Set Config

DataWedge 7.1

SET_CONFIG

Used to create, update or replace a DataWedge Profile and its settings, and can configure multiple Plug-ins with a single intent action.

This API implements nested bundles, which contain multiple configuration parameters in a single data field.


To create a Profile without configuring its settings parameters, use CREATE_PROFILE.

Version History

  • DataWedge 6.4 - API introduced
  • DataWedge 6.6 - Added support for configuring multiple Plug-ins with a single Action
  • DataWedge 6.7 - Enhanced inter-character delay feature (More info)
  • DataWedge 6.8 - Support for ADF settings:
    • New ADF_RULE bundle with Action, Device, Decoder and Label_ID sub-bundles
    • New result code: RESULT_ACTION_RESULT_CODE_EMPTY_RULE_NAME
  • DataWedge 6.9/7.0 - Added support for Voice Input and Global Scanner Configuration
  • DataWedge 7.1 - New configuration for: full profile (all plugins, APP_LIST, and Data Capture Plus), Data Capture Plus, IP (Internet Protocol), MSR (Magnetic Stripe Reader), Simulscan. New SEND_RESULT result code for multiple plugins.

Function Prototype

Intent i = new Intent();
i.setAction("com.symbol.datawedge.api.ACTION");
i.putExtra("com.symbol.datawedge.api.SET_CONFIG", <mainbundle>);

Parameters

ACTION [String]: "com.symbol.datawedge.api.ACTION"

EXTRA_DATA [String]: "com.symbol.datawedge.api.SET_CONFIG"

BUNDLE: <mainbundle> (see parameters below)

MAIN BUNDLE

The main SET_CONFIG bundle includes the following properties:

  • PROFILE_NAME [String]: The name of the Profile on which to perform action(s)
  • CONFIG_MODE [String]: (Default=OVERWRITE)
    • CREATE_IF_NOT_EXIST: Creates the Profile if string in PROFILE_NAME is not present on device
    • OVERWRITE: If Profile exists, resets all options to default, then configures specified settings
    • UPDATE: Updates only specified settings
  • PROFILE_ENABLED [String]: Optional; Controls whether to enable (true) or disable (false) a Profile (default=true). If not specified, no change is made to the Profile state.
  • PLUGIN_CONFIG [Bundle[ ]]: A bundle array (nested within the main bundle) that contains settings of each Plug-in
  • APP_LIST [Array]: List of applications and/or activities to associate with the Profile
  • Data Capture Plus (DCP) configuration - [String]: Parameters to control DCP configuration

PLUGIN_CONFIG BUNDLE

The PLUGIN_CONFIG bundle is configured using the following properties:

  • RESET_CONFIG [String]: Optional. When used, takes the following values:
    • True (Default) – Clear any existing configuration and create a new configuration with the specified parameter values
    • False – Update the existing values and add values not already in the configuration

PLUGIN_NAME [String]: Name of the Plug-in to configure:

  • BARCODE input
  • SERIAL input
  • DCP (Data Capture Plus) input
  • MSR (Magnetic Stripe Reader) input
  • SIMULSCAN input
  • VOICE input
  • BDF (basic data formatting) processing
  • ADF (advanced data formatting) processing
  • TOKENS (data formatting and ordering for UDI/Multi-barcode data) processing
  • INTENT output
  • KEYSTROKE output
  • IP (Internet Protocol) output

Notes:

  • Plug-in names are case sensitive.
  • For DataWedge 6.5 and below, each intent involving a Plug-in requires a separate intent Action.
  • See tables below for PARAM_LIST values.

PARAM_LIST [Bundle]: A parameter list bundle nested within the PLUGIN_CONFIG bundle. Includes the list of parameters to be updated under the specified Plug-in. Setting an empty string in any parameter value resets that parameter to its default setting.

A visual representation of nested SET_CONFIG bundles. See example code.

PARAM_LIST BUNDLE

The PARAM_LIST bundle is configured by specifying the parameter name and value from the table below. Applies to parameters matching the PLUGIN_NAME specified in PLUGIN_CONFIG bundle.

  • BARCODE – takes a value from the Scanner Input Parameters table below; specify decoder and other input settings as EXTRA_DATA in the PARAM_LIST nested bundle.

    • scanner_selection_by_identifier [string]- takes a value from the list of Scanner Identifiers below.
    • configure_all_scanners [string]- true/false
      If set to “true”, the parameter scanner_selection_by_identifier is ignored and the configuration is saved as a Global Scanner Configuration. If there is any previous configuration for any individual scanners, they will be replaced with the new global configuration.
      If set to "false", the configuration will be saved for the individual selected scanner only. In the event the scanner selection is set to “Auto”, the current default scanner configuration is updated.
  • SERIAL - takes values as indicated below:

    • serial_port_id [string] - 0–n (must be a valid port index)
    • serial_input_enabled [string] - true/false
    • serial_baudrate [string] - 300, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400, 460800 or 921600
    • serial_databits [string] - 7 or 8
    • serial_parity [string] - NONE, ODD, EVEN, MARK or SPACE
    • serial_stopbits [string] - 1 or 2
    • serial_flow [string] - FLOW_NONE, FLOW_RTS_CTS or FLOW_XON_XOFF
  • VOICE - takes values as indicated below:

    • voice_input_enabled [string] - true/false
    • voice_data_capture_start_phrase [string] - start (default value)
    • voice_data_capture_end_phrase [string] - [blank] (default value)
    • voice_tab_command [string] - true/false
    • voice_enter_command [string] - true/false
    • voice_data_type [string] - 0 - Any, 1- Alpha, 2 - Numeric
    • voice_start_phrase_waiting_tone [string] - true/false
    • voice_data_capture_waiting_tone [string] - true/false
    • voice_validation_window [string] - true/false
    • voice_offline_speech [string] - true/false
  • INTENT - takes values as indicated below:

    • intent_output_enabled [string]- true/false
    • intent_action [string] - exact name of the action
    • intent_category [string] - exact name of the category
    • intent_delivery [string]:
      • 0 - Start Activity
      • 1 - Start Service
      • 2 - Broadcast

  • KEYSTROKE - takes a value from the Keystroke Output Parameters table below; specify output settings as EXTRA_DATA in the PARAM_LIST nested bundle.

  • BDF - Applies Basic Data Formatting rules to the acquired data. Takes values:

    • bdf_enabled [string]- true/false

    • bdf_prefix [string]- prepend acquired data

    • bdf_suffix [string]- append acquired data

    • bdf_send_data [string]- true/false

    • bdf_send_hex [string]- true/false

    • bdf_send_tab [string]- true/false

    • bdf_send_enter [string]- true/false

  • ADF - Applies Advanced Data Formatting rules to the acquired data. This bundle contains Action, Device, Decoder and Label_ID sub-bundles, and takes values:

    • adf_enabled [string] – true/false (default=false)

    • ADF_RULE [bundle] - Takes values:

    • name [string] – Name of the ADF rule to use

    • enabled [string] – Rule enabled; true/false (default=true)

    • alldevices [string] – Accept data from all supported input sources; true/false (default=true)

    • string [string] – String to check for (default=empty string)

    • string_pos [string] – String position (default=0)

    • string_len [string] - String length (default=0)

    • ACTIONS [bundle] - Accepts multiple instances. Takes value(s):

      • type [string] - Name of Action from ADF Actions table
      • action_param_1, action_param_2... (as determined by ADF Action; see table)
    • DEVICES [bundle] - Accepts multiple instances. Takes values:

      • device_id [string] - Name of the input source: BARCODE, MSR, SIMULSCAN or SERIAL
      • enabled [string] - Accept data from specified device ID: true/false (default=true)
      • alldecoders [string] - Allow all barcode symbologies: true/false (default=true)
      • all_label_ids [string] - Allow all UDI label IDs: true/false (default=true)
    • DECODERS [bundle] - Accepts multiple instances. Takes values:

      • device_id [string] - BARCODE, MSR, SERIAL or SIMULSCAN
      • decoder [string] - (i.e. "Australian Postal")
      • enabled [string] - true/false (default=true)
    • LABEL_IDS [bundle] - Accepts multiple instances. Takes values:

      • device_id [string] - BARCODE, MSR, SERIAL or SIMULSCAN

    • label_id [string] - UDI_GS1, UDI_HIBCC or UDI_ICCBBA
    • enabled [string] - true/false (default=true)

IMPORTANT:

  • If a Profile is created without at least one Rule, DataWedge creates a "Rule0" with a single action to "SEND_REMAINING" data without modification.
  • If values in one or more newly created Rules are missing or invalid, DataWedge uses default values.
  • To update one or more Actions in an existing Profile using an intent, all Actions in the Profile must be included in the intent.

ADF ACTIONS

Category Action Type
Parameter(s) (if any)
Description

Cursor Movement

SKIP_AHEAD
action _param_1

Moves the cursor forward by the specified number of characters (default=1)

SKIP_BACK
action _param_1

Moves the cursor back by the specified number of characters (default=1)

SKIP_TO_START

Moves the cursor to the beginning of the data

MOVE_AHEAD_TO
action_param_1

Known as "Move to" in the DataWedge UI, advances the cursor until the specified string is found

MOVE_PAST_A
action_param_1

Moves the cursor forward past the specified string

Data Modification

CRUNCH_SPACES

Reduces spaces between words to one, and removes all spaces at the beginning and end of the data

STOP_CRUNCH_SPACE

Disables the last Crunch spaces action

REMOVE_SPACES

Known as "Remove all spaces" in the DataWedge UI, removes all spaces in the data

STOP_REMOVE_SPACES

Disables the last REMOVE_SPACES action

TRIM_LEFT_ZEROS

Known as "Remove leading zeros" in the DataWedge UI, removes all zeros at the beginning of the data

STOP_TRIM_LEFT_ZEROS

Disables the previous TRIM_LEFT_ZEROS action

PAD_LEFT_ZEROS
action_param_1

Known as "Pad with zeros" in the DataWedge UI, left-pads the data with the specified number of zeros (default=0)

STOP_PAD_LEFT_ZEROS

Disables the previous PAD_LEFT_ZEROS action

PAD_LEFT_SPACES
action_param_1

Known as "Pad with spaces" in the DataWedge UI, left-pads the data with the specified number of spaces (default=0)

STOP_PAD_LEFT_SPACES

Disables the previous PAD_LEFT_SPACES action

REPLACE_STRING
action_param_1
action_param_2

Replaces a specified string (action_param_1) with a new specified string (action_param_2). Both must be specified (default=empty)

STOP_REPLACE_ALL

Known as "Stop all replace string" in the DataWedge UI, stops all REPLACE_STRING actions

REMOVE_CHARACTERS
action_param_1
action_param_2
action_param_3

Removes the number of characters specified in given positions when send actions are executed
action_param_1: (0=front (default); 1=in between; 2=end; 3=center)
action_param_2: start position (default=0)
action_param_3: number of characters (default=0)

STOP_REMOVE_CHARS

Stops removing characters from subsequent send actions

Data Sending

SEND_NEXT
action_param_1

Sends the specified number of characters from the current cursor position (default=0)

SEND_REMAINING

Sends all data that remains from the current cursor position

SEND_UP_TO
action_param_1

Sends all data up to the specified string

DELAY

Known as "Send pause" in the DataWedge UI, pauses the specified number of milliseconds (default = 0; max. = 120000) before executing the next action. Zebra recommends pausing 50 ms after sending any ENTER, LINE FEED or TAB character.

SEND_STRING
action_param_1

Sends the specified string

SEND_CHAR
action_param_1

Sends the specified ASCII/ Unicode character. The maximum Unicode character value is U-10FFFF (1114111 in decimal)

Notes:

  • Default action_param values are 0, empty or none unless otherwise noted.
  • To help minimize data loss, Zebra recommends sending a DELAY of 50 ms after sending any ENTER, LINE FEED or TAB character.

APP_LIST

An array of bundles that contains a set of PACKAGE_NAMES and an ACTIVITY_LIST to be associated with the Profile.

APP_LIST BUNDLE

Contains the following properties:

PACKAGE_NAME [String]: ex: "com.symbol.emdk.barcodesample1" or a wildcard (*) character

ACTIVITY_LIST [List]: A list of activities for the PACKAGE_NAME. Wildcard (*) character also supported.


Scanner Identifiers

The scanner identifier (introduced in DataWedge 6.5) permits scanners to be identified by a friendly name rather than an index number.

SCANNER_IDENTIFIER [String]: Present in each scanner info bundle for each scanner supported in the device. Index and identifier parameters are both supported in DataWedge and higher; the scanner identifier value takes precedence if an index also is referenced in the code.

Possible values:

  • AUTO - Automatic scanner selection
  • INTERNAL_IMAGER - Built-in imager scanner
  • INTERNAL_LASER - Built-in laser scanner
  • INTERNAL_CAMERA - Built-in camera scanner
  • SERIAL_SSI - Pluggable Z-back scanner for ET50/ET55
  • BLUETOOTH_SSI - RS507 Bluetooth scanner
  • BLUETOOTH_RS6000 - RS6000 Bluetooth scanner
  • BLUETOOTH_DS2278 - DS2278 Bluetooth scanner
  • BLUETOOTH_DS3678 - DS3678 Bluetooth scanner
  • PLUGABLE_SSI - Serial SSI scanner RS429 (for use with WT6000)
  • PLUGABLE_SSI_RS5000 - Serial SSI scanner RS5000 (for use with WT6000)
  • USB_SSI_DS3608 - DS3608 pluggable USB scanner

Result Codes

DataWedge returns the following error codes if the app includes the intent extras RECEIVE_RESULT and COMMAND_IDENTIFIER to enable the app to get results using the DataWedge result intent mechanism. See Example, below.

  • PLUGIN_NOT_SUPPORTED - An attempt was made to configure a plug-in that is not supported by DataWedge intent APIs
  • BUNDLE_EMPTY - The bundle contains no data
  • PROFILE_NAME_EMPTY - An attempt was made to configure a Profile name with no data
  • PROFILE_NOT_FOUND - An attempt was made to perform an operation on a Profile that does not exist
  • PLUGIN_BUNDLE_INVALID - A passed plug-in parameter bundle is empty or contains insufficient information
  • PARAMETER_INVALID - The passed parameters were empty, null or invalid
  • APP_ALREADY_ASSOCIATED - An attempt was made to associate an app that was already associated with another Profile
  • OPERATION_NOT_ALLOWED - An attempt was made to rename or delete a protected Profile or to associate an app with Profile0
  • RESULT_ACTION_RESULT_CODE_EMPTY_RULE_NAME - Rule name empty or undefined in ADF_RULE bundle

Also see the Result Codes guide for more information.

Return Values

Error and debug messages are logged to the Android logging system, which can be viewed and filtered by the logcat command. Use logcat from an ADB shell to view the log messages:


$ adb logcat -s DWAPI

Error messages are logged for invalid actions and parameters


Scanner Input Parameters

Important: Support for decode parameters can vary depending on the selected scanning device. For device-specific support notes, please refer to the Integrator Guide that accompanied the unit.

All parameters are case sensitive.

Decoders Decoder State Decoder Parameters Parameter Values
decoder_code11 True
False
decoder_code11_length1
decoder_code11_length2
Integer from 0–55
decoder_code11_redundancy
decoder_code11_report_check_digit
True
False
decoder_code11_verify_check_digit 0 - No Check Digit
1 - 1 Check Digit
2 - 2 Check Digits
decoder_code128 True
False
decoder_code128_length1
decoder_code128_length2
Integer from 0–55
decoder_code128_redundancy
decoder_code128_enable_plain
decoder_code128_enable_ean128
decoder_code128_enable_isbt128
decoder_code128_check_isbt_table
True
False
decoder_code128_isbt128_concat_mode 0 - Concat Mode Never
1 - Concat Mode Always
2 - Concat Mode Auto
decoder_code128_security_level 0 - Security Level 0
1 - Security Level 1
2 - Security Level 2
3 - Security Level 3
decoder_code128_enable_marginless_decode True
False
decoder_code128_ignore_fnc4 True
False
decoder_code39 True
False
decoder_code39_length1
decoder_code39_length2
Integer from 0–55
decoder_code39_verify_check_digit
decoder_code39_report_check_digit
decoder_code39_full_ascii
decoder_code39_redundancy
decoder_code39_convert_to_code32
decoder_code39_report_code32_prefix
decoder_code39_enable_marginless_decode
True
False
decoder_code39_security_level 0 - Security Level 0
1 - Security Level 1
2 - Security Level 2
3 - Security Level 3
decoder_ean13 True
False
N/A N/A
decoder_ean8 True
False
decoder_ean8_convert_to_ean13 True
False
decoder_korean_3of5 True
False
N/A N/A
decoder_chinese_2of5 True
False
N/A N/A
decoder_d2of5 True
False
decoder_d2of5_length1
decoder_d2of5_length2
Integer from 0–55
decoder_d2of5_redundancy True
False
decoder_trioptic39 True
False
decoder_trioptic39_redundancy True
False
decoder_code93 True
False
decoder_code93_length1
decoder_code93_length2
Integer from 0–55
decoder_code93_redundancy True
False
decoder_msi True
False
decoder_msi_length1
decoder_msi_length1
Integer from 0–55
decoder_msi_redundancy
decoder_msi_report_check_digit
True
False
decoder_msi_check_digit 0- 1 Check Digit
1 - 2 Check Digits
decoder_msi_check_digit_scheme 0 - Mod-11-10
1 - Mod-10-10
decoder_codabar True
False
decoder_codabar_length1
decoder_codabar_length2
Integer from 0–55
decoder_codabar_redundancy
decoder_codabar_clsi_editing
decoder_codabar_notis_editing
True
False
decoder_upce0 True
False
decoder_upce0_report_check_digit True
False
decoder_upce0_preamble 0 - Preamble None
1 - Preamble Sys Char
2 - Preamble Country and Sys Char
decoder_upce0_convert_to_upca True
False
decoder_upce1 True
False
decoder_upce1_report_check_digit
decoder_upce1_convert_to_upca
True
False
decoder_upce1_preamble 0 - Preamble None
1 - Preamble Sys Char
2 - Preamble Country and Sys Char
decoder_upca True
False
decoder_upca_report_check_digit True
False
decoder_upca_preamble 0 - Preamble None
1 - Preamble Sys Char
2 - Preamble Country and Sys Char
decoder_us4state True
False
decoder_us4state_fics True
False
decoder_tlc39 True
False
N/A N/A
decoder_mailmark True
False
N/A N/A
decoder_hanxin True
False
decoder_hanxin_inverse 0 - Disable
1 - Enable
2 - Auto
decoder_signature True
False
N/A N/A
decoder_webcode True
False
N/A N/A
decoder_matrix_2of5 True
False
decoder_matrix_2of5_length1
decoder_matrix_2of5_length2
Integer from 0–55
decoder_matrix_2of5_redundancy
decoder_matrix_2of5_report_check_digit
decoder_matrix_2of5_verify_check_digit
True
False
decoder_i2of5 True
False
decoder_i2of5_length1
decoder_i2of5_length2
Integer from 0–55
decoder_i2of5_redundancy
decoder_i2of5_report_check_digit
decoder_i2of5_report_check_digit
decoder_i2of5_convert_to_ean13
i20f5_enable_marginless_decode
True
False
decoder_i2of5_check_digit 0 - No Check Digit
1 - USS Check Digit
2 - OPCC Check Digit
decoder_i2of5_security_level 0 - Security Level 0
1 - Security Level 1
2 - Security Level 2
3 - Security Level 3
decoder_gs1_databar True
False
decoder_gs1_databar_lim
decoder_gs1_databar_exp
True
False
decoder_datamatrix True
False
N/A N/A
decoder_qrcode True
False
N/A N/A
decoder_gs1_datamatrix N/A N/A N/A
decoder_gs1_qrcode N/A N/A N/A
decoder_pdf417 True
False
N/A N/A
decoder_pdf417 True
False
N/A N/A
decoder_composite_ab True
False
decoder_composite_ab_ucc_link_mode 0 - Link Flag Ignored
1 - Always Linked
2 - Auto Discriminate
decoder_composite_c True
False
N/A N/A
decoder_microqr True
False
N/A N/A
decoder_aztec True
False
N/A N/A
decoder_maxicode True
False
N/A N/A
decoder_micropdf True
False
N/A N/A
decoder_uspostnet True
False
N/A N/A
decoder_usplanet True
False
decoder_usplanet_report_check_digit True
False
decoder_australian_postal true
false
N/A N/A
decoder_uk_postal True
False
decoder_uk_postal_report_check_digit True
False
decoder_japanese_postal True
False
N/A N/A
decoder_canadian_postal True
False
N/A N/A
decoder_dutch_postal True
False
N/A N/A
decoder_gs1_lim_security_level 1 - Security Level 1
2 - Security Level 2
3 - Security Level 3
4 - Security Level 4
N/A N/A
Upcean_security_level 0 - Level 0
1 - Level 1
2 - Level 2
3 - Level 3
N/A N/A
upcean_supplemental2 True
False
N/A N/A
upcean_supplemental5 True
False
N/A N/A
upcean_supplemental_mode 0 - No Supplementals
1 - Supplemental Always
2 - Supplemental Auto
3 - Supplemental Smart
4 - Supplemental 378-379
5 - Supplemental 978-979
6 - Supplemental 414-419-434-439
7 - Supplemental 977
N/A N/A
upcean_retry_count Integer from 2 to 20 N/A N/A
upcean_random_weight_check_digit True
False
N/A N/A
upcean_linear_decode True
False
N/A N/A
upcean_bookland True
False
N/A N/A
upcean_coupon True
False
N/A N/A
upcean_coupon_report 0 - Old Coupon Report Mode
1 - New Coupon Report Mode
2 - Both Coupon Report Modes
N/A N/A
upcean_ean_zero_extend True
False
N/A N/A
upcean_bookland_format 0 - Format ISBN-10
1 - Format ISBN-13
N/A N/A


UDI Parameters

For more information, see Barcode Input.

Parameter Name Parameter Value
enable_udi_gs1 true
false
enable_udi_hibcc true
false
enable_udi_iccbba true
false

Other Scanner Input Parameters:

Parameter Name Parameter Value
barcode_trigger_mode 0 - Disabled
1 - Enabled
More info
auto_switch_to_default_on_event 0 - Disabled
1 - On connect
2 - On disconnect
3 - On connect/disconnect
More info
digimarc_decoding True
False
scanning_mode 1 - Single
2 - UDI
3 - MultiBarcode
multi_barcode_count Integer from 2–10
True
False
scanner_selection_by_identifier See Scanner Identifiers table
trigger-wakeup True
False
scanner_input_enabled True
False
scanner_selection auto
0-n (valid scanner index from ENUMERATE_SCANNERS API)
databar_to_upc_ean True
False
upc_enable_marginless_decode True
False
aim_mode on - On
off - Off
beam_timer Integer from 0–60000
Adaptive_Scanning 0 - Enable
1 - Disable
Beam_Width 0 - Narrow
1 - Normal
2 - Wide
power_mode 0 - Low Power Mode
1 - Optimized Power Mode
2 - High Power Mode
3 - Always On
mpd_mode 0 - Disable Mobile Phone Display Mode
3 - Enable Mobile Phone Display Mode
reader_mode 0 - Triggered Mode
7 - Presentation Mode
linear_security_level 1 - Security Short Or Codabar
2 - Security All Twice
3 - Security Long And Short
4 - Security All Thrice
picklist 0 - Disabled
1 – Enabled/HW picklist
2 – Software Picklist
aim_type 0 - Trigger
1 - Timed Hold
2 - Timed Release
3 - Press And Release
4 - Presentation *For future use only*
5 - Continuous Read
6 - Press and Sustain
scene_detect_qualifier
*For future use only*
0 - None
1 - Proximity Sensor Input
aim_timer Integer from 0–60000
same_barcode_timeout Integer from 0–5000
different_barcode_timeout Integer from 0–5000
illumination_mode off - Off
torch - On
cd_mode 0 - Disabled
3 - Enabled
low_power_timeout Integer from 0–1000
delay_to_low_power_mode 16 - 1 Second
29 - 30 Seconds
32 - 1 Minute
37 - 5 Minutes
illumination_brightness Integer from 0–10
inverse_1d_mode 0 - Disable
1 - Enable
2 - Auto
viewfinder_size Integer from 0–100
viewfinder_posx Integer from 0–100
viewfinder_posy Integer from 0–100
1d_marginless_decode_effort_level 0 - Level 0
1 - Level 1
2 - Level 2
3 - Level 3
poor_quality_bcdecode_effort_level 0 - Level 0
1 - Level 1
2 - Level 2
3 - Level 3
charset_name ISO-8859-1 - ISO-8859-1
Shift_JIS - Shift_JIS
UTF-8 - UTF-8
viewfinder_mode 1 - Viewfinder Enabled
2 - Static Reticle
code_id_type 0 - Code Id Type None
1 - Code Id Type Aim
2 - Code Id Type Symbol
volume_slider_type 0 - Ringer
1 - Music and Media
2 - Alarms
3 - Notification
decode_audio_feedback_uri URI – Can be a query of the available URIs from RingToneManager
decode_haptic_feedback True
False
bt_disconnect_on_exit True
False
connection_idle_time Integer from 0–1800
establish_connection_time Integer from 30–60
remote_scanner_audio_feedback_mode Integer from 0–3
remote_scanner_led_feedback_mode Integer from 0–3
display_bt_address_barcode True
False
good_decode_led_timer Integer from 0–1000
decoding_led_feedback True
False
decoder_usplanet_report_check_digit True
False
decode_screen_notification True
False
keep_pairing_info_after_reboot Enable/disable automatic re-connection to the connected Bluetooth scanner after device reboot. Applies only to connected Bluetooth scanners:

0 - Disable
1 - Enable

Serial Input Parameters

Important: Support for serial parameters varies by device. For device-specific support notes, please refer to the Integrator Guide that accompanied the unit.

All parameters are case sensitive.

Param name

Param values

serial_port_id

0–n (must be a valid index)

serial_input_enabled

false

true

serial_baudrate

300, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400, 460800 or 921600

serial_databits

7 or 8

serial_parity

NONE, ODD, EVEN, MARK or SPACE

serial_stopbits

1 or 2

serial_flow

FLOW_NONE, FLOW_RTS_CTS or FLOW_XON_XOFF


Simulscan Input Parameters

All parameters are case sensitive.

Parameter Parameter Value
simulscan_input_enabled True
False
simulscan_input_source Camera
Imager
Default
simulscan_template Examples of available templates:
  Default - BankCheck.xml
  Default - Barcode 1.xml
  Default - Barcode 10.xml
  Default - Barcode 2.xml
  Default - Barcode 4.xml
  Default - Barcode 5.xml
  Default - BookNumber.xml
  Default - DocCap + Optional Barcode.xml
  Default - DocCap + Required Barcode.xml
  Default - TravelDoc.xml
  Default - Unstructured Multi-Line.xml
  Default - Unstructured Single Line.xml
simulscan_template_params [param name] [param value]
Note: Text in brackets[] to be replaced with designated text, e.g. dynamic quantity    9
simulscan_region_separator TAB
CR
LF
NONE
simulscan_log_dir [Valid path]
simulscan_enable_timestamp True
False

Data Capture Plus (DCP) Input Parameters

All parameters are case sensitive.

Parameter Parameter Value Description
dcp_input_enabled True
False
Enable/Disable DCP input
dcp_dock_button_on LEFT - Left only
RIGHT - Right only
BOTH - Left or Right
Position location for dock button: left side, right side, either right or left side (both)
dcp_start_in FULLSCREEN
BUTTON
BUTTON_ONLY
Sets the mode that DCP will startup with: full screen, button (floating button that can be re-positioned by dragging and dropping), and button only (cannot be re-positioned)
dcp_highest_pos 0-100 Sets a ceiling for button position expressed as a percentage of total screen height. For example, on a screen measuring four inches vertically, a setting of 75 (%) would prevent the upper edge of the DCP button from being positioned less than one inch from the top of the screen.
dcp_lowest_pos 0-100 Sets a floor for button position expressed as a percentage of total screen height. For example, on a screen measuring four inches vertically, a setting of 25 (%) would prevent the lower edge of the DCP button from being positioned less than one inch from the bottom of the screen.
dcp_drag_detect_time 0-1000 Wait time (in ms) that DCP should wait after a screen tap before triggering a scanner action. This can help prevent accidental triggers when dragging the DCP button to a new location.


See DCP Input.


MSR (Magnetic Stripe) Input Parameters

All parameters are case sensitive.

Parameter Parameter Value
msr_input_enabled True
False

Keystroke Output Parameters

All parameters are case sensitive.

Param name

Param values

keystroke_output_enabled

false

true

keystroke_action_char

NONE - ASCII_NO_VALUE

TAB - ASCII_TAB_VALUE

LF - ASCII_LF_VALUE

CR - ASCII_CR_VALUE

keystroke_delay_extended_ascii
(deprecated)

Integer from 0–1000

keystroke_delay_control_chars

Integer from 0–1000

keystroke_character_delay

Integer from 0–1000

keystroke_delay_multibyte_chars_only

false

true

Keystroke Delay Notes

  • The keystroke_delay_extended_ascii parameter is deprecated.
  • If a Keystroke Plug-in bundle uses the keystroke_delay_extended_ascii parameter, DataWedge sets the keystroke_delay_multibyte_chars_only parameter to true.
  • If both the keystroke_delay_extended_ascii and keystroke_character_delay parameters are sent:
    • The keystroke_character_delay value is retained.
    • The keystroke_delay_extended_ascii value is ignored.
    • If available, the keystroke_delay_multibyte_chars_only value is saved; it is otherwise considered false.

IP (Internet Protocol) Output Parameters

All parameters are case sensitive.

Parameter Name Parameter Value
ip_output_enabled True
False
ip_output_ip_wedge_enabled True
False
ip_output_protocol TCP
UDP
ip_output_address [Valid IP Address format]
ip_output_port 1 – 65535

TOKEN Parameters

Applicable for UDI or multibarcodes.

All parameters are case sensitive.

Parameter Name Parameter Value
send_tokens_option DISABLED
TOKENS
BARCODES_TOKENS
token_separator TAB
CR
LF
NONE
multibarcode_separator TAB
CR
LF
NONE
token_order name: manufacturing_date_original
enabled: True/False

name: expiration_date_original
enabled: True/False

name: di
enabled: True/False
(Note: "di" stands for device identifier.)

name: lot_number
enabled: True/False

name: serial_number
enabled: True/False

name: mpho_lot_number
enabled: True/False

name: donation_id
enabled: True/False

name: labeler_identification_code
enabled: True/False

name: product_or_catalog_number
enabled: True/False

name: unit_of_measure_id
enabled: True/False

name: quantity
enabled: True/False

* DataWedge determines the priority order according to the order of items listed in the ArrayList, with Element 0 having the highest priority.


See UDI Data Output in IP Output or Keystroke Output


Example Code

Nested bundles

// MAIN BUNDLE PROPERTIES
    Bundle bMain = new Bundle();
    bMain.putString("PROFILE_NAME","Profile12");            // <- "Profile12" is a bundle
    bMain.putString("PROFILE_ENABLED","true");              // <- that will be enabled
    bMain.putString("CONFIG_MODE","CREATE_IF_NOT_EXIST");   // <- or created if necessary.

// PLUGIN_CONFIG BUNDLE PROPERTIES
    Bundle bConfig = new Bundle();
    bConfig.putString("PLUGIN_NAME","BARCODE");
    bConfig.putString("RESET_CONFIG","true"); 


// PARAM_LIST BUNDLE PROPERTIES
    Bundle bParams = new Bundle();
    bParams.putString("scanner_selection","auto");
    bParams.putString("scanner_input_enabled","true");
// 
// NOTE: The "scanner_selection" parameter (above) supports "auto" selection
// --OR-- the assignment of a scanner device index, which is obtained by 
// using the ENUMERATE_SCANNERS API.  
//
//      Syntax for scanner index:
//
//              Bundle bParams = new Bundle();
//      diff--> bParams.putString("current-device-id","0");
//              bParams.putString("scanner_input_enabled","true");
//
// 
// NEST THE BUNDLE "bParams" WITHIN THE BUNDLE "bConfig"
    bConfig.putBundle("PARAM_LIST", bParams);

// THEN NEST THE "bConfig" BUNDLE WITHIN THE MAIN BUNDLE "bMain"
    bMain.putBundle("PLUGIN_CONFIG", bConfig);

// CREATE APP_LIST BUNDLES (apps and/or activities to be associated with the Profile)
    Bundle bundleApp1 = new Bundle();
    bundleApp1.putString("PACKAGE_NAME","com.symbol.emdk.simulscansample1");
    bundleApp1.putStringArray("ACTIVITY_LIST", new String[]{
            "com.symbol.emdk.simulscansample1.DeviceControl",
            "com.symbol.emdk.simulscansample1.MainActivity",
            "com.symbol.emdk.simulscansample1.ResultsActivity.*",
            "com.symbol.emdk.simulscansample1.ResultsActivity2",
            "com.symbol.emdk.simulscansample1.SettingsFragment1"});

    Bundle bundleApp2 = new Bundle();
    bundleApp2.putString("PACKAGE_NAME","com.example.intents.datawedgeintent");
    bundleApp2.putStringArray("ACTIVITY_LIST", new String[]{
            "com.example.intents.datawedgeintent.DeviceControl",
            "com.example.intents.datawedgeintent.MainActivity",
            "com.example.intents.datawedgeintent.ResultsActivity",
            "com.example.intents.datawedgeintent.SettingsFragment1"});

    Bundle bundleApp3 = new Bundle();
    bundleApp3.putString("PACKAGE_NAME","*");
    bundleApp3.putStringArray("ACTIVITY_LIST", new String[]{"*"});

    Bundle bundleApp4 = new Bundle();
    bundleApp4.putString("PACKAGE_NAME","com.symbol.myzebraapp");
    bundleApp4.putStringArray("ACTIVITY_LIST", new String[]{"*"});

// NEXT APP_LIST BUNDLE(S) INTO THE MAIN BUNDLE
    bMain.putParcelableArray("APP_LIST", new Bundle[]{
            bundleApp1
            ,bundleApp2
            ,bundleApp3
            ,bundleApp4
    });

    Intent i = new Intent();
    i.setAction("com.symbol.datawedge.api.ACTION");
    i.putExtra("com.symbol.datawedge.api.SET_CONFIG", bMain);

    this.sendBroadcast(i);

Set serial input configuration

//
// Port 1 Configuration [Start]
//
Bundle bPort1 = new Bundle();
bPort1.putString("serial_port_id", "0"); //Supported Values: 0,1
bPort1.putString("serial_input_enabled", "true"); // Supported Values: true, false
bPort1.putString("serial_baudrate", "1200"); // Supported Values (some): 300, 1200, 2400, 4800, 19200, and more
bPort1.putString("serial_databits", "8"); //Supported Values: 8, 7
bPort1.putString("serial_parity", "ODD"); //Supported Values: NONE, ODD, EVEN, MARK, SPACE
bPort1.putString("serial_stopbits", "1"); //Supported Values: 1, 2
bPort1.putString("serial_flow", "FLOW_RTS_CTS"); //Supported Values: FLOW_NONE, FLOW_RTS_CTS, FLOW_DSR_DTR, FLOW_XON_XOFF
//
// Port 1 Configuration [End]
//
// Port 2 Configuration [Start]
//
Bundle bPort2 = new Bundle();
bPort2.putString("serial_port_id", "1");
bPort2.putString("serial_input_enabled", "true");
bPort2.putString("serial_baudrate", "300");
bPort2.putString("serial_databits", "7");
//bPort2.putString("abc", "123");
bPort2.putString("serial_stopbits", "2");
bPort2.putString("serial_flow", "FLOW_DSR_DTR");
bPort2.putString("serial_parity", "EVEN");
//
// Port 2 Configuration [End]
//
Bundle bConfig = new Bundle();
bConfig.putString("RESET_CONFIG", "false");
bConfig.putString("PLUGIN_NAME", "SERIAL");
bConfig.putParcelableArray("DEVICE_LIST", new Bundle[]{
        bPort1, bPort2
});

Bundle bMain = new Bundle();
bMain.putString("PROFILE_NAME", "Profile0 (default)");
bMain.putString("CONFIG_MODE", "UPDATE");
bMain.putBundle("PLUGIN_CONFIG", bConfig);

Intent i = new Intent();
i.setAction("com.symbol.datawedge.api.ACTION");
i.putExtra("com.symbol.datawedge.api.SET_CONFIG", bMain);
i.putExtra("SEND_RESULT","LAST_RESULT");
// i.putExtra("SEND_RESULT", "true");  // For versions below DataWedge 7.1
i.putExtra("com.symbol.datawedge.api.RESULT_CATEGORY", DEFAULT_CATEGORY);
i.putExtra("COMMAND_IDENTIFIER", "DW_SERIAL_COMMAND");

this.sendBroadcast(i);

Set Simulscan input configuration

// SetConfig [Start]
Bundle bMain = new Bundle();

Bundle bConfigSimulScan = new Bundle();
Bundle bParamsSimulScan = new Bundle();
bParamsSimulScan.putString("simulscan_input_enabled", "true");
bParamsSimulScan.putString("simulscan_input_source", "Imager"); //Supported values: Camera, Imager, Default
bParamsSimulScan.putString("simulscan_region_separator", "TAB"); //Supported Values:None, TAB, CR, LF, NONE
bParamsSimulScan.putString("simulscan_log_dir", "/storage/zebra/intent/");
bParamsSimulScan.putString("simulscan_enable_timestamp", "true");
bParamsSimulScan.putString("simulscan_template", "UserDefinedQuantity.xml"); 
// Ex:  UserDefinedQuantity.xml, Default - BankCheck.xml, Default - Barcode 1.xml, Default - Barcode 10.xml, Default - Barcode 2.xml, Default - Barcode 4.xml, Default - Barcode 5.xml, Default - BookNumber.xml, Default - DocCap + Optional Barcode.xml, Default - DocCap + Required Barcode.xml, Default - TravelDoc.xml, Default - Unstructured Multi-Line.xml, Default - Unstructured Single Line.xml

//Setting dynamic template params
Bundle templateParamsBundle = new Bundle();
templateParamsBundle.putString("dynamic_quantity", "100");
bParamsSimulScan.putBundle("simulscan_template_params",templateParamsBundle); 
// This param will work only for the templates that have dynamic params. For others, this will throw PARAMETER_NOT_SUPPORTED

bConfigSimulScan.putString("PLUGIN_NAME", "SIMULSCAN");
bConfigSimulScan.putString("RESET_CONFIG", "true");
bConfigSimulScan.putBundle("PARAM_LIST", bParamsSimulScan);

ArrayList<Bundle> bundlePluginConfig = new ArrayList<>();
bundlePluginConfig.add(bConfigSimulScan);
bMain.putParcelableArrayList("PLUGIN_CONFIG", bundlePluginConfig);

bMain.putString("PROFILE_NAME", "Profile007");
bMain.putString("PROFILE_ENABLED", "true");
bMain.putString("CONFIG_MODE", "CREATE_IF_NOT_EXIST");

Intent iSetConfig = new Intent();
iSetConfig.setAction("com.symbol.datawedge.api.ACTION");
iSetConfig.putExtra("com.symbol.datawedge.api.SET_CONFIG", bMain);
iSetConfig.putExtra("SEND_RESULT", "LAST_RESULT");
iSetConfig.putExtra("COMMAND_IDENTIFIER", "INTENT_API");
// SetConfig [End]

this.sendBroadcast(iSetConfig);

Set DCP input configuration

//SetConfig [Start] 
Bundle bMain = new Bundle(); 

Bundle bConfigDCP = new Bundle(); 
Bundle bParamsDCP = new Bundle(); 
bParamsDCP.putString("dcp_input_enabled", "true"); 
bParamsDCP.putString("dcp_dock_button_on", "LEFT"); //Supported values: BOTH - Left or Right, LEFT - Left only, RIGHT - Right only 
bParamsDCP.putString("dcp_start_in", "FULLSCREEN"); //Supported Values: FULLSCREEN, BUTTON, BUTTON_ONLY 
bParamsDCP.putString("dcp_highest_pos", "30"); //Supported Values:  0 - 100, Highest pos can not be greater than lowest pos 
bParamsDCP.putString("dcp_lowest_pos", "40"); //Supported Values: 0 - 100, Highest pos can not be greater than lowest pos 
bParamsDCP.putString("dcp_drag_detect_time", "501"); //Supported Values: 0 - 1000 
bConfigDCP.putString("RESET_CONFIG", "false"); 
bConfigDCP.putBundle("PARAM_LIST", bParamsDCP); 

bMain.putBundle("DCP", bConfigDCP); 

bMain.putString("PROFILE_NAME", "Profile007"); 
bMain.putString("PROFILE_ENABLED", "true"); 
bMain.putString("CONFIG_MODE", "CREATE_IF_NOT_EXIST"); 

Intent iSetConfig = new Intent(); 
iSetConfig.setAction("com.symbol.datawedge.api.ACTION"); 
iSetConfig.putExtra("com.symbol.datawedge.api.SET_CONFIG", bMain); 
iSetConfig.putExtra("SEND_RESULT", "LAST_RESULT"); 
iSetConfig.putExtra("COMMAND_IDENTIFIER", "INTENT_API"); 
//SetConfig [End] 

this.sendBroadcast(iSetConfig); 

Set MSR input configuration

// SetConfig [Start]
Bundle bMain = new Bundle();

Bundle bConfigMSR = new Bundle();
Bundle bParamsMSR = new Bundle();

bParamsMSR.putString("msr_input_enabled", "true");

bConfigMSR.putString("PLUGIN_NAME", "MSR");
bConfigMSR.putString("RESET_CONFIG", "true");
bConfigMSR.putBundle("PARAM_LIST", bParamsMSR);

bMain.putBundle("PLUGIN_CONFIG", bConfigMSR);

bMain.putString("PROFILE_NAME", "Profile007");
bMain.putString("PROFILE_ENABLED", "true");
bMain.putString("CONFIG_MODE", "CREATE_IF_NOT_EXIST");

Intent iSetConfig = new Intent();
iSetConfig.setAction("com.symbol.datawedge.api.ACTION");
iSetConfig.putExtra("com.symbol.datawedge.api.SET_CONFIG", bMain);
iSetConfig.putExtra("SEND_RESULT", "LAST_RESULT");
iSetConfig.putExtra("COMMAND_IDENTIFIER", "INTENT_API");
// SetConfig [End]

this.sendBroadcast(iSetConfig);

Set voice input configuration

Bundle bMain = new Bundle();
bMain.putString("PROFILE_NAME", "DWDemo");
bMain.putString("PROFILE_ENABLED", "true");
bMain.putString("CONFIG_MODE", "CREATE_IF_NOT_EXIST");

Bundle bConfig = new Bundle();
bConfig.putString("PLUGIN_NAME","VOICE");
bConfig.putString("RESET_CONFIG","false");

Bundle bParams = new Bundle();
bParams.putString("voice_input_enabled","true"); // Supported Values: true, false
bParams.putString("voice_data_capture_start_phrase","hi");
bParams.putString("voice_data_capture_end_phrase","end");
bParams.putString("voice_end_detection_timeout","3");
bParams.putString("voice_tab_command","true"); // Supported Values: true, false
bParams.putString("voice_enter_command","true"); // Supported Values: true, false
bParams.putString("voice_data_type","1");
bParams.putString("voice_start_phrase_waiting_tone","true"); // Supported Values: true, false
bParams.putString("voice_data_capture_waiting_tone","false"); // Supported Values: true, false
bParams.putString("voice_validation_window","true"); // Supported Values: true, false
bParams.putString("voice_offline_speech","true"); // Supported Values: true, false

bConfig.putBundle("PARAM_LIST", bParams);

bMain.putBundle("PLUGIN_CONFIG", bConfig); //true, false

Intent i = new Intent();
i.setAction("com.symbol.datawedge.api.ACTION");
i.putExtra("com.symbol.datawedge.api.SET_CONFIG", bMain);
    i.putExtra("SEND_RESULT","LAST_RESULT");
    // i.putExtra("SEND_RESULT", "true");  // For versions below DataWedge 7.1
i.putExtra("COMMAND_IDENTIFIER", "SET_CONFIG");
this.sendBroadcast(i);

Set BDF processing

Process Plug-ins manipulate the acquired data in a specified way before sending it to the associated app via the Output Plug-in. About BDF. About ADF.

// Main bundle properties
    Bundle bMain = new Bundle();
    bMain.putString("PROFILE_NAME","Profile12");
    bMain.putString("PROFILE_ENABLED","true");
    bMain.putString("CONFIG_MODE","CREATE_IF_NOT_EXIST");

// plugin_config bundle properties
    Bundle bConfig = new Bundle();
    bConfig.putString("PLUGIN_NAME","BDF");
    bConfig.putString("RESET_CONFIG","true");
    bConfig.putString("OUTPUT_PLUGIN_NAME","KEYSTROKE");

// param_list bundle properties
    Bundle bParams = new Bundle();
    bParams.putString("bdf_enabled","true");
    bParams.putString("bdf_prefix","AAA");
    bParams.putString("bdf_send_enter","true");

    bConfig.putBundle("PARAM_LIST", bParams);

    bMain.putBundle("PLUGIN_CONFIG", bConfig);

    Intent i = new Intent();
    i.setAction("com.symbol.datawedge.api.ACTION");
    i.putExtra("com.symbol.datawedge.api.SET_CONFIG", bMain);
    this.sendBroadcast(i);

Set ADF processing

//MAIN BUNDLE PROPERTIES
Bundle bMain = new Bundle();
bMain.putString("PROFILE_NAME","ProfileTest");
bMain.putString("PROFILE_ENABLED","true");
bMain.putString("CONFIG_MODE","CREATE_IF_NOT_EXIST");

//PLUGIN_CONFIG BUNDLE PROPERTIES
Bundle bConfig = new Bundle();
bConfig.putString("PLUGIN_NAME","ADF");
bConfig.putString("RESET_CONFIG","true");
bConfig.putString("OUTPUT_PLUGIN_NAME","KEYSTROKE");
bConfig.putString("adf_enabled","true");

//PARAM_LIST BUNDLE PROPERTIES
//RULE BUNDLE PROPERTIES
Bundle bParamsRule1 = new Bundle();
bParamsRule1.putString("name","Rule1");
bParamsRule1.putString("enabled","true");
bParamsRule1.putString("alldevices","true");
bParamsRule1.putString("string","abc");
bParamsRule1.putString("string_pos","2");
bParamsRule1.putString("string_len","4");

//ACTION BUNDLE PROPERTIES
Bundle bParamsAction1 = new Bundle();
bParamsAction1.putString("type","SEND_NEXT");
bParamsAction1.putString("action_param_1","5");


//ACTION BUNDLE PROPERTIES
Bundle bParamsAction2 = new Bundle();
bParamsAction2.putString("type","SKIP_BACK");

//DEVICE BUNDLE PROPERTIES
Bundle bParamsDevice1 = new Bundle();
bParamsDevice1.putString("device_id","BARCODE");
bParamsDevice1.putString("enabled","true");
bParamsDevice1.putString("alldecoders","false");
bParamsDevice1.putString("all_label_ids","false");

//DEVICE BUNDLE PROPERTIES
Bundle bParamsDevice2 = new Bundle();
bParamsDevice2.putString("device_id","MSR");
bParamsDevice2.putString("enabled","true");

//DEVICE BUNDLE PROPERTIES
Bundle bParamsDevice3 = new Bundle();
bParamsDevice3.putString("device_id","SIMULSCAN");
bParamsDevice3.putString("enabled","true");

//DECODER BUNDLE PROPERTIES
Bundle bParamsDecoders1 = new Bundle();
bParamsDecoders1.putString("device_id","BARCODE");
bParamsDecoders1.putString("decoder","Australian Postal");
bParamsDecoders1.putString("enabled","true");

//DECODER BUNDLE PROPERTIES
Bundle bParamsDecoders2 = new Bundle();
bParamsDecoders2.putString("device_id","BARCODE");
bParamsDecoders2.putString("decoder","Bookland");
bParamsDecoders2.putString("enabled","false");

//DECODER BUNDLE PROPERTIES
Bundle bParamsDecoders3 = new Bundle();
bParamsDecoders3.putString("device_id","BARCODE");
bParamsDecoders3.putString("decoder","Codebar");
bParamsDecoders3.putString("enabled","true");

//LABEL ID BUNDLE PROPERTIES
Bundle bParamsLabelID1 = new Bundle();
bParamsLabelID1.putString("device_id","BARCODE");
bParamsLabelID1.putString("label_id","UDI_GS1");
bParamsLabelID1.putString("enabled","true");

//LABEL ID BUNDLE PROPERTIES
Bundle bParamsLabelID2 = new Bundle();
bParamsLabelID2.putString("device_id","BARCODE");
bParamsLabelID2.putString("label_id","UDI_HIBCC");
bParamsLabelID2.putString("enabled","true");

ArrayList<Bundle> bParamsActionList = new ArrayList<Bundle>();
bParamsActionList.add(bParamsAction1);
bParamsActionList.add(bParamsAction2);

ArrayList<Bundle> bParamsDeviceList = new ArrayList<Bundle>();
bParamsDeviceList.add(bParamsDevice1);
bParamsDeviceList.add(bParamsDevice2);
bParamsDeviceList.add(bParamsDevice3);

ArrayList<Bundle> bParamsDecoderList = new ArrayList<Bundle>();
bParamsDecoderList.add(bParamsDecoders1);
bParamsDecoderList.add(bParamsDecoders2);
bParamsDecoderList.add(bParamsDecoders3);

ArrayList<Bundle> bParamsLabelIDList = new ArrayList<Bundle>();
bParamsLabelIDList.add(bParamsLabelID1);
bParamsLabelIDList.add(bParamsLabelID2);

bParamsRule1.putParcelableArrayList("ACTIONS",bParamsActionList);
bParamsRule1.putParcelableArrayList("DEVICES",bParamsDeviceList);
bParamsRule1.putParcelableArrayList("DECODERS",bParamsDecoderList);
bParamsRule1.putParcelableArrayList("LABEL_IDS",bParamsLabelIDList);

Bundle bParamsRule2 = new Bundle();
bParamsRule2.putString("name","Rule30");
bParamsRule2.putString("enabled","true");
bParamsRule2.putString("alldevices","true");
bParamsRule2.putString("string","cde");
bParamsRule2.putString("string_pos","3");
bParamsRule2.putString("string_len","5");

ArrayList<Bundle> bParamsList = new ArrayList<Bundle>();
bParamsList.add(bParamsRule1);
bParamsList.add(bParamsRule2);

bConfig.putParcelableArrayList("PARAM_LIST", bParamsList);

bMain.putBundle("PLUGIN_CONFIG", bConfig);

Intent i = new Intent();
i.setAction("com.symbol.datawedge.api.ACTION");
i.putExtra("com.symbol.datawedge.api.SET_CONFIG", bMain);
i.putExtra("SEND_RESULT","LAST_RESULT");
// i.putExtra("SEND_RESULT", "true");  // For versions below DataWedge 7.1
i.putExtra("COMMAND_IDENTIFIER", "ADF_API");
this.sendBroadcast(i);

// GET RESULT CODE
public void onReceive(Context context, Intent intent){

String command = intent.getStringExtra("COMMAND");
String commandidentifier = intent.getStringExtra("COMMAND_IDENTIFIER");
String result = intent.getStringExtra("RESULT");

Bundle bundle = new Bundle();
String resultInfo = "";
if(intent.hasExtra("RESULT_INFO")){
    bundle = intent.getBundleExtra("RESULT_INFO");
    Set<String> keys = bundle.keySet();
    for (String key: keys) {
        resultInfo += key + ": "+bundle.getString(key) + "\n";
    }
}

String text = "Command: "+command+"\n" +
        "Result: " +result+"\n" +
        "Result Info: " +resultInfo + "\n" +
        "CID:"+commandidentifier;
Toast.makeText(context, text, Toast.LENGTH_LONG).show();
};

Set TOKEN processing

// SetConfig [Start]
Bundle bMain = new Bundle();

Bundle bConfigToken = new Bundle();
Bundle bParamsToken = new Bundle();

bParamsToken.putString("send_tokens_option", "BARCODES_TOKENS"); // Supported Values: DISABLED, TOKENS, BARCODES_TOKENS
bParamsToken.putString("token_separator", "LF"); //Supported Values:None, TAB, CR, LF, NONE
bParamsToken.putString("multibarcode_separator", "LF"); //Supported Values:None, TAB, CR, LF, NONE

Bundle tokenOrder_manufacturing_date_original = new Bundle();
tokenOrder_manufacturing_date_original.putString("name", "manufacturing_date_original");
tokenOrder_manufacturing_date_original.putString("enabled", "true");

Bundle tokenOrder_expiration_date_original = new Bundle();
tokenOrder_expiration_date_original.putString("name", "expiration_date_original");
tokenOrder_expiration_date_original.putString("enabled", "true");

Bundle tokenOrder_di = new Bundle();
tokenOrder_di.putString("name", "di");
tokenOrder_di.putString("enabled", "true");

Bundle tokenOrder_lot_number = new Bundle();
tokenOrder_lot_number.putString("name", "lot_number");
tokenOrder_lot_number.putString("enabled", "true");


Bundle tokenOrder_serial_number = new Bundle();
tokenOrder_serial_number.putString("name", "serial_number");
tokenOrder_serial_number.putString("enabled", "true");


Bundle tokenOrder_mpho_lot_number = new Bundle();
tokenOrder_mpho_lot_number.putString("name", "mpho_lot_number");
tokenOrder_mpho_lot_number.putString("enabled", "true");


Bundle tokenOrder_donation_id = new Bundle();
tokenOrder_donation_id.putString("name", "donation_id");
tokenOrder_donation_id.putString("enabled", "true");

Bundle tokenOrder_labeler_identification_code = new Bundle();
tokenOrder_labeler_identification_code.putString("name", "labeler_identification_code");
tokenOrder_labeler_identification_code.putString("enabled", "true");


Bundle tokenOrder_product_or_catalog_number = new Bundle();
tokenOrder_product_or_catalog_number.putString("name", "product_or_catalog_number");
tokenOrder_product_or_catalog_number.putString("enabled", "true");

Bundle tokenOrder_unit_of_measure_id = new Bundle();
tokenOrder_unit_of_measure_id.putString("name", "unit_of_measure_id");
tokenOrder_unit_of_measure_id.putString("enabled", "false");

Bundle tokenOrder_quantity = new Bundle();
tokenOrder_quantity.putString("name", "quantity");
tokenOrder_quantity.putString("enabled", "false");


// Specify the token order
ArrayList<Bundle> tokenOrderList = new ArrayList<>();
tokenOrderList.add(tokenOrder_manufacturing_date_original);
tokenOrderList.add(tokenOrder_expiration_date_original);
tokenOrderList.add(tokenOrder_lot_number);
tokenOrderList.add(tokenOrder_di);
tokenOrderList.add(tokenOrder_serial_number);
tokenOrderList.add(tokenOrder_mpho_lot_number);
tokenOrderList.add(tokenOrder_donation_id);
tokenOrderList.add(tokenOrder_labeler_identification_code);
tokenOrderList.add(tokenOrder_product_or_catalog_number);
tokenOrderList.add(tokenOrder_unit_of_measure_id);
tokenOrderList.add(tokenOrder_quantity);


bParamsToken.putParcelableArrayList("token_order", tokenOrderList);


bConfigToken.putString("PLUGIN_NAME", "TOKEN");
bConfigToken.putString("OUTPUT_PLUGIN_NAME", "KEYSTROKE"); // Tokens are supported only in KEYSTROKE and IP plugins only
bConfigToken.putString("RESET_CONFIG", "true");
bConfigToken.putBundle("PARAM_LIST", bParamsToken);

bMain.putBundle("PLUGIN_CONFIG", bConfigToken);

bMain.putString("PROFILE_NAME", "Profile007");
bMain.putString("PROFILE_ENABLED", "true");
bMain.putString("CONFIG_MODE", "CREATE_IF_NOT_EXIST");

Intent iSetConfig = new Intent();
iSetConfig.setAction("com.symbol.datawedge.api.ACTION");
iSetConfig.putExtra("com.symbol.datawedge.api.SET_CONFIG", bMain);
iSetConfig.putExtra("SEND_RESULT", "LAST_RESULT");
iSetConfig.putExtra("COMMAND_IDENTIFIER", "INTENT_API");
// SetConfig [End]

this.sendBroadcast(iSetConfig);

Set KEYSTROKE output

@Override
protected void onCreate(Bundle savedInstanceState) {
    super.onCreate(savedInstanceState);
    setContentView(R.layout.activity_main);
    registerReceivers();
}

@Override
protected void onResume() {
    super.onResume();
    setKeystrokeOutputPluginConfiguration();
}

private void registerReceivers() {
    IntentFilter filter = new IntentFilter();
    filter.addAction("com.symbol.datawedge.api.RESULT_ACTION");
    filter.addCategory("android.intent.category.DEFAULT");
    registerReceiver(datawedgeKeystrokeNIntentStatusBR, filter);
}

private BroadcastReceiver datawedgeKeystrokeNIntentStatusBR = new BroadcastReceiver() {
    @Override
    public void onReceive(Context context, Intent intent) {
        String command = intent.getStringExtra("COMMAND").equals("") ? "EMPTY" : intent.getStringExtra("COMMAND");
        String commandIdentifier = intent.getStringExtra("COMMAND_IDENTIFIER").equals("") ? "EMPTY" : intent.getStringExtra("COMMAND_IDENTIFIER");
        String result = intent.getStringExtra("RESULT").equals("") ? "EMPTY" : intent.getStringExtra("RESULT");

        Bundle bundle;
        String resultInfo = "";
        if (intent.hasExtra("RESULT_INFO")) {
            bundle = intent.getBundleExtra("RESULT_INFO");
            Set<String> keys = bundle.keySet();
            for (String key : keys) {
                resultInfo += key + ": " + bundle.getString(key) + "\n";
            }
        }

         String text="\n"+"Command:      " + command + "\n" +
                          "Result:       " + result + "\n" +
                          "Result Info:  " + resultInfo + "\n" +
                          "CID:          " + commandIdentifier;

        Log.d("TAG”,text);
    }
};

public void setKeystrokeOutputPluginConfiguration() {

    Bundle configBundle = new Bundle();
    configBundle.putString("PROFILE_NAME","UserProfile");
    configBundle.putString("PROFILE_ENABLED","true");
    configBundle.putString("CONFIG_MODE","CREATE_IF_NOT_EXIST");

    Bundle bConfig = new Bundle();

    bConfig.putString("PLUGIN_NAME", "KEYSTROKE");
    Bundle bParams = new Bundle();
    bParams.putString("keystroke_output_enabled","true");
    bParams.putString("keystroke_action_char","9"); // 0, 9 , 10, 13
    bParams.putString("keystroke_delay_extended_ascii","500");
    bParams.putString("keystroke_delay_control_chars","800");
    bConfig.putBundle("PARAM_LIST", bParams);

    configBundle.putBundle("PLUGIN_CONFIG", bConfig);

    Intent i = new Intent();
    i.setAction("com.symbol.datawedge.api.ACTION");
    i.putExtra("com.symbol.datawedge.api.SET_CONFIG", configBundle);
        i.putExtra("SEND_RESULT","LAST_RESULT");
        // i.putExtra("SEND_RESULT", "true");  // For versions below DataWedge 7.1
    i.putExtra("COMMAND_IDENTIFIER", "KEYSTROKE_API");
    this.sendBroadcast(i);
}

@Override
protected void onDestroy() {
    super.onDestroy();
    unregisterReceiver(datawedgeKeystrokeNIntentStatusBR);
}

Set IP output

// SetConfig [Start]
Bundle bMain = new Bundle();

Bundle bConfigIPOutput = new Bundle();
Bundle bParamsIPOutput = new Bundle();
bParamsIPOutput.putString("ip_output_enabled", "true");
bParamsIPOutput.putString("ip_output_ip_wedge_enabled", "false");
bParamsIPOutput.putString("ip_output_protocol", "UDP"); //Supported Values: TCP: UDP
bParamsIPOutput.putString("ip_output_address", "192.168.0.1"); //Supported Values : IP Address format
bParamsIPOutput.putString("ip_output_port", "55555"); //Supported Values : 1 - 65535

bConfigIPOutput.putString("PLUGIN_NAME", "IP");
bConfigIPOutput.putString("RESET_CONFIG", "true");
bConfigIPOutput.putBundle("PARAM_LIST", bParamsIPOutput);

ArrayList<Bundle> bundlePluginConfig = new ArrayList<>();
bundlePluginConfig.add(bConfigIPOutput);
bMain.putParcelableArrayList("PLUGIN_CONFIG", bundlePluginConfig);


bMain.putString("PROFILE_NAME", "Profile007");
bMain.putString("PROFILE_ENABLED", "true");
bMain.putString("CONFIG_MODE", "CREATE_IF_NOT_EXIST");

Intent iSetConfig = new Intent();
iSetConfig.setAction("com.symbol.datawedge.api.ACTION");
iSetConfig.putExtra("com.symbol.datawedge.api.SET_CONFIG", bMain);
iSetConfig.putExtra("SEND_RESULT", "LAST_RESULT");
iSetConfig.putExtra("COMMAND_IDENTIFIER", "INTENT_API");
// SetConfig [End]

this.sendBroadcast(iSetConfig);

Set INTENT output

@Override
protected void onCreate(Bundle savedInstanceState) {
    super.onCreate(savedInstanceState);
    setContentView(R.layout.activity_main);
    registerReceivers();
}

@Override
protected void onResume() {
    super.onResume();
    setIntentOutputPluginConfiguration();
}

private void registerReceivers() {
    IntentFilter filter = new IntentFilter();
    filter.addAction("com.symbol.datawedge.api.RESULT_ACTION");
    filter.addCategory("android.intent.category.DEFAULT");
    registerReceiver(datawedgeKeystrokeNIntentStatusBR, filter);
}

private BroadcastReceiver datawedgeKeystrokeNIntentStatusBR = new BroadcastReceiver() {
    @Override
    public void onReceive(Context context, Intent intent) {
        String command = intent.getStringExtra("COMMAND").equals("") ? "EMPTY" : intent.getStringExtra("COMMAND");
        String commandIdentifier = intent.getStringExtra("COMMAND_IDENTIFIER").equals("") ? "EMPTY" : intent.getStringExtra("COMMAND_IDENTIFIER");
        String result = intent.getStringExtra("RESULT").equals("") ? "EMPTY" : intent.getStringExtra("RESULT");

        Bundle bundle;
        String resultInfo = "";
        if (intent.hasExtra("RESULT_INFO")) {
            bundle = intent.getBundleExtra("RESULT_INFO");
            Set<String> keys = bundle.keySet();
            for (String key : keys) {
                resultInfo += key + ": " + bundle.getString(key) + "\n";
            }
        }
        String text ="\n" + "Command:      " + command + "\n" +
                            "Result:       " + result + "\n" +
                            "Result Info:  " + resultInfo + "\n" +
                            "CID:          " + commandIdentifier;
        Log.d("TAG”,text);
    }
};

public void setIntentOutputPluginConfiguration() {

    Bundle bMain = new Bundle();
    Bundle bConfig = new Bundle();
    Bundle bParams = new Bundle();

    bParams.putString("intent_output_enabled","true");
    bParams.putString("intent_action","com.symbol.dwudiusertokens.udi");
    bParams.putString("intent_category","zebra.intent.dwudiusertokens.UDI");
    bParams.putInt("intent_delivery",2); //Use "0" for Start Activity, "1" for Start Service, "2" for Broadcast

    bConfig.putString("PLUGIN_NAME", "INTENT");
    bConfig.putString("RESET_CONFIG","false");
    bConfig.putBundle("PARAM_LIST", bParams);

    bMain.putBundle("PLUGIN_CONFIG", bConfig);
    bMain.putString("PROFILE_NAME","UserProfile");
    bMain.putString("PROFILE_ENABLED","true");
    bMain.putString("CONFIG_MODE","CREATE_IF_NOT_EXIST");

    Intent i = new Intent();
    i.setAction("com.symbol.datawedge.api.ACTION");
    i.putExtra("com.symbol.datawedge.api.SET_CONFIG",bMain);
        i.putExtra("SEND_RESULT","LAST_RESULT");
        // i.putExtra("SEND_RESULT", "true");  // For versions below DataWedge 7.1
        i.putExtra("COMMAND_IDENTIFIER", "INTENT_API");
    this.sendBroadcast(i);
}

@Override
protected void onDestroy() {
    super.onDestroy();
    unregisterReceiver(datawedgeKeystrokeNIntentStatusBR);
}

Set/Get result codes

Command and configuration intent parameters determine whether to send result codes (disabled by default). When using SEND_RESULT, the COMMAND_IDENTIFIER is used to match the result code with the originating intent. Sample usage of these parameters is shown below.

Note: This generic code must be modified to match the API being used.

// send the intent
    Intent i = new Intent();
    i.setAction(ACTION);
    i.putExtra("com.symbol.datawedge.api.CREATE_PROFILE", "Profile1");

// request and identify the result code
    i.putExtra("SEND_RESULT","LAST_RESULT");
     // i.putExtra("SEND_RESULT", "true");  // For versions below DataWedge 7.1
    i.putExtra("COMMAND_IDENTIFIER","123456789");
    this.sendBroadcast(i);

// register to receive the result
    public void onReceive(Context context, Intent intent){

        String command = intent.getStringExtra("COMMAND");
        String commandidentifier = intent.getStringExtra("COMMAND_IDENTIFIER");
        String result = intent.getStringExtra("RESULT");

        Bundle bundle = new Bundle();
        String resultInfo = "";
        if(intent.hasExtra("RESULT_INFO")){
            bundle = intent.getBundleExtra("RESULT_INFO");
            Set<String> keys = bundle.keySet();
            for (String key: keys) {
                resultInfo += key + ": "+bundle.getString(key) + "\n";
            }
        }

        String text = "Command: "+command+"\n" +
                      "Result: " +result+"\n" +
                      "Result Info: " +resultInfo + "\n" +
                      "CID:"+commandidentifier;

        Toast.makeText(context, text, Toast.LENGTH_LONG).show();

    };

Use the internal imager for scanning

Bundle bConfig = new Bundle();

bConfig.putString("PLUGIN_NAME","BARCODE");

Bundle bParams = new Bundle();
bParams.putString("scanner_input_enabled", "true");
//
// auto or valid scanner identifier:
//
bParams.putString("scanner_selection_by_identifier", "INTERNAL_IMAGER");
bConfig.putBundle("PARAM_LIST",bParams);

Configure an inter-character delay

private Integer ctrlCharacterDelayValue;
private Integer genericCharacterDelayValue;
private Boolean flagExtendedASCIIOnly;

@Override
protected void onCreate(Bundle savedInstanceState) {
    super.onCreate(savedInstanceState);
    setContentView(R.layout.activity_main);

    registerReceivers();
    ctrlCharacterDelayValue = null;
    genericCharacterDelayValue = null;
    flagExtendedASCIIOnly = null;
}

private void registerReceivers() {
    IntentFilter filter = new IntentFilter();
    filter.addAction("com.symbol.datawedge.api.RESULT_ACTION");
    filter.addCategory(Intent.CATEGORY_DEFAULT);
    registerReceiver(broadcastReceiver, filter);
}

@Override
protected void onDestroy() {
    super.onDestroy();
    unregisterReceiver(broadcastReceiver);
}

//Set configuration
public void setKeystrokeOutputPluginConfiguration(View v) {

    Bundle configBundle = new Bundle();
    configBundle.putString("PROFILE_NAME","Profile0 (default)");
    configBundle.putString("PROFILE_ENABLED","true");
    configBundle.putString("CONFIG_MODE","UPDATE");

    Bundle bConfig = new Bundle();

    bConfig.putString("PLUGIN_NAME", "KEYSTROKE");
    Bundle bParams = new Bundle();
    bParams.putString("keystroke_output_enabled","true");
    if(ctrlCharacterDelayValue!=null){
        bParams.putString("keystroke_delay_control_chars",ctrlCharacterDelayValue+"");
    }
    if(genericCharacterDelayValue !=null){
        bParams.putString("keystroke_character_delay", genericCharacterDelayValue +"");
    }
    if(flagExtendedASCIIOnly!=null){
        bParams.putString("keystroke_delay_multibyte_chars_only", flagExtendedASCIIOnly +"");
    }

    bConfig.putBundle("PARAM_LIST", bParams);
    configBundle.putBundle("PLUGIN_CONFIG", bConfig);

    Intent i = new Intent();
    i.setAction("com.symbol.datawedge.api.ACTION");
    i.putExtra("com.symbol.datawedge.api.SET_CONFIG", configBundle);
        i.putExtra("SEND_RESULT","LAST_RESULT");
        // i.putExtra("SEND_RESULT", "true");  // For versions below DataWedge 7.1
    i.putExtra("COMMAND_IDENTIFIER", "KEYSTROKE_API");
    this.sendBroadcast(i);
    }

//broadcast receiver
private BroadcastReceiver broadcastReceiver = new BroadcastReceiver() {
    @Override
    public void onReceive(Context context, Intent intent) {
        String action = intent.getAction();
        Log.d(TAG, "#DataWedge-APP# Action: " + action);


    //result of set config
        if(action.equals("com.symbol.datawedge.api.RESULT_ACTION")){
            Bundle extrasBundle = intent.getExtras();
            Set<String> keys = extrasBundle.keySet();
            if(keys!=null&&keys.contains("RESULT")){
                String result = (String)extrasBundle.get("RESULT");
                Log.d(TAG,"Result:"+result);
                //get additional info
                Bundle resultInforBundle = (Bundle) extrasBundle.get("RESULT_INFO");
                Object resultCode = resultInforBundle.get("RESULT_CODE");
                if(resultCode instanceof String){
                    String code = (String)resultCode;
                    Log.d(TAG,"Code:"+code);
                }else if(resultCode instanceof String[]){
                    String[] codesArray = (String[])resultCode;
                    if(codesArray!=null){
                        for(String code : codesArray){
                            Log.d(TAG,"Code:"+code);
                        }
                    }
                }
            }

        }//end result of set config
    }//end onReceive
};

Set configuration for multiple modules (full profile) in a single intent

Support started with DataWedge 7.1. Previous DataWedge versions required multiple intent calls to set configuration for multiple modules (plugins, APP_LIST, and Data Capture Plus).

@Override
protected void onCreate(Bundle savedInstanceState) {
        super.onCreate(savedInstanceState);
        setContentView(R.layout.activity_main);

        IntentFilter filter = new IntentFilter();
        filter.addAction("com.symbol.datawedge.api.RESULT_ACTION");
        filter.addCategory("android.intent.category.DEFAULT");
        registerReceiver(broadcastReceiver, filter);
        setConfig();
}

public void setConfig() {

        /**
        * Setting configuration for:
        * Intent Output Plugin
        * Barcode Input Plugin
        * SimulScan Input Plugin
        * MSR input Plugin
        * IP Output Plugin
        * Tokens for IP Output Plugin
        * Application Association
        * DCP (Data Capture Plus)
        */

        // SetConfig [Start]
        Bundle bMain = new Bundle();

        Bundle bConfigIntent = new Bundle();
        Bundle bParamsIntent = new Bundle();
        bParamsIntent.putString("intent_output_enabled", "true");
        bParamsIntent.putString("intent_action", "com.symbol.dwudiusertokens.udi");
        bParamsIntent.putString("intent_category", "zebra.intent.dwudiusertokens.UDI");
        bParamsIntent.putInt("intent_delivery", 5); //Use "0" for Start Activity, "1" for Start Service, "2" for Broadcast, "3" for start foreground service
        bConfigIntent.putString("PLUGIN_NAME", "INTENT");
        bConfigIntent.putString("RESET_CONFIG", "false");
        bConfigIntent.putBundle("PARAM_LIST", bParamsIntent);

        Bundle bConfigSimulScan = new Bundle();
        Bundle bParamsSimulScan = new Bundle();
        bParamsSimulScan.putString("simulscan_input_enabled", "true");
        bParamsSimulScan.putString("simulscan_input_source", "Imager"); //Supported values: Camera, Imager, Default
        bParamsSimulScan.putString("simulscan_region_separator", "TAB"); //Supported Values:None, TAB, CR, LF, NONE
        bParamsSimulScan.putString("simulscan_log_dir", "/storage/zebra/intent/");
        bParamsSimulScan.putString("simulscan_enable_timestamp", "true");

        Bundle templateParamsBundle = new Bundle();
        templateParamsBundle.putString("dynamic_quantity", "99");
        bParamsSimulScan.putString("simulscan_template", "UserDefinedQuantity.xml"); // Ex:  UserDefinedQuantity.xml, Default - BankCheck.xml, Default - Barcode 1.xml, Default - Barcode 10.xml, Default - Barcode 2.xml, Default - Barcode 4.xml, Default - Barcode 5.xml, Default - BookNumber.xml, Default - DocCap + Optional Barcode.xml, Default - DocCap + Required Barcode.xml, Default - TravelDoc.xml, Default - Unstructured Multi-Line.xml, Default - Unstructured Single Line.xml
        bParamsSimulScan.putBundle("simulscan_template_params",templateParamsBundle);

        bConfigSimulScan.putString("PLUGIN_NAME", "SIMULSCAN");
        bConfigSimulScan.putString("RESET_CONFIG", "false");
        bConfigSimulScan.putBundle("PARAM_LIST", bParamsSimulScan);

        Bundle bConfigBarcode = new Bundle();
        Bundle bParamsBarcode = new Bundle();
        bParamsBarcode.putString("scanner_selection","auto");
        bParamsBarcode.putString("scanner_input_enabled","true");
        bConfigBarcode.putString("PLUGIN_NAME", "BARCODE");
        bConfigBarcode.putString("RESET_CONFIG", "false");
        bConfigBarcode.putBundle("PARAM_LIST", bParamsBarcode);

        Bundle bConfigMSR = new Bundle();
        Bundle bParamsMSR = new Bundle();
        bParamsMSR.putString("msr_input_enabled", "true");
        bConfigMSR.putString("PLUGIN_NAME", "MSR");
        bConfigMSR.putString("RESET_CONFIG", "false");
        bConfigMSR.putBundle("PARAM_LIST", bParamsMSR);

        Bundle bConfigIPOutput = new Bundle();
        Bundle bParamsIPOutput = new Bundle();
        bParamsIPOutput.putString("ip_output_enabled", "true");
        bParamsIPOutput.putString("ip_output_ip_wedge_enabled", "false");
        bParamsIPOutput.putString("ip_output_protocol", "UDP"); //Supported Values: TCP: UDP
        bParamsIPOutput.putString("ip_output_address", "192.168.0.1"); //Supported Values : IP Address format
        bParamsIPOutput.putString("ip_output_port", "55555"); //Supported Values : 1 - 65535

        bConfigIPOutput.putString("PLUGIN_NAME", "IP");
        bConfigIPOutput.putString("RESET_CONFIG", "false");
        bConfigIPOutput.putBundle("PARAM_LIST", bParamsIPOutput);

        Bundle bConfigToken = new Bundle();
        Bundle bParamsToken = new Bundle();

        bParamsToken.putString("send_tokens_option", "BARCODES_TOKENS"); // Supported Values: DISABLED, TOKENS, BARCODES_TOKENS
        bParamsToken.putString("token_separator", "LF"); //Supported Values:None, TAB, CR, LF, NONE
        bParamsToken.putString("multibarcode_separator", "LF"); //Supported Values:None, TAB, CR, LF, NONE

        Bundle tokenOrder_manufacturing_date_original = new Bundle();
        tokenOrder_manufacturing_date_original.putString("name","manufacturing_date_original");
        tokenOrder_manufacturing_date_original.putString("enabled","true");

        Bundle tokenOrder_expiration_date_original = new Bundle();
        tokenOrder_expiration_date_original.putString("name","expiration_date_original");
        tokenOrder_expiration_date_original.putString("enabled","true");

        Bundle tokenOrder_di = new Bundle();
        tokenOrder_di.putString("name","di");
        tokenOrder_di.putString("enabled","true");

        Bundle tokenOrder_lot_number = new Bundle();
        tokenOrder_lot_number.putString("name","lot_number");
        tokenOrder_lot_number.putString("enabled","true");

        Bundle tokenOrder_serial_number = new Bundle();
        tokenOrder_serial_number.putString("name","serial_number");
        tokenOrder_serial_number.putString("enabled","true");

        Bundle tokenOrder_mpho_lot_number = new Bundle();
        tokenOrder_mpho_lot_number.putString("name","mpho_lot_number");
        tokenOrder_mpho_lot_number.putString("enabled","true");

        Bundle tokenOrder_donation_id = new Bundle();
        tokenOrder_donation_id.putString("name","donation_id");
        tokenOrder_donation_id.putString("enabled","true");

        Bundle tokenOrder_labeler_identification_code = new Bundle();
        tokenOrder_labeler_identification_code.putString("name","labeler_identification_code");
        tokenOrder_labeler_identification_code.putString("enabled","true");

        Bundle tokenOrder_product_or_catalog_number = new Bundle();
        tokenOrder_product_or_catalog_number.putString("name","product_or_catalog_number");
        tokenOrder_product_or_catalog_number.putString("enabled","true");

        Bundle tokenOrder_unit_of_measure_id = new Bundle();
        tokenOrder_unit_of_measure_id.putString("name","unit_of_measure_id");
        tokenOrder_unit_of_measure_id.putString("enabled","true");

        Bundle tokenOrder_quantity = new Bundle();
        tokenOrder_quantity.putString("name","quantity");
        tokenOrder_quantity.putString("enabled","false");

        ArrayList<Bundle> tokenOrderList = new ArrayList<>();
        tokenOrderList.add(tokenOrder_manufacturing_date_original);
        tokenOrderList.add(tokenOrder_expiration_date_original);
        tokenOrderList.add(tokenOrder_lot_number);
        tokenOrderList.add(tokenOrder_di);
        tokenOrderList.add(tokenOrder_serial_number);
        tokenOrderList.add(tokenOrder_mpho_lot_number);
        tokenOrderList.add(tokenOrder_donation_id);
        tokenOrderList.add(tokenOrder_labeler_identification_code);
        tokenOrderList.add(tokenOrder_product_or_catalog_number);
        tokenOrderList.add(tokenOrder_unit_of_measure_id);
        tokenOrderList.add(tokenOrder_quantity);

        bParamsToken.putParcelableArrayList("token_order", tokenOrderList);

        bConfigToken.putString("PLUGIN_NAME", "TOKEN");
        bConfigToken.putString("OUTPUT_PLUGIN_NAME","IP");
        bConfigToken.putString("RESET_CONFIG", "true");
        bConfigToken.putBundle("PARAM_LIST", bParamsToken);

        ArrayList<Bundle> bundlePluginConfig = new ArrayList<>();
        bundlePluginConfig.add(bConfigIntent);
        bundlePluginConfig.add(bConfigBarcode);
        bundlePluginConfig.add(bConfigSimulScan);
        bundlePluginConfig.add(bConfigMSR);
        bundlePluginConfig.add(bConfigIPOutput);
        bundlePluginConfig.add(bConfigToken);

        bMain.putParcelableArrayList("PLUGIN_CONFIG", bundlePluginConfig);

        //AppList[Start]
        Bundle bundleApp1 = new Bundle();
        bundleApp1.putString("PACKAGE_NAME", "com.symbol.emdk.simulscansample1");
        bundleApp1.putStringArray("ACTIVITY_LIST", new String[]{
                        "com.symbol.emdk.simulscansample1.DeviceControl",
                        "com.symbol.emdk.simulscansample1.MainActivity",
                        "com.symbol.emdk.simulscansample1.ResultsActivity",
                        "com.symbol.emdk.simulscansample1.ResultsActivity2",
                        "com.symbol.emdk.simulscansample1.SettingsFragment1"});

        Bundle bundleApp2 = new Bundle();
        bundleApp2.putString("PACKAGE_NAME", "com.example.intents.datawedgeintent");
        bundleApp2.putStringArray("ACTIVITY_LIST", new String[]{
                        "com.example.intents.datawedgeintent.DeviceControl",
                        "com.example.intents.datawedgeintent.MainActivity",
                        "com.example.intents.datawedgeintent.ResultsActivity",
                        "com.example.intents.datawedgeintent.SettingsFragment1"});

        Bundle bundleApp3 = new Bundle();
        bundleApp3.putString("PACKAGE_NAME", "com.symbol.pubudu");
        bundleApp3.putStringArray("ACTIVITY_LIST", new String[]{"*"});

        Bundle bundleApp4 = new Bundle();
        bundleApp4.putString("PACKAGE_NAME", "com.symbol.myzebraapp");
        bundleApp4.putStringArray("ACTIVITY_LIST", new String[]{"*"});

        // ADD APP_LIST BUNDLE(S) INTO THE MAIN BUNDLE
        bMain.putParcelableArray("APP_LIST", new Bundle[]{
                        bundleApp1
                        , bundleApp2
                        , bundleApp3
                        , bundleApp4
        });

        // AppList [End]

        Bundle bConfigDCP = new Bundle();
        Bundle bParamsDCP = new Bundle();
        bParamsDCP.putString("dcp_input_enabled", "true");
        bParamsDCP.putString("dcp_dock_button_on", "LEFT"); //Supported values: BOTH - Left or Right, LEFT - Left only, RIGHT - Right only
        bParamsDCP.putString("dcp_start_in", "FULLSCREEN"); //Supported Values: FULLSCREEN, BUTTON, BUTTON_ONLY
        bParamsDCP.putString("dcp_highest_pos", "10"); //Supported Values:  0 - 100
        bParamsDCP.putString("dcp_lowest_pos", "20"); //Supported Values: 0 - 100
        bParamsDCP.putString("dcp_drag_detect_time", "501"); //Supported Values: 0 - 1000
        bConfigDCP.putString("RESET_CONFIG", "true");
        bConfigDCP.putBundle("PARAM_LIST", bParamsDCP);

        bMain.putBundle("DCP", bConfigDCP);

        bMain.putString("PROFILE_NAME", "Profile007");
        bMain.putString("PROFILE_ENABLED", "true");
        bMain.putString("CONFIG_MODE", "CREATE_IF_NOT_EXIST");

        Intent iSetConfig = new Intent();
        iSetConfig.setAction("com.symbol.datawedge.api.ACTION");
        iSetConfig.putExtra("com.symbol.datawedge.api.SET_CONFIG", bMain);
        iSetConfig.putExtra("SEND_RESULT", "COMPLETE_RESULT"); //Supported values: NONE, LAST_RESULT, COMPLETE_RESULT
        iSetConfig.putExtra("COMMAND_IDENTIFIER", "INTENT_API");
        //SetConfig [End]

        this.sendBroadcast(iSetConfig);
}

private BroadcastReceiver broadcastReceiver = new BroadcastReceiver() {
        @Override
        public void onReceive(Context context, Intent intent) {
                String action = intent.getAction();

                String strFinalResult = "";
                String command = intent.getStringExtra("COMMAND");
                String profileName = intent.getStringExtra("PROFILE_NAME");
                String resultInfo = "";

                if (action.equals("com.symbol.datawedge.api.RESULT_ACTION")) {

                        if (intent.hasExtra("RESULT_LIST")) { // returns for COMPLETE_RESULT
                                resultInfo += "ProfileName: " + profileName + "\n";
                                ArrayList<Bundle> result_list = (ArrayList)intent.getSerializableExtra("RESULT_LIST");
                                for (Bundle bundleResult : result_list) {

                                        resultInfo +="\n\n";

                                        Set<String> keys = bundleResult.keySet();
                                        for (String key : keys) {
                                                String val = bundleResult.getString(key);
                                                if (val == null) {

                                                        if (bundleResult.getStringArray(key) != null) {
                                                                val = "";
                                                                for (String s : bundleResult.getStringArray(key)) {
                                                                        val += "" + s + "\n";
                                                                }
                                                        }
                                                }

                                                resultInfo += key + ": " + val + "\n";
                                        }
                                }
                        }

                        if (command != null) {
                                if (command.equalsIgnoreCase("com.symbol.datawedge.api.SET_CONFIG")) {
                                        Log.d("TAG", "#IntentApp# \n\nSetConfig status received:\nResultInfo: \n" + resultInfo);
                                }
                        }
                }
        }
};

Set global scanner configuration

Bundle bConfig = new Bundle();
bConfig.putString("PLUGIN_NAME","BARCODE");

Bundle bParams = new Bundle();
bParams.putString("scanner_input_enabled", "true");
bParams.putString("configure_all_scanners", "true"); // configure for all scanners
bConfig.putBundle("PARAM_LIST", bParams);

Set presentation mode - For future use only

// MAIN BUNDLE PROPERTIES
Bundle bMain = new Bundle();
bMain.putString("PROFILE_NAME", "Profile1");
bMain.putString("PROFILE_ENABLED", "true");
bMain.putString("CONFIG_MODE", "CREATE_IF_NOT_EXIST");

// PLUGIN_CONFIG BUNDLE PROPERTIES
Bundle bConfig = new Bundle();
bConfig.putString("PLUGIN_NAME", "BARCODE");
bConfig.putString("RESET_CONFIG", "true");

// PARAM_LIST BUNDLE PROPERTIES
Bundle bParams = new Bundle();

bParams.putString("scanner_selection_by_identifier", "INTERNAL_IMAGER");
bParams.putString("scanner_input_enabled" , "true");
bParams.putString("aim_type", "4"); // presentation mode
bParams.putString("scene_detect_qualifier ", "0"); // 0- None and 1- Proximity Sensor Input

…

bConfig.putBundle("PARAM_LIST", bParams);

bMain.putBundle("PLUGIN_CONFIG", bConfig);
Intent i = new Intent();
i.setAction("com.symbol.datawedge.api.ACTION");
i.putExtra("com.symbol.datawedge.api.SET_CONFIG", bMain);
this.sendBroadcast(i); 

SEE ALSO:

Zebra Support Central | Integrator Guides, Product Manuals, Software Downloads and Support

LaunchPad | Zebra Developer Community

Intent | Android Developers

Intents and Intent Filters | Android Developers

Android Intents | Tutorial