ScannerConfig.ReaderParameters.ReaderSpecifics.LaserSpecifics

EMDK For Xamarin 4.0

LaserSpecific class provides access to the laser scanner specific parameters.

Type - Java.Lang.Object

Properties

AdaptiveScanning

This parameter enables or disables the adaptive scanning. When adaptive scanning is enabled, the scan engine will automatically toggle between 2 scan angles, wide and narrow, allowing the scan engine to decode bar codes based on the distance.

Type - Symbol.XamarinEMDK.Barcode.ScannerConfig.AdaptiveScanning

AimTimer

Duration in milliseconds for timed aim types ScannerConfig.AimType.TIMED_HOLD and ScannerConfig.AimType.TIMED_RELEASE.

Type - System.Int32

AimType

Describes the type of aiming to use.

Type - Symbol.XamarinEMDK.Barcode.ScannerConfig.AimType

BeamTimer

Sets the maximum amount of time that the reader remains on (0 - 60,000 ms in increments of 100 ms). A value of 0 sets the reader to stay on indefinitely.

Type - System.Int32

BeamWidth

Controls the beam width of a laser scanner. Laser beam width can be shortened or widened using this parameter.

Type - Symbol.XamarinEMDK.Barcode.ScannerConfig.BeamWidth

ContinuousRead

ContinuousRead class provides access to continuous scanning related parameters.

Type - Symbol.XamarinEMDK.Barcode.ScannerConfig.ReaderParameters.ReaderSpecifics.ContinuousRead

DifferentSymbolTimeout

This setting is used to prevent the scanner from decoding another symbol within this time interval.

Type - System.Int32

Inverse1DMode

This parameter allows the user to select decoding on inverse 1D bar codes. Use enum ScannerConfig.Inverse1DMode.

Type - Symbol.XamarinEMDK.Barcode.ScannerConfig.Inverse1DMode

LinearSecurityLevel

Sets the number of times a bar code is read to confirm an accurate decode. Use enum ScannerConfig.LinearSecurityLevel.

Type - Symbol.XamarinEMDK.Barcode.ScannerConfig.LinearSecurityLevel

OneDQuietZoneLevel

This parameter sets the effort at which the decoder will attempt to decode margin-less barcodes. Behavior of the level set to this parameter will vary based on the margin-less decoder selected. Note: Higher margin-less levels will increase decoding times and the risk of decoding errors. Zebra therefore recommends enabling only the symbologies that require a higher margin-less level, and leaving all other symbologies at the default level of 1.

Type - Symbol.XamarinEMDK.Barcode.ScannerConfig.OneDQuietZoneLevel

PoorQualityDecodeEffortLevel

This parameter permits selection of enhancement modes for decoding barcodes of poor or degraded quality.

Type - Symbol.XamarinEMDK.Barcode.ScannerConfig.PoorQualityDecodeEffortLevel

PowerMode

Set scanner power mode. Use enum ScannerConfig.PowerMode.

Type - Symbol.XamarinEMDK.Barcode.ScannerConfig.PowerMode

SameSymbolTimeout

This setting is used to prevent the scanner driver from decoding the same symbol within this time interval.

Type - System.Int32