LaserSpecific class provides access to the laser scanner specific parameters.
Type - Java.Lang.Object
Properties
AdaptiveScanning
This parameter enables or disables the adaptive scanning. When adaptive scanning is enabled, the scan engine will automatically toggle between 2 scan angles, wide and narrow, allowing the scan engine to decode bar codes based on the distance.
Type - Symbol.XamarinEMDK.Barcode.ScannerConfig.AdaptiveScanning
BeamTimer
Sets the maximum amount of time that the reader remains on (0 - 60,000 ms in increments of 100 ms). A value of 0 sets the reader to stay on indefinitely.
Type - System.Int32
BeamWidth
Controls the beam width of a laser scanner. Laser beam width can be shortened or widened using this parameter.
Type - Symbol.XamarinEMDK.Barcode.ScannerConfig.BeamWidth
ContinuousRead
ContinuousRead class provides access to continuous scanning related parameters.
Type - Symbol.XamarinEMDK.Barcode.ScannerConfig.ReaderParameters.ReaderSpecifics.ContinuousRead
Inverse1DMode
This parameter allows the user to select decoding on inverse 1D bar codes. Use enum ScannerConfig.Inverse1DMode.
Type - Symbol.XamarinEMDK.Barcode.ScannerConfig.Inverse1DMode
LinearSecurityLevel
Sets the number of times a bar code is read to confirm an accurate decode. Use enum ScannerConfig.LinearSecurityLevel.
Type - Symbol.XamarinEMDK.Barcode.ScannerConfig.LinearSecurityLevel
OneDQuietZoneLevel
This parameter sets the effort at which the decoder will attempt to decode margin-less barcodes. Behavior of the level set to this parameter will vary based on the margin-less decoder selected. Note: Higher margin-less levels will increase decoding times and the risk of decoding errors. Zebra therefore recommends enabling only the symbologies that require a higher margin-less level, and leaving all other symbologies at the default level of 1.
Type - Symbol.XamarinEMDK.Barcode.ScannerConfig.OneDQuietZoneLevel
PoorQualityDecodeEffortLevel
This parameter permits selection of enhancement modes for decoding barcodes of poor or degraded quality.
Type - Symbol.XamarinEMDK.Barcode.ScannerConfig.PoorQualityDecodeEffortLevel
PowerMode
Set scanner power mode. Use enum ScannerConfig.PowerMode.
Type - Symbol.XamarinEMDK.Barcode.ScannerConfig.PowerMode