Scan and Pair

Shows how the Scan and Pair API is used to pair Bluetooth devices programmatically.

Download Source

Product

EMDK For Android - 8.0

Devices

All supported devices

Overview

This sample app shows how the Scan and Pair API is used to programmatically pair two Bluetooth devices.

Requirements

  • Android Studio on a Mac or Windows PC with Android API 22 (or higher) installed
  • Two (2) Zebra Android devices, at least one of which is among the supported devices
  • A barcode that contains the Bluetooth MAC address of the second Zebra device (to pair with)

Using Sample App

NOTE: The appearance of sample app screens can vary by sample app version, Android version and screen size.

1. Download, build and install the sample app. For help, please see the Sample App Set-up Guide.

2. When the application starts, it should look similar to the image below. Confirm that the "Always Scan" and "Hard Trigger" check boxes are checked and that the "ScanData Type" is set to "MAC_ADDRESS."

image

3. Press the "Pair" button. The status label (in the lower section of the app) indicates that the Scan and Pair process has started and prompts the user to press the hard scan trigger.

image

4. Place the pairing barcode in view of the device's scan window and press the hard scan trigger. The app retrieves the MAC address from the barcode, places it in the Bluetooth Address field and initiates the pairing and connection process. Press Pair in the pairing request dialog (as seen below) to complete the pairing process.

image

Pairing has completed successfully when the status label displays "Bluetooth device is paired successfully."