choose only that level of security necessary for any given application. Use enum ScannerConfig.SecurityLevel.

Type - Symbol.XamarinEMDK.Barcode.ScannerConfig.SecurityLevel