ScannerConfig.ReaderParameters.ReaderSpecifics.CameraSpecifics

EMDK For Xamarin 5.0

CameraSpecific class provides access to the camera scanner specific parameters.

Type - Java.Lang.Object

Properties

AimTimer

Duration in milliseconds for timed aim types ScannerConfig.AimType.TIMED_HOLD and ScannerConfig.AimType.TIMED_RELEASE.

Type - System.Int32

AimType

Describes the type of aiming to use.

Type - Symbol.XamarinEMDK.Barcode.ScannerConfig.AimType

BeamTimer

Sets the maximum amount of time that the reader remains on (0 - 60,000 ms in increments of 100 ms). A value of 0 sets the reader to stay on indefinitely.

Type - System.Int32

ContinuousRead

ContinuousRead class provides access to continuous scanning related parameters.

Type - Symbol.XamarinEMDK.Barcode.ScannerConfig.ReaderParameters.ReaderSpecifics.ContinuousRead

DifferentSymbolTimeout

This setting is used to prevent the scanner from decoding another symbol within this time interval.

Type - System.Int32

IlluminationMode

Turns camera illumination on and off. This option is only available when camera is selected in the Barcode input Scanner selection option. Use class ScannerConfig.IlluminationMode.

Type - Symbol.XamarinEMDK.Barcode.ScannerConfig.IlluminationMode

Inverse1DMode

This parameter allows the user to select decoding on inverse 1D bar codes. Use class ScannerConfig.Inverse1DMode.

Type - Symbol.XamarinEMDK.Barcode.ScannerConfig.Inverse1DMode

LinearSecurityLevel

Sets the number of times a bar code is read to confirm an accurate decode. Use class ScannerConfig.LinearSecurityLevel..

Type - Symbol.XamarinEMDK.Barcode.ScannerConfig.LinearSecurityLevel

OneDQuietZoneLevel

This parameter sets the effort at which the decoder will attempt to decode margin-less barcodes. Behavior of the level set to this parameter will vary based on the margin-less decoder selected. Note: Higher margin-less levels will increase decoding times and the risk of decoding errors. Zebra therefore recommends enabling only the symbologies that require a higher margin-less level, and leaving all other symbologies at the default level of 1.

Type - Symbol.XamarinEMDK.Barcode.ScannerConfig.OneDQuietZoneLevel

PicklistEx

Allows the imager to decode only the barcode that is directly under the cross-hair/reticle (+) part of the pattern.

Type - Symbol.XamarinEMDK.Barcode.ScannerConfig.PicklistEx

PoorQualityDecodeEffortLevel

This parameter permits selection of enhancement modes for decoding barcodes of poor or degraded quality.

Type - Symbol.XamarinEMDK.Barcode.ScannerConfig.PoorQualityDecodeEffortLevel

SameSymbolTimeout

This setting is used to prevent the scanner driver from decoding the same symbol within this time interval.

Type - System.Int32

ViewfinderMode

Configures the Viewfinder modes supported for camera scanning. Use class ScannerConfig.ViewFinderMode.

Type - Symbol.XamarinEMDK.Barcode.ScannerConfig.ViewFinderMode

ViewfinderOffsetX

Sets the X Axis position of the top left corner of the view finder.

Type - System.Int32

ViewfinderOffsetY

Sets the Y Axis position of the top left corner of the view finder.

Type - System.Int32

ViewfinderSize

Sets the size of the view finder window in camera scanner.

Type - System.Int32