Interface | Description |
---|---|
Readers.RFIDReaderEventHandler |
Interface to be implemented by fragments to be notified when a new device is discovered via bluetooth
|
RfidEventsListener |
The interface contains read event and status event handlers to be implemented by the application
in order to handle different RFID events generated.
|
Class | Description |
---|---|
ACCESS_OPERATION_CODE |
OPERATION_CODE: Operation Code for Operation Sequence
|
ACCESS_OPERATION_STATUS |
Contains the status of Access Operation execution result
|
AccessFilter |
This class represents the filter criteria for Access Operations like read, write, lock, and etc.
|
AccessOperationResult |
This holds the result of different operations performed
|
Actions |
This class represents the set of all operations that can be performed
on the reader like Inventory and Access operations using various type of
filters.
|
ALARM_LEVEL |
ALARM_LEVEL: define severity level of the Alarm
|
AntennaConfig |
The Class which holds all configuration of the Given Antenna
|
AntennaInfo |
Not Supported in the Android RFID SDK.
|
Antennas |
This class represents the Antenna of the reader
|
AttributeInfo |
Contains the attribute parameters and getters/setters of those parameters
|
BATCH_MODE |
Contains the state parameters of batch mode state and getters of these states.
|
BATCH_MODE_EVENT |
Contains the parameters for the batch mode event.
|
BATTERY_EVENT |
Contains the battery parameters and corresponding getters/setters of those parameters.
|
BEEPER_VOLUME |
Contains the different beeper parameters and getters of those parameters.
|
COMMUNICATION_STANDARD |
COMMUNICATION_STANDARD: Part of Reader capabilities
|
Config |
This class allows to perform reader configuration
GPI and GPO not supported in Android RFID SDK
|
Constants |
Class to maintain the strings used for notifications and intent actions
|
DISCONNECTION_EVENT_TYPE |
DISCONNECTION_EVENT_TYPE: Event indicating the reason for Disconnection
|
DIVIDE_RATIO |
DIVIDE_RATIO: Part of RF_MODES
|
DYNAMIC_POWER_OPTIMIZATION |
Dynamic power optimization
|
EventAction |
Contains the different Event actions
|
Events |
This class contains registration/de-registration of events on the reader.
|
FILTER_ACTION |
Filter Action for the PreFilter: State Aware, Unaware or Default.
|
FILTER_MATCH_PATTERN |
Match Criteria for patterns
|
FORWARD_LINK_MODULATION |
FORWARD_LINK_MODULATION: Part of RF_MODES
|
FrequencyHopInfo |
Gets the Frequency hop table and its length
|
FrequencyHopTable |
This class contains Frequency Hop table
|
Gen2v2 |
This class handles the Gen2v2 operations.
|
GEN2V2_OPERATION_CODE |
G2V2_OPERATION_CODE: Operation Codes for Gen2v2 operations
|
GEN2V2_OPERATION_STATUS |
Gen2v2 operation status messages
|
HANDHELD_TRIGGER_EVENT_TYPE |
HANDHELD_TRIGGER_EVENT_TYPE specifies the type trigger that occured.
|
HandheldTrigger |
Handheld-Trigger information.
|
Inventory |
This class handles Inventory operations.
|
INVENTORY_STATE |
INVENTORY_STATE: Inventory-State Parameter for PerformInventory
|
LocationInfo |
Contains the result of locating operation performed.
|
LOCK_DATA_FIELD |
LOCK_DATA_FIELD: Lock-data field Parameter for Lock
|
LOCK_PRIVILEGE |
LOCK_PRIVILEGE: Privilege Parameter for Lock
|
MEMORY_BANK |
MEMORY_BANK: The four memory banks as supported by Class 1 Gen 2 Specification
|
MODULATION |
MODULATION: Part of RF_MODES
|
OPERATION_END_SUMMARY |
Contains parameters of operation end summary and getters/setters.
|
OPERATION_QUALIFIER |
This type defines nature of Operation on the specified Antenna
|
PeriodicTrigger |
Periodic Trigger Information.
|
POWER_EVENT |
Contains the parameters of power event and getters/setters of those parameters.
|
PreFilters |
Filter criteria for Inventory.
|
Queue |
Queue: implements a simple queue mechanism.
|
RADIO_POWER_STATE |
Radio power state
|
READER_EXCEPTION_EVENT_TYPE |
READER_EXCEPTION_EVENT_TYPE: Event indicating the reason for Reader exception.
|
READER_ID_LENGTH |
Gets the value of mac/epc length
|
READER_ID_TYPE |
READER_ID_TYPE: Specifies the Reader ID Type
|
READER_TYPE |
READER_TYPE: Used in Reader-Management API: Login
|
ReaderCapabilities |
This class represents the Reader Capabilities
|
ReaderDevice |
Contains the paramaters such as name, password, address of the reader device and methods to manage
these parameters.
|
ReaderInfo |
This class contains the reader's information which includes name, description, location and contact
|
Readers |
This class contains the management of Readers as bluetooth device.
|
RegionInfo |
Contains the paramters of Region Information and methods to manage these parameters
|
RegulatoryConfig |
Contains the parameters of Regulatory config and methods to get/set these parameters
|
ReportTriggers |
Class related to REPORT_TRIGGERS struct/class
Not Supported in the Android RFID SDK.
|
ResetReadProtectParams |
Get/set/reset access password
|
RFID_EVENT_TYPE |
Event Type: Parameter for RegisterEventNotification
|
RFIDReader |
Provides the RFIDReader object.
|
RfidReadEvents |
This class gets the readevent data and set the read event data
|
RFIDResults |
Contains the status of function execution result
|
RfidStatusEvents |
Sets the statusEvent data
|
RFModes |
Gets the RFMode table and its size
|
RFModeTable |
Gets an entry of RFModeTable, size and protocolID
|
RFModeTableEntry |
This class represents the RF Mode table entry
|
RUN_STATUS |
Get/set the run status
|
SeenTime |
Represents the Tag Seen time.
|
SESSION |
SESSION: Session Parameter for PerformInventory
|
SetAttribute |
Contains the parameters of set attributes and getters/setters of those parameters
|
SL_FLAG |
SL_FLAG: Select-Flag Parameter for PerformInventory
|
SPECTRAL_MASK_INDICATOR |
SPECTRAL_MASK_INDICATOR indicates the Spectral mask characteristics of the mode.
|
START_TRIGGER_TYPE |
START_TRIGGER_TYPE: Start Trigger Type Parameter for Inventory and Access Operations
|
StartTrigger |
Start Trigger Information.
|
STATE_AWARE_ACTION |
STATE_AWARE_ACTION:Action Parameter for PreFilter (C1G2 Select).
|
STATUS_EVENT_TYPE |
Gives the value of status according to different events
|
STOP_TRIGGER_TYPE |
STOP_TRIGGER_TYPE: Stop Trigger Type Parameter for Inventory and Access operations
|
StopTrigger |
Stop Trigger Information.
|
SupportedRegions |
Contains the supported region list.
|
SYSTEMTIME |
Gives the system time
|
TAG_FIELD |
TAG_FIELD specifies the fields to be enabled in TAG_DATA.
|
TagAccess |
This class handles all the Tag Access operations.
|
TagData |
Represents RFID Tag Data
|
TagDataArray |
Gets the tags and the number of tags in tagdata array
|
TagLocationing |
Contains the api for performing and stoping tag locationing
|
TagPatternBase |
Tag Pattern Information for Filtering.
|
TagStorageSettings |
To configure tag storage related settings such as Maximum tag count, maximum
size of memory bank and Maximum tag ID length
|
TARGET |
Target Parameter for PreFilter (C1G2 Select).
|
TEMPERATURE_SOURCE |
TEMPERATURE_SOURCE: indicating whether PA or Ambient
|
TRACE_LEVEL |
TRACE_LEVEL: Trace-level setting for SetTraceLevel
|
TriggerInfo |
Contains Trigger criterea to be used for an Inventory or Access Sequence operation
|
TriggerWithTimeout |
Triggers with timeout.
|
TRUNCATE_ACTION |
TRUNCATE_ACTION indicates whether only a truncated portion of the tag is
to be backscattered by the tag or not.
|
UNIQUE_TAG_REPORT_SETTING |
Unique tag report setting
|
UNTRACEABLE_RANGE |
The 2 ways to set range in g2v2 Untraceable command
|
UNTRACEABLE_TID |
3 ways to show tid in g2v2 untraceable command
|
UpdateStatus |
Represents the software update status
|
UpTime |
Represents the Uptime.
|
UTCTime |
This class represents UTC Time.
|
VersionInfo |
Gets the Dll version
|
WRITE_FIELD_CODE |
WRITE_FIELD_CODE: Specific Field of Write operation
|
Enum | Description |
---|---|
ENUM_SERVICE_STATUS | |
ENUM_TRANSPORT | |
ENUM_TRIGGER_MODE |
Exception | Description |
---|---|
InvalidUsageException |
InvalidUsageException is thrown when an invalid usage is detected by the
class library.
|
OperationFailureException |
OperationFailureException is thrown when a failure occurs in the
class library.
|