S-Index

A B C D E F G H I J K L M N O P Q R S T U V W Z

S

SAM class will represent and provides access to the physical SAMs

same_barcode_timeout - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.ReaderParams

Deprecated.

This setting is used to prevent the scanner driver from decoding the same symbol within this time interval (applicable only when aim_type = AIM_TYPE.CONTINUOUS_READ).

sameSymbolTimeout - Variable in class com.symbol.emdk.barcode.ScannerConfig.ReaderParams.ReaderSpecific.CameraSpecific

This setting is used to prevent the scanner driver from decoding the same symbol within this time interval.

sameSymbolTimeout - Variable in class com.symbol.emdk.barcode.ScannerConfig.ReaderParams.ReaderSpecific.ContinuousRead

Deprecated.

We recommend using the new fields shown below in your new applications.

For Camera Scanner: ScannerConfig.ReaderParams.ReaderSpecific.CameraSpecific.sameSymbolTimeout

For Imager Scanner: ScannerConfig.ReaderParams.ReaderSpecific.ImagerSpecific.sameSymbolTimeout

For Laser Scanner: ScannerConfig.ReaderParams.ReaderSpecific.LaserSpecific.sameSymbolTimeout

This setting is used to prevent the scanner driver from decoding the same symbol within this time interval (applicable only when isContinuousScan = true). Basically in the continuous mode the user can perform rapid scan and to prevent the user from decoding the same barcode twice user can set this value to an appropriate interval (in milliseconds). A value of 0 means no interval is required between two successive reads. Boundary values are 0 to 5000 in milliseconds in 500 increments such as 0, 500, 1000... etc

sameSymbolTimeout - Variable in class com.symbol.emdk.barcode.ScannerConfig.ReaderParams.ReaderSpecific.ImagerSpecific

This setting is used to prevent the scanner driver from decoding the same symbol within this time interval.

sameSymbolTimeout - Variable in class com.symbol.emdk.barcode.ScannerConfig.ReaderParams.ReaderSpecific.LaserSpecific

This setting is used to prevent the scanner driver from decoding the same symbol within this time interval.

SAMException - Exception in com.symbol.emdk.sam

The methods of SAM API may throw a SAMException when an error occurs.

SAMManager - Class in com.symbol.emdk.sam

Once the SAMManager is initialized application can query the available SAM's information to the application.

SAMResults - Enum in com.symbol.emdk.sam

Defines all the error codes that the SAM API returns.

SAMType - Enum in com.symbol.emdk.sam

Describes the type of SAM

scanAndPair(String) - Method in class com.symbol.emdk.scanandpair.ScanAndPairManager

This is an asynchronous method.

ScanAndPairConfig - Class in com.symbol.emdk.scanandpair

The ScanAndPairConfig class provides a way to configure the settings to use it in scanAndPair() or scanAnUnpair() methods.

ScanAndPairConfig.BluetoothInfo - Class in com.symbol.emdk.scanandpair

This class is used by the ScanAndPairTool class.

ScanAndPairConfig.DeviceIdentifier - Enum in com.symbol.emdk.scanandpair

Provides the list of DeviceIdentifier types.

ScanAndPairConfig.NotificationType - Enum in com.symbol.emdk.scanandpair

This enum is used by the ScanAndPair APIs to set the notification type.

ScanAndPairConfig.ScanDataType - Enum in com.symbol.emdk.scanandpair

Provides the different types of barcode data to be scanned.

ScanAndPairConfig.ScanInfo - Class in com.symbol.emdk.scanandpair

This class is used by the ScanAndPairTool class.

ScanAndPairConfig.TriggerType - Enum in com.symbol.emdk.scanandpair

Provides the list of supported trigger types.

ScanAndPairException - Exception in com.symbol.emdk.scanandpair

ScanAndPairManager - Class in com.symbol.emdk.scanandpair

The ScanAndPair provides simple methods to scan a Bluetooth barcode (name or address) of a remote Bluetooth device and pair/unpair with the remote Bluetooth device.

ScanAndPairManager.StatusListener - Interface in com.symbol.emdk.scanandpair

An interface for notifying client applications to notify scan and pair or unpair events.

ScanAndPairResults - Enum in com.symbol.emdk.scanandpair

Provides list of result codes for ScanAndPair class.

scanAndUnpair() - Method in class com.symbol.emdk.scanandpair.ScanAndPairManager

This is an asynchronous method.

ScanDataCollection - Class in com.symbol.emdk.barcode

The ScanDataCollection object gives scanning result and the collection of ScanData.

ScanDataCollection.LabelType - Enum in com.symbol.emdk.barcode

List of label types of the scanner data

ScanDataCollection.ScanData - Class in com.symbol.emdk.barcode

The ScanData object gives information on the barcode data scanned.

scanDataType - Variable in class com.symbol.emdk.scanandpair.ScanAndPairConfig.ScanInfo

Specifies the type of barcode data to be scanned.

scanInfo - Variable in class com.symbol.emdk.scanandpair.ScanAndPairConfig

Specifies the scanning related information.

ScanInfo() - Constructor for class com.symbol.emdk.scanandpair.ScanAndPairConfig.ScanInfo

Default Constructor for ScanInfo class to assign the default values to its members.

scanMode - Variable in class com.symbol.emdk.barcode.ScannerConfig.ReaderParams.ReaderSpecific.CameraSpecific

Deprecated.

We recommend using the new scanning mode field introduced in the ScannerConfig.NGSimulScanParams class in your new applications.

Sets the scan mode. This allows to select one type from the ScanMode enum.

 
 	Example Usage:
 	readerParams.readerSpecific.cameraSpecific.scanMode = ScanMode.SINGLE_BARCODE;

scanMode - Variable in class com.symbol.emdk.barcode.ScannerConfig.ReaderParams.ReaderSpecific.ImagerSpecific

Deprecated.

We recommend using the new scanning mode field introduced in the ScannerConfig.NGSimulScanParams class in your new applications.

Sets the scan mode. This allows to select one type from the ScanMode enum.

 
 	Example Usage:
 	readerParams.scanMode = ScanMode.SINGLE_BARCODE;

Scanner - Class in com.symbol.emdk.barcode

Scanner class will represent and provides access to the physical scanner device.

Scanner.DataListener - Interface in com.symbol.emdk.barcode

An interface for notifying client applications when the scan data is available.

Scanner.StatusListener - Interface in com.symbol.emdk.barcode

An interface for notifying client applications to notify scan events.

Scanner.TriggerType - Enum in com.symbol.emdk.barcode

List of supported trigger type

scanner_input_enabled - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode

Deprecated.

Gets and Sets scanner enabled state ProfileConfig.ENABLED_STATE.

ScannerConfig - Class in com.symbol.emdk.barcode

The ScannerConfig class provides access to scanner configuration settings.

ScannerConfig.AdaptiveScanning - Enum in com.symbol.emdk.barcode

Enable or Disable Adaptive scanning.

ScannerConfig.AimingPattern - Enum in com.symbol.emdk.barcode

Describes the aiming pattern to be turned ON/OFF.

ScannerConfig.AimType - Enum in com.symbol.emdk.barcode

Describes the type of aiming to use.

ScannerConfig.AudioStreamType - Enum in com.symbol.emdk.barcode

Volume slider type for decode audio feedback.

ScannerConfig.AutoCharacterSetFailureOption - Enum in com.symbol.emdk.barcode

Failure option for auto character set selection.

ScannerConfig.AutoCharacterSetPreference - Enum in com.symbol.emdk.barcode

Selection of character sets available for automatic decoding.

ScannerConfig.BeamWidth - Enum in com.symbol.emdk.barcode

Controls the beam width of a laser scanner.

ScannerConfig.BooklandFormat - Enum in com.symbol.emdk.barcode

Lists the Bookland formats

ScannerConfig.CharacterSet - Enum in com.symbol.emdk.barcode

Selection of character set for decoding the barcode.

ScannerConfig.CheckDigit - Enum in com.symbol.emdk.barcode

The number of check digits to be verified.

ScannerConfig.CheckDigitScheme - Enum in com.symbol.emdk.barcode

Two algorithms are possible for the verification of the second MSI check digit.

ScannerConfig.CheckDigitType - Enum in com.symbol.emdk.barcode

Verify data integrity.

ScannerConfig.CodeIdType - Enum in com.symbol.emdk.barcode

A Code ID character identifies the code type of a scanned barcode.

ScannerConfig.CouponReport - Enum in com.symbol.emdk.barcode

Supported Coupon modes

ScannerConfig.DecodeAudioFeedbackMode - Enum in com.symbol.emdk.barcode

Describes the Audio Feedback Mode is given by the host device and remote scanner.

ScannerConfig.DecodeLEDFeedbackMode - Enum in com.symbol.emdk.barcode

Describes the LED Feedback mode is given by the host device and remote scanner.

ScannerConfig.DecoderParams - Class in com.symbol.emdk.barcode

The DecoderParams class contains decoder parameters that are used by multiple decoder symbologies.

ScannerConfig.DecoderParams.AustralianPostal - Class in com.symbol.emdk.barcode

The AustralianPostal class provides access to parameters that are available for the AustralianPostal decoder.

ScannerConfig.DecoderParams.Aztec - Class in com.symbol.emdk.barcode

The Aztec class provides access to parameters that are available for the Aztec decoder.

ScannerConfig.DecoderParams.BaseDecoder - Class in com.symbol.emdk.barcode

The BaseDecoder class is the parent decoder to all decoders and is inherited by all decoders.

ScannerConfig.DecoderParams.CanadianPostal - Class in com.symbol.emdk.barcode

The CanadianPostal class provides access to parameters that are available for the CanadianPostal decoder.

ScannerConfig.DecoderParams.Chinese2of5 - Class in com.symbol.emdk.barcode

The Chinese2of5 class provides access to parameters that are available for the Chinese2of5 decoder.

ScannerConfig.DecoderParams.CodaBar - Class in com.symbol.emdk.barcode

The CodaBar class provides access to parameters that are available for the CodaBar decoder.

ScannerConfig.DecoderParams.Code11 - Class in com.symbol.emdk.barcode

The Code11 class provides access to parameters that are available for the Code11 decoder.

ScannerConfig.DecoderParams.Code128 - Class in com.symbol.emdk.barcode

The Code128 class provides access to parameters that are available for the Code128 decoder.

ScannerConfig.DecoderParams.Code39 - Class in com.symbol.emdk.barcode

The Code39 class provides access to parameters that are available for the Code39 decoder.

ScannerConfig.DecoderParams.Code93 - Class in com.symbol.emdk.barcode

The Code93 class provides access to parameters that are available for the Code93 decoder.

ScannerConfig.DecoderParams.CompositeAB - Class in com.symbol.emdk.barcode

The CompositeAB class provides access to parameters that are available for the CompositeAB decoder.

ScannerConfig.DecoderParams.CompositeC - Class in com.symbol.emdk.barcode

The CompositeC class provides access to parameters that are available for the CompositeC decoder.

ScannerConfig.DecoderParams.D2of5 - Class in com.symbol.emdk.barcode

The D2OF5 class provides access to parameters that are available for the D2OF5 decoder.

ScannerConfig.DecoderParams.DataMatrix - Class in com.symbol.emdk.barcode

The DataMatrix class provides access to parameters that are available for the DataMatrix decoder.

ScannerConfig.DecoderParams.DotCode - Class in com.symbol.emdk.barcode

The DotCode class provides access to parameters that are available for the DotCode decoder.

ScannerConfig.DecoderParams.DutchPostal - Class in com.symbol.emdk.barcode

The DutchPostal class provides access to parameters that are available for the DutchPostal decoder.

ScannerConfig.DecoderParams.Ean13 - Class in com.symbol.emdk.barcode

The Ean13 class provides access to parameters that are available for the Ean13 decoder.

ScannerConfig.DecoderParams.Ean8 - Class in com.symbol.emdk.barcode

The Ean8 class provides access to parameters that are available for the Ean8 decoder.

ScannerConfig.DecoderParams.FinnishPostal4S - Class in com.symbol.emdk.barcode

The FinnishPostal4S class provides access to parameters that are available for the FinnishPostal4S decoder.

ScannerConfig.DecoderParams.GridMatrix - Class in com.symbol.emdk.barcode

The GridMatrix class provides access to parameters that are available for the GridMatrix decoder.

ScannerConfig.DecoderParams.Gs1Databar - Class in com.symbol.emdk.barcode

The Gs1Databar class provides access to parameters that are available for the GS1 Databar decoder.

ScannerConfig.DecoderParams.Gs1DatabarExp - Class in com.symbol.emdk.barcode

The Gs1DatabarExp class provides access to parameters that are available for the GS1 Databar Exp decoder.

ScannerConfig.DecoderParams.Gs1DatabarLim - Class in com.symbol.emdk.barcode

The Gs1DatabarLim class provides access to parameters that are available for the GS1 Databar Lim decoder.

ScannerConfig.DecoderParams.Gs1Datamatrix - Class in com.symbol.emdk.barcode

The Gs1Datamatrix class provides access to parameters that are available for the Gs1Datamatrix decoder.

ScannerConfig.DecoderParams.Gs1QrCode - Class in com.symbol.emdk.barcode

The Gs1QrCode class provides access to parameters that are available for the Gs1QrCode decoder.

ScannerConfig.DecoderParams.HanXin - Class in com.symbol.emdk.barcode

The HanXin class provides access to parameters that are available for the HanXin decoder.

ScannerConfig.DecoderParams.I2of5 - Class in com.symbol.emdk.barcode

The I2of5 class provides access to parameters that are available for the I2of5 decoder.

ScannerConfig.DecoderParams.JapanesePostal - Class in com.symbol.emdk.barcode

The JapanesePostal class provides access to parameters that are available for the JapanesePostal decoder.

ScannerConfig.DecoderParams.Korean3of5 - Class in com.symbol.emdk.barcode

The Korean3of5 class provides access to parameters that are available for the Korean3of5 decoder.

ScannerConfig.DecoderParams.MailMark - Class in com.symbol.emdk.barcode

The MailMark class provides access to parameters that are available for the MailMark decoder.

ScannerConfig.DecoderParams.Matrix2of5 - Class in com.symbol.emdk.barcode

The Matrix2of5 class provides access to parameters that are available for the Matrix2of5 decoder.

ScannerConfig.DecoderParams.MaxiCode - Class in com.symbol.emdk.barcode

The MaxiCode class provides access to parameters that are available for the MaxiCode decoder.

ScannerConfig.DecoderParams.MICRE13B - Class in com.symbol.emdk.barcode

The MICRE13B class provides access to parameters that are available for the MICRE13B decoder.

ScannerConfig.DecoderParams.MicroPdf - Class in com.symbol.emdk.barcode

The MicroPdf class provides access to parameters that are available for the MicroPdf decoder.

ScannerConfig.DecoderParams.MicroQr - Class in com.symbol.emdk.barcode

The MicroQr class provides access to parameters that are available for the MicroQr decoder.

ScannerConfig.DecoderParams.Msi - Class in com.symbol.emdk.barcode

The Msi class provides access to parameters that are available for the Msi decoder.

ScannerConfig.DecoderParams.OcrA - Class in com.symbol.emdk.barcode

The OcrA class provides access to parameters that are available for the OcrA decoder.

ScannerConfig.DecoderParams.OcrB - Class in com.symbol.emdk.barcode

The OcrB class provides access to parameters that are available for the OcrB decoder.

ScannerConfig.DecoderParams.Pdf417 - Class in com.symbol.emdk.barcode

The Pdf417 class provides access to parameters that are available for the Pdf417 decoder.

ScannerConfig.DecoderParams.QrCode - Class in com.symbol.emdk.barcode

The QRCode class provides access to parameters that are available for the QRCode decoder.

ScannerConfig.DecoderParams.Signature - Class in com.symbol.emdk.barcode

The Signature class provides access to parameters that are available for the Signature decoder.

ScannerConfig.DecoderParams.Tlc39 - Class in com.symbol.emdk.barcode

The Tlc39 class provides access to parameters that are available for the Tlc39 decoder.

ScannerConfig.DecoderParams.TriOptic39 - Class in com.symbol.emdk.barcode

The TriOptic39 class provides access to parameters that are available for the TriOptic39 decoder.

ScannerConfig.DecoderParams.UkPostal - Class in com.symbol.emdk.barcode

The UkPostal class provides access to parameters that are available for the UkPostal decoder.

ScannerConfig.DecoderParams.Upca - Class in com.symbol.emdk.barcode

The Upca class provides access to parameters that are available for the Upca decoder.

ScannerConfig.DecoderParams.Upce0 - Class in com.symbol.emdk.barcode

The Upce0 class provides access to parameters that are available for the Upce0 decoder.

ScannerConfig.DecoderParams.Upce1 - Class in com.symbol.emdk.barcode

The Upce1 class provides access to parameters that are available for the Upce1 decoder.

ScannerConfig.DecoderParams.UpcEanParams - Class in com.symbol.emdk.barcode

The UPCEAN class provides access to parameters that are available for the UPC/EAN decoder.

ScannerConfig.DecoderParams.Us4State - Class in com.symbol.emdk.barcode

The US4State class provides access to parameters that are available for the US4State decoder.

ScannerConfig.DecoderParams.Us4StateFics - Class in com.symbol.emdk.barcode

The Us4StateFics class provides access to parameters that are available for the Us4StateFics decoder.

ScannerConfig.DecoderParams.USCurrency - Class in com.symbol.emdk.barcode

The USCurrency class provides access to parameters that are available for the USCurrency decoder.

ScannerConfig.DecoderParams.UsPlanet - Class in com.symbol.emdk.barcode

The UsPlanet class provides access to parameters that are available for the UsPlanet decoder.

ScannerConfig.DecoderParams.UsPostNet - Class in com.symbol.emdk.barcode

The UsPostNet class provides access to parameters that are available for the UsPostNet decoder.

ScannerConfig.DecoderParams.WebCode - Class in com.symbol.emdk.barcode

The WebCode class provides access to parameters that are available for the WebCode decoder.

ScannerConfig.DotCodeInverse - Enum in com.symbol.emdk.barcode

values for decoder parameter inverse

ScannerConfig.DotCodeMirror - Enum in com.symbol.emdk.barcode

values for decoder parameter Mirror

ScannerConfig.DpmIlluminationControl - Enum in com.symbol.emdk.barcode

Control the illumination for DPM barcode reading.

ScannerConfig.DpmModes - Enum in com.symbol.emdk.barcode

Select the DPM mode based on the type of barcode being scanned.

ScannerConfig.GridMatrixInverse - Enum in com.symbol.emdk.barcode

values for decoder parameter inverse

ScannerConfig.GridMatrixMirror - Enum in com.symbol.emdk.barcode

values for decoder parameter Mirror

ScannerConfig.GS1LimitedSecurityLevel - Enum in com.symbol.emdk.barcode

Security level addition of GS1 DataBar lim decoder.

ScannerConfig.HanXinInverse - Enum in com.symbol.emdk.barcode

This parameter allows the user to select decoding on inverse HanXin barcodes.

ScannerConfig.IlluminationMode - Enum in com.symbol.emdk.barcode

Enable/disable illumination depending on ambient light conditions.

ScannerConfig.Inverse1DMode - Enum in com.symbol.emdk.barcode

This parameter allows the user to select decoding on inverse 1D barcodes.

ScannerConfig.InverseOcr - Enum in com.symbol.emdk.barcode

Selects normal, inverse or both OCR scanning.

ScannerConfig.Isbt128ContactMode - Enum in com.symbol.emdk.barcode

Option for concatenating pairs of ISBT128 code types.

ScannerConfig.LcdMode - Enum in com.symbol.emdk.barcode

Enable or disable LCD mode (for Blockbuster imager devices only).

ScannerConfig.LinearSecurityLevel - Enum in com.symbol.emdk.barcode

Sets the number of times a barcode is read to confirm an accurate decode.

ScannerConfig.MultiBarcodeParams - Class in com.symbol.emdk.barcode

Deprecated.

This class has been deprecated. We recommend using the new ScannerConfig.NGSimulScanParams class in your new applications.

The MultiBarcodeParams class provides access to multi-barcode parameters that are available to configure.

When doing multi-barcode scanning consider the followings:

Barcodes can be of multiple label types. If the required number of barcodes (from 2-100, as set using the barcodeCount parameter) is not in view of the scanner, the scanner will not decode any data.
If the scanner's field of view contains a number of barcodes greater than the value set by barcodeCount, the scanner will randomly decode any barcode(s) until the count is reached. For example, if the count is set to two and eight barcodes are in the field of view, the scanner returns data for the first two barcodes it sees, and returns the data in random order.
There is no guarantee that the order of returned data will be the same on any two scans; order of individual barcode data can vary with each scan.
In multi-barcode scanning mode, when a picklist reader parameter is set to a value other than “Disabled," the user is expected to move the crosshair to the specified number of barcodes to be scanned. Set this value (from 2-100) using the barcodeCount parameter. Data is returned only after the specified number of barcodes is read.

ScannerConfig.NGSimulScanMode - Enum in com.symbol.emdk.barcode

Available NGSimulScan scanning modes.

ScannerConfig.NGSimulScanParams - Class in com.symbol.emdk.barcode

The NGSimulScanParams class provides access to NGSimulScanParams parameters that are available to configure.

ScannerConfig.NGSimulScanParams.MultiBarcodeParams - Class in com.symbol.emdk.barcode

The MultiBarcodeParams class provides access to multi-barcode parameters that are available to configure.

ScannerConfig.OcrAVariant - Enum in com.symbol.emdk.barcode

Selects different OCR-A variants.

ScannerConfig.OcrBVariant - Enum in com.symbol.emdk.barcode

Selects different OCR-B variants.

ScannerConfig.OcrCheckDigitValidation - Enum in com.symbol.emdk.barcode

Selects Check Digit Validation Scheme.

ScannerConfig.OcrLines - Enum in com.symbol.emdk.barcode

Select number of lines to scan during OCR reading.

ScannerConfig.OcrOrientation - Enum in com.symbol.emdk.barcode

Specify the orientation of an OCR String to be read.

ScannerConfig.OcrParams - Class in com.symbol.emdk.barcode

The OcrParams class provides access to OCR parameters that are available to configure.

ScannerConfig.OneDQuietZoneLevel - Enum in com.symbol.emdk.barcode

Describes the effort at which the decoder will attempt to decode margin-less barcodes.

ScannerConfig.PairAfterScannerReboot - Enum in com.symbol.emdk.barcode

Enable/disable automatic reconnection after scanner reboot.

ScannerConfig.PickList - Enum in com.symbol.emdk.barcode

Deprecated.

This enum is deprecated and the recommendation is to use new enum ScannerConfig.PicklistEx. Allows the imager to decode only the barcode that is directly under the cross-hair/reticle (+) part of the pattern. This feature is useful in applications where multiple barcodes may appear in the field of view during a decode session and only one of them is targeted for decode.

Note: Selecting the picklist may adversely affect overall decoding performance.

 
 	Example Usage:
 	PickList.DISABLED;

ScannerConfig.PicklistEx - Enum in com.symbol.emdk.barcode

Allows the imager or camera to decode only the barcode that is directly under the cross-hair (+)/center of the reticle part of the pattern.

ScannerConfig.PoorQualityDecodeEffortLevel - Enum in com.symbol.emdk.barcode

Describes the selection of enhancement modes for decoding barcodes of poor or degraded quality.

ScannerConfig.PowerMode - Enum in com.symbol.emdk.barcode

Set laser scanner power mode

ScannerConfig.Preamble - Enum in com.symbol.emdk.barcode

Controls the preamble applied to the barcode Preamble characters are part of the UPC symbol consisting of Country Code and System Character.

ScannerConfig.PresentationModeSensitivity - Enum in com.symbol.emdk.barcode

Controls the sensitivity of scene detection in presentation mode.

ScannerConfig.ReaderParams - Class in com.symbol.emdk.barcode

The ReaderParams class holds the parameters for a scanner.

ScannerConfig.ReaderParams.ReaderSpecific - Class in com.symbol.emdk.barcode

ReaderSpecific class provides access to the reader specific parameters.

ScannerConfig.ReaderParams.ReaderSpecific.CameraSpecific - Class in com.symbol.emdk.barcode

CameraSpecific class provides access to the camera scanner specific parameters.

ScannerConfig.ReaderParams.ReaderSpecific.ContinuousRead - Class in com.symbol.emdk.barcode

Deprecated.

We recommend using the new fields introduced in the scanner specific class in your new applications.

ContinuousRead class provides access to continuous scanning related parameters.

ScannerConfig.ReaderParams.ReaderSpecific.ImagerSpecific - Class in com.symbol.emdk.barcode

ImagerSpecific provides access to the imager specific parameters.

ScannerConfig.ReaderParams.ReaderSpecific.ImagerSpecific.PresentationModeParams - Class in com.symbol.emdk.barcode

PresentationModeParams provides access to the presentation mode parameters.

ScannerConfig.ReaderParams.ReaderSpecific.LaserSpecific - Class in com.symbol.emdk.barcode

LaserSpecific class provides access to the laser scanner specific parameters.

ScannerConfig.ScanMode - Enum in com.symbol.emdk.barcode

Deprecated.

This enum has been deprecated. We recommend using the new enum ScannerConfig.NGSimulScanMode in your new applications.

Available scanning modes. This allows to select one type at a time.

 
 	Example Usage:
 	ScanMode.SINGLE_BARCODE;

ScannerConfig.ScanParams - Class in com.symbol.emdk.barcode

The ScanParams class provides access to scanning parameters that are available for all decoders.

ScannerConfig.SceneDetectionQualifier - Enum in com.symbol.emdk.barcode

Qualifier for starting scene detection when presentation is selected as Aim Type.

ScannerConfig.SecurityLevel - Enum in com.symbol.emdk.barcode

The scanner offers four levels of decode security for UPC/EAN barcodes.

ScannerConfig.SignatureImageBitsPerPixel - Enum in com.symbol.emdk.barcode

Selection of bits per pixel for signature image

ScannerConfig.SignatureImageFormat - Enum in com.symbol.emdk.barcode

Selection of format for signature image.

ScannerConfig.SkipOnUnSupported - Enum in com.symbol.emdk.barcode

Describes what to do when the scanner config fields are not supported for the specified scanner.

ScannerConfig.SupplementalMode - Enum in com.symbol.emdk.barcode

Supplemental modes

ScannerConfig.UccLinkMode - Enum in com.symbol.emdk.barcode

Describes the UCC link mode state.

ScannerConfig.UdiParams - Class in com.symbol.emdk.barcode

Deprecated.

This feature is supported only on devices prior to those running Android 10 Q.

The UdiParams class provides access to UDI parameters that are available to configure.

ScannerConfig.VerifyCheckDigit - Enum in com.symbol.emdk.barcode

Check the integrity of all Code 11 symbols to verify that the data complies with the specified check digit algorithm.

ScannerConfig.ViewFinderMode - Enum in com.symbol.emdk.barcode

Configures the Viewfinder modes supported for camera scanning.

ScannerException - Exception in com.symbol.emdk.barcode

The methods of barcode scanning object throw a ScannerException when an error occurs.

ScannerInfo - Class in com.symbol.emdk.barcode

ScannerInfo provides information of the scanner device.

ScannerInfo.ConnectionType - Enum in com.symbol.emdk.barcode

List of supported scanner connection types.

ScannerInfo.DecoderType - Enum in com.symbol.emdk.barcode

This lists all the barcode types supported by scanners

ScannerInfo.DeviceType - Enum in com.symbol.emdk.barcode

List of supported scanner device types.

ScannerResults - Enum in com.symbol.emdk.barcode

Defines all the error codes the barcode scanning API returns.

scannerSelection - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode

Deprecated.

Gets and Sets scanner selection ProfileConfig.DEVICETYPES.

scanParams - Variable in class com.symbol.emdk.barcode.ScannerConfig

The ScanParams property provides access to scanning parameters that are available for all decoders.

scanParams - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode

Deprecated.

Gets and Sets ScanParams configuration object ProfileConfig.DataCapture.Barcode.scanParams.

scanTimeout - Variable in class com.symbol.emdk.scanandpair.ScanAndPairConfig.ScanInfo

Scan timeout in milliseconds.

sceneDetectionQualifier - Variable in class com.symbol.emdk.barcode.ScannerConfig.ReaderParams.ReaderSpecific.ImagerSpecific

Activate the Presentation mode of scanning based on a Scene Detection Qualifier.

security_level - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.DecoderParams.Code128

Deprecated.

The scanner of fers four levels of decode security for Code 128 bar codes.

security_level - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.DecoderParams.Code39

Deprecated.

Options: Security level 0 , Security Level 1 , Security Level 2 and Security Level 3 (default - Security level 1).

security_level - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.DecoderParams.Interleaved_2of5

Deprecated.

Specifies security level Use enum ProfileConfig.SECURITY_LEVEL.

security_level - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.UpcEanParams

Deprecated.

The scanner of fers four levels of decode security for UPC/EAN bar codes.

securityLevel - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams.Code128

The scanner of fers four levels of decode security for Code 128 barcodes.

securityLevel - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams.Code39

Options: Security level 0 , Security Level 1 , Security Level 2 and Security Level 3.

securityLevel - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams.Gs1DatabarLim

Sets the four levels of decode security for GS1 DataBar Limited barcodes.

securityLevel - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams.I2of5

Specifies security level Use enum ScannerConfig.SecurityLevel.

securityLevel - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams.UpcEanParams

The scanner of fers four levels of decode security for UPC/EAN barcodes.

sensitivity - Variable in class com.symbol.emdk.barcode.ScannerConfig.ReaderParams.ReaderSpecific.ImagerSpecific.PresentationModeParams

This parameter allows the user to set the value for sensitivity during the scanning session.

SERIAL_NUMBER - Static variable in class com.symbol.emdk.barcode.TokenizedData.Keys

SerialComm - Class in com.symbol.emdk.serialcomm

This is the primary object to access the serial communication feature to communicate with remote device wither via USB/Serial.

SerialComm.ControlSignal - Enum in com.symbol.emdk.serialcomm

List of control signals

SerialCommConfig - Class in com.symbol.emdk.serialcomm

The SerialCommConfig class provides access to configure the serial port settings.

SerialCommConfig.BaudRates - Class in com.symbol.emdk.serialcomm

Possible baud rate constants defined.

SerialCommConfig.DataBits - Enum in com.symbol.emdk.serialcomm

Pre-defined constants for number of data bits in a serial frame in SerialComm object.

SerialCommConfig.FlowControlMode - Enum in com.symbol.emdk.serialcomm

Pre-defined constants to specify flow control.

SerialCommConfig.ParityBits - Enum in com.symbol.emdk.serialcomm

Specifies the parity bits for a SerialComm object.

SerialCommConfig.StopBits - Enum in com.symbol.emdk.serialcomm

Specifies the number of stop bits used on the SerialComm object.

SerialCommException - Exception in com.symbol.emdk.serialcomm

The methods of serial communication object throw a SerialCommException when an error occurs.

SerialCommManager - Class in com.symbol.emdk.serialcomm

This is the primary object to access the serial communication feature to communicate with remote device wither via USB/Serial.

SerialCommResults - Enum in com.symbol.emdk.serialcomm

Serial Communication error codes and its details.

SerialPortInfo - Class in com.symbol.emdk.serialcomm

Provides information about the serial port used for communication.

setConfig(ScannerConfig) - Method in class com.symbol.emdk.barcode.Scanner

Changes the settings for this scanner device.

setConfig(SerialCommConfig) - Method in class com.symbol.emdk.serialcomm.SerialComm

Sets the serial comm settings for the currently choosen port.

setConfig(SimulScanConfig) - Method in class com.symbol.emdk.simulscan.SimulScanReader

Deprecated.

Changes the settings for this reader device.

setFastChargingState(boolean) - Method in class com.symbol.emdk.personalshopper.CradleConfig

Sets fast charging state of cradle.

setInterfaceConfig(InterfaceConfig) - Method in class com.symbol.emdk.barcode.Scanner

setLocation(CradleConfig.CradleLocation) - Method in class com.symbol.emdk.personalshopper.CradleConfig

Sets the cradle location.

setParams(Bundle) - Method in class com.symbol.emdk.barcode.Scanner

Sets the param names and values After calling enable(), user must wait for IDLE status before calling setParams() API.

setSignalState(SerialComm.ControlSignal, boolean) - Method in class com.symbol.emdk.serialcomm.SerialComm

This method allows the application to set the status of control signal.

setSmartCardPPS(byte, byte) - Method in class com.symbol.emdk.sam.SAM

Sets the SmartCard PPS (Protocol and Parameters Selection).

signature - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams

The Signature class provides access to parameters that are available for the Signature decoder.

signature - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.Decoders

Deprecated.

Sets the Enabled State of Decoder Signature.

SimulScanConfig - Class in com.symbol.emdk.simulscan

Deprecated.

This feature is supported only on devices prior to those running Android 10 Q.

The SimulScanConfig class provides access to reader configuration settings.

 
 	Example Usage:
 SimulScanMultiTemplate template1 = new SimulScanMultiTemplate(fileUri);//fileUri points to the template
 SimulScanReader reader = simulscanManager.getDevice(template1.deviceIdentifier);
 reader.enable(); 
 SimulScanConfig config = reader.getConfig(); // Reader object must be enabled before calling getConfig
 config.audioFeedback = false;
 reader.setConfig(config); // Reader object must be enabled and not scanning when calling setConfig

SimulScanData - Class in com.symbol.emdk.simulscan

Deprecated.

This feature is supported only on devices prior to those running Android 10 Q.

The SimulScanData object gives scanning result

 
 	Example Usage:
	public void onSimulScanData(SimulScanData simulscanData) {

		Date timestamp = new Date(simulscanData.getTimestamp());
		List<SimulScanElement> simulscanDataElements = simulscanData.getElements();
		List<SimulScanRegion> simulscanDataRegions = new ArrayList<SimulScanRegion>(); 
		for (SimulScanElement curElement : simulscanDataElements)
		{
			if (curElement instanceof SimulScanRegion) {
				Log.d(TAG, ((SimulScanRegion) curElement).getName());
			} else if (curElement instanceof SimulScanGroup) {	
				List<SimulScanRegion> regionsInGroup = ((SimulScanGroup)curElement).getRegions();
				for (SimulScanRegion curRegion : regionsInGroup){
					Log.d(TAG, "Group:"+ ((SimulScanGroup)curElement).getName() +"Region:"+ ((SimulScanRegion) curRegion).getName());
				}
			}
		}
 }

SimulScanData() - Constructor for class com.symbol.emdk.simulscan.SimulScanData

Deprecated.

SimulScanElement - Class in com.symbol.emdk.simulscan

Deprecated.

This feature is supported only on devices prior to those running Android 10 Q.

The SimulScanElement abstract class represents a processed SimulScanTemplateElement.

SimulScanException - Exception in com.symbol.emdk.simulscan

Deprecated.

This feature is supported only on devices prior to those running Android 10 Q.

The SimulScan APIs throw a SimulScanException when an error occurs. The error could be due to:

Incorrect use of APIs
Or in case of an unexpected error

SimulScanGroup - Class in com.symbol.emdk.simulscan

Deprecated.

This feature is supported only on devices prior to those running Android 10 Q.

The SimulScanGroup class represents a processed SimulScanTemplateGroup.

SimulScanManager - Class in com.symbol.emdk.simulscan

Deprecated.

This feature is supported only on devices prior to those running Android 10 Q.

This is the primary object to access the SimulScan feature.

 
 	public class MainActivity extends Activity implements EMDKListener,
		DataListerner, StatusListerner {

	  	protected void onCreate(Bundle savedInstanceState) {
 			//..
   		 EMDKResults results = EMDKManager.getEMDKManager(getApplicationContext(), this);
		}

		public void onOpened(EMDKManager emdkManager) {
			this.emdkManager = emdkManager;
	 	}
	 	
	    //...
	    simulScanManager = (SimulScanManager)this.emdkManager.getInstance(FEATURE_TYPE.SIMULSCAN);
      //...
      List<SimulScanReaderInfo> readerInfoList = simulScanManager.getSupportedDevicesInfo();
      SimulScanReader reader = simulScanManager.getDevice(readerInfoList.get(0));
      reader.addDataListener(this);
      reader.addStatusListener(this);
      reader.enable();
      // set template before calling read
      reader.read();
  
      //...
      reader.cancelRead();
  
      //...
      reader.disable();
  
      //..
  
      EMDKManager.release(FEATURE_TYPE.SIMULSCAN);
  
	    }

When using SimulScan API consider the following:

The SimulScan API currently supports CAMERA, IMAGER and DEFAULT reader device types. Specifying CAMERA will use the Camera and specifying IMAGER will use the Imager. Specifying DEFAULT will use the input source already defined in the template but this option is currently not working as expected.

SimulScanManager.DeviceIdentifier - Enum in com.symbol.emdk.simulscan

Deprecated.

This feature is supported only on devices prior to those running Android 10 Q.

Defines scanner device identifier.

SimulScanMultiTemplate - Class in com.symbol.emdk.simulscan

Deprecated.

This feature is supported only on devices prior to those running Android 10 Q.

The SimulScanMultiTemplate class contains an entire parsed XML template file. It may consist of many individual Template.

SimulScanMultiTemplate(SimulScanManager, String) - Constructor for class com.symbol.emdk.simulscan.SimulScanMultiTemplate

Deprecated.

Create SimulScanMultiTemplate object from XML string

SimulScanMultiTemplate(SimulScanManager, Uri) - Constructor for class com.symbol.emdk.simulscan.SimulScanMultiTemplate

Deprecated.

Create SimulScanMultiTemplate object from URI to template XML

SimulScanReader - Class in com.symbol.emdk.simulscan

Deprecated.

This feature is supported only on devices prior to those running Android 10 Q.

SimulScanReader class will represent and provides access to the physical Reader device.

 
 	Example Usage:
 	List<SimulScanReaderInfo> readerInfoList = simulscanManager.getSupportedDevicesInfo();
 	SimulScanReader reader = simulscanManager.getDevice(readerInfoList.get(0));
 	reader.addDataListener(callbackObj);
 	reader.addStatusListener(callbackObj);
 	reader.enable();
 	// Set template before calling read
 	reader.read();
 	reader.cancelRead();
 	reader.disable();

When using SimulScanReader consider the following:

Calling SimulScanReader.read() with any unlicensed features in the selected template, an ERROR state is returned with extended status as "UNLICENSED_FEATURE" for each unlicensed feature in the template. Use SimulScanStatusData.getStatusDescription() to view the name of the unlicensed feature(s).

SimulScanReader.DataListerner - Interface in com.symbol.emdk.simulscan

Deprecated.

This feature is supported only on devices prior to those running Android 10 Q.

An interface for notifying client applications when the scan data is available.

 
 	Example Usage:
  public class MainActivity extends Activity implements DataListerner
  .. .. ..

SimulScanReader.StatusListerner - Interface in com.symbol.emdk.simulscan

Deprecated.

This feature is supported only on devices prior to those running Android 10 Q.

An interface for notifying client applications to notify scan events.

 
 	Example Usage:
  public class MainActivity extends Activity implements StatusListerner
  .. .. ..

SimulScanReaderInfo - Class in com.symbol.emdk.simulscan

Deprecated.

This feature is supported only on devices prior to those running Android 10 Q.

SimulScanReaderInfo provides information of the reader device.

 
 	Example Usage:
 	readerInfo.getFriendlyName();

SimulScanReaderInfo.DeviceType - Enum in com.symbol.emdk.simulscan

Deprecated.

This feature is supported only on devices prior to those running Android 10 Q.

List of supported scanner device type.

 
 	Example Usage:
 	SimulScanDeviceType.CAMERA;

SimulScanRegion - Class in com.symbol.emdk.simulscan

Deprecated.

This feature is supported only on devices prior to those running Android 10 Q.

The SimulScanRegion class represents a processed SimulScanTemplateRegion.

SimulScanResults - Enum in com.symbol.emdk.simulscan

Deprecated.

This feature is supported only on devices prior to those running Android 10 Q.

Defines all the error codes the SimulScan API returns.

SimulScanStatusData - Class in com.symbol.emdk.simulscan

Deprecated.

This feature is supported only on devices prior to those running Android 10 Q.

SimulScanStatusData class provides access to reader status.

 
 	Example Usage:
 	SimulScanStatusData.getState();

SimulScanStatusData() - Constructor for class com.symbol.emdk.simulscan.SimulScanStatusData

Deprecated.

SimulScanStatusData.ExtendedStatus - Enum in com.symbol.emdk.simulscan

Deprecated.

This feature is supported only on devices prior to those running Android 10 Q.

Available reader extended statuses.

SimulScanStatusData.SimulScanStatus - Enum in com.symbol.emdk.simulscan

Deprecated.

This feature is supported only on devices prior to those running Android 10 Q.

Available reader statuses.

SimulScanTemplate - Class in com.symbol.emdk.simulscan

Deprecated.

This feature is supported only on devices prior to those running Android 10 Q.

The Template class represents the XML template passed into the SimulScanEngine. All of the recognizable tags and attributes are placed into this class.

SimulScanTemplateElement - Class in com.symbol.emdk.simulscan

Deprecated.

This feature is supported only on devices prior to those running Android 10 Q.

The TemplateElement class represents elements nested directly under the tag in an XML template file

SimulScanTemplateGroup - Class in com.symbol.emdk.simulscan

Deprecated.

This feature is supported only on devices prior to those running Android 10 Q.

The SimulScanTemplateGroup class is a grouping of multiple SimulScanTemplateRegion items.

SimulScanTemplateRegion - Class in com.symbol.emdk.simulscan

Deprecated.

This feature is supported only on devices prior to those running Android 10 Q.

The SimulScanTemplateRegion class represents a particular region in a Template.

skipOnUnsupported - Variable in class com.symbol.emdk.barcode.ScannerConfig

This flag to tells whether to skip the unsupported parameter/values and continue or stop setting the configuration.

smoothEffect - Variable in class com.symbol.emdk.personalshopper.CradleLedFlashInfo

Enable or disable the smooth effect of the LED blinking

statusCode - Variable in class com.symbol.emdk.EMDKResults

Gets status code result from process profile as enum value of type EMDKResults.STATUS_CODE.

StatusData - Class in com.symbol.emdk.barcode

StatusData class provides access to scanner status.

StatusData - Class in com.symbol.emdk.scanandpair

This class provides the Status detail of ScanAndPair.

StatusData() - Constructor for class com.symbol.emdk.scanandpair.StatusData

StatusData.ScanAndPairStates - Enum in com.symbol.emdk.scanandpair

Defines the different states of the scan and pir/unpair.

StatusData.ScannerStates - Enum in com.symbol.emdk.barcode

Defines the different states of the barcode scanner.

stopBit - Variable in class com.symbol.emdk.serialcomm.SerialCommConfig

Specifies the number of stop bits to be used.

subErrorCodes - Variable in class com.symbol.emdk.EMDKError

Gets sub error code(s) from getLastError() as enum value of type EMDKSubErrorCode.

subset - Variable in class com.symbol.emdk.barcode.ScannerConfig.OcrParams

A custom group of characters in place of a preset font variant

subType - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams.WebCode

Webcode sub type enabled

supplemental2 - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams.UpcEanParams

Flag to enable length 2 supplementals.

supplemental2 - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.UpcEanParams

Deprecated.

Flag to enable length 2 supplementals.

supplemental5 - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams.UpcEanParams

Flag to enable length 5 supplementals.

supplemental5 - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.UpcEanParams

Deprecated.

Flag to enable length 5 supplementals.

supplemental_mode - Variable in class com.symbol.emdk.ProfileConfig.DataCapture.Barcode.UpcEanParams

Deprecated.

The supplemental mode.

supplementalMode - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams.UpcEanParams

The supplemental mode.

supplementalRetries - Variable in class com.symbol.emdk.barcode.ScannerConfig.DecoderParams.UpcEanParams

Retry count for auto-discriminating for supplementals.

A B C D E F G H I J K L M N O P Q R S T U V W Z