Set Config

Intent i = new Intent();
i.setAction("com.symbol.datawedge.api.ACTION");
i.putExtra("com.symbol.datawedge.api.SET_CONFIG", <mainbundle>);

• Default action_param values are 0, empty or none unless otherwise noted.
• To help minimize data loss, Zebra recommends sending a DELAY of 50 ms after sending any ENTER, LINE FEED or TAB character.

APP_LIST

An array of bundles that contains a set of PACKAGE_NAMES and an ACTIVITY_LIST to be associated with the Profile.

APP_LIST BUNDLE

Contains the following properties:

PACKAGE_NAME [String]: ex: "com.symbol.emdk.barcodesample1" or a wildcard (*) character

ACTIVITY_LIST [List]: A list of activities for the PACKAGE_NAME. Wildcard (*) character also supported.

Scanner Identifiers

The scanner identifier (introduced in DataWedge 6.5) permits scanners to be identified by a friendly name rather than an index number.

SCANNER_IDENTIFIER [String]: Present in each scanner info bundle for each scanner supported in the device. Index and identifier parameters are both supported in DataWedge and higher; the scanner identifier value takes precedence if an index also is referenced in the code.

Possible values:

• AUTO - Automatic scanner selection
• INTERNAL_IMAGER - Built-in imager scanner
• INTERNAL_LASER - Built-in laser scanner
• INTERNAL_CAMERA - Built-in camera scanner
• SERIAL_SSI - Pluggable Z-back scanner for ET50/ET55
• BLUETOOTH_SSI - RS507 Bluetooth scanner
• BLUETOOTH_RS6000 - RS6000 Bluetooth scanner
• BLUETOOTH_DS2278 - DS2278 Bluetooth scanner
• BLUETOOTH_DS3678 - DS3678 Bluetooth scanner
• PLUGABLE_SSI - Serial SSI scanner RS429 (for use with WT6000)
• PLUGABLE_SSI_RS5000 - Serial SSI scanner RS5000 (for use with WT6000)
• USB_SSI_DS3608 - DS3608 pluggable USB scanner

Result Codes

DataWedge returns the following error codes if the app includes the intent extras RECEIVE_RESULT and COMMAND_IDENTIFIER to enable the app to get results using the DataWedge result intent mechanism. See Example, below.

• PLUGIN_NOT_SUPPORTED - An attempt was made to configure a plug-in that is not supported by DataWedge intent APIs
• BUNDLE_EMPTY - The bundle contains no data
• PROFILE_NAME_EMPTY - An attempt was made to configure a Profile name with no data
• PROFILE_NOT_FOUND - An attempt was made to perform an operation on a Profile that does not exist
• PLUGIN_BUNDLE_INVALID - A passed plug-in parameter bundle is empty or contains insufficient information
• PARAMETER_INVALID - The passed parameters were empty, null or invalid
• APP_ALREADY_ASSOCIATED - An attempt was made to associate an app that was already associated with another Profile
• OPERATION_NOT_ALLOWED - An attempt was made to rename or delete a protected Profile or to associate an app with Profile0
• RESULT_ACTION_RESULT_CODE_EMPTY_RULE_NAME - Rule name empty or undefined in ADF_RULE bundle

Also see the Result Codes guide for more information.

Return Values

Error and debug messages are logged to the Android logging system, which can be viewed and filtered by the logcat command. Use logcat from an ADB shell to view the log messages:

$ adb logcat -s DWAPI

Error messages are logged for invalid actions and parameters

Scanner Input Parameters

Important: Support for decode parameters can vary depending on the selected scanning device. For device-specific support notes, please refer to the Integrator Guide that accompanied the unit.

All parameters are case sensitive.

Other Scanner Input Parameters:

Serial Input Parameters

Important: Support for serial parameters varies by device. For device-specific support notes, please refer to the Integrator Guide that accompanied the unit.

All parameters are case sensitive.

Keystroke Output Parameters

All parameters are case sensitive.

Keystroke Delay Notes

• The keystroke_delay_extended_ascii parameter is deprecated.
• If a Keystroke Plug-in bundle uses the keystroke_delay_extended_ascii parameter, DataWedge sets the keystroke_delay_multibyte_chars_only parameter to true.
• If both the keystroke_delay_extended_ascii and keystroke_character_delay parameters are sent:
  • The keystroke_character_delay value is retained.
  • The keystroke_delay_extended_ascii value is ignored.
  • If available, the keystroke_delay_multibyte_chars_only value is saved; it is otherwise considered false.

Example Code

Nested bundles

// MAIN BUNDLE PROPERTIES
    Bundle bMain = new Bundle();
    bMain.putString("PROFILE_NAME","Profile12");            // <- "Profile12" is a bundle
    bMain.putString("PROFILE_ENABLED","true");              // <- that will be enabled
    bMain.putString("CONFIG_MODE","CREATE_IF_NOT_EXIST");   // <- or created if necessary.

// PLUGIN_CONFIG BUNDLE PROPERTIES
    Bundle bConfig = new Bundle();
    bConfig.putString("PLUGIN_NAME","BARCODE");
    bConfig.putString("RESET_CONFIG","true"); 


// PARAM_LIST BUNDLE PROPERTIES
    Bundle bParams = new Bundle();
    bParams.putString("scanner_selection","auto");
    bParams.putString("scanner_input_enabled","true");
// 
// NOTE: The "scanner_selection" parameter (above) supports "auto" selection
// --OR-- the assignment of a scanner device index, which is obtained by 
// using the ENUMERATE_SCANNERS API.  
//
//      Syntax for scanner index:
//
//              Bundle bParams = new Bundle();
//      diff--> bParams.putString("current-device-id","0");
//              bParams.putString("scanner_input_enabled","true");
//
// 
// NEST THE BUNDLE "bParams" WITHIN THE BUNDLE "bConfig"
    bConfig.putBundle("PARAM_LIST", bParams);

// THEN NEST THE "bConfig" BUNDLE WITHIN THE MAIN BUNDLE "bMain"
    bMain.putBundle("PLUGIN_CONFIG", bConfig);

// CREATE APP_LIST BUNDLES (apps and/or activities to be associated with the Profile)
    Bundle bundleApp1 = new Bundle();
    bundleApp1.putString("PACKAGE_NAME","com.symbol.emdk.simulscansample1");
    bundleApp1.putStringArray("ACTIVITY_LIST", new String[]{
            "com.symbol.emdk.simulscansample1.DeviceControl",
            "com.symbol.emdk.simulscansample1.MainActivity",
            "com.symbol.emdk.simulscansample1.ResultsActivity.*",
            "com.symbol.emdk.simulscansample1.ResultsActivity2",
            "com.symbol.emdk.simulscansample1.SettingsFragment1"});

    Bundle bundleApp2 = new Bundle();
    bundleApp2.putString("PACKAGE_NAME","com.example.intents.datawedgeintent");
    bundleApp2.putStringArray("ACTIVITY_LIST", new String[]{
            "com.example.intents.datawedgeintent.DeviceControl",
            "com.example.intents.datawedgeintent.MainActivity",
            "com.example.intents.datawedgeintent.ResultsActivity",
            "com.example.intents.datawedgeintent.SettingsFragment1"});

    Bundle bundleApp3 = new Bundle();
    bundleApp3.putString("PACKAGE_NAME","*");
    bundleApp3.putStringArray("ACTIVITY_LIST", new String[]{"*"});

    Bundle bundleApp4 = new Bundle();
    bundleApp4.putString("PACKAGE_NAME","com.symbol.myzebraapp");
    bundleApp4.putStringArray("ACTIVITY_LIST", new String[]{"*"});

// NEXT APP_LIST BUNDLE(S) INTO THE MAIN BUNDLE
    bMain.putParcelableArray("APP_LIST", new Bundle[]{
            bundleApp1
            ,bundleApp2
            ,bundleApp3
            ,bundleApp4
    });

    Intent i = new Intent();
    i.setAction("com.symbol.datawedge.api.ACTION");
    i.putExtra("com.symbol.datawedge.api.SET_CONFIG", bMain);

    this.sendBroadcast(i);

Set Serial Input Configuration

//
// Port 1 Configuration [Start]
//
Bundle bPort1 = new Bundle();
bPort1.putString("serial_port_id", "0"); //Supported Values: 0,1
bPort1.putString("serial_input_enabled", "true"); // Supported Values: true, false
bPort1.putString("serial_baudrate", "1200"); // Supported Values (some): 300, 1200, 2400, 4800, 19200, and more
bPort1.putString("serial_databits", "8"); //Supported Values: 8, 7
bPort1.putString("serial_parity", "ODD"); //Supported Values: NONE, ODD, EVEN, MARK, SPACE
bPort1.putString("serial_stopbits", "1"); //Supported Values: 1, 2
bPort1.putString("serial_flow", "FLOW_RTS_CTS"); //Supported Values: FLOW_NONE, FLOW_RTS_CTS, FLOW_DSR_DTR, FLOW_XON_XOFF
//
// Port 1 Configuration [End]
//
// Port 2 Configuration [Start]
//
Bundle bPort2 = new Bundle();
bPort2.putString("serial_port_id", "1");
bPort2.putString("serial_input_enabled", "true");
bPort2.putString("serial_baudrate", "300");
bPort2.putString("serial_databits", "7");
//bPort2.putString("abc", "123");
bPort2.putString("serial_stopbits", "2");
bPort2.putString("serial_flow", "FLOW_DSR_DTR");
bPort2.putString("serial_parity", "EVEN");
//
// Port 2 Configuration [End]
//
Bundle bConfig = new Bundle();
bConfig.putString("RESET_CONFIG", "false");
bConfig.putString("PLUGIN_NAME", "SERIAL");
bConfig.putParcelableArray("DEVICE_LIST", new Bundle[]{
        bPort1, bPort2
});

Bundle bMain = new Bundle();
bMain.putString("PROFILE_NAME", "Profile0 (default)");
bMain.putString("CONFIG_MODE", "UPDATE");
bMain.putBundle("PLUGIN_CONFIG", bConfig);

Intent i = new Intent();
i.setAction("com.symbol.datawedge.api.ACTION");
i.putExtra("com.symbol.datawedge.api.SET_CONFIG", bMain);
i.putExtra("SEND_RESULT", "true");
i.putExtra("com.symbol.datawedge.api.RESULT_CATEGORY", DEFAULT_CATEGORY);
i.putExtra("COMMAND_IDENTIFIER", "DW_SERIAL_COMMAND");

this.sendBroadcast(i);

Set KEYSTROKE Output

@Override
protected void onCreate(Bundle savedInstanceState) {
    super.onCreate(savedInstanceState);
    setContentView(R.layout.activity_main);
    registerReceivers();
}

@Override
protected void onResume() {
    super.onResume();
    setKeystrokeOutputPluginConfiguration();
}

private void registerReceivers() {
    IntentFilter filter = new IntentFilter();
    filter.addAction("com.symbol.datawedge.api.RESULT_ACTION");
    filter.addCategory("android.intent.category.DEFAULT");
    registerReceiver(datawedgeKeystrokeNIntentStatusBR, filter);
}

private BroadcastReceiver datawedgeKeystrokeNIntentStatusBR = new BroadcastReceiver() {
    @Override
    public void onReceive(Context context, Intent intent) {
        String command = intent.getStringExtra("COMMAND").equals("") ? "EMPTY" : intent.getStringExtra("COMMAND");
        String commandIdentifier = intent.getStringExtra("COMMAND_IDENTIFIER").equals("") ? "EMPTY" : intent.getStringExtra("COMMAND_IDENTIFIER");
        String result = intent.getStringExtra("RESULT").equals("") ? "EMPTY" : intent.getStringExtra("RESULT");

        Bundle bundle;
        String resultInfo = "";
        if (intent.hasExtra("RESULT_INFO")) {
            bundle = intent.getBundleExtra("RESULT_INFO");
            Set<String> keys = bundle.keySet();
            for (String key : keys) {
                resultInfo += key + ": " + bundle.getString(key) + "\n";
            }
        }

         String text="\n"+"Command:      " + command + "\n" +
                          "Result:       " + result + "\n" +
                          "Result Info:  " + resultInfo + "\n" +
                          "CID:          " + commandIdentifier;

        Log.d("TAG”,text);
    }
};

public void setKeystrokeOutputPluginConfiguration() {

    Bundle configBundle = new Bundle();
    configBundle.putString("PROFILE_NAME","UserProfile");
    configBundle.putString("PROFILE_ENABLED","true");
    configBundle.putString("CONFIG_MODE","CREATE_IF_NOT_EXIST");

    Bundle bConfig = new Bundle();

    bConfig.putString("PLUGIN_NAME", "KEYSTROKE");
    Bundle bParams = new Bundle();
    bParams.putString("keystroke_output_enabled","true");
    bParams.putString("keystroke_action_char","9"); // 0, 9 , 10, 13
    bParams.putString("keystroke_delay_extended_ascii","500");
    bParams.putString("keystroke_delay_control_chars","800");
    bConfig.putBundle("PARAM_LIST", bParams);

    configBundle.putBundle("PLUGIN_CONFIG", bConfig);

    Intent i = new Intent();
    i.setAction("com.symbol.datawedge.api.ACTION");
    i.putExtra("com.symbol.datawedge.api.SET_CONFIG", configBundle);
    i.putExtra("SEND_RESULT", "true");
    i.putExtra("COMMAND_IDENTIFIER", "KEYSTROKE_API");
    this.sendBroadcast(i);
}

@Override
protected void onDestroy() {
    super.onDestroy();
    unregisterReceiver(datawedgeKeystrokeNIntentStatusBR);
}

Set INTENT Output

@Override
protected void onCreate(Bundle savedInstanceState) {
    super.onCreate(savedInstanceState);
    setContentView(R.layout.activity_main);
    registerReceivers();
}

@Override
protected void onResume() {
    super.onResume();
    setIntentOutputPluginConfiguration();
}

private void registerReceivers() {
    IntentFilter filter = new IntentFilter();
    filter.addAction("com.symbol.datawedge.api.RESULT_ACTION");
    filter.addCategory("android.intent.category.DEFAULT");
    registerReceiver(datawedgeKeystrokeNIntentStatusBR, filter);
}

private BroadcastReceiver datawedgeKeystrokeNIntentStatusBR = new BroadcastReceiver() {
    @Override
    public void onReceive(Context context, Intent intent) {
        String command = intent.getStringExtra("COMMAND").equals("") ? "EMPTY" : intent.getStringExtra("COMMAND");
        String commandIdentifier = intent.getStringExtra("COMMAND_IDENTIFIER").equals("") ? "EMPTY" : intent.getStringExtra("COMMAND_IDENTIFIER");
        String result = intent.getStringExtra("RESULT").equals("") ? "EMPTY" : intent.getStringExtra("RESULT");

        Bundle bundle;
        String resultInfo = "";
        if (intent.hasExtra("RESULT_INFO")) {
            bundle = intent.getBundleExtra("RESULT_INFO");
            Set<String> keys = bundle.keySet();
            for (String key : keys) {
                resultInfo += key + ": " + bundle.getString(key) + "\n";
            }
        }
        String text ="\n" + "Command:      " + command + "\n" +
                            "Result:       " + result + "\n" +
                            "Result Info:  " + resultInfo + "\n" +
                            "CID:          " + commandIdentifier;
        Log.d("TAG”,text);
    }
};

public void setIntentOutputPluginConfiguration() {

    Bundle bMain = new Bundle();
    Bundle bConfig = new Bundle();
    Bundle bParams = new Bundle();

    bParams.putString("intent_output_enabled","true");
    bParams.putString("intent_action","com.symbol.dwudiusertokens.udi");
    bParams.putString("intent_category","zebra.intent.dwudiusertokens.UDI");
    bParams.putInt("intent_delivery",2); //Use "0" for Start Activity, "1" for Start Service, "2" for Broadcast

    bConfig.putString("PLUGIN_NAME", "INTENT");
    bConfig.putString("RESET_CONFIG","false");
    bConfig.putBundle("PARAM_LIST", bParams);

    bMain.putBundle("PLUGIN_CONFIG", bConfig);
    bMain.putString("PROFILE_NAME","UserProfile");
    bMain.putString("PROFILE_ENABLED","true");
    bMain.putString("CONFIG_MODE","CREATE_IF_NOT_EXIST");

    Intent i = new Intent();
    i.setAction("com.symbol.datawedge.api.ACTION");
    i.putExtra("com.symbol.datawedge.api.SET_CONFIG",bMain);
    i.putExtra("SEND_RESULT", "true");
    i.putExtra("COMMAND_IDENTIFIER", "INTENT_API");
    this.sendBroadcast(i);
}

@Override
protected void onDestroy() {
    super.onDestroy();
    unregisterReceiver(datawedgeKeystrokeNIntentStatusBR);
}

Set BDF processing

Process Plug-ins manipulate the acquired data in a specified way before sending it to the associated app via the Output Plug-in. About BDF. About ADF.

// Main bundle properties
    Bundle bMain = new Bundle();
    bMain.putString("PROFILE_NAME","Profile12");
    bMain.putString("PROFILE_ENABLED","true");
    bMain.putString("CONFIG_MODE","CREATE_IF_NOT_EXIST");

// plugin_config bundle properties
    Bundle bConfig = new Bundle();
    bConfig.putString("PLUGIN_NAME","BDF");
    bConfig.putString("RESET_CONFIG","true");
    bConfig.putString("OUTPUT_PLUGIN_NAME","KEYSTROKE");

// param_list bundle properties
    Bundle bParams = new Bundle();
    bParams.putString("bdf_enabled","true");
    bParams.putString("bdf_prefix","AAA");
    bParams.putString("bdf_send_enter","true");

    bConfig.putBundle("PARAM_LIST", bParams);

    bMain.putBundle("PLUGIN_CONFIG", bConfig);

    Intent i = new Intent();
    i.setAction("com.symbol.datawedge.api.ACTION");
    i.putExtra("com.symbol.datawedge.api.SET_CONFIG", bMain);
    this.sendBroadcast(i);

Set ADF processing

//MAIN BUNDLE PROPERTIES
Bundle bMain = new Bundle();
bMain.putString("PROFILE_NAME","ProfileTest");
bMain.putString("PROFILE_ENABLED","true");
bMain.putString("CONFIG_MODE","CREATE_IF_NOT_EXIST");

//PLUGIN_CONFIG BUNDLE PROPERTIES
Bundle bConfig = new Bundle();
bConfig.putString("PLUGIN_NAME","ADF");
bConfig.putString("RESET_CONFIG","true");
bConfig.putString("OUTPUT_PLUGIN_NAME","KEYSTROKE");
bConfig.putString("adf_enabled","true");

//PARAM_LIST BUNDLE PROPERTIES
//RULE BUNDLE PROPERTIES
Bundle bParamsRule1 = new Bundle();
bParamsRule1.putString("name","Rule1");
bParamsRule1.putString("enabled","true");
bParamsRule1.putString("alldevices","true");
bParamsRule1.putString("string","abc");
bParamsRule1.putString("string_pos","2");
bParamsRule1.putString("string_len","4");

//ACTION BUNDLE PROPERTIES
Bundle bParamsAction1 = new Bundle();
bParamsAction1.putString("type","SEND_NEXT");
bParamsAction1.putString("action_param_1","5");


//ACTION BUNDLE PROPERTIES
Bundle bParamsAction2 = new Bundle();
bParamsAction2.putString("type","SKIP_BACK");

//DEVICE BUNDLE PROPERTIES
Bundle bParamsDevice1 = new Bundle();
bParamsDevice1.putString("device_id","BARCODE");
bParamsDevice1.putString("enabled","true");
bParamsDevice1.putString("alldecoders","false");
bParamsDevice1.putString("all_label_ids","false");

//DEVICE BUNDLE PROPERTIES
Bundle bParamsDevice2 = new Bundle();
bParamsDevice2.putString("device_id","MSR");
bParamsDevice2.putString("enabled","true");

//DEVICE BUNDLE PROPERTIES
Bundle bParamsDevice3 = new Bundle();
bParamsDevice3.putString("device_id","SIMULSCAN");
bParamsDevice3.putString("enabled","true");

//DECODER BUNDLE PROPERTIES
Bundle bParamsDecoders1 = new Bundle();
bParamsDecoders1.putString("device_id","BARCODE");
bParamsDecoders1.putString("decoder","Australian Postal");
bParamsDecoders1.putString("enabled","true");

//DECODER BUNDLE PROPERTIES
Bundle bParamsDecoders2 = new Bundle();
bParamsDecoders2.putString("device_id","BARCODE");
bParamsDecoders2.putString("decoder","Bookland");
bParamsDecoders2.putString("enabled","false");

//DECODER BUNDLE PROPERTIES
Bundle bParamsDecoders3 = new Bundle();
bParamsDecoders3.putString("device_id","BARCODE");
bParamsDecoders3.putString("decoder","Codebar");
bParamsDecoders3.putString("enabled","true");

//LABEL ID BUNDLE PROPERTIES
Bundle bParamsLabelID1 = new Bundle();
bParamsLabelID1.putString("device_id","BARCODE");
bParamsLabelID1.putString("label_id","UDI_GS1");
bParamsLabelID1.putString("enabled","true");

//LABEL ID BUNDLE PROPERTIES
Bundle bParamsLabelID2 = new Bundle();
bParamsLabelID2.putString("device_id","BARCODE");
bParamsLabelID2.putString("label_id","UDI_HIBCC");
bParamsLabelID2.putString("enabled","true");

ArrayList<Bundle> bParamsActionList = new ArrayList<Bundle>();
bParamsActionList.add(bParamsAction1);
bParamsActionList.add(bParamsAction2);

ArrayList<Bundle> bParamsDeviceList = new ArrayList<Bundle>();
bParamsDeviceList.add(bParamsDevice1);
bParamsDeviceList.add(bParamsDevice2);
bParamsDeviceList.add(bParamsDevice3);

ArrayList<Bundle> bParamsDecoderList = new ArrayList<Bundle>();
bParamsDecoderList.add(bParamsDecoders1);
bParamsDecoderList.add(bParamsDecoders2);
bParamsDecoderList.add(bParamsDecoders3);

ArrayList<Bundle> bParamsLabelIDList = new ArrayList<Bundle>();
bParamsLabelIDList.add(bParamsLabelID1);
bParamsLabelIDList.add(bParamsLabelID2);

bParamsRule1.putParcelableArrayList("ACTIONS",bParamsActionList);
bParamsRule1.putParcelableArrayList("DEVICES",bParamsDeviceList);
bParamsRule1.putParcelableArrayList("DECODERS",bParamsDecoderList);
bParamsRule1.putParcelableArrayList("LABEL_IDS",bParamsLabelIDList);

Bundle bParamsRule2 = new Bundle();
bParamsRule2.putString("name","Rule30");
bParamsRule2.putString("enabled","true");
bParamsRule2.putString("alldevices","true");
bParamsRule2.putString("string","cde");
bParamsRule2.putString("string_pos","3");
bParamsRule2.putString("string_len","5");

ArrayList<Bundle> bParamsList = new ArrayList<Bundle>();
bParamsList.add(bParamsRule1);
bParamsList.add(bParamsRule2);

bConfig.putParcelableArrayList("PARAM_LIST", bParamsList);

bMain.putBundle("PLUGIN_CONFIG", bConfig);

Intent i = new Intent();
i.setAction("com.symbol.datawedge.api.ACTION");
i.putExtra("com.symbol.datawedge.api.SET_CONFIG", bMain);
i.putExtra("SEND_RESULT", "true");
i.putExtra("COMMAND_IDENTIFIER", "ADF_API");
this.sendBroadcast(i);

// GET RESULT CODE
public void onReceive(Context context, Intent intent){

String command = intent.getStringExtra("COMMAND");
String commandidentifier = intent.getStringExtra("COMMAND_IDENTIFIER");
String result = intent.getStringExtra("RESULT");

Bundle bundle = new Bundle();
String resultInfo = "";
if(intent.hasExtra("RESULT_INFO")){
    bundle = intent.getBundleExtra("RESULT_INFO");
    Set<String> keys = bundle.keySet();
    for (String key: keys) {
        resultInfo += key + ": "+bundle.getString(key) + "\n";
    }
}

String text = "Command: "+command+"\n" +
        "Result: " +result+"\n" +
        "Result Info: " +resultInfo + "\n" +
        "CID:"+commandidentifier;
Toast.makeText(context, text, Toast.LENGTH_LONG).show();
};

Set/Get Result Codes

Command and configuration intent parameters determine whether to send result codes (disabled by default). When using SEND_RESULT, the COMMAND_IDENTIFIER is used to match the result code with the originating intent. Sample usage of these parameters is shown below.

Note: This generic code must be modified to match the API being used.

// send the intent
    Intent i = new Intent();
    i.setAction(ACTION);
    i.putExtra("com.symbol.datawedge.api.CREATE_PROFILE", "Profile1");

// request and identify the result code
    i.putExtra("SEND_RESULT","true");
    i.putExtra("COMMAND_IDENTIFIER","123456789");
    this.sendBroadcast(i);

// register to receive the result
    public void onReceive(Context context, Intent intent){

        String command = intent.getStringExtra("COMMAND");
        String commandidentifier = intent.getStringExtra("COMMAND_IDENTIFIER");
        String result = intent.getStringExtra("RESULT");

        Bundle bundle = new Bundle();
        String resultInfo = "";
        if(intent.hasExtra("RESULT_INFO")){
            bundle = intent.getBundleExtra("RESULT_INFO");
            Set<String> keys = bundle.keySet();
            for (String key: keys) {
                resultInfo += key + ": "+bundle.getString(key) + "\n";
            }
        }

        String text = "Command: "+command+"\n" +
                      "Result: " +result+"\n" +
                      "Result Info: " +resultInfo + "\n" +
                      "CID:"+commandidentifier;

        Toast.makeText(context, text, Toast.LENGTH_LONG).show();

    };

Use the internal imager for scanning

Bundle bConfig = new Bundle();

bConfig.putString("PLUGIN_NAME","BARCODE");

Bundle bParams = new Bundle();
bParams.putString("scanner_input_enabled", "true");
//
// auto or valid scanner identifier:
//
bParams.putString("scanner_selection_by_identifier", "INTERNAL_IMAGER");
bConfig.putBundle("PARAM_LIST",bParams);

Configure an inter-character delay

private Integer ctrlCharacterDelayValue;
private Integer genericCharacterDelayValue;
private Boolean flagExtendedASCIIOnly;

@Override
protected void onCreate(Bundle savedInstanceState) {
    super.onCreate(savedInstanceState);
    setContentView(R.layout.activity_main);

    registerReceivers();
    ctrlCharacterDelayValue = null;
    genericCharacterDelayValue = null;
    flagExtendedASCIIOnly = null;
}

private void registerReceivers() {
    IntentFilter filter = new IntentFilter();
    filter.addAction("com.symbol.datawedge.api.RESULT_ACTION");
    filter.addCategory(Intent.CATEGORY_DEFAULT);
    registerReceiver(broadcastReceiver, filter);
}

@Override
protected void onDestroy() {
    super.onDestroy();
    unregisterReceiver(broadcastReceiver);
}

//Set configuration
public void setKeystrokeOutputPluginConfiguration(View v) {

    Bundle configBundle = new Bundle();
    configBundle.putString("PROFILE_NAME","Profile0 (default)");
    configBundle.putString("PROFILE_ENABLED","true");
    configBundle.putString("CONFIG_MODE","UPDATE");

    Bundle bConfig = new Bundle();

    bConfig.putString("PLUGIN_NAME", "KEYSTROKE");
    Bundle bParams = new Bundle();
    bParams.putString("keystroke_output_enabled","true");
    if(ctrlCharacterDelayValue!=null){
        bParams.putString("keystroke_delay_control_chars",ctrlCharacterDelayValue+"");
    }
    if(genericCharacterDelayValue !=null){
        bParams.putString("keystroke_character_delay", genericCharacterDelayValue +"");
    }
    if(flagExtendedASCIIOnly!=null){
        bParams.putString("keystroke_delay_multibyte_chars_only", flagExtendedASCIIOnly +"");
    }

    bConfig.putBundle("PARAM_LIST", bParams);
    configBundle.putBundle("PLUGIN_CONFIG", bConfig);

    Intent i = new Intent();
    i.setAction("com.symbol.datawedge.api.ACTION");
    i.putExtra("com.symbol.datawedge.api.SET_CONFIG", configBundle);
    i.putExtra("SEND_RESULT", "true");
    i.putExtra("COMMAND_IDENTIFIER", "KEYSTROKE_API");
    this.sendBroadcast(i);
    }

//broadcast receiver
private BroadcastReceiver broadcastReceiver = new BroadcastReceiver() {
    @Override
    public void onReceive(Context context, Intent intent) {
        String action = intent.getAction();
        Log.d(TAG, "#DataWedge-APP# Action: " + action);


    //result of set config
        if(action.equals("com.symbol.datawedge.api.RESULT_ACTION")){
            Bundle extrasBundle = intent.getExtras();
            Set<String> keys = extrasBundle.keySet();
            if(keys!=null&&keys.contains("RESULT")){
                String result = (String)extrasBundle.get("RESULT");
                Log.d(TAG,"Result:"+result);
                //get additional info
                Bundle resultInforBundle = (Bundle) extrasBundle.get("RESULT_INFO");
                Object resultCode = resultInforBundle.get("RESULT_CODE");
                if(resultCode instanceof String){
                    String code = (String)resultCode;
                    Log.d(TAG,"Code:"+code);
                }else if(resultCode instanceof String[]){
                    String[] codesArray = (String[])resultCode;
                    if(codesArray!=null){
                        for(String code : codesArray){
                            Log.d(TAG,"Code:"+code);
                        }
                    }
                }
            }

        }//end result of set config
    }//end onReceive
};

Set Voice Input Configuration

Bundle bMain = new Bundle();
bMain.putString("PROFILE_NAME", "DWDemo");
bMain.putString("PROFILE_ENABLED", "true");
bMain.putString("CONFIG_MODE", "CREATE_IF_NOT_EXIST");

Bundle bConfig = new Bundle();
bConfig.putString("PLUGIN_NAME","VOICE");
bConfig.putString("RESET_CONFIG","false");

Bundle bParams = new Bundle();
bParams.putString("voice_input_enabled","true"); // Supported Values: true, false
bParams.putString("voice_data_capture_start_phrase","hi");
bParams.putString("voice_data_capture_end_phrase","end");
bParams.putString("voice_end_detection_timeout","3");
bParams.putString("voice_tab_command","true"); // Supported Values: true, false
bParams.putString("voice_enter_command","true"); // Supported Values: true, false
bParams.putString("voice_data_type","1");
bParams.putString("voice_start_phrase_waiting_tone","true"); // Supported Values: true, false
bParams.putString("voice_data_capture_waiting_tone","false"); // Supported Values: true, false
bParams.putString("voice_validation_window","true"); // Supported Values: true, false
bParams.putString("voice_offline_speech","true"); // Supported Values: true, false

bConfig.putBundle("PARAM_LIST", bParams);

bMain.putBundle("PLUGIN_CONFIG", bConfig); //true, false

Intent i = new Intent();
i.setAction("com.symbol.datawedge.api.ACTION");
i.putExtra("com.symbol.datawedge.api.SET_CONFIG", bMain);
i.putExtra("SEND_RESULT", "true");
i.putExtra("COMMAND_IDENTIFIER", "SET_CONFIG");
this.sendBroadcast(i);

Set Global Scanner Configuration

Bundle bConfig = new Bundle();
bConfig.putString("PLUGIN_NAME","BARCODE");

Bundle bParams = new Bundle();
bParams.putString("scanner_input_enabled", "true");
bParams.putString("configure_all_scanners", "true"); // configure for all scanners
bConfig.putBundle("PARAM_LIST", bParams);

SEE ALSO:

Zebra Support Central | Integrator Guides, Product Manuals, Software Downloads and Support

LaunchPad | Zebra Developer Community

Intent | Android Developers

Intents and Intent Filters | Android Developers

Android Intents | Tutorial