Set Config - Zebra Technologies TechDocs

SET_CONFIG

Introduced in DataWedge 6.4.

Used to create, update or replace a DataWedge Profile and its settings. Supports nested bundles. To create a Profile without configuring its settings parameters, see CREATE_PROFILE.

Function Prototype

Intent i = new Intent();
i.setAction("com.symbol.datawedge.api.ACTION");
i.putExtra("com.symbol.datawedge.api.SET_CONFIG", <mainbundle>);

Parameters

ACTION [String]: "com.symbol.datawedge.api.ACTION"

EXTRA_DATA [String]: "com.symbol.datawedge.api.SET_CONFIG"

BUNDLE: <mainbundle> (see parameters below)

MAIN BUNDLE

The main SetConfig bundle includes the following properties:

PROFILE_NAME [String]: The name of the Profile on which to perform action(s)
CONFIG_MODE [String]: (Default=OVERWRITE)
- CREATE_IF_NOT_EXIST: Creates the Profile if string in PROFILE_NAME is not present on device
- OVERWRITE: If Profile exists, resets all options to default, then configures specified settings
- UPDATE: Updates only specified settings
PROFILE_ENABLED [String]: Optional; Controls whether to enable (true) or disable (false) a Profile (default=true). If not specified, no change is made to the Profile state.
PLUGIN_CONFIG [Bundle]: A bundle (nested within the main bundle) that contains settings of a specific Plug-in
APP_LIST [Array]: List of applications and/or activities to associate with the Profile

PLUGIN_CONFIG BUNDLE

The PLUGIN_CONFIG bundle is configured using the following properties:

RESET_CONFIG [String]: Optional

True (Default) – Clear any existing configuration and create a new configuration with the specified parameter values
False – Update the existing values and add values not already in the configuration

PLUGIN_NAME [String]: Name of the Plug-in to configure. See tables below for PARAM_LIST values.

BARCODE input
INTENT output
KEYSTROKE output

To be implemented in the future:

ADF (advanced data formatting) processing
BDF (basic data formatting) processing
DCP input
IP output
MSR input
SIMULSCAN input

Notes:

Plug-in names are case sensitive.
Each intent involving a Plug-in requires a separate intent Action.

PARAM_LIST [Bundle]: A parameter list bundle nested within the PLUGIN_CONFIG bundle. Includes the list of parameters that should be updated under the specified Plug-in. Setting an empty string in any parameter value resets that parameter to its default setting.

PARAM_LIST BUNDLE

The PARAM_LIST bundle is configured by specifying the parameter name and value from the table below. Applies to parameters matching the PLUGIN_NAME specified in PLUGIN_CONFIG bundle.

BARCODE – Use values from the Scanner Input Parameters table below; specify decoder and other input settings as EXTRA_DATA in the PARAM_LIST nested bundle
INTENT - Use values as indicated below:

intent_output_enabled [string] <true/false>

intent_action [string]

intent_category [string]

intent_delivery [string] Use "0" for Start Activity, "1" for Start Service, "2" for Broadcast

KEYSTROKE - Use values from the Keystroke Output Parameters table below; specify output settings as EXTRA_DATA in the PARAM_LIST nested bundle

APP_LIST

An array of bundles that contains a set of PACKAGE_NAMES and an ACTIVITY_LIST to be associated with the Profile.

APP_LIST BUNDLE

Contains the following properties:

PACKAGE_NAME [String]: ex: "com.symbol.emdk.barcodesample1" or a wildcard (*) character

ACTIVITY_LIST [List]: A list of activities for the PACKAGE_NAME. Wildcard (*) character also supported.

Return Values

(None)

Error and debug messages are logged to the Android logging system, which can be viewed and filtered by the logcat command. Use logcat from an ADB shell to view the log messages:


$ adb logcat -s DWAPI

Error messages are logged for invalid actions and parameters

Example

//MAIN BUNDLE PROPERTIES
Bundle bMain = new Bundle();
bMain.putString("PROFILE_NAME","Profile12");
bMain.putString("PROFILE_ENABLED","true");
bMain.putString("CONFIG_MODE","CREATE_IF_NOT_EXIST");

//PLUGIN_CONFIG BUNDLE PROPERTIES
Bundle bConfig = new Bundle();
bConfig.putString("PLUGIN_NAME","BARCODE");
bConfig.putString("RESET_CONFIG","true"); 


//PARAM_LIST BUNDLE PROPERTIES
Bundle bParams = new Bundle();
    bParams.putString("scanner_selection","auto");
    bParams.putString("scanner_input_enabled","true");
// 
// NOTE: The "scanner_selection" parameter (above) supports "auto" selection
// or the assignment of a scanner device index, which is obtained by using the
// ENUMERATE_SCANNERS API.
// 
//PUT bParams into bConfig
bConfig.putBundle("PARAM_LIST", bParams);

//PUT bConfig into bMain
bMain.putBundle("PLUGIN_CONFIG", bConfig);

// APP_LIST BUNDLES
Bundle bundleApp1 = new Bundle();
bundleApp1.putString("PACKAGE_NAME","com.symbol.emdk.simulscansample1");
bundleApp1.putStringArray("ACTIVITY_LIST", new String[]{
        "com.symbol.emdk.simulscansample1.DeviceControl",
        "com.symbol.emdk.simulscansample1.MainActivity",
        "com.symbol.emdk.simulscansample1.ResultsActivity.*",
        "com.symbol.emdk.simulscansample1.ResultsActivity2",
        "com.symbol.emdk.simulscansample1.SettingsFragment1"});


Bundle bundleApp2 = new Bundle();
bundleApp2.putString("PACKAGE_NAME","com.example.intents.datawedgeintent");
bundleApp2.putStringArray("ACTIVITY_LIST", new String[]{
        "com.example.intents.datawedgeintent.DeviceControl",
        "com.example.intents.datawedgeintent.MainActivity",
        "com.example.intents.datawedgeintent.ResultsActivity",
        "com.example.intents.datawedgeintent.SettingsFragment1"});

Bundle bundleApp3 = new Bundle();
bundleApp3.putString("PACKAGE_NAME","*");
bundleApp3.putStringArray("ACTIVITY_LIST", new String[]{"*"});


Bundle bundleApp4 = new Bundle();
bundleApp4.putString("PACKAGE_NAME","com.symbol.myzebraapp");
bundleApp4.putStringArray("ACTIVITY_LIST", new String[]{"*"});

//PUT THEM ALL TOGETHER INTO THE MAIN BUNDLE
bMain.putParcelableArray("APP_LIST", new Bundle[]{
        bundleApp1
        ,bundleApp2
        ,bundleApp3
        ,bundleApp4
});

Intent i = new Intent();
i.setAction("com.symbol.datawedge.api.ACTION");
i.putExtra("com.symbol.datawedge.api.SET_CONFIG", bMain);

this.sendBroadcast(i);

Scanner Input Parameters

Important: Support for decode parameters can vary depending on the scanning device selected. For device-specific support notes, please refer to the Integrator Guide that accompanied the unit.

All parameters are case sensitive.

Param name	Param values
scanner_input_enabled	false true
trigger-wakeup	false true
scanner_selection	auto 0–n (valid scanner index from ENUMERATE_SCANNERS)
decoder_upca	false true
decoder_upce0	false true
decoder_ean13	false true
decoder_ean8	false true
decoder_code128	false true
decoder_code39	false true
decoder_i2of5	false true
decoder_gs1_databar	false true
decoder_gs1_databar_lim	false true
decoder_gs1_databar_exp	false true
decoder_datamatrix	false true
decoder_qrcode	false true
decoder_pdf417	false true
decoder_composite_ab	false true
decoder_composite_c	false true
decoder_microqr	false true
decoder_aztec	false true
decoder_maxicode	false true
decoder_micropdf	false true
decoder_uspostnet	false true
decoder_usplanet	false true
decoder_uk_postal	false true
decoder_japanese_postal	false true
decoder_australian_postal	false true
decoder_canadian_postal	false true
decoder_dutch_postal	false true
decoder_us4state	false true
decoder_us4state_fics	false true
decoder_codabar	false true
decoder_msi	false true
decoder_code93	false true
decoder_trioptic39	false true
decoder_d2of5	false true
decoder_chinese_2of5	false true
decoder_korean_3of5	false true
decoder_code11	false true
decoder_tlc39	false true
decoder_mailmark	false true
decoder_hanxin	false true
decoder_signature	false true
decoder_webcode	false true
decoder_matrix_2of5	false true
decoder_upce1	false true
decoder_upca_report_check_digit	false true
decoder_upca_preamble	0 - Preamble None 1 - Preamble Sys Char 2 - Preamble Country and Sys Char
decoder_upce0_report_check_digit	false true
decoder_upce0_preamble	0 - Preamble None 1 - Preamble Sys Char 2 - Preamble Country and Sys Char
decoder_upce0_convert_to_upca	false true
decoder_ean8_convert_to_ean13	false true
decoder_code128_length1	Integer from 0–55
decoder_code128_length2	Integer from 0–55
decoder_code128_redundancy	false true
decoder_code128_enable_plain	false true
decoder_code128_enable_ean128	false true
decoder_code128_enable_isbt128	false true
decoder_code128_isbt128_concat_mode	0 - Concat Mode Never 1 - Concat Mode Always 2 - Concat Mode Auto
decoder_code128_check_isbt_table	false true
decoder_code128_security_level	0 - Security Level 0 1 - Security Level 1 2 - Security Level 2 3 - Security Level 3
code128_enable_marginless_decode	false true
code128_ignore_fnc4	false true
decoder_code39_length1	Integer from 0–55
decoder_code39_length2	Integer from 0–55
decoder_code39_verify_check_digit	false true
decoder_code39_report_check_digit	false true
decoder_code39_full_ascii	false true
decoder_code39_redundancy	false true
decoder_code39_convert_to_code32	false true
decoder_code39_report_code32_prefix	false true
decoder_code39_security_level	0 - Security Level 0 1 - Security Level 1 2 - Security Level 2 3 - Security Level 3
code39_enable_marginless_decode	false true
decoder_i2of5_length1	Integer from 0–55
decoder_i2of5_length2	Integer from 0–55
decoder_i2of5_redundancy	false true
decoder_i2of5_check_digit	0 - No Check Digit 1 - USS Check Digit 2 - OPCC Check Digit
decoder_i2of5_report_check_digit	false true
decoder_itf14_convert_to_ean13	false true
decoder_i2of5_security_level	0 - Security Level 0 1 - Security Level 1 2 - Security Level 2 3 - Security Level 3
i20f5_enable_marginless_decode	false true
decoder_gs1_lim_security_level	1 - Security Level 1 2 - Security Level 2 3 - Security Level 3 4 - Security Level 4
decoder_composite_ab_ucc_link_mode	0 - Link Flag Ignored 1 - Always Linked 2 - Auto Discriminate
decoder_uk_postal_report_check_digit	false true
decoder_codabar_length1	Integer from 0–55
decoder_codabar_length2	Integer from 0–55
decoder_codabar_redundancy	false true
decoder_codabar_clsi_editing	false true
decoder_codabar_notis_editing	false true
decoder_msi_length1	Integer from 0–55
decoder_msi_length2	Integer from 0–55
decoder_msi_redundancy	false true
decoder_msi_check_digit	0 - One Check Digit 1 - Two Check Digit
decoder_msi_check_digit_scheme	0 - Mod-11-10 1 - Mod-10-10
decoder_msi_report_check_digit	false true
decoder_code93_length1	Integer from 0–55
decoder_code93_length2	Integer from 0–55
decoder_code93_redundancy	false true
decoder_trioptic39_redundancy	false true
decoder_d2of5_length1	Integer from 0–55
decoder_d2of5_length2	Integer from 0–55
decoder_d2of5_redundancy	false true
decoder_code11_length1	Integer from 0–55
decoder_code11_length2	Integer from 0–55
decoder_code11_redundancy	false true
decoder_code11_verify_check_digit	0 - No Check Digit 1 - 1 Check Digit 2 - 2 Check Digits
decoder_code11_report_check_digit	false true
decoder_hanxin_inverse	0 - Disable 1 - Enable 2 - Auto
decoder_matrix_2of5_length1	Integer from 0–55
decoder_matrix_2of5_length2	Integer from 0–55
decoder_matrix_2of5_redundancy	false true
decoder_matrix_2of5_report_check_digit	false true
decoder_matrix_2of5_verify_check_digit	false true
decoder_upce1_report_check_digit	false true
decoder_upce1_preamble	0 - Preamble None 1 - Preamble Sys Char 2 - Preamble Country and Sys Char
decoder_upce1_convert_to_upca	false true
upcean_security_level	0 - Level 0 1 - Level 1 2 - Level 2 3 - Level 3
upcean_supplemental2	false true
upcean_supplemental5	false true
upcean_supplemental_mode	0 - No Supplementals 1 - Supplemental Always 2 - Supplemental Auto 3 - Supplemental Smart 4 - Supplemental 378-379 5 - Supplemental 978-979 6 - Supplemental 414-419-434-439 7 - Supplemental 977
upcean_retry_count	Integer from 2 to 20
upcean_random_weight_check_digit	false true
upcean_linear_decode	false true
upcean_bookland	false true
upcean_coupon	false true
upcean_coupon_report	0 - Old Coupon Report Mode 1 - New Coupon Report Mode 2 - Both Coupon Report Modes
upcean_ean_zero_extend	false true
upcean_bookland_format	0 - Format ISBN-10 1 - Format ISBN-13
databar_to_upc_ean	false true
upc_enable_marginless_decode	false true
aim_mode	on - On off - Off
beam_timer	Integer from 0–60000
Adaptive_Scanning	1 - Disable 0 - Enable
Beam_Width	0 - Narrow 1 - Normal 2 - Wide
power_mode	0 - Low Power Mode 1 - Optimized Power Mode 2 - High Power Mode 3 - Always On
mpd_mode	0 - Disable Mobile Phone Display Mode 3 - Enable Mobile Phone Display Mode
reader_mode	7 - Presentation Mode 0 - Triggered Mode
linear_security_level	1 - Security Short Or Codabar 2 - Security All Twice 3 - Security Long And Short 4 - Security All Thrice
picklist	0 - Disabled 1 – Enabled/HW picklist 2 – Software Picklist
aim_type	0 - Trigger 1 - Timed Hold 2 - Timed Release 3 - Press And Release 5 - Continuous Read
aim_timer	Integer from 0–60000
same_barcode_timeout	Integer from 0–5000
different_barcode_timeout	Integer from 0–5000
illumination_mode	off - Off torch - On
lcd_mode	0 - Disabled 3 - Enabled
low_power_timeout	Integer from 0–1000
delay_to_low_power_mode	16 - 1 Second 29 - 30 Seconds 32 - 1 Minute 37 - 5 Minutes
illumination_brightness	Integer from 0–10
inverse_1d_mode	0 - Disable 1 - Enable 2 - Auto
viewfinder_size	Integer from 0–100
viewfinder_posx	Integer from 0–100
viewfinder_posy	Integer from 0–100
1d_marginless_decode_effort_level	0 - Level 0 1 - Level 1 2 - Level 2 3 - Level 3
poor_quality_bcdecode_effort_level	0 - Level 0 1 - Level 1 2 - Level 2 3 - Level 3
charset_name	ISO-8859-1 - ISO-8859-1 Shift_JIS - Shift_JIS UTF-8 - UTF-8
viewfinder_mode	1 - Viewfinder Enabled 2 - Static Reticle
code_id_type	0 - Code Id Type None 1 - Code Id Type Aim 2 - Code Id Type Symbol
volume_slider_type	0 - Ringer 1 - Music and Media 2 - Alarms 3 - Notification
decode_audio_feedback_uri	URI – Can be a query of the available URIs from RingToneManager
decode_haptic_feedback	false true
bt_disconnect_on_exit	false true
connection_idle_time	Integer from 0–1800
establish_connection_time	Integer from 30–60
remote_scanner_audio_feedback_mode	Integer from 0–3
remote_scanner_led_feedback_mode	Integer from 0–3
display_bt_address_barcode	false true
good_decode_led_timer	Integer from 0–1000
decoding_led_feedback	false true
decoder_usplanet_report_check_digit	false true

Important: Support for decode parameters can vary depending on the scanning device selected. For device-specific support notes, please refer to the Integrator Guide that accompanied the unit.

Keystroke Output Parameters

Param name	Param values
keystroke_output_enabled	false true
keystroke_action_char	NONE - ASCII_NO_VALUE TAB - ASCII_TAB_VALUE LF - ASCII_LF_VALUE CR - ASCII_CR_VALUE
keystroke_delay_extended_ascii	Integer from 0–1000
keystroke_delay_control_chars	Integer from 0–1000

SEE ALSO:

Zebra Support Central | Integrator Guides, Product Manuals, Software Downloads and Support

LaunchPad | Zebra Developer Community

Intent | Android Developers

Intents and Intent Filters | Android Developers

Android Intents | Tutorial