SimulScan API programmer's guide

EMDK For Android 6.10

Introduction

SimulScan is an end-to-end data capture solution for extracting critical data from documents. A differentiating data capture value-add, it involves capturing fields of interest in a given document and converting it into data that an end-user application can use immediately at the point of transaction.

SimulScan customers benefit from:

  • Productivity gain by decoding multiple bar codes read with a single trigger pull
  • Automated data entry with character recognition [OCR]
  • Simplified workflow exceptions with checked mark recognition [OMR] and Signature presence detection

Customers can interactively capture documents and obtain meaningful data present in the document. Barcodes are identified and decoded; strings are recognized from fields containing text; images are refined from fields containing pictures and so forth. Based on a "template", an image of the entire document is processed by various engines to extract the relevant data.

Determining device support

  • Supported devices : TC55, TC75
  • SimulScan v1.8
  • EMDK v3.1.x

Our licensing procedure

  • Obtain a device license from https://softwarelicensing.zebra.com/

    • Further information on the licensing process can be found here.

  • Copy the received XML to the device

  • Setup the license on the device (TC55 2.42 and later devices)

    • Go to Settings -> About phone -> Legal information -> Symbol licenses (this will only be available on a 2.42+ BSP device)
    • Click on the Android menu button -> Install license
    • Navigate to the XML you copied
    • Once this is complete, the License Information should be updated to reflect the fact that a license is installed

Getting started

Initialize EMDK manager

Follow the “Basic Scanning Tutorial using Barcode API” to set up your project for the EMDK.

Note: It is recommended to release EMDKManager in onDestroy() and onClose() (Service disconnected unexpectedly)

Get SimulScanManager


SimulScanManager simulscanManager = (SimulScanManager) emdkManager.getInstance(FEATURE_TYPE.SimulScan);

Note: emdkManager.release(FEATURE_TYPE.SimulScan) must be called before switching to another EMDK or DataWedge application

Get SimulScanReader

There are two options here:

  1. Use the SimulScanManager.getDevice(SimulScanDeviceIdentifier deviceIdentifier) API

    The valid SimulScanDeviceIdentifiers are:

    • INTERNAL_CAMERA1 : Use the internal camera
    • INTERNAL_IMAGER1 : Use the internal imager
    • TEMPLATE_DRIVEN : Use the device defined in the template

    If the SimulScanDeviceIdentifier is not valid in the target platform an exception will be thrown from the call to “getDevice”

    
    try {
        simulscanManager.getDevice(SimulScanDeviceIdentifier.INTERNAL_CAMERA1);
    } catch (SimulScanException e) {
        e.printStackTrace();
    }
    
  2. Use the SimulScanManager.getSupportedDevicesInfo() first and then pass one the received SimulScanReaderInfo objects to SimulScanManager.getDevice(SimulScanReaderInfo simulscanReaderInfo)

    
    List<SimulScanReaderInfo> readerInfoList = simulscanManager.getSupportedDevicesInfo();
    try {
        simulscanManager.getDevice(readerInfoList.get(0));
    } catch (SimulScanException e) {
        e.printStackTrace();
    }
    

Using SimulScanReader

First register data and status listener to the SimulScanReader object. The listeners must implement the SimulScanDataEventListerner & SimulScanStatusEventListerne interfaces.


public class SimulScanTestApp implements SimulScanStatusEventListerner, SimulScanDataEventListerner{
    @Override
    public void onSimulScanData(SimulScanData form) {
        // TODO Auto-generated method stub
    }
    @Override
    public void onSimulScanStatus(SimulScanStatusData status) {
        // TODO Auto-generated method stub
    }
}

....

SimulScanTestApp m_ SimulScanTestApp = new SimulScanTestApp();
try {
    selectedSimulScanReader.addSimulScanStatusListener(m_ SimulScanTestApp);    selectedSimulScanReader.addSimulScanDataListener(m_ SimulScanTestApp);
} catch (SimulScanException e) {
    e.printStackTrace();
}

SimulScanReader.enable() enables the reader hardware. This method does not make the reader to scan. Basically it will make the scanner device available for your application. If another reader is already enabled by you or other applications, this will throw a SimulScanException. You must call disable() when you are done, otherwise all readers will remain locked and will be unavailable for this and any other application that uses SimulScan.


try {
    selectedSimulScanReader.enable();
} catch (SimulScanException e) {
    e.printStackTrace();
}

Once the barcode is enabled, we will must set a valid template for the reader. The template and other configurations can be changed via the SimulScanReader’s SimulScanConfig. The templates can be loaded via the SimulScanMultiTemplate class.


SimulScanConfig config = selectedSimulScanReader.getConfig();

SimulScanMultiTemplate multiTemplate = new SimulScanMultiTemplate(Uri.fromFile("/file/path"));
if(multiTemplate != null)
    config.multiTemplate = multiTemplate;
//optionally set other configs
config.enableAutoCapture = true;
 config.enableResultConfirmation = true;
 config.processingTimeout = 10000;

// Apply config
 selectedSimulScanReader.setConfig(config);

To create SimulScan templates use the “Template Builder" graphical tool web tool at https://simulscan.zebra.com/. Template builder help can be found there at https://simulscan.zebra.com/Content/Help/WebHelp/index.htm. After creating the templates, copy the template XML to your device and use the “new SimulScanMultiTemplate()” API to open the created template.

After setting a template we can start a scan using the SimulScanReader.read() API. The read request can be canceled by issuing a cancelRead(). If a read() is submitted while another read is pending, the method call will fail. It is recommended to check whether a read is pending by calling isReadPending() before submitting a read().


try {
    if(!selectedSimulScanReader.isEnabled())
        selectedSimulScanReader.enable();
} catch (SimulScanException e) {
    e.printStackTrace();
}

When we are done with scanning, we must release the scanner hardware resources for other applications to use. So it is recommended to override onStop() method disable any enabled SimulScanReaders.


@Override
public void onStop(){
    if(selectedSimulScanReader.isReadPending()){
        try {
            selectedSimulScanReader.cancelRead();
        } catch (SimulScanException e) {
            e.printStackTrace();
        }
    }
    try {
        if(selectedSimulScanReader.isEnabled()){
            selectedSimulScanReader.disable();
        }
    } catch (SimulScanException e) {
        e.printStackTrace();
    }
    super.onStop();
}

Download templates from Template Builder

The SimulScanReader.fetchTemplate(UserName, Password) method provides a means to download Templates from SimulScan Template Builder.

SimulScan Template Builder can be accessed via https://simulscan.zebra.com/. To access Template Builder, you will need a user name and a password. The same user name and password must be provided as parameters to SimulScanReader's fetchTemplate method.

When the fetching is complete, onSimulScanStatus will be called with the status of FETCH_TEMPLATE_COMPLETED.

If there are errors when calling SimulScanReader's fetchTemplate method. onSimulScanStatus will be called with one of the following status codes:

  • FETCH_TEMPLATE_LOGIN_ERROR
  • FETCH_TEMPLATE_NETWORK_ERROR
  • FETCH_TEMPLATE_CANCELLED

SimulScanReader must be enabled before calling fetchTemplate().

fetchTemplate() API call will fail if a read() is in progress, and read() API call is not allowed while a fetchTemplate() is in progress.

Downloaded templates will be saved to the default template directory of the device ( see SimulScan Default Templates below)

SimulScanConfig in detail

The SimulScanConfig APIs can be used to set various SimulScan configuration parameters for each SimulScan reader. To get the current configuration of a SimulScanReader via a SimulScanConfig object, use the SimulScanReader.getConfig() API. Use the SimulScanConfig object’s public parameters to change the configuration and then call SimulScanReader.setConfig(SimulScanConfig config) to apply the changes.

The valid configuration parameters are as follows:

  • enableAutoCapture : If true, form will be captured automatically when detected.

  • enableDebugMode : If enabled, allows a session to write form capture, region images, region values, and other data to storage.

  • enableFeedbackAudio : Turn on/off audio feedback.

  • enableHaptic : Turn on/off haptic feedback.

  • enableLED : Turn on/off LED feedback.

  • enableResultConfirmation : If enabled, shows a UI confirmation with results in SimulScanView before sending results back to application.

  • identificationTimeout : Amount of time in milliseconds to wait before timing out identification.

  • multiTemplate : The SimulScanMultiTemplate to scan

  • processingTimeout : Amount of time in milliseconds to wait before timing out processing

    :::java SimulScanConfig config = selectedSimulScanReader.getConfig();

    config.enableAutoCapture = true; config.enableResultConfirmation = true; config.processingTimeout = 10000;

    // Apply config selectedSimulScanReader.setConfig(config);

Handling onSimulScanStatus events

EMDK will generate onSimulSCanStatus events when there is a change in state in a particular SimulScanReader. Use the SimulScanStatusData object in the onSimulScanScanStatus callback method to get information on the status.


@Override
public void onSimulScanStatus(SimulScanStatusData statusData) {

    // Print the friendly name of the Reader that originated the status update
    Log.v(TAG, "Reader: "+ statusData.getFriendlyName());
    // Handle the various state changes
    switch (statusData.getState()) {
        case DISABLED:
            Log.v(TAG, "onDisabled");
            break;
        case ENABLED:
            Log.v(TAG, "onEnabled");
            break;
        case SCANNING:
            Log.v(TAG, "Scanning");
            break;
        case IDLE:
            Log.v(TAG, "Idle");
            switch(statusData.getExtendedState())
            {
                case PROCESSING_TIMEOUT:
                    Log.v(TAG, "Timeout occurred during processing");
                    break;
                case IDENTIFICATION_TIMEOUT:
                    Log.v(TAG, "Timeout occurred during identification");
                    break;
                case CANCELLED:
                    Log.v(TAG, "Cancelled scanning");
                    break;
                case FORM_DECODED:
                    Log.v(TAG, "Form decoded successfully");
                    break;
            }
            break;
        case FETCH_TEMPLATE_COMPLETED:
            Log.v(TAG,"Fetching templates completed");
            break;
        case ERROR:
            switch(statusData.getExtendedState())
            {
                case FETCH_TEMPLATE_LOGIN_ERROR:
                    Log.e(TAG, "Fetch template login error");
                    break;
                case  FETCH_TEMPLATE_NETWORK_ERROR:
                    Log.e(TAG, "Network error occurred while trying to fetch templates");
                    break;
                case  FETCH_TEMPLATE_CANCELLED:
                    Log.e(TAG, "User cancelled fetch template");
                    break;
                case UNLICENSED_FEATURE:
                    Log.e(TAG, "Unlicensed Feature detected: " + statusData.getStatusDescription());
                    break;
                case UNDEFINED:
                default:
                    Log.e(TAG, "Error: " + statusData.getStatusDescription());
                    break;
            }
            break;
        case UNKNOWN:
        default:
            break;
    }

    }

Use the SimulScanStatusData’s getFriendlyName() API to get the friendly name of the SimulScanReader that has generated the Status event and use the getState() API to get the SimulScanStatus object with the status change information.

The list of valid states are as follows:

  • DISABLED : Disabled called successfully on reader
  • ENABLED : Enabled reader successfully
  • ERROR : Error occurred
  • IDLE : Finished scanning
  • SCANNING : Successfully started scanning
  • FETCH_TEMPLATE_COMPLETED: Fetch template completed
  • UNKNOWN : Unknown status

Use the SimulScanStatusData’s getExtendedState() method to get extended status information of IDLE and ERROR state.

A list of valid extended states are as follows:

  • PROCESSING_TIMEOUT : Timeout occurred during processing
  • IDENTIFICATION_TIMEOUT : Timeout occurred during identification
  • CANCELLED: Cancelled scanning
  • UNLICENSED_FEATURE: Unlicensed feature detected. Use SimulScanStatusData’s getStatusDescription() method to identify the unlicensed feature
  • FORM_DECODED: Form decoded successfully
  • FETCH_TEMPLATE_LOGIN_ERROR: Fetch template login error
  • FETCH_TEMPLATE_NETWORK_ERROR: Network error occurred while trying to fetch templates
  • FETCH_TEMPLATE_CANCELLED: User cancelled fetch template
  • UNDEFINED: No extended state

Note: If you plan to do any significant processing during the onSimulScanStatus callback, you should do so in a background thread so that it does not block the UI thread.

Handling onSimulScanData events

EMDK will generate onSimulScanData events after a successful scan. Use the SimulScanData object that is passed to this callback routine to get the extracted scanned information.

Note: The SimulScanData should be processed on a background thread so that it does not block the UI thread.


public void onSimulScanData(SimulScanData simulscanData) {
        Date timestamp = new Date(simulscanData.getTimestamp());
        List<SimulScanElement> simulscanDataElements = simulscanData.getElements();
        List<SimulScanRegion> simulscanDataRegions = new ArrayList<SimulScanRegion>();
        for (SimulScanElement curElement : simulscanDataElements)
        {
            if (curElement instanceof SimulScanRegion) {
                Log.d(TAG, ((SimulScanRegion) curElement).getName());
            } else if (curElement instanceof SimulScanGroup) {
                List<SimulScanRegion> regionsInGroup = ((SimulScanGroup)curElement).getRegions();
                for (SimulScanRegion curRegion : regionsInGroup){
                    Log.d(TAG, “Group:”+ ((SimulScanGroup)curElement).getName() +” Region:”+ ((SimulScanRegion) curRegion).getName());
                }
            }
        }
 }

SimulScanData.getTemplate() returns the extracted template. This template information can be used to reconstruct the original scanned image from the extracted data. The SimulScanElements returned from SimulScanData.getElements() API are either instances of SimulScanRegion for SimulScanGroup. Use the SimulScanRegion’s getData() API to get the actual OCR, OMR, Barcode or image data. The type of the returned object from getData() will depend on the SimulScanRegion.

RegionType as shown in the table below:

RegionTypeData type
OCRString
OMRInteger
BarcodeString
PictureByte[] (binary image data)


Use the region object's .getRegionType() method to first determine the region type and then cast the region data to a usable type.

See the examples below:

OCR

     
    String sText = "";
    if (region.getRegionType() == RegionType.OCR)
    {
        if (region.getData() != null)
        {
           String[] OCRResults = (String[]) region.getData();
            if (null != OCRResults) {
                for (int nIndex = 0; nIndex < OCRResults.length; nIndex++)
                {
                   if (nIndex != 0) //if not first index, prepend with newline
                        sText = sText.concat("\n");
                     sText = sText.concat(OCRResults[nIndex]);
                }
           }
        }
        txtData.setText(sText);
    }

OMR

    
    if (region.getRegionType() == RegionType.OMR)
    {
       if (region.getData() != null)
       {
           int iChecked = (Integer)region.getData();

            switch (iChecked) {
                 case 1 :
                     sText = sText.concat(omrStatus[0].toString());
                     break;
                 case -1 :
                     sText = sText.concat(omrStatus[1].toString());
                     break;
                 default :
                     break;
             }
         }
         else
         {
             sText = sText.concat(omrStatus[1].toString()); //default to unchecked
         }
          txtData.setText(sText);
     }

BARCODE

    
    if (region.getRegionType() == RegionType.BARCODE)
    {
        if (region.getData() != null)
        {
            try
            {
               sText = sText.concat((String) region.getData());
            }
            catch (ClassCastException e) //will get here if post-processing is off
           {
               sText = "Post-processing is off";
           }
      }
      txtData.setText(sText);
   }

PICTURE

    
    if (region.getRegionType() == RegionType.PICTURE)
    {
       if (region.getData() != null)
       {
           byte[] jpegPicture = (byte[])region.getData();
       }
    }

Important considerations

Due to a known issue with the Symbol SimulScan framework version 1.8, the orientation of your application must be fixed preferably using the AndroidManifest.xml. Failing to do so may cause your application to hang if the orientation changes during a scan.

SimulScan Default Templates

The SimulScan default templates are available under "/enterprise/device/settings/datawedge/templates". Although this path is not accessible via the file browser on devices having latest images, it is possible to access the path programmatically and get templates copied to any other location preferred by the application. The application must obtain the SimulScanManager instance before attempting to copy these templates from above location.