Set Config

Intent i = new Intent();
i.setAction("com.symbol.datawedge.api.ACTION");
i.putExtra("com.symbol.datawedge.api.SET_CONFIG", <mainbundle>);

• Default action_param values are 0, empty or none unless otherwise noted.
• To help minimize data loss, Zebra recommends sending a DELAY of 50 ms after sending any ENTER, LINE FEED or TAB character.

APP_LIST

An array of bundles that contains a set of PACKAGE_NAMES and an ACTIVITY_LIST to be associated with the Profile.

APP_LIST BUNDLE

Contains the following properties:

PACKAGE_NAME [String]: ex: "com.symbol.emdk.barcodesample1" or a wildcard (*) character

ACTIVITY_LIST [List]: A list of activities for the PACKAGE_NAME. Wildcard (*) character also supported.

Scanner Identifiers

The scanner identifier (introduced in DataWedge 6.5) permits scanners to be identified by a friendly name rather than an index number.

SCANNER_IDENTIFIER [String]: Present in each scanner info bundle for each scanner supported in the device. Index and identifier parameters are both supported in DataWedge and higher; the scanner identifier value takes precedence if an index also is referenced in the code.

Possible values:

• AUTO - Automatic scanner selection
• INTERNAL_IMAGER - Built-in imager scanner
• INTERNAL_LASER - Built-in laser scanner
• INTERNAL_CAMERA - Built-in camera scanner
• SERIAL_SSI - Pluggable Z-back scanner for ET50/ET55
• BLUETOOTH_SSI - RS507 Bluetooth scanner
• BLUETOOTH_RS6000 - RS6000 Bluetooth scanner
• BLUETOOTH_DS2278 - DS2278 Bluetooth scanner
• BLUETOOTH_DS3678 - DS3678 Bluetooth scanner
• PLUGABLE_SSI - Serial SSI scanner RS429 (for use with WT6000)
• PLUGABLE_SSI_RS5000 - Serial SSI scanner RS5000 (for use with WT6000)
• USB_SSI_DS3608 - DS3608 pluggable USB scanner

Result Codes

DataWedge returns the following error codes if the app includes the intent extras SEND_RESULT and COMMAND_IDENTIFIER to enable the app to get results using the DataWedge result intent mechanism. See Example, below.

• PLUGIN_NOT_SUPPORTED - An attempt was made to configure a plug-in that is not supported by DataWedge intent APIs
• BUNDLE_EMPTY - The bundle contains no data
• PROFILE_NAME_EMPTY - An attempt was made to configure a Profile name with no data
• PROFILE_NOT_FOUND - An attempt was made to perform an operation on a Profile that does not exist
• PLUGIN_BUNDLE_INVALID - A passed plug-in parameter bundle is empty or contains insufficient information
• PARAMETER_INVALID - The passed parameters were empty, null or invalid
• APP_ALREADY_ASSOCIATED - An attempt was made to associate an app that was already associated with another Profile
• OPERATION_NOT_ALLOWED - An attempt was made to rename or delete a protected Profile or to associate an app with Profile0
• RESULT_ACTION_RESULT_CODE_EMPTY_RULE_NAME - Rule name empty or undefined in ADF_RULE bundle

Also see the Result Codes guide for more information.

Return Values

Error and debug messages are logged to the Android logging system, which can be viewed and filtered by the logcat command. Use logcat from an ADB shell to view the log messages:

$ adb logcat -s DWAPI

Error messages are logged for invalid actions and parameters

Scanner Input Parameters

Refer to Barcode Input for more information on decoders, decoder paramsters, and scan parameters.

Important: Support for decode parameters can vary depending on the selected scanning device. For device-specific support notes, please refer to the Integrator Guide that accompanied the unit.

All parameters are case sensitive.

UDI Parameters

For more information, see Barcode Input.

Other Scanner Input Parameters:

Serial Input Parameters

Important: Support for serial parameters varies by device. For device-specific support notes, please refer to the Integrator Guide that accompanied the unit.

All parameters are case sensitive.

Simulscan Input Parameters

All parameters are case sensitive.

Data Capture Plus (DCP) Input Parameters

All parameters are case sensitive.

See DCP Input.

MSR (Magnetic Stripe) Input Parameters

All parameters are case sensitive.

Keystroke Output Parameters

All parameters are case sensitive.

Keystroke Delay Notes

• The keystroke_delay_extended_ascii parameter is deprecated.
• If a Keystroke Plug-in bundle uses the keystroke_delay_extended_ascii parameter, DataWedge sets the keystroke_delay_multibyte_chars_only parameter to true.
• If both the keystroke_delay_extended_ascii and keystroke_character_delay parameters are sent:
  • The keystroke_character_delay value is retained.
  • The keystroke_delay_extended_ascii value is ignored.
  • If available, the keystroke_delay_multibyte_chars_only value is saved; it is otherwise considered false.

IP (Internet Protocol) Output Parameters

All parameters are case sensitive.

TOKEN Parameters

Applicable for UDI or multibarcodes.

All parameters are case sensitive.

See UDI Data Output in IP Output or Keystroke Output

Example Code

Nested bundles

// MAIN BUNDLE PROPERTIES
    Bundle bMain = new Bundle();
    bMain.putString("PROFILE_NAME","Profile12");            // <- "Profile12" is a bundle
    bMain.putString("PROFILE_ENABLED","true");              // <- that will be enabled
    bMain.putString("CONFIG_MODE","CREATE_IF_NOT_EXIST");   // <- or created if necessary.

// PLUGIN_CONFIG BUNDLE PROPERTIES
    Bundle bConfig = new Bundle();
    bConfig.putString("PLUGIN_NAME","BARCODE");
    bConfig.putString("RESET_CONFIG","true"); 


// PARAM_LIST BUNDLE PROPERTIES
    Bundle bParams = new Bundle();
    bParams.putString("scanner_selection","auto");
    bParams.putString("scanner_input_enabled","true");
// 
// NOTE: The "scanner_selection" parameter (above) supports "auto" selection
// --OR-- the assignment of a scanner device index, which is obtained by 
// using the ENUMERATE_SCANNERS API.  
//
//      Syntax for scanner index:
//
//              Bundle bParams = new Bundle();
//      diff--> bParams.putString("current-device-id","0");
//              bParams.putString("scanner_input_enabled","true");
//
// 
// NEST THE BUNDLE "bParams" WITHIN THE BUNDLE "bConfig"
    bConfig.putBundle("PARAM_LIST", bParams);

// THEN NEST THE "bConfig" BUNDLE WITHIN THE MAIN BUNDLE "bMain"
    bMain.putBundle("PLUGIN_CONFIG", bConfig);

// CREATE APP_LIST BUNDLES (apps and/or activities to be associated with the Profile)
    Bundle bundleApp1 = new Bundle();
    bundleApp1.putString("PACKAGE_NAME","com.symbol.emdk.simulscansample1");
    bundleApp1.putStringArray("ACTIVITY_LIST", new String[]{
            "com.symbol.emdk.simulscansample1.DeviceControl",
            "com.symbol.emdk.simulscansample1.MainActivity",
            "com.symbol.emdk.simulscansample1.ResultsActivity.*",
            "com.symbol.emdk.simulscansample1.ResultsActivity2",
            "com.symbol.emdk.simulscansample1.SettingsFragment1"});

    Bundle bundleApp2 = new Bundle();
    bundleApp2.putString("PACKAGE_NAME","com.example.intents.datawedgeintent");
    bundleApp2.putStringArray("ACTIVITY_LIST", new String[]{
            "com.example.intents.datawedgeintent.DeviceControl",
            "com.example.intents.datawedgeintent.MainActivity",
            "com.example.intents.datawedgeintent.ResultsActivity",
            "com.example.intents.datawedgeintent.SettingsFragment1"});

    Bundle bundleApp3 = new Bundle();
    bundleApp3.putString("PACKAGE_NAME","*");
    bundleApp3.putStringArray("ACTIVITY_LIST", new String[]{"*"});

    Bundle bundleApp4 = new Bundle();
    bundleApp4.putString("PACKAGE_NAME","com.symbol.myzebraapp");
    bundleApp4.putStringArray("ACTIVITY_LIST", new String[]{"*"});

// NEXT APP_LIST BUNDLE(S) INTO THE MAIN BUNDLE
    bMain.putParcelableArray("APP_LIST", new Bundle[]{
            bundleApp1
            ,bundleApp2
            ,bundleApp3
            ,bundleApp4
    });

    Intent i = new Intent();
    i.setAction("com.symbol.datawedge.api.ACTION");
    i.putExtra("com.symbol.datawedge.api.SET_CONFIG", bMain);

    this.sendBroadcast(i);

Set RFID input configuration

private void createProfile() { 
 
        // Create bundle for profile configuration 
        Bundle setConfigBundle = new Bundle(); 
        setConfigBundle.putString("PROFILE_NAME","SampleConfigApi"); 
        setConfigBundle.putString("PROFILE_ENABLED", "true"); 
        setConfigBundle.putString("CONFIG_MODE","CREATE_IF_NOT_EXIST"); 
        setConfigBundle.putString("RESET_CONFIG", "false"); 
 
        // Associate profile with this app 
        Bundle appConfig = new Bundle(); 
        appConfig.putString("PACKAGE_NAME", getPackageName()); 
        appConfig.putStringArray("ACTIVITY_LIST", new String[]{"*"}); 
        setConfigBundle.putParcelableArray("APP_LIST", new Bundle[]{appConfig}); 
        setConfigBundle.remove("PLUGIN_CONFIG"); 
 
        // Set RFID configuration 
        Bundle rfidConfigParamList  = new Bundle(); 
        rfidConfigParamList.putString("rfid_input_enabled", "true"); 
        rfidConfigParamList.putString("rfid_beeper_enable", "true"); 
        rfidConfigParamList.putString("rfid_led_enable", "true"); 
        rfidConfigParamList.putString("rfid_antenna_transmit_power", "30"); 
        rfidConfigParamList.putString("rfid_memory_bank", "2"); 
        rfidConfigParamList.putString("rfid_session", "1"); 
        rfidConfigParamList.putString("rfid_trigger_mode", "1"); 
        rfidConfigParamList.putString("rfid_filter_duplicate_tags", "true"); 
        rfidConfigParamList.putString("rfid_hardware_trigger_enabled", "true"); 
        rfidConfigParamList.putString("rfid_tag_read_duration", "250"); 
        Bundle rfidConfigBundle = new Bundle(); 
        rfidConfigBundle.putString("PLUGIN_NAME", "RFID"); 
        rfidConfigBundle.putString("RESET_CONFIG", "true"); 
        rfidConfigBundle.putBundle("PARAM_LIST", rfidConfigParamList); 
 
        // Configure intent output for captured data to be sent to this app 
        Bundle intentConfig = new Bundle(); 
        intentConfig.putString("PLUGIN_NAME", "INTENT"); 
        intentConfig.putString("RESET_CONFIG", "true"); 
        Bundle intentProps = new Bundle(); 
        intentProps.putString("intent_output_enabled", "true"); 
        intentProps.putString("intent_action", "com.zebra.rfid.rwdemo.RWDEMO"); 
        intentProps.putString("intent_category", "android.intent.category.DEFAULT"); 
        intentProps.putString("intent_delivery", "0"); 
        intentConfig.putBundle("PARAM_LIST", intentProps); 
 
        // Add configurations into a collection 
        ArrayList<Parcelable> configBundles = new ArrayList<>(); 
        configBundles.add(rfidConfigBundle); 
        configBundles.add(intentConfig); 
        setConfigBundle.putParcelableArrayList("PLUGIN_CONFIG", configBundles); 
 
        // Broadcast the intent 
        Intent intent  = new Intent(); 
        intent.setAction("com.symbol.datawedge.api.ACTION"); 
        intent.putExtra("com.symbol.datawedge.api.SET_CONFIG", setConfigBundle); 
        sendBroadcast(intent);
} 

Set serial input configuration

//
// Port 1 Configuration [Start]
//
Bundle bPort1 = new Bundle();
bPort1.putString("serial_port_id", "0"); //Supported Values: 0,1
bPort1.putString("serial_input_enabled", "true"); // Supported Values: true, false
bPort1.putString("serial_baudrate", "1200"); // Supported Values (some): 300, 1200, 2400, 4800, 19200, and more
bPort1.putString("serial_databits", "8"); //Supported Values: 8, 7
bPort1.putString("serial_parity", "ODD"); //Supported Values: NONE, ODD, EVEN, MARK, SPACE
bPort1.putString("serial_stopbits", "1"); //Supported Values: 1, 2
bPort1.putString("serial_flow", "FLOW_RTS_CTS"); //Supported Values: FLOW_NONE, FLOW_RTS_CTS, FLOW_DSR_DTR, FLOW_XON_XOFF
//
// Port 1 Configuration [End]
//
// Port 2 Configuration [Start]
//
Bundle bPort2 = new Bundle();
bPort2.putString("serial_port_id", "1");
bPort2.putString("serial_input_enabled", "true");
bPort2.putString("serial_baudrate", "300");
bPort2.putString("serial_databits", "7");
//bPort2.putString("abc", "123");
bPort2.putString("serial_stopbits", "2");
bPort2.putString("serial_flow", "FLOW_DSR_DTR");
bPort2.putString("serial_parity", "EVEN");
//
// Port 2 Configuration [End]
//
Bundle bConfig = new Bundle();
bConfig.putString("RESET_CONFIG", "false");
bConfig.putString("PLUGIN_NAME", "SERIAL");
bConfig.putParcelableArray("DEVICE_LIST", new Bundle[]{
        bPort1, bPort2
});

Bundle bMain = new Bundle();
bMain.putString("PROFILE_NAME", "Profile0 (default)");
bMain.putString("CONFIG_MODE", "UPDATE");
bMain.putBundle("PLUGIN_CONFIG", bConfig);

Intent i = new Intent();
i.setAction("com.symbol.datawedge.api.ACTION");
i.putExtra("com.symbol.datawedge.api.SET_CONFIG", bMain);
i.putExtra("SEND_RESULT","LAST_RESULT");
// i.putExtra("SEND_RESULT", "true");  // For versions prior to DataWedge 7.1
i.putExtra("com.symbol.datawedge.api.RESULT_CATEGORY", DEFAULT_CATEGORY);
i.putExtra("COMMAND_IDENTIFIER", "DW_SERIAL_COMMAND");

this.sendBroadcast(i);

Set Simulscan input configuration

// SetConfig [Start]
Bundle bMain = new Bundle();

Bundle bConfigSimulScan = new Bundle();
Bundle bParamsSimulScan = new Bundle();
bParamsSimulScan.putString("simulscan_input_enabled", "true");
bParamsSimulScan.putString("simulscan_input_source", "Imager"); //Supported values: Camera, Imager, Default
bParamsSimulScan.putString("simulscan_region_separator", "TAB"); //Supported Values:None, TAB, CR, LF, NONE
bParamsSimulScan.putString("simulscan_log_dir", "/storage/zebra/intent/");
bParamsSimulScan.putString("simulscan_enable_timestamp", "true");
bParamsSimulScan.putString("simulscan_template", "UserDefinedQuantity.xml"); 
// Ex:  UserDefinedQuantity.xml, Default - BankCheck.xml, Default - Barcode 1.xml, Default - Barcode 10.xml, Default - Barcode 2.xml, Default - Barcode 4.xml, Default - Barcode 5.xml, Default - BookNumber.xml, Default - DocCap + Optional Barcode.xml, Default - DocCap + Required Barcode.xml, Default - TravelDoc.xml, Default - Unstructured Multi-Line.xml, Default - Unstructured Single Line.xml

//Setting dynamic template params
Bundle templateParamsBundle = new Bundle();
templateParamsBundle.putString("dynamic_quantity", "100");
bParamsSimulScan.putBundle("simulscan_template_params",templateParamsBundle); 
// This param will work only for the templates that have dynamic params. For others, this will throw PARAMETER_NOT_SUPPORTED

bConfigSimulScan.putString("PLUGIN_NAME", "SIMULSCAN");
bConfigSimulScan.putString("RESET_CONFIG", "true");
bConfigSimulScan.putBundle("PARAM_LIST", bParamsSimulScan);

ArrayList<Bundle> bundlePluginConfig = new ArrayList<>();
bundlePluginConfig.add(bConfigSimulScan);
bMain.putParcelableArrayList("PLUGIN_CONFIG", bundlePluginConfig);

bMain.putString("PROFILE_NAME", "Profile007");
bMain.putString("PROFILE_ENABLED", "true");
bMain.putString("CONFIG_MODE", "CREATE_IF_NOT_EXIST");

Intent iSetConfig = new Intent();
iSetConfig.setAction("com.symbol.datawedge.api.ACTION");
iSetConfig.putExtra("com.symbol.datawedge.api.SET_CONFIG", bMain);
iSetConfig.putExtra("SEND_RESULT", "LAST_RESULT");
iSetConfig.putExtra("COMMAND_IDENTIFIER", "INTENT_API");
// SetConfig [End]

this.sendBroadcast(iSetConfig);

Set DCP input configuration

//SetConfig [Start] 
Bundle bMain = new Bundle(); 

Bundle bConfigDCP = new Bundle(); 
Bundle bParamsDCP = new Bundle(); 
bParamsDCP.putString("dcp_input_enabled", "true"); 
bParamsDCP.putString("dcp_dock_button_on", "LEFT"); //Supported values: BOTH - Left or Right, LEFT - Left only, RIGHT - Right only 
bParamsDCP.putString("dcp_start_in", "FULLSCREEN"); //Supported Values: FULLSCREEN, BUTTON, BUTTON_ONLY 
bParamsDCP.putString("dcp_highest_pos", "30"); //Supported Values:  0 - 100, Highest pos can not be greater than lowest pos 
bParamsDCP.putString("dcp_lowest_pos", "40"); //Supported Values: 0 - 100, Highest pos can not be greater than lowest pos 
bParamsDCP.putString("dcp_drag_detect_time", "501"); //Supported Values: 0 - 1000 
bConfigDCP.putString("RESET_CONFIG", "false"); 
bConfigDCP.putBundle("PARAM_LIST", bParamsDCP); 

bMain.putBundle("DCP", bConfigDCP); 

bMain.putString("PROFILE_NAME", "Profile007"); 
bMain.putString("PROFILE_ENABLED", "true"); 
bMain.putString("CONFIG_MODE", "CREATE_IF_NOT_EXIST"); 

Intent iSetConfig = new Intent(); 
iSetConfig.setAction("com.symbol.datawedge.api.ACTION"); 
iSetConfig.putExtra("com.symbol.datawedge.api.SET_CONFIG", bMain); 
iSetConfig.putExtra("SEND_RESULT", "LAST_RESULT"); 
iSetConfig.putExtra("COMMAND_IDENTIFIER", "INTENT_API"); 
//SetConfig [End] 

this.sendBroadcast(iSetConfig); 

Set MSR input configuration

// SetConfig [Start]
Bundle bMain = new Bundle();

Bundle bConfigMSR = new Bundle();
Bundle bParamsMSR = new Bundle();

bParamsMSR.putString("msr_input_enabled", "true");

bConfigMSR.putString("PLUGIN_NAME", "MSR");
bConfigMSR.putString("RESET_CONFIG", "true");
bConfigMSR.putBundle("PARAM_LIST", bParamsMSR);

bMain.putBundle("PLUGIN_CONFIG", bConfigMSR);

bMain.putString("PROFILE_NAME", "Profile007");
bMain.putString("PROFILE_ENABLED", "true");
bMain.putString("CONFIG_MODE", "CREATE_IF_NOT_EXIST");

Intent iSetConfig = new Intent();
iSetConfig.setAction("com.symbol.datawedge.api.ACTION");
iSetConfig.putExtra("com.symbol.datawedge.api.SET_CONFIG", bMain);
iSetConfig.putExtra("SEND_RESULT", "LAST_RESULT");
iSetConfig.putExtra("COMMAND_IDENTIFIER", "INTENT_API");
// SetConfig [End]

this.sendBroadcast(iSetConfig);

Set voice input configuration

Bundle bMain = new Bundle();
bMain.putString("PROFILE_NAME", "DWDemo");
bMain.putString("PROFILE_ENABLED", "true");
bMain.putString("CONFIG_MODE", "CREATE_IF_NOT_EXIST");

Bundle bConfig = new Bundle();
bConfig.putString("PLUGIN_NAME","VOICE");
bConfig.putString("RESET_CONFIG","false");

Bundle bParams = new Bundle();
bParams.putString("voice_input_enabled","true"); // Supported Values: true, false
bParams.putString("voice_data_capture_start_phrase","hi");
bParams.putString("voice_data_capture_end_phrase","end");
bParams.putString("voice_end_detection_timeout","3");
bParams.putString("voice_tab_command","true"); // Supported Values: true, false
bParams.putString("voice_enter_command","true"); // Supported Values: true, false
bParams.putString("voice_data_type","1");
bParams.putString("voice_start_phrase_waiting_tone","true"); // Supported Values: true, false
bParams.putString("voice_data_capture_waiting_tone","false"); // Supported Values: true, false
bParams.putString("voice_validation_window","true"); // Supported Values: true, false
bParams.putString("voice_offline_speech","true"); // Supported Values: true, false

bConfig.putBundle("PARAM_LIST", bParams);

bMain.putBundle("PLUGIN_CONFIG", bConfig); //true, false

Intent i = new Intent();
i.setAction("com.symbol.datawedge.api.ACTION");
i.putExtra("com.symbol.datawedge.api.SET_CONFIG", bMain);
    i.putExtra("SEND_RESULT","LAST_RESULT");
    // i.putExtra("SEND_RESULT", "true");  // For versions prior to DataWedge 7.1
i.putExtra("COMMAND_IDENTIFIER", "SET_CONFIG");
this.sendBroadcast(i);

Set BDF processing

Process Plug-ins manipulate the acquired data in a specified way before sending it to the associated app via the Output Plug-in. About BDF. About ADF.

// Main bundle properties
    Bundle bMain = new Bundle();
    bMain.putString("PROFILE_NAME","Profile12");
    bMain.putString("PROFILE_ENABLED","true");
    bMain.putString("CONFIG_MODE","CREATE_IF_NOT_EXIST");

// plugin_config bundle properties
    Bundle bConfig = new Bundle();
    bConfig.putString("PLUGIN_NAME","BDF");
    bConfig.putString("RESET_CONFIG","true");
    bConfig.putString("OUTPUT_PLUGIN_NAME","KEYSTROKE");

// param_list bundle properties
    Bundle bParams = new Bundle();
    bParams.putString("bdf_enabled","true");
    bParams.putString("bdf_prefix","AAA");
    bParams.putString("bdf_send_enter","true");

    bConfig.putBundle("PARAM_LIST", bParams);

    bMain.putBundle("PLUGIN_CONFIG", bConfig);

    Intent i = new Intent();
    i.setAction("com.symbol.datawedge.api.ACTION");
    i.putExtra("com.symbol.datawedge.api.SET_CONFIG", bMain);
    this.sendBroadcast(i);

Set ADF processing

//MAIN BUNDLE PROPERTIES
Bundle bMain = new Bundle();
bMain.putString("PROFILE_NAME","ProfileTest");
bMain.putString("PROFILE_ENABLED","true");
bMain.putString("CONFIG_MODE","CREATE_IF_NOT_EXIST");

//PLUGIN_CONFIG BUNDLE PROPERTIES
Bundle bConfig = new Bundle();
bConfig.putString("PLUGIN_NAME","ADF");
bConfig.putString("RESET_CONFIG","true");
bConfig.putString("OUTPUT_PLUGIN_NAME","KEYSTROKE");
bConfig.putString("adf_enabled","true");

//PARAM_LIST BUNDLE PROPERTIES
//RULE BUNDLE PROPERTIES
Bundle bParamsRule1 = new Bundle();
bParamsRule1.putString("name","Rule1");
bParamsRule1.putString("enabled","true");
bParamsRule1.putString("alldevices","true");
bParamsRule1.putString("string","abc");
bParamsRule1.putString("string_pos","2");
bParamsRule1.putString("string_len","4");

//ACTION BUNDLE PROPERTIES
Bundle bParamsAction1 = new Bundle();
bParamsAction1.putString("type","SEND_NEXT");
bParamsAction1.putString("action_param_1","5");


//ACTION BUNDLE PROPERTIES
Bundle bParamsAction2 = new Bundle();
bParamsAction2.putString("type","SKIP_BACK");

//DEVICE BUNDLE PROPERTIES
Bundle bParamsDevice1 = new Bundle();
bParamsDevice1.putString("device_id","BARCODE");
bParamsDevice1.putString("enabled","true");
bParamsDevice1.putString("alldecoders","false");
bParamsDevice1.putString("all_label_ids","false");

//DEVICE BUNDLE PROPERTIES
Bundle bParamsDevice2 = new Bundle();
bParamsDevice2.putString("device_id","MSR");
bParamsDevice2.putString("enabled","true");

//DEVICE BUNDLE PROPERTIES
Bundle bParamsDevice3 = new Bundle();
bParamsDevice3.putString("device_id","SIMULSCAN");
bParamsDevice3.putString("enabled","true");

//DECODER BUNDLE PROPERTIES
Bundle bParamsDecoders1 = new Bundle();
bParamsDecoders1.putString("device_id","BARCODE");
bParamsDecoders1.putString("decoder","Australian Postal");
bParamsDecoders1.putString("enabled","true");

//DECODER BUNDLE PROPERTIES
Bundle bParamsDecoders2 = new Bundle();
bParamsDecoders2.putString("device_id","BARCODE");
bParamsDecoders2.putString("decoder","Bookland");
bParamsDecoders2.putString("enabled","false");

//DECODER BUNDLE PROPERTIES
Bundle bParamsDecoders3 = new Bundle();
bParamsDecoders3.putString("device_id","BARCODE");
bParamsDecoders3.putString("decoder","Codebar");
bParamsDecoders3.putString("enabled","true");

//LABEL ID BUNDLE PROPERTIES
Bundle bParamsLabelID1 = new Bundle();
bParamsLabelID1.putString("device_id","BARCODE");
bParamsLabelID1.putString("label_id","UDI_GS1");
bParamsLabelID1.putString("enabled","true");

//LABEL ID BUNDLE PROPERTIES
Bundle bParamsLabelID2 = new Bundle();
bParamsLabelID2.putString("device_id","BARCODE");
bParamsLabelID2.putString("label_id","UDI_HIBCC");
bParamsLabelID2.putString("enabled","true");

ArrayList<Bundle> bParamsActionList = new ArrayList<Bundle>();
bParamsActionList.add(bParamsAction1);
bParamsActionList.add(bParamsAction2);

ArrayList<Bundle> bParamsDeviceList = new ArrayList<Bundle>();
bParamsDeviceList.add(bParamsDevice1);
bParamsDeviceList.add(bParamsDevice2);
bParamsDeviceList.add(bParamsDevice3);

ArrayList<Bundle> bParamsDecoderList = new ArrayList<Bundle>();
bParamsDecoderList.add(bParamsDecoders1);
bParamsDecoderList.add(bParamsDecoders2);
bParamsDecoderList.add(bParamsDecoders3);

ArrayList<Bundle> bParamsLabelIDList = new ArrayList<Bundle>();
bParamsLabelIDList.add(bParamsLabelID1);
bParamsLabelIDList.add(bParamsLabelID2);

bParamsRule1.putParcelableArrayList("ACTIONS",bParamsActionList);
bParamsRule1.putParcelableArrayList("DEVICES",bParamsDeviceList);
bParamsRule1.putParcelableArrayList("DECODERS",bParamsDecoderList);
bParamsRule1.putParcelableArrayList("LABEL_IDS",bParamsLabelIDList);

Bundle bParamsRule2 = new Bundle();
bParamsRule2.putString("name","Rule30");
bParamsRule2.putString("enabled","true");
bParamsRule2.putString("alldevices","true");
bParamsRule2.putString("string","cde");
bParamsRule2.putString("string_pos","3");
bParamsRule2.putString("string_len","5");

ArrayList<Bundle> bParamsList = new ArrayList<Bundle>();
bParamsList.add(bParamsRule1);
bParamsList.add(bParamsRule2);

bConfig.putParcelableArrayList("PARAM_LIST", bParamsList);

bMain.putBundle("PLUGIN_CONFIG", bConfig);

Intent i = new Intent();
i.setAction("com.symbol.datawedge.api.ACTION");
i.putExtra("com.symbol.datawedge.api.SET_CONFIG", bMain);
i.putExtra("SEND_RESULT","LAST_RESULT");
// i.putExtra("SEND_RESULT", "true");  // For versions prior to DataWedge 7.1
i.putExtra("COMMAND_IDENTIFIER", "ADF_API");
this.sendBroadcast(i);

// GET RESULT CODE
public void onReceive(Context context, Intent intent){

String command = intent.getStringExtra("COMMAND");
String commandidentifier = intent.getStringExtra("COMMAND_IDENTIFIER");
String result = intent.getStringExtra("RESULT");

Bundle bundle = new Bundle();
String resultInfo = "";
if(intent.hasExtra("RESULT_INFO")){
    bundle = intent.getBundleExtra("RESULT_INFO");
    Set<String> keys = bundle.keySet();
    for (String key: keys) {
        resultInfo += key + ": "+bundle.getString(key) + "\n";
    }
}

String text = "Command: "+command+"\n" +
        "Result: " +result+"\n" +
        "Result Info: " +resultInfo + "\n" +
        "CID:"+commandidentifier;
Toast.makeText(context, text, Toast.LENGTH_LONG).show();
};

Set TOKEN processing

// SetConfig [Start]
Bundle bMain = new Bundle();

Bundle bConfigToken = new Bundle();
Bundle bParamsToken = new Bundle();

bParamsToken.putString("send_tokens_option", "BARCODES_TOKENS"); // Supported Values: DISABLED, TOKENS, BARCODES_TOKENS
bParamsToken.putString("token_separator", "LF"); //Supported Values:None, TAB, CR, LF, NONE
bParamsToken.putString("multibarcode_separator", "LF"); //Supported Values:None, TAB, CR, LF, NONE

Bundle tokenOrder_manufacturing_date_original = new Bundle();
tokenOrder_manufacturing_date_original.putString("name", "manufacturing_date_original");
tokenOrder_manufacturing_date_original.putString("enabled", "true");

Bundle tokenOrder_expiration_date_original = new Bundle();
tokenOrder_expiration_date_original.putString("name", "expiration_date_original");
tokenOrder_expiration_date_original.putString("enabled", "true");

Bundle tokenOrder_di = new Bundle();
tokenOrder_di.putString("name", "di");
tokenOrder_di.putString("enabled", "true");

Bundle tokenOrder_lot_number = new Bundle();
tokenOrder_lot_number.putString("name", "lot_number");
tokenOrder_lot_number.putString("enabled", "true");


Bundle tokenOrder_serial_number = new Bundle();
tokenOrder_serial_number.putString("name", "serial_number");
tokenOrder_serial_number.putString("enabled", "true");


Bundle tokenOrder_mpho_lot_number = new Bundle();
tokenOrder_mpho_lot_number.putString("name", "mpho_lot_number");
tokenOrder_mpho_lot_number.putString("enabled", "true");


Bundle tokenOrder_donation_id = new Bundle();
tokenOrder_donation_id.putString("name", "donation_id");
tokenOrder_donation_id.putString("enabled", "true");

Bundle tokenOrder_labeler_identification_code = new Bundle();
tokenOrder_labeler_identification_code.putString("name", "labeler_identification_code");
tokenOrder_labeler_identification_code.putString("enabled", "true");


Bundle tokenOrder_product_or_catalog_number = new Bundle();
tokenOrder_product_or_catalog_number.putString("name", "product_or_catalog_number");
tokenOrder_product_or_catalog_number.putString("enabled", "true");

Bundle tokenOrder_unit_of_measure_id = new Bundle();
tokenOrder_unit_of_measure_id.putString("name", "unit_of_measure_id");
tokenOrder_unit_of_measure_id.putString("enabled", "false");

Bundle tokenOrder_quantity = new Bundle();
tokenOrder_quantity.putString("name", "quantity");
tokenOrder_quantity.putString("enabled", "false");


// Specify the token order
ArrayList<Bundle> tokenOrderList = new ArrayList<>();
tokenOrderList.add(tokenOrder_manufacturing_date_original);
tokenOrderList.add(tokenOrder_expiration_date_original);
tokenOrderList.add(tokenOrder_lot_number);
tokenOrderList.add(tokenOrder_di);
tokenOrderList.add(tokenOrder_serial_number);
tokenOrderList.add(tokenOrder_mpho_lot_number);
tokenOrderList.add(tokenOrder_donation_id);
tokenOrderList.add(tokenOrder_labeler_identification_code);
tokenOrderList.add(tokenOrder_product_or_catalog_number);
tokenOrderList.add(tokenOrder_unit_of_measure_id);
tokenOrderList.add(tokenOrder_quantity);


bParamsToken.putParcelableArrayList("token_order", tokenOrderList);


bConfigToken.putString("PLUGIN_NAME", "TOKEN");
bConfigToken.putString("OUTPUT_PLUGIN_NAME", "KEYSTROKE"); // Tokens are supported only in KEYSTROKE and IP plugins only
bConfigToken.putString("RESET_CONFIG", "true");
bConfigToken.putBundle("PARAM_LIST", bParamsToken);

bMain.putBundle("PLUGIN_CONFIG", bConfigToken);

bMain.putString("PROFILE_NAME", "Profile007");
bMain.putString("PROFILE_ENABLED", "true");
bMain.putString("CONFIG_MODE", "CREATE_IF_NOT_EXIST");

Intent iSetConfig = new Intent();
iSetConfig.setAction("com.symbol.datawedge.api.ACTION");
iSetConfig.putExtra("com.symbol.datawedge.api.SET_CONFIG", bMain);
iSetConfig.putExtra("SEND_RESULT", "LAST_RESULT");
iSetConfig.putExtra("COMMAND_IDENTIFIER", "INTENT_API");
// SetConfig [End]

this.sendBroadcast(iSetConfig);

Set KEYSTROKE output

@Override
protected void onCreate(Bundle savedInstanceState) {
    super.onCreate(savedInstanceState);
    setContentView(R.layout.activity_main);
    registerReceivers();
}

@Override
protected void onResume() {
    super.onResume();
    setKeystrokeOutputPluginConfiguration();
}

private void registerReceivers() {
    IntentFilter filter = new IntentFilter();
    filter.addAction("com.symbol.datawedge.api.RESULT_ACTION");
    filter.addCategory("android.intent.category.DEFAULT");
    registerReceiver(datawedgeKeystrokeNIntentStatusBR, filter);
}

private BroadcastReceiver datawedgeKeystrokeNIntentStatusBR = new BroadcastReceiver() {
    @Override
    public void onReceive(Context context, Intent intent) {
        String command = intent.getStringExtra("COMMAND").equals("") ? "EMPTY" : intent.getStringExtra("COMMAND");
        String commandIdentifier = intent.getStringExtra("COMMAND_IDENTIFIER").equals("") ? "EMPTY" : intent.getStringExtra("COMMAND_IDENTIFIER");
        String result = intent.getStringExtra("RESULT").equals("") ? "EMPTY" : intent.getStringExtra("RESULT");

        Bundle bundle;
        String resultInfo = "";
        if (intent.hasExtra("RESULT_INFO")) {
            bundle = intent.getBundleExtra("RESULT_INFO");
            Set<String> keys = bundle.keySet();
            for (String key : keys) {
                resultInfo += key + ": " + bundle.getString(key) + "\n";
            }
        }

         String text="\n"+"Command:      " + command + "\n" +
                          "Result:       " + result + "\n" +
                          "Result Info:  " + resultInfo + "\n" +
                          "CID:          " + commandIdentifier;

        Log.d("TAG”,text);
    }
};

public void setKeystrokeOutputPluginConfiguration() {

    Bundle configBundle = new Bundle();
    configBundle.putString("PROFILE_NAME","UserProfile");
    configBundle.putString("PROFILE_ENABLED","true");
    configBundle.putString("CONFIG_MODE","CREATE_IF_NOT_EXIST");

    Bundle bConfig = new Bundle();

    bConfig.putString("PLUGIN_NAME", "KEYSTROKE");
    Bundle bParams = new Bundle();
    bParams.putString("keystroke_output_enabled","true");
    bParams.putString("keystroke_action_char","9"); // 0, 9 , 10, 13
    bParams.putString("keystroke_delay_extended_ascii","500");
    bParams.putString("keystroke_delay_control_chars","800");
    bConfig.putBundle("PARAM_LIST", bParams);

    configBundle.putBundle("PLUGIN_CONFIG", bConfig);

    Intent i = new Intent();
    i.setAction("com.symbol.datawedge.api.ACTION");
    i.putExtra("com.symbol.datawedge.api.SET_CONFIG", configBundle);
        i.putExtra("SEND_RESULT","LAST_RESULT");
        // i.putExtra("SEND_RESULT", "true");  // For versions prior to DataWedge 7.1
    i.putExtra("COMMAND_IDENTIFIER", "KEYSTROKE_API");
    this.sendBroadcast(i);
}

@Override
protected void onDestroy() {
    super.onDestroy();
    unregisterReceiver(datawedgeKeystrokeNIntentStatusBR);
}

Set IP output

// SetConfig [Start]
Bundle bMain = new Bundle();

Bundle bConfigIPOutput = new Bundle();
Bundle bParamsIPOutput = new Bundle();
bParamsIPOutput.putString("ip_output_enabled", "true");
bParamsIPOutput.putString("ip_output_ip_wedge_enabled", "false");
bParamsIPOutput.putString("ip_output_protocol", "UDP"); //Supported Values: TCP: UDP
bParamsIPOutput.putString("ip_output_address", "192.168.0.1"); //Supported Values : IP Address format
bParamsIPOutput.putString("ip_output_port", "55555"); //Supported Values : 1 - 65535

bConfigIPOutput.putString("PLUGIN_NAME", "IP");
bConfigIPOutput.putString("RESET_CONFIG", "true");
bConfigIPOutput.putBundle("PARAM_LIST", bParamsIPOutput);

ArrayList<Bundle> bundlePluginConfig = new ArrayList<>();
bundlePluginConfig.add(bConfigIPOutput);
bMain.putParcelableArrayList("PLUGIN_CONFIG", bundlePluginConfig);


bMain.putString("PROFILE_NAME", "Profile007");
bMain.putString("PROFILE_ENABLED", "true");
bMain.putString("CONFIG_MODE", "CREATE_IF_NOT_EXIST");

Intent iSetConfig = new Intent();
iSetConfig.setAction("com.symbol.datawedge.api.ACTION");
iSetConfig.putExtra("com.symbol.datawedge.api.SET_CONFIG", bMain);
iSetConfig.putExtra("SEND_RESULT", "LAST_RESULT");
iSetConfig.putExtra("COMMAND_IDENTIFIER", "INTENT_API");
// SetConfig [End]

this.sendBroadcast(iSetConfig);

Set INTENT output

@Override
protected void onCreate(Bundle savedInstanceState) {
    super.onCreate(savedInstanceState);
    setContentView(R.layout.activity_main);
    registerReceivers();
}

@Override
protected void onResume() {
    super.onResume();
    setIntentOutputPluginConfiguration();
}

private void registerReceivers() {
    IntentFilter filter = new IntentFilter();
    filter.addAction("com.symbol.datawedge.api.RESULT_ACTION");
    filter.addCategory("android.intent.category.DEFAULT");
    registerReceiver(datawedgeKeystrokeNIntentStatusBR, filter);
}

private BroadcastReceiver datawedgeKeystrokeNIntentStatusBR = new BroadcastReceiver() {
    @Override
    public void onReceive(Context context, Intent intent) {
        String command = intent.getStringExtra("COMMAND").equals("") ? "EMPTY" : intent.getStringExtra("COMMAND");
        String commandIdentifier = intent.getStringExtra("COMMAND_IDENTIFIER").equals("") ? "EMPTY" : intent.getStringExtra("COMMAND_IDENTIFIER");
        String result = intent.getStringExtra("RESULT").equals("") ? "EMPTY" : intent.getStringExtra("RESULT");

        Bundle bundle;
        String resultInfo = "";
        if (intent.hasExtra("RESULT_INFO")) {
            bundle = intent.getBundleExtra("RESULT_INFO");
            Set<String> keys = bundle.keySet();
            for (String key : keys) {
                resultInfo += key + ": " + bundle.getString(key) + "\n";
            }
        }
        String text ="\n" + "Command:      " + command + "\n" +
                            "Result:       " + result + "\n" +
                            "Result Info:  " + resultInfo + "\n" +
                            "CID:          " + commandIdentifier;
        Log.d("TAG”,text);
    }
};

public void setIntentOutputPluginConfiguration() {

    Bundle bMain = new Bundle();
    Bundle bConfig = new Bundle();
    Bundle bParams = new Bundle();

    bParams.putString("intent_output_enabled","true");
    bParams.putString("intent_action","com.symbol.dwudiusertokens.udi");
    bParams.putString("intent_category","zebra.intent.dwudiusertokens.UDI");
    bParams.putInt("intent_delivery",2); //Use "0" for Start Activity, "1" for Start Service, "2" for Broadcast

    bConfig.putString("PLUGIN_NAME", "INTENT");
    bConfig.putString("RESET_CONFIG","false");
    bConfig.putBundle("PARAM_LIST", bParams);

    bMain.putBundle("PLUGIN_CONFIG", bConfig);
    bMain.putString("PROFILE_NAME","UserProfile");
    bMain.putString("PROFILE_ENABLED","true");
    bMain.putString("CONFIG_MODE","CREATE_IF_NOT_EXIST");

    Intent i = new Intent();
    i.setAction("com.symbol.datawedge.api.ACTION");
    i.putExtra("com.symbol.datawedge.api.SET_CONFIG",bMain);
        i.putExtra("SEND_RESULT","LAST_RESULT");
        // i.putExtra("SEND_RESULT", "true");  // For versions prior to DataWedge 7.1
        i.putExtra("COMMAND_IDENTIFIER", "INTENT_API");
    this.sendBroadcast(i);
}

@Override
protected void onDestroy() {
    super.onDestroy();
    unregisterReceiver(datawedgeKeystrokeNIntentStatusBR);
}

Set/Get result codes

Command and configuration intent parameters determine whether to send result codes (disabled by default). When using SEND_RESULT, the COMMAND_IDENTIFIER is used to match the result code with the originating intent. Sample usage of these parameters is shown below.

Note: This generic code must be modified to match the API being used.

// send the intent
    Intent i = new Intent();
    i.setAction(ACTION);
    i.putExtra("com.symbol.datawedge.api.CREATE_PROFILE", "Profile1");

// request and identify the result code
    i.putExtra("SEND_RESULT","LAST_RESULT");
     // i.putExtra("SEND_RESULT", "true");  // For versions prior to DataWedge 7.1
    i.putExtra("COMMAND_IDENTIFIER","123456789");
    this.sendBroadcast(i);

// register to receive the result
    public void onReceive(Context context, Intent intent){

        String command = intent.getStringExtra("COMMAND");
        String commandidentifier = intent.getStringExtra("COMMAND_IDENTIFIER");
        String result = intent.getStringExtra("RESULT");

        Bundle bundle = new Bundle();
        String resultInfo = "";
        if(intent.hasExtra("RESULT_INFO")){
            bundle = intent.getBundleExtra("RESULT_INFO");
            Set<String> keys = bundle.keySet();
            for (String key: keys) {
                resultInfo += key + ": "+bundle.getString(key) + "\n";
            }
        }

        String text = "Command: "+command+"\n" +
                      "Result: " +result+"\n" +
                      "Result Info: " +resultInfo + "\n" +
                      "CID:"+commandidentifier;

        Toast.makeText(context, text, Toast.LENGTH_LONG).show();

    };

Use the internal imager for scanning

Bundle bConfig = new Bundle();

bConfig.putString("PLUGIN_NAME","BARCODE");

Bundle bParams = new Bundle();
bParams.putString("scanner_input_enabled", "true");
//
// auto or valid scanner identifier:
//
bParams.putString("scanner_selection_by_identifier", "INTERNAL_IMAGER");
bConfig.putBundle("PARAM_LIST",bParams);

Configure an inter-character delay

private Integer ctrlCharacterDelayValue;
private Integer genericCharacterDelayValue;
private Boolean flagExtendedASCIIOnly;

@Override
protected void onCreate(Bundle savedInstanceState) {
    super.onCreate(savedInstanceState);
    setContentView(R.layout.activity_main);

    registerReceivers();
    ctrlCharacterDelayValue = null;
    genericCharacterDelayValue = null;
    flagExtendedASCIIOnly = null;
}

private void registerReceivers() {
    IntentFilter filter = new IntentFilter();
    filter.addAction("com.symbol.datawedge.api.RESULT_ACTION");
    filter.addCategory(Intent.CATEGORY_DEFAULT);
    registerReceiver(broadcastReceiver, filter);
}

@Override
protected void onDestroy() {
    super.onDestroy();
    unregisterReceiver(broadcastReceiver);
}

//Set configuration
public void setKeystrokeOutputPluginConfiguration(View v) {

    Bundle configBundle = new Bundle();
    configBundle.putString("PROFILE_NAME","Profile0 (default)");
    configBundle.putString("PROFILE_ENABLED","true");
    configBundle.putString("CONFIG_MODE","UPDATE");

    Bundle bConfig = new Bundle();

    bConfig.putString("PLUGIN_NAME", "KEYSTROKE");
    Bundle bParams = new Bundle();
    bParams.putString("keystroke_output_enabled","true");
    if(ctrlCharacterDelayValue!=null){
        bParams.putString("keystroke_delay_control_chars",ctrlCharacterDelayValue+"");
    }
    if(genericCharacterDelayValue !=null){
        bParams.putString("keystroke_character_delay", genericCharacterDelayValue +"");
    }
    if(flagExtendedASCIIOnly!=null){
        bParams.putString("keystroke_delay_multibyte_chars_only", flagExtendedASCIIOnly +"");
    }

    bConfig.putBundle("PARAM_LIST", bParams);
    configBundle.putBundle("PLUGIN_CONFIG", bConfig);

    Intent i = new Intent();
    i.setAction("com.symbol.datawedge.api.ACTION");
    i.putExtra("com.symbol.datawedge.api.SET_CONFIG", configBundle);
        i.putExtra("SEND_RESULT","LAST_RESULT");
        // i.putExtra("SEND_RESULT", "true");  // For versions prior to DataWedge 7.1
    i.putExtra("COMMAND_IDENTIFIER", "KEYSTROKE_API");
    this.sendBroadcast(i);
    }

//broadcast receiver
private BroadcastReceiver broadcastReceiver = new BroadcastReceiver() {
    @Override
    public void onReceive(Context context, Intent intent) {
        String action = intent.getAction();
        Log.d(TAG, "#DataWedge-APP# Action: " + action);


    //result of set config
        if(action.equals("com.symbol.datawedge.api.RESULT_ACTION")){
            Bundle extrasBundle = intent.getExtras();
            Set<String> keys = extrasBundle.keySet();
            if(keys!=null&&keys.contains("RESULT")){
                String result = (String)extrasBundle.get("RESULT");
                Log.d(TAG,"Result:"+result);
                //get additional info
                Bundle resultInforBundle = (Bundle) extrasBundle.get("RESULT_INFO");
                Object resultCode = resultInforBundle.get("RESULT_CODE");
                if(resultCode instanceof String){
                    String code = (String)resultCode;
                    Log.d(TAG,"Code:"+code);
                }else if(resultCode instanceof String[]){
                    String[] codesArray = (String[])resultCode;
                    if(codesArray!=null){
                        for(String code : codesArray){
                            Log.d(TAG,"Code:"+code);
                        }
                    }
                }
            }

        }//end result of set config
    }//end onReceive
};

Set configuration for multiple modules (full profile) in a single intent

Support started with DataWedge 7.1. Previous DataWedge versions required multiple intent calls to set configuration for multiple modules (plugins, APP_LIST, and Data Capture Plus).

@Override
protected void onCreate(Bundle savedInstanceState) {
        super.onCreate(savedInstanceState);
        setContentView(R.layout.activity_main);

        IntentFilter filter = new IntentFilter();
        filter.addAction("com.symbol.datawedge.api.RESULT_ACTION");
        filter.addCategory("android.intent.category.DEFAULT");
        registerReceiver(broadcastReceiver, filter);
        setConfig();
}

public void setConfig() {

        /**
        * Setting configuration for:
        * Intent Output Plugin
        * Barcode Input Plugin
        * SimulScan Input Plugin
        * MSR input Plugin
        * IP Output Plugin
        * Tokens for IP Output Plugin
        * Application Association
        * DCP (Data Capture Plus)
        */

        // SetConfig [Start]
        Bundle bMain = new Bundle();

        Bundle bConfigIntent = new Bundle();
        Bundle bParamsIntent = new Bundle();
        bParamsIntent.putString("intent_output_enabled", "true");
        bParamsIntent.putString("intent_action", "com.symbol.dwudiusertokens.udi");
        bParamsIntent.putString("intent_category", "zebra.intent.dwudiusertokens.UDI");
        bParamsIntent.putInt("intent_delivery", 5); //Use "0" for Start Activity, "1" for Start Service, "2" for Broadcast, "3" for start foreground service
        bConfigIntent.putString("PLUGIN_NAME", "INTENT");
        bConfigIntent.putString("RESET_CONFIG", "false");
        bConfigIntent.putBundle("PARAM_LIST", bParamsIntent);

        Bundle bConfigSimulScan = new Bundle();
        Bundle bParamsSimulScan = new Bundle();
        bParamsSimulScan.putString("simulscan_input_enabled", "true");
        bParamsSimulScan.putString("simulscan_input_source", "Imager"); //Supported values: Camera, Imager, Default
        bParamsSimulScan.putString("simulscan_region_separator", "TAB"); //Supported Values:None, TAB, CR, LF, NONE
        bParamsSimulScan.putString("simulscan_log_dir", "/storage/zebra/intent/");
        bParamsSimulScan.putString("simulscan_enable_timestamp", "true");

        Bundle templateParamsBundle = new Bundle();
        templateParamsBundle.putString("dynamic_quantity", "99");
        bParamsSimulScan.putString("simulscan_template", "UserDefinedQuantity.xml"); // Ex:  UserDefinedQuantity.xml, Default - BankCheck.xml, Default - Barcode 1.xml, Default - Barcode 10.xml, Default - Barcode 2.xml, Default - Barcode 4.xml, Default - Barcode 5.xml, Default - BookNumber.xml, Default - DocCap + Optional Barcode.xml, Default - DocCap + Required Barcode.xml, Default - TravelDoc.xml, Default - Unstructured Multi-Line.xml, Default - Unstructured Single Line.xml
        bParamsSimulScan.putBundle("simulscan_template_params",templateParamsBundle);

        bConfigSimulScan.putString("PLUGIN_NAME", "SIMULSCAN");
        bConfigSimulScan.putString("RESET_CONFIG", "false");
        bConfigSimulScan.putBundle("PARAM_LIST", bParamsSimulScan);

        Bundle bConfigBarcode = new Bundle();
        Bundle bParamsBarcode = new Bundle();
        bParamsBarcode.putString("scanner_selection","auto");
        bParamsBarcode.putString("scanner_input_enabled","true");
        bConfigBarcode.putString("PLUGIN_NAME", "BARCODE");
        bConfigBarcode.putString("RESET_CONFIG", "false");
        bConfigBarcode.putBundle("PARAM_LIST", bParamsBarcode);

        Bundle bConfigMSR = new Bundle();
        Bundle bParamsMSR = new Bundle();
        bParamsMSR.putString("msr_input_enabled", "true");
        bConfigMSR.putString("PLUGIN_NAME", "MSR");
        bConfigMSR.putString("RESET_CONFIG", "false");
        bConfigMSR.putBundle("PARAM_LIST", bParamsMSR);

        Bundle bConfigIPOutput = new Bundle();
        Bundle bParamsIPOutput = new Bundle();
        bParamsIPOutput.putString("ip_output_enabled", "true");
        bParamsIPOutput.putString("ip_output_ip_wedge_enabled", "false");
        bParamsIPOutput.putString("ip_output_protocol", "UDP"); //Supported Values: TCP: UDP
        bParamsIPOutput.putString("ip_output_address", "192.168.0.1"); //Supported Values : IP Address format
        bParamsIPOutput.putString("ip_output_port", "55555"); //Supported Values : 1 - 65535

        bConfigIPOutput.putString("PLUGIN_NAME", "IP");
        bConfigIPOutput.putString("RESET_CONFIG", "false");
        bConfigIPOutput.putBundle("PARAM_LIST", bParamsIPOutput);

        Bundle bConfigToken = new Bundle();
        Bundle bParamsToken = new Bundle();

        bParamsToken.putString("send_tokens_option", "BARCODES_TOKENS"); // Supported Values: DISABLED, TOKENS, BARCODES_TOKENS
        bParamsToken.putString("token_separator", "LF"); //Supported Values:None, TAB, CR, LF, NONE
        bParamsToken.putString("multibarcode_separator", "LF"); //Supported Values:None, TAB, CR, LF, NONE

        Bundle tokenOrder_manufacturing_date_original = new Bundle();
        tokenOrder_manufacturing_date_original.putString("name","manufacturing_date_original");
        tokenOrder_manufacturing_date_original.putString("enabled","true");

        Bundle tokenOrder_expiration_date_original = new Bundle();
        tokenOrder_expiration_date_original.putString("name","expiration_date_original");
        tokenOrder_expiration_date_original.putString("enabled","true");

        Bundle tokenOrder_di = new Bundle();
        tokenOrder_di.putString("name","di");
        tokenOrder_di.putString("enabled","true");

        Bundle tokenOrder_lot_number = new Bundle();
        tokenOrder_lot_number.putString("name","lot_number");
        tokenOrder_lot_number.putString("enabled","true");

        Bundle tokenOrder_serial_number = new Bundle();
        tokenOrder_serial_number.putString("name","serial_number");
        tokenOrder_serial_number.putString("enabled","true");

        Bundle tokenOrder_mpho_lot_number = new Bundle();
        tokenOrder_mpho_lot_number.putString("name","mpho_lot_number");
        tokenOrder_mpho_lot_number.putString("enabled","true");

        Bundle tokenOrder_donation_id = new Bundle();
        tokenOrder_donation_id.putString("name","donation_id");
        tokenOrder_donation_id.putString("enabled","true");

        Bundle tokenOrder_labeler_identification_code = new Bundle();
        tokenOrder_labeler_identification_code.putString("name","labeler_identification_code");
        tokenOrder_labeler_identification_code.putString("enabled","true");

        Bundle tokenOrder_product_or_catalog_number = new Bundle();
        tokenOrder_product_or_catalog_number.putString("name","product_or_catalog_number");
        tokenOrder_product_or_catalog_number.putString("enabled","true");

        Bundle tokenOrder_unit_of_measure_id = new Bundle();
        tokenOrder_unit_of_measure_id.putString("name","unit_of_measure_id");
        tokenOrder_unit_of_measure_id.putString("enabled","true");

        Bundle tokenOrder_quantity = new Bundle();
        tokenOrder_quantity.putString("name","quantity");
        tokenOrder_quantity.putString("enabled","false");

        ArrayList<Bundle> tokenOrderList = new ArrayList<>();
        tokenOrderList.add(tokenOrder_manufacturing_date_original);
        tokenOrderList.add(tokenOrder_expiration_date_original);
        tokenOrderList.add(tokenOrder_lot_number);
        tokenOrderList.add(tokenOrder_di);
        tokenOrderList.add(tokenOrder_serial_number);
        tokenOrderList.add(tokenOrder_mpho_lot_number);
        tokenOrderList.add(tokenOrder_donation_id);
        tokenOrderList.add(tokenOrder_labeler_identification_code);
        tokenOrderList.add(tokenOrder_product_or_catalog_number);
        tokenOrderList.add(tokenOrder_unit_of_measure_id);
        tokenOrderList.add(tokenOrder_quantity);

        bParamsToken.putParcelableArrayList("token_order", tokenOrderList);

        bConfigToken.putString("PLUGIN_NAME", "TOKEN");
        bConfigToken.putString("OUTPUT_PLUGIN_NAME","IP");
        bConfigToken.putString("RESET_CONFIG", "true");
        bConfigToken.putBundle("PARAM_LIST", bParamsToken);

        ArrayList<Bundle> bundlePluginConfig = new ArrayList<>();
        bundlePluginConfig.add(bConfigIntent);
        bundlePluginConfig.add(bConfigBarcode);
        bundlePluginConfig.add(bConfigSimulScan);
        bundlePluginConfig.add(bConfigMSR);
        bundlePluginConfig.add(bConfigIPOutput);
        bundlePluginConfig.add(bConfigToken);

        bMain.putParcelableArrayList("PLUGIN_CONFIG", bundlePluginConfig);

        //AppList[Start]
        Bundle bundleApp1 = new Bundle();
        bundleApp1.putString("PACKAGE_NAME", "com.symbol.emdk.simulscansample1");
        bundleApp1.putStringArray("ACTIVITY_LIST", new String[]{
                        "com.symbol.emdk.simulscansample1.DeviceControl",
                        "com.symbol.emdk.simulscansample1.MainActivity",
                        "com.symbol.emdk.simulscansample1.ResultsActivity",
                        "com.symbol.emdk.simulscansample1.ResultsActivity2",
                        "com.symbol.emdk.simulscansample1.SettingsFragment1"});

        Bundle bundleApp2 = new Bundle();
        bundleApp2.putString("PACKAGE_NAME", "com.example.intents.datawedgeintent");
        bundleApp2.putStringArray("ACTIVITY_LIST", new String[]{
                        "com.example.intents.datawedgeintent.DeviceControl",
                        "com.example.intents.datawedgeintent.MainActivity",
                        "com.example.intents.datawedgeintent.ResultsActivity",
                        "com.example.intents.datawedgeintent.SettingsFragment1"});

        Bundle bundleApp3 = new Bundle();
        bundleApp3.putString("PACKAGE_NAME", "com.symbol.pubudu");
        bundleApp3.putStringArray("ACTIVITY_LIST", new String[]{"*"});

        Bundle bundleApp4 = new Bundle();
        bundleApp4.putString("PACKAGE_NAME", "com.symbol.myzebraapp");
        bundleApp4.putStringArray("ACTIVITY_LIST", new String[]{"*"});

        // ADD APP_LIST BUNDLE(S) INTO THE MAIN BUNDLE
        bMain.putParcelableArray("APP_LIST", new Bundle[]{
                        bundleApp1
                        , bundleApp2
                        , bundleApp3
                        , bundleApp4
        });

        // AppList [End]

        Bundle bConfigDCP = new Bundle();
        Bundle bParamsDCP = new Bundle();
        bParamsDCP.putString("dcp_input_enabled", "true");
        bParamsDCP.putString("dcp_dock_button_on", "LEFT"); //Supported values: BOTH - Left or Right, LEFT - Left only, RIGHT - Right only
        bParamsDCP.putString("dcp_start_in", "FULLSCREEN"); //Supported Values: FULLSCREEN, BUTTON, BUTTON_ONLY
        bParamsDCP.putString("dcp_highest_pos", "10"); //Supported Values:  0 - 100
        bParamsDCP.putString("dcp_lowest_pos", "20"); //Supported Values: 0 - 100
        bParamsDCP.putString("dcp_drag_detect_time", "501"); //Supported Values: 0 - 1000
        bConfigDCP.putString("RESET_CONFIG", "true");
        bConfigDCP.putBundle("PARAM_LIST", bParamsDCP);

        bMain.putBundle("DCP", bConfigDCP);

        bMain.putString("PROFILE_NAME", "Profile007");
        bMain.putString("PROFILE_ENABLED", "true");
        bMain.putString("CONFIG_MODE", "CREATE_IF_NOT_EXIST");

        Intent iSetConfig = new Intent();
        iSetConfig.setAction("com.symbol.datawedge.api.ACTION");
        iSetConfig.putExtra("com.symbol.datawedge.api.SET_CONFIG", bMain);
        iSetConfig.putExtra("SEND_RESULT", "COMPLETE_RESULT"); //Supported values: NONE, LAST_RESULT, COMPLETE_RESULT
        iSetConfig.putExtra("COMMAND_IDENTIFIER", "INTENT_API");
        //SetConfig [End]

        this.sendBroadcast(iSetConfig);
}

private BroadcastReceiver broadcastReceiver = new BroadcastReceiver() {
        @Override
        public void onReceive(Context context, Intent intent) {
                String action = intent.getAction();

                String strFinalResult = "";
                String command = intent.getStringExtra("COMMAND");
                String profileName = intent.getStringExtra("PROFILE_NAME");
                String resultInfo = "";

                if (action.equals("com.symbol.datawedge.api.RESULT_ACTION")) {

                        if (intent.hasExtra("RESULT_LIST")) { // returns for COMPLETE_RESULT
                                resultInfo += "ProfileName: " + profileName + "\n";
                                ArrayList<Bundle> result_list = (ArrayList)intent.getSerializableExtra("RESULT_LIST");
                                for (Bundle bundleResult : result_list) {

                                        resultInfo +="\n\n";

                                        Set<String> keys = bundleResult.keySet();
                                        for (String key : keys) {
                                                String val = bundleResult.getString(key);
                                                if (val == null) {

                                                        if (bundleResult.getStringArray(key) != null) {
                                                                val = "";
                                                                for (String s : bundleResult.getStringArray(key)) {
                                                                        val += "" + s + "\n";
                                                                }
                                                        }
                                                }

                                                resultInfo += key + ": " + val + "\n";
                                        }
                                }
                        }

                        if (command != null) {
                                if (command.equalsIgnoreCase("com.symbol.datawedge.api.SET_CONFIG")) {
                                        Log.d("TAG", "#IntentApp# \n\nSetConfig status received:\nResultInfo: \n" + resultInfo);
                                }
                        }
                }
        }
};

Set global scanner configuration

Bundle bConfig = new Bundle();
bConfig.putString("PLUGIN_NAME","BARCODE");

Bundle bParams = new Bundle();
bParams.putString("scanner_input_enabled", "true");
bParams.putString("configure_all_scanners", "true"); // configure for all scanners
bConfig.putBundle("PARAM_LIST", bParams);

Set presentation mode

// MAIN BUNDLE PROPERTIES
Bundle bMain = new Bundle();
bMain.putString("PROFILE_NAME", "Profile1");
bMain.putString("PROFILE_ENABLED", "true");
bMain.putString("CONFIG_MODE", "CREATE_IF_NOT_EXIST");

// PLUGIN_CONFIG BUNDLE PROPERTIES
Bundle bConfig = new Bundle();
bConfig.putString("PLUGIN_NAME", "BARCODE");
bConfig.putString("RESET_CONFIG", "true");

// PARAM_LIST BUNDLE PROPERTIES
Bundle bParams = new Bundle();

bParams.putString("scanner_selection_by_identifier", "INTERNAL_IMAGER");
bParams.putString("scanner_input_enabled" , "true");
bParams.putString("aim_type", "4"); // presentation mode
bParams.putString("scene_detect_qualifier ", "0"); // 0- None and 1- Proximity Sensor Input

…

bConfig.putBundle("PARAM_LIST", bParams);

bMain.putBundle("PLUGIN_CONFIG", bConfig);
Intent i = new Intent();
i.setAction("com.symbol.datawedge.api.ACTION");
i.putExtra("com.symbol.datawedge.api.SET_CONFIG", bMain);
this.sendBroadcast(i); 

Character Set Configuration

// MAIN BUNDLE PROPERTIES 
Bundle bMain = new Bundle(); 
bMain.putString("PROFILE_NAME", "ProfileCharSet"); 
bMain.putString("PROFILE_ENABLED", "true"); 
bMain.putString("CONFIG_MODE", "CREATE_IF_NOT_EXIST"); 

// PLUGIN_CONFIG BUNDLE PROPERTIES 
Bundle bConfig = new Bundle(); 
bConfig.putString("PLUGIN_NAME", "BARCODE"); 
bConfig.putString("RESET_CONFIG", "true"); 

// PARAM_LIST BUNDLE PROPERTIES 
Bundle bParams = new Bundle(); 
bParams.putString("scanner_selection_by_identifier", "INTERNAL_IMAGER"); 
bParams.putString("charset_name", "AUTO"); 
bParams.putString("auto_charset_preferred_order", "GB2312;UTF-8"); 
bParams.putString("auto_charset_failure_option", "UTF-8"); 

bConfig.putBundle("PARAM_LIST", bParams); 
bMain.putBundle("PLUGIN_CONFIG", bConfig);

Intent i = new Intent(); 
i.setAction("com.symbol.datawedge.api.ACTION"); 
i.putExtra("com.symbol.datawedge.api.SET_CONFIG", bMain); 
this.sendBroadcast(i); 

SEE ALSO:

Zebra Support Central | Integrator Guides, Product Manuals, Software Downloads and Support

LaunchPad | Zebra Developer Community

Intent | Android Developers

Intents and Intent Filters | Android Developers

Android Intents | Tutorial