SOFT_SCAN_TRIGGER
Used to start, stop or toggle a software scanning trigger.
Functional only when Barcode Input is enabled in the active Profile.
Function Prototype
For single scanner:
Intent i = new Intent();
i.setAction("com.symbol.datawedge.api.ACTION");
i.putExtra("com.symbol.datawedge.api.SOFT_SCAN_TRIGGER", "<parameter>");
For multiple scanner support, the SOFT_SCAN_TRIGGER intent must include extra scanner_selection_by_identifier indicating the scanner to be used:
Intent i = new Intent();
i.setAction("com.symbol.datawedge.api.ACTION");
i.putExtra("scanner_selection_by_identifier", "BLUETOOTH_RS6000");
i.putExtra("com.symbol.datawedge.api.SOFT_SCAN_TRIGGER", "TOGGLE_SCANNING");
sendBroadcast(i);
Parameters
ACTION [String]: "com.symbol.datawedge.api.ACTION"
EXTRA_DATA [String]: "com.symbol.datawedge.api.SOFT_SCAN_TRIGGER"
<parameter>: The parameter as a string, using any of the following:
START_SCANNING- starts scanning when triggeredSTOP_SCANNING- stops or interrupts scanning when triggeredTOGGLE_SCANNING- toggles betweenSTART_SCANNINGandSTOP_SCANNINGwhen triggered
Result Codes
DataWedge returns the following error codes if the app includes the intent extras SEND_RESULT and COMMAND_IDENTIFIER to enable the app to get results using the DataWedge result intent mechanism. See Example, below.
- DATAWEDGE_DISABLED - FAILURE
- INPUT_NOT_ENABLED - FAILURE
- PARAMETER_INVALID - FAILURE
- PROFILE_DISABLED - FAILURE
Also see the Result Codes guide for more information.
Example Code
// define action and data strings
String softScanTrigger = "com.symbol.datawedge.api.ACTION";
String extraData = "com.symbol.datawedge.api.SOFT_SCAN_TRIGGER";
// create the intent
Intent i = new Intent();
// set the action to perform
i.setAction(softScanTrigger);
// add additional info
i.putExtra(extraData, "START_SCANNING");
// send the intent to DataWedge
this.sendBroadcast(i);
Sample 'SCANNER_STATUS' Notification
Soft scan trigger commands might be ignored if the scanner is busy at the time a command is executed. Zebra recommends using the SCANNER_STATUS parameter of the NOTIFICATION API to signal that the scanner is ready. Use the sample code below:
@Override
protected void onCreate(Bundle savedInstanceState) {
super.onCreate(savedInstanceState);
setContentView(R.layout.activity_main);
registerReceivers();
}
@Override
protected void onResume(){
super.onResume();
switchToProfile();
}
public static final String ACTION = "com.symbol.datawedge.api.ACTION";
public static final String NOTIFICATION_ACTION = "com.symbol.datawedge.api.NOTIFICATION_ACTION";
public static final String NOTIFICATION_TYPE_SCANNER_STATUS = "SCANNER_STATUS";
public static final String SCAN_STATUS_WAITING = "WAITING";
public static final String NOTIFICATION_TYPE_PROFILE_SWITCH = "PROFILE_SWITCH";
public static final String ACTION_EXTRA_REGISTER_FOR_NOTIFICATION = "com.symbol.datawedge.api.REGISTER_FOR_NOTIFICATION";
public static final String ACTION_EXTRA_UNREGISTER_FOR_NOTIFICATION = "com.symbol.datawedge.api.UNREGISTER_FOR_NOTIFICATION";
private void registerReceivers() {
IntentFilter filter = new IntentFilter();
filter.addAction(NOTIFICATION_ACTION);
registerReceiver(broadcastReceiver, filter);
registerForScannerStatus();
}
@Override
protected void onDestroy() {
super.onDestroy();
unregisterReceiver(broadcastReceiver);
unRegisterForScannerStatus();
}
private BroadcastReceiver broadcastReceiver = new BroadcastReceiver() {
@Override
public void onReceive(Context context, Intent intent) {
String action = intent.getAction();
Log.d(TAG, "#DataWedge-APP# Action: " + action);
if(action.equals(NOTIFICATION_ACTION)){
// handle notification
if(intent.hasExtra("com.symbol.datawedge.api.NOTIFICATION")) {
Bundle b = intent.getBundleExtra("com.symbol.datawedge.api.NOTIFICATION");
String NOTIFICATION_TYPE = b.getString("NOTIFICATION_TYPE");
if(NOTIFICATION_TYPE!= null) {
switch (NOTIFICATION_TYPE) {
case NOTIFICATION_TYPE_SCANNER_STATUS:
Log.d(TAG, "SCANNER_STATUS: status: " + b.getString("STATUS") + ", profileName: " + b.getString("PROFILE_NAME"));
String status = b.getString("STATUS");
if(status!=null && status.equals(SCAN_STATUS_WAITING)){
//toggle scanner when scanner is ready
scanToggle();
unRegisterForScannerStatus();
}
break;
case NOTIFICATION_TYPE_PROFILE_SWITCH:
Log.d(TAG, "PROFILE_SWITCH: profileName: " + b.getString("PROFILE_NAME") + ", profileEnabled: " + b.getBoolean("PROFILE_ENABLED"));
break;
}
}
}
}
}
};
public void registerForScannerStatus() {
Bundle b = new Bundle();
b.putString("com.symbol.datawedge.api.APPLICATION_NAME", "com.dwapi.dwnotifiation");
b.putString("com.symbol.datawedge.api.NOTIFICATION_TYPE", NOTIFICATION_TYPE_SCANNER_STATUS);
Intent i = new Intent();
i.setAction(ACTION);
i.putExtra(ACTION_EXTRA_REGISTER_FOR_NOTIFICATION, b);
this.sendBroadcast(i);
}
public void unRegisterForScannerStatus() {
Bundle b = new Bundle();
b.putString("com.symbol.datawedge.api.APPLICATION_NAME", "com.dwapi.dwnotifiation");
b.putString("com.symbol.datawedge.api.NOTIFICATION_TYPE", NOTIFICATION_TYPE_SCANNER_STATUS);
Intent i = new Intent();
i.setAction(ACTION);
i.putExtra(ACTION_EXTRA_UNREGISTER_FOR_NOTIFICATION, b);
this.sendBroadcast(i);
}
public void switchToProfile(){
Intent i = new Intent();
i.setAction(ACTION);
i.putExtra("com.symbol.datawedge.api.SWITCH_TO_PROFILE","Launcher");
this.sendBroadcast(i);
}
public void scanToggle(){
Intent i = new Intent();
i.setAction(ACTION);
i.putExtra("com.symbol.datawedge.api.SOFT_SCAN_TRIGGER","TOGGLE_SCANNING");
this.sendBroadcast(i);
}
Delay code
Execution of the soft scan trigger command should be sufficiently delayed to enable the scanner to complete existing tasks before being asked to perform another. As an alternative to scanner status notification (explained above), delay code similar to that shown below could be used:
// SAMPLE DELAY CODE
int triggerDelay = 250; // delay in milliseconds
Handler handler = new Handler();
handler.postDelayed(new Runnable() {
public void run() {
// for clarity, assume the following method contains the code in the example above
startSoftScan();
}
}, triggerDelay);
Note: While generally effective for this purpose, delay code can work inconsistently across devices.
Generate and receive results
Command and configuration intent parameters determine whether to send result codes (disabled by default). When using SEND_RESULT, the COMMAND_IDENTIFIER is used to match the result code with the originating intent. Sample usage of these parameters is shown below.
Note: Modify this generic code to match the API being used.
// send the intent
Intent i = new Intent();
i.setAction(ACTION);
i.putExtra("com.symbol.datawedge.api.CREATE_PROFILE", "Profile1");
// request and identify the result code
i.putExtra("SEND_RESULT","true");
i.putExtra("COMMAND_IDENTIFIER","123456789");
this.sendBroadcast(i);
// register to receive the result
public void onReceive(Context context, Intent intent){
String command = intent.getStringExtra("COMMAND");
String commandidentifier = intent.getStringExtra("COMMAND_IDENTIFIER");
String result = intent.getStringExtra("RESULT");
Bundle bundle = new Bundle();
String resultInfo = "";
if(intent.hasExtra("RESULT_INFO")){
bundle = intent.getBundleExtra("RESULT_INFO");
Set<String> keys = bundle.keySet();
for (String key: keys) {
resultInfo += key + ": "+bundle.getString(key) + "\n";
}
}
String text = "Command: "+command+"\n" +
"Result: " +result+"\n" +
"Result Info: " +resultInfo + "\n" +
"CID:"+commandidentifier;
Toast.makeText(context, text, Toast.LENGTH_LONG).show();
};
Multi-scanner mode
For multi-scanner mode, the Soft Scan Trigger intent is required to include the specific scanner to be used with intent extra "scanner_selection_by_identifier".
Intent i = new Intent();
i.setAction("com.symbol.datawedge.api.ACTION");
i.putExtra("scanner_selection_by_identifier", "BLUETOOTH_RS6000");
i.putExtra("com.symbol.datawedge.api.SOFT_SCAN_TRIGGER", "TOGGLE_SCANNING");
sendBroadcast(i);
SEE ALSO:
Zebra Support Central | Integrator Guides, Product Manuals, Software Downloads and Support
LaunchPad | Zebra Developer Community
Intent | Android Developers
Intents and Intent Filters | Android Developers
Android Intents | Tutorial