This document contains "SmartDocs" capabilities. This will allow you to easily see only the content that is relevant to the Zebra device you are working with.
MX Features will be available on a device based on a combination of factors:
After identifying the version information for your device, simply select them in the SmartDocs bar. Any section that does not apply to your device will be greyed out. You can clear all settings by hitting the SmartDocs button. Clicking the back and next buttons on the SmartDocs bar will navigate to the sections that are relevant to your device.
The DisplayMgr provides control of certain display screen features on the device.
Used to set the length of time the device will wait during periods of inactivity (without screen touches or key presses) before turning off the screen to conserve power. Ideally, this interval should represent a balance between battery preservation and user convenience.
Note: Android supports only the display-screen timeout settings shown in the table below. Specifying a value between any two supported values will change the setting to the closest supported value. Specifying a value outside the minimum or maximum shown will cause an error in the Result XML document and the setting change will be ignored.
Parm Name: TimeoutInterval
Option | Name | Description | Requires |
---|---|---|---|
0 | Do not change | This value (or the absence of this parm from the XML) will cause no change to the current display screen timeout interval; any previously selected setting will be retained. |
MX: 4.3+ Android API Level: 1+ |
15 | 15 seconds after Display Timeout | Causes the display screen to timeout after 15 seconds of device-user inaction. |
MX: 4.3+ Android API Level: 1+ |
30 | 30 seconds after Display Timeout | Causes the display screen to timeout after 30 seconds of device-user inaction. |
MX: 4.3+ Android API Level: 1+ |
60 | 1 minute after Display Timeout | Causes the display screen to timeout after one minute of device-user inaction. |
MX: 4.3+ Android API Level: 1+ |
120 | 2 minutes after Display Timeout | Causes the display screen to timeout after two minutes of device-user inaction. |
MX: 4.3+ Android API Level: 1+ |
300 | 5 minutes after Display Timeout | Causes the display screen to timeout after five minutes of device-user inaction. |
MX: 4.3+ Android API Level: 1+ |
600 | 10 minutes after Display Timeout | Causes the display screen to timeout after 10 minutes of device-user inaction. |
MX: 4.3+ Android API Level: 1+ |
1800 | 30 minutes after Display Timeout | Causes the display screen to timeout after 30 minutes of device-user inaction. |
MX: 4.3+ Android API Level: 1+ |
Controls whether a device can use Android's built-in screen capture capability, which captures the contents of the screen and saves it to a file on the device.
Note: The method for capturing the screen generally involves a combination of simultaneous key presses, and varies from one device to another.
Parm Name: ScreenShotUsage
Option | Name | Description | Requires |
---|---|---|---|
0 | Do Nothing | This value (or the absence of this parm from the XML) will cause no change to the current behavior; any previously selected setting will be retained. |
OSX: 3.6,4.5 ONLY NOT IN OSX: 4.0 - 4.4 MX: 5.0+ |
1 | Enable | Enables the ability to use the Android screen capture feature. |
OSX: 3.6,4.5 ONLY NOT IN OSX: 4.0 - 4.4 MX: 5.0+ |
2 | Disable | Disables the ability to use the Android screen capture feature. |
OSX: 3.6,4.5 ONLY NOT IN OSX: 4.0 - 4.4 MX: 5.0+ |