A B C D E F G H I J K L M N O P R S T U V W X Y Z 

A

abort(boolean) - Method in interface com.zebra.sdk.zmotif.job.JobUtilZmotif
Aborts a print job.
ACTIVE_LUT - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Active LUT.
addConnectionType(Class<? extends Connection>) - Static method in class com.zebra.sdk.comm.ConnectionBuilder
Add a connection type to the ConnectionBuilder
address - Variable in class com.zebra.sdk.common.card.containers.NetworkInfo
IP address.
Note: If setting the value, you must also disable DHCP.
address - Variable in class com.zebra.sdk.common.card.containers.WirelessNetworkInfo
IP address (read-only).
address - Variable in class com.zebra.sdk.printer.discovery.DiscoveredPrinter
MAC address, IP Address, or local name of printer.
addWriteLogStream(OutputStream) - Method in class com.zebra.sdk.comm.ConnectionA
 
addWriteLogStream(OutputStream) - Method in interface com.zebra.sdk.comm.ConnectionWithWriteLogging
Adds the OutputStream to the connection to log all data written to the connected device.
alarmCode - Variable in class com.zebra.sdk.common.card.containers.BarcodeReadInfo
Current printer alarm code.
AlarmEvent(AlarmInfo) - Method in interface com.zebra.sdk.common.card.containers.AlarmHandler
Invoked when an alarm condition is detected.
AlarmHandler - Interface in com.zebra.sdk.common.card.containers
This interface is used to signal when an alarm condition has occurred.
AlarmInfo - Class in com.zebra.sdk.common.card.containers
Container holding information about a printer alarm or error condition.
AlarmInfo() - Constructor for class com.zebra.sdk.common.card.containers.AlarmInfo
 
alarmInfo - Variable in class com.zebra.sdk.common.card.containers.JobStatusInfo
Current printer alarm information.
alarmInfo - Variable in class com.zebra.sdk.common.card.containers.PrinterStatusInfo
Current printer alarm information.
ATM_MODE - Static variable in class com.zebra.sdk.zxp.settings.ZebraCardSettingNamesZxp
ATM mode.
ATMMode - Enum in com.zebra.sdk.common.card.enumerations
Gets or sets the card feeder source.
For ZXP Series 1 and 3 only.

B

BARCODE_INIT_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Barcode: Reader initialization error
BARCODE_INVALID_INCOMPLETE_DATA_READ - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Barcode: Invalid/incomplete data read
BARCODE_NO_DATA_READ - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Barcode: No data read
barcodeData - Variable in class com.zebra.sdk.common.card.containers.BarcodeReadInfo
Barcode data.
BarcodeReadInfo - Class in com.zebra.sdk.common.card.containers
Class for holding information read from the barcode.
BarcodeReadInfo() - Constructor for class com.zebra.sdk.common.card.containers.BarcodeReadInfo
Instantiates the BarcodeReadInfo class.
barcodeType - Variable in class com.zebra.sdk.common.card.containers.BarcodeReadInfo
Barcode symbology type.
BarcodeUtil - Interface in com.zebra.sdk.common.card.graphics.barcode
Base interface used for drawing a barcode.
BaselinePosition - Enum in com.zebra.sdk.common.card.graphics.barcode.enumerations
Enumeration for the alignment of bars when the heights are not uniform.
BEMF_POTENTIOMETER - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
BEMF potentiometer.
bottomDouble - Variable in class com.zebra.sdk.common.card.containers.TransferTemps
Bottom double-sided temperature offset.
bottomSingle - Variable in class com.zebra.sdk.common.card.containers.TransferTemps
Bottom single-sided temperature offset.
bottomTemp - Variable in class com.zebra.sdk.common.card.containers.LaminatorAdjustments
Bottom laminate temperature offset.
bssid - Variable in class com.zebra.sdk.common.card.containers.WirelessAccessPointInfo
Wireless BSSID.
bssid - Variable in class com.zebra.sdk.common.card.containers.WirelessNetworkInfo
BSSID (read-only).
build(String) - Static method in class com.zebra.sdk.comm.ConnectionBuilder
Creates a Connection type based on the contents of descriptionString.
bytesAvailable() - Method in interface com.zebra.sdk.comm.Connection
Returns an estimate of the number of bytes that can be read from this connection without blocking.
bytesAvailable() - Method in class com.zebra.sdk.comm.ConnectionA
 
bytesAvailable() - Method in class com.zebra.sdk.comm.UsbConnection
Returns number of bytes currently read from printer.

C

CAL_LUT_1 - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Calibration LUT 1 prefix.
CAL_LUT_2 - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Calibration LUT 2 prefix.
CAL_LUT_CURRENT_NAME - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Calibration LUT current name.
CAL_LUT_DEFAULT_NAME - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Calibration LUT default name.
CAL_LUT_TYPE - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Calibration LUT type.
calibrateLaminate() - Method in interface com.zebra.sdk.zmotif.device.LaminatorUtilZmotif
Calibrates the laminator.
CalibrationTable - Enum in com.zebra.sdk.common.card.enumerations
Specifies a specific calibration table contained in the printer.
For ZMotif Series printers only.
cancel(int) - Method in interface com.zebra.sdk.common.card.job.JobUtil
Cancels all jobs or a specific job.
CapabilitiesType - Enum in com.zebra.sdk.common.card.enumerations
Specifies the type of printer capabilities to request.
For ZMotif and ZC Series printers only.
CARD_CENTER_X_OFFSET - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Card center x-offset.
CARD_CENTER_Y_OFFSET - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Card center y-offset.
CARD_DESTINATION - Static variable in class com.zebra.sdk.common.card.jobSettings.ZebraCardJobSettingNames
Card destination.
CARD_FEEDER_MODE - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Card feeder mode.
For ZC Series printers only.
CARD_PART_NUMBER - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Custom card part number.
CARD_SOURCE - Static variable in class com.zebra.sdk.common.card.jobSettings.ZebraCardJobSettingNames
Card source.
CARD_THICKNESS - Static variable in class com.zebra.sdk.zmotif.job.ZebraCardJobSettingNamesZmotif
Card thickness.
CARD_TRANSFER_END_Y_OFFSET - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Card transfer end y-offset.
CARD_TRANSFER_ROLL_Y_OFFSET - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Card transfer roll y-offset.
CARD_TRANSFER_START_Y_OFFSET - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Card transfer start y-offset.
CARD_TYPE - Static variable in class com.zebra.sdk.zmotif.job.ZebraCardJobSettingNamesZmotif
Card type.
CardConnectionReestablisher - Interface in com.zebra.sdk.comm
Defines methods used to reestablish a connection to a printer that may have been closed.
cardCounterInfo - Variable in class com.zebra.sdk.common.card.containers.CardCountInfo
Returns a Map object containing all of the printer's card counters.

Note: The returned card counter names and values will vary by printer model.
Key = card counter name. Value = card counter value.
CardCountInfo - Class in com.zebra.sdk.common.card.containers
Container holding the printer's card count information.
CardCountInfo() - Constructor for class com.zebra.sdk.common.card.containers.CardCountInfo
 
cardDestination - Variable in class com.zebra.sdk.common.card.containers.JobConfigInfo
Card destination - CardDestination.
CardDestination - Enum in com.zebra.sdk.common.card.enumerations
Specifies the destination of the card following job completion.
CardFirmwareUpdateHandler - Interface in com.zebra.sdk.printer
Handler class used to update status while performing a firmware download and to notify the caller when the printer has reconnected after restarting.
cardPosition - Variable in class com.zebra.sdk.common.card.containers.JobStatusInfo
Current card position.
For ZMotif and ZC Series printers only.
Example values: not_in_printer, feeding, in_process, printing, mag_write, mag_retrace, mag_read, read_ein, smart_encode, ejecting_eject, laminate_insert, done_ok
CardPrinterReconnectionHandler - Interface in com.zebra.sdk.printer
Interface definition for a callback to be invoked when a printer comes back online and has been rediscovered.
CardSide - Enum in com.zebra.sdk.common.card.enumerations
Specifies the card side to be used for the desired operation.
cardsInRejectBin - Variable in class com.zebra.sdk.common.card.containers.CardCountInfo
Number of cards sent to the reject bin.
For ZMotif and ZC Series printers only.
cardsLaminated - Variable in class com.zebra.sdk.common.card.containers.LaminatorCardCountInfo
Number of cards that have been laminated.
cardSource - Variable in class com.zebra.sdk.common.card.containers.JobConfigInfo
Card feed source - CardSource.
CardSource - Enum in com.zebra.sdk.common.card.enumerations
Specifies the card source location.
cardsProcessed - Variable in class com.zebra.sdk.common.card.containers.LaminatorCardCountInfo
Number of cards processed through the laminator.
cardsRejected - Variable in class com.zebra.sdk.common.card.containers.CardCountInfo
Number of cards rejected.
For ZMotif and ZC Series printers only.
cardThickness - Variable in class com.zebra.sdk.common.card.containers.JobConfigInfo
Thickness of cards (mil).
For ZMotif Series re-transfer printers only.
cardType - Variable in class com.zebra.sdk.common.card.containers.JobConfigInfo
Card type.
For ZMotif Series re-transfer printers only.
CardTypeInfo - Class in com.zebra.sdk.common.card.containers
Class for getting and/or setting card type information.
For ZMotif Series re-transfer printers only.
contained in DeviceUtilZmotif
CardTypeInfo() - Constructor for class com.zebra.sdk.common.card.containers.CardTypeInfo
Instantiates the CardTypeInfo class.
CFG_COPY_ACTIVE_TO_BACKUP_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
CFG: Copy active configuration to backup error
CFG_COPY_ACTIVE_TO_COPY_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
CFG: Copy active configuration to configuration copy error
CFG_COPY_ACTIVE_TO_FACTORY_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
CFG: Copy active configuration to factory error
CFG_COPY_BACKUP_TO_ACTIVE_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
CFG: Copy backup configuration to active configuration error
CFG_COPY_COPY_TO_ACTIVE_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
CFG: Copy configuration copy to active configuration error
CFG_PARSE_DOM_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
CFG: Parse DOM error
CFG_READ_ACTIVE_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
CFG: Read active configuration error
CFG_READ_BACKUP_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
CFG: Read backup configuration error
CFG_READ_COPY_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
CFG: Reader configuration copy error
CFG_READ_DEFAULTS_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
CFG: Read configuration defaults error
CFG_READ_INTO_DOM_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
CFG: Read configuration into DOM error
CFG_VERSION_MISMATCH - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
CFG: Version mismatch
CFG_WRITE_FROM_DOM_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
CFG: Write from DOM error
channel - Variable in class com.zebra.sdk.common.card.containers.WirelessAccessPointInfo
Wireless channel.
channel - Variable in class com.zebra.sdk.common.card.containers.WirelessNetworkInfo
Channel (read-only).
checkForAlarm() - Method in interface com.zebra.sdk.common.card.device.DeviceUtil
Gets the printer's current alarm code.
ChecksumMode - Enum in com.zebra.sdk.common.card.graphics.barcode.enumerations
Enumeration type for the checksum policy.
CLEAN_ALCOHOL_CARD_THRESHOLD - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Clean with alcohol card threshold level.
For ZC Series printers only.
CLEAN_DEADLINE_ENFORCEMENT - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Clean printer deadline enforcment level.
For ZC Series printers only.
CLEAN_LAMINATOR_HEATED_ROLLERS - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Clean laminator heated rollers threshold.
CLEAN_LAMINATOR_X_CARD_PATH - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Clean laminator x-direction card path threshold.
CLEAN_PRE_WARNING_THRESHOLD - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Clean pre-warning threshold.
CLEAN_PRINTHEAD_LAPPING - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Clean printhead lapping threshold.
CLEAN_PRINTHEAD_LAPPING_ENABLE - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Clean printhead lapping enabled threshold.
CLEAN_TRANSFER_ROLLERS - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Clean transfer rollers threshold.
CLEAN_X_CARD_PATH - Static variable in class com.zebra.sdk.common.card.settings.ZebraCardSettingNames
Clean x-direction card path threshold.
CLEAN_Y_CARD_PATH - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Clean y-direction card path threshold.
CleaningPath - Enum in com.zebra.sdk.common.card.enumerations
Specifies a cleaning path for the cleaning operation.
clear() - Method in class com.zebra.sdk.common.card.graphics.ZebraCardGraphics
 
clear() - Method in interface com.zebra.sdk.common.card.graphics.ZebraGraphicsI
Clears user-set parameters.
clearError() - Method in interface com.zebra.sdk.zmotif.device.DeviceUtilZmotif
Clears the printer error and returns the printer alarm information.
clearOCPDisplay(boolean) - Method in interface com.zebra.sdk.common.card.device.DeviceUtil
Clears any custom line data from the OCP and returns it to the main view.
For ZXP Series 1 and 3 and ZMotif Series 7, 8, and 9 printers only.
clearRejectBinCounter() - Method in interface com.zebra.sdk.zmotif.device.DeviceUtilZmotif
Clears the printer's reject bin counter.
CLOCK_DAY - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Clock day.
CLOCK_HOUR - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Clock hour.
CLOCK_MINUTE - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Clock minute.
CLOCK_MONTH - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Clock month.
CLOCK_YEAR - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Clock year.
clone() - Method in class com.zebra.sdk.common.card.graphics.ZebraCardGraphics
 
close() - Method in interface com.zebra.sdk.comm.Connection
Closes this connection and releases any system resources associated with the connection.
close() - Method in class com.zebra.sdk.comm.ConnectionA
 
close() - Method in class com.zebra.sdk.comm.UsbConnection
 
close() - Method in class com.zebra.sdk.common.card.graphics.ZebraCardGraphics
 
close() - Method in interface com.zebra.sdk.common.card.graphics.ZebraGraphicsI
Releases all resources.
CNTR_COPY_ACTIVE_TO_BACKUP - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
CNTR: Copy active counters to backup
CNTR_COPY_BACKUP_TO_ACTIVE - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
CNTR: Copy backup counters to active counters
CNTR_PARSE_DOM_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
CNTR: Parse DOM error
CNTR_READ_FILE_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
CNTR: Read file error
CNTR_READ_INTO_DOM_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
CNTR: Read into DOM error
CNTR_WRITE_FROM_DOM_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
CNTR: Write from DOM error
Code128CharacterSet - Enum in com.zebra.sdk.common.card.graphics.barcode.enumerations
Specifies the character set to use in the Code 128 symbology.
Code128Util - Interface in com.zebra.sdk.common.card.graphics.barcode
Interface used to configure and draw a Code 128 barcode.
Code39Util - Interface in com.zebra.sdk.common.card.graphics.barcode
Interface used to configure and draw a Code 39 barcode.
CodeCodabarUtil - Interface in com.zebra.sdk.common.card.graphics.barcode
Interface used to configure and draw a Codabar barcode.
CodeDataMatrixUtil - Interface in com.zebra.sdk.common.card.graphics.barcode
Interface used to configure and draw a DataMatrix barcode.
CodeEAN128Util - Interface in com.zebra.sdk.common.card.graphics.barcode
Interface used to configure and draw an EAN 128 barcode.
CodeEANUtil - Interface in com.zebra.sdk.common.card.graphics.barcode
Base EAN and UPC barcode interface.
CodeInterleaved2Of5Util - Interface in com.zebra.sdk.common.card.graphics.barcode
Interface used to configure and draw an Interleaved 2 of 5 barcode.
CodePDF417Util - Interface in com.zebra.sdk.common.card.graphics.barcode
Interface used to configure and draw a PDF417 barcode.
CodePostnetUtil - Interface in com.zebra.sdk.common.card.graphics.barcode
Interface used to configure and draw a Postnet barcode.
CodeQRUtil - Interface in com.zebra.sdk.common.card.graphics.barcode
Interface used to configure and draw a QR Code barcode.
coercivity - Variable in class com.zebra.sdk.common.card.containers.CardTypeInfo
Type of coercivity ("high" or "low").
coercivity - Variable in class com.zebra.sdk.common.card.containers.MagConfigInfo
CoercivityType of magnetic card (high or low).
CoercivityType - Enum in com.zebra.sdk.common.card.enumerations
Specifies the coercivity type for magnetic encoding.
COLOR_PREHEAT - Static variable in class com.zebra.sdk.zmotif.job.ZebraCardJobSettingNamesZmotif
The amount of baseline energy used on the non-printed (white areas) of the card for YMC printing.
colorImage - Variable in class com.zebra.sdk.common.card.graphics.containers.ExtractedImages
Extracted color image data (24bpp).
com.zebra.sdk.comm - package com.zebra.sdk.comm
Provides implementation for communication protocols.
com.zebra.sdk.common.card.containers - package com.zebra.sdk.common.card.containers
Provides containers for Zebra card printer objects.
com.zebra.sdk.common.card.device - package com.zebra.sdk.common.card.device
Provides interfaces for implementing card devices.
com.zebra.sdk.common.card.enumerations - package com.zebra.sdk.common.card.enumerations
Provides card printer enumerated objects.
com.zebra.sdk.common.card.errors - package com.zebra.sdk.common.card.errors
Defines Zebra card printer error codes.
com.zebra.sdk.common.card.exceptions - package com.zebra.sdk.common.card.exceptions
Provides card printer exception classes.
com.zebra.sdk.common.card.graphics - package com.zebra.sdk.common.card.graphics
Provides interfaces for card printer graphics utilities.
com.zebra.sdk.common.card.graphics.barcode - package com.zebra.sdk.common.card.graphics.barcode
Provides interfaces for card printer barcode generation.
com.zebra.sdk.common.card.graphics.barcode.enumerations - package com.zebra.sdk.common.card.graphics.barcode.enumerations
Enumerations used within card printer barcode generation
com.zebra.sdk.common.card.graphics.containers - package com.zebra.sdk.common.card.graphics.containers
Provides containers for card printer graphics functions.
com.zebra.sdk.common.card.graphics.enumerations - package com.zebra.sdk.common.card.graphics.enumerations
Provides enumerations for card printer graphics functions.
com.zebra.sdk.common.card.job - package com.zebra.sdk.common.card.job
Provides interfaces for card print job related functions.
com.zebra.sdk.common.card.job.template - package com.zebra.sdk.common.card.job.template
Utility package to support template printing within Zebra card printers
com.zebra.sdk.common.card.jobSettings - package com.zebra.sdk.common.card.jobSettings
Provides implementation for applying and retrieving print job settings for a device.
com.zebra.sdk.common.card.printer - package com.zebra.sdk.common.card.printer
Provides interfaces for card printer related functions.
com.zebra.sdk.common.card.printer.discovery - package com.zebra.sdk.common.card.printer.discovery
Provides interfaces for discovering Zebra card printers.
com.zebra.sdk.common.card.settings - package com.zebra.sdk.common.card.settings
Provides implementation for applying and retrieving settings from a device.
com.zebra.sdk.common.card.template - package com.zebra.sdk.common.card.template
Utility package to support template printing within Zebra card printers
com.zebra.sdk.device - package com.zebra.sdk.device
Provides implementation for device operations
com.zebra.sdk.printer - package com.zebra.sdk.printer
 
com.zebra.sdk.printer.discovery - package com.zebra.sdk.printer.discovery
Provides implementation for finding Zebra branded printers.
com.zebra.sdk.settings - package com.zebra.sdk.settings
Provides implementation for applying and retrieving settings from a device.
com.zebra.sdk.zmotif.device - package com.zebra.sdk.zmotif.device
Provides ZMotif card printer objects.
com.zebra.sdk.zmotif.job - package com.zebra.sdk.zmotif.job
Provides container for ZMotif card printer job related functions.
com.zebra.sdk.zmotif.settings - package com.zebra.sdk.zmotif.settings
Provides container for accessing ZMotif card printer settings.
com.zebra.sdk.zxp.job - package com.zebra.sdk.zxp.job
Provides container for ZXP job related functions
com.zebra.sdk.zxp.settings - package com.zebra.sdk.zxp.settings
Provides container for ZXP settings access
Connection - Interface in com.zebra.sdk.comm
A connection to a device.
ConnectionA - Class in com.zebra.sdk.comm
Abstract class which implements the default functionality of Connection.
ConnectionBuilder - Class in com.zebra.sdk.comm
Builds a Connection from a description string.
ConnectionException - Exception in com.zebra.sdk.comm
Signals that an error has occurred on the connection.
ConnectionException(String) - Constructor for exception com.zebra.sdk.comm.ConnectionException
Constructs a ConnectionException with message as the detailed error message.
ConnectionException(Throwable) - Constructor for exception com.zebra.sdk.comm.ConnectionException
Constructs a ConnectionException with cause as the source of the exception.
ConnectionException(String, Throwable) - Constructor for exception com.zebra.sdk.comm.ConnectionException
Constructs a ConnectionException with the message as the detailed error message and cause as the source of the exception.
ConnectionWithWriteLogging - Interface in com.zebra.sdk.comm
A connection to a device that copies data sent to the connection to the provided stream.
CONTACT_ENCODING_TIMEOUT_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Contact: Encoding timeout error
CONTACT_READ_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Contact: Read error
CONTACT_WRITE_VERIFICATION_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Contact: Write verification error
contactEncode - Variable in class com.zebra.sdk.common.card.containers.CardTypeInfo
Returns true if contact tag present.
contactEncoder - Variable in class com.zebra.sdk.common.card.containers.SmartCardInfo
Contact encoder type (internal, external, None).
CONTACTLESS_CHECKSUM_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Contactless: Checksum error
CONTACTLESS_FLASH_READ_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Contactless: Flash read error
CONTACTLESS_FLASH_WRITE_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Contactless: Flash write error
CONTACTLESS_INVALID_REGION_CODE - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Contactless: Invalid region code
CONTACTLESS_NO_READER_INSTALLED - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Contactless: No reader installed
CONTACTLESS_READ_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Contactless: Read error
CONTACTLESS_RF_CONFIG_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Contactless: RF configuration error
CONTACTLESS_UNKNOWN_MODULE_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Contactless: Unknown module error
CONTACTLESS_WRITE_VERIFICATION_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Contactless: Write verification error
contactlessEncode - Variable in class com.zebra.sdk.common.card.containers.CardTypeInfo
Returns true if contactless tag present.
contactlessEncoder - Variable in class com.zebra.sdk.common.card.containers.SmartCardInfo
Contactless encoder type (MIFARE, UHF, Other, None).
contactlessSmartCard - Variable in class com.zebra.sdk.common.card.containers.JobStatusInfo
Contactless encoder status.
contactSmartCard - Variable in class com.zebra.sdk.common.card.containers.JobStatusInfo
Contact encoder status.
contrast - Variable in class com.zebra.sdk.common.card.containers.OCPSettings
Contrast values.
convertDataDocumentToDataMap(String) - Method in interface com.zebra.sdk.common.card.job.template.ZebraTemplate
Converts a JSON- or XML-formatted template data document into a Map.
convertDataDocumentToDataMap(String) - Method in class com.zebra.sdk.common.card.template.ZebraCardTemplate
 
convertImageToRGB(byte[]) - Method in class com.zebra.sdk.common.card.graphics.ZebraCardGraphics
 
convertImageToRGB(byte[]) - Method in interface com.zebra.sdk.common.card.graphics.ZebraGraphicsI
Converts the image to RGB format.
copiesCompleted - Variable in class com.zebra.sdk.common.card.containers.JobStatusInfo
Number of copies completed.
copiesRequested - Variable in class com.zebra.sdk.common.card.containers.JobStatusInfo
Number of copies requested.
country - Variable in class com.zebra.sdk.common.card.containers.WirelessNetworkInfo
Country (read-only).
createImage() - Method in class com.zebra.sdk.common.card.graphics.ZebraCardGraphics
 
createImage(String) - Method in class com.zebra.sdk.common.card.graphics.ZebraCardGraphics
 
createImage(String) - Method in interface com.zebra.sdk.common.card.graphics.ZebraGraphics
Generates the final bitmap image.
createImage() - Method in interface com.zebra.sdk.common.card.graphics.ZebraGraphicsI
Generates the final bitmap image.
createZmotifPrinter(ZebraCardPrinter) - Static method in class com.zebra.sdk.common.card.printer.ZebraCardPrinterFactory
Creates a wrapper around a Zebra printer that provides access to ZebraPrinterZmotif object from ZebraCardPrinter.
createZxpPrinter(ZebraCardPrinter) - Static method in class com.zebra.sdk.common.card.printer.ZebraCardPrinterFactory
Creates a wrapper around a Zebra printer that provides access to ZebraPrinterZxp object from ZebraCardPrinter.
cropImage(byte[], int, int, int, int) - Method in class com.zebra.sdk.common.card.graphics.ZebraCardGraphics
 
cropImage(byte[], int, int, int, int) - Method in interface com.zebra.sdk.common.card.graphics.ZebraGraphicsI
Crops an image to supplied dimensions and returns the cropped image data.
cryptoType - Variable in class com.zebra.sdk.common.card.containers.WirelessNetworkInfo
Wireless cryptographic security type (read-only).
CUSTOM_CARD_1 - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Custom card 1 prefix.
CUSTOM_CARD_2 - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Custom card 2 prefix.
CUSTOM_CARD_COERCIVITY - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Custom card coercivity information.
CUSTOM_CARD_CONTACT_ENCODE - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Custom card contact smart card information.
CUSTOM_CARD_CONTACTLESS_ENCODE - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Custom card contactless smart card information.
CUSTOM_CARD_DESCRIPTION - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Custom card description.
CUSTOM_CARD_LAM_ADJ_BOTTOM_TEMP - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Custom card laminator bottom temperature adjustment.
CUSTOM_CARD_LAM_ADJ_SPEED - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Custom card laminator speed adjustment.
CUSTOM_CARD_LAM_ADJ_TOP_TEMP - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Custom card laminator top temperature adjustment.
CUSTOM_CARD_MAG_STRIPE - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Custom card magnetic stripe information.
CUSTOM_CARD_THICKNESS - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Custom card thickness.
CUSTOM_CARD_TYPE - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Custom card type.
CUSTOM_CARD_XFER_SPEED_INPUT_DOUBLE - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Custom card transfer speed input double sided.
CUSTOM_CARD_XFER_SPEED_INPUT_DOUBLE_UV - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Custom card UV transfer speed input double sided.
CUSTOM_CARD_XFER_SPEED_INPUT_SINGLE - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Custom card transfer speed input single sided.
CUSTOM_CARD_XFER_SPEED_INPUT_SINGLE_UV - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Custom card UV transfer speed input single sided.
CUSTOM_CARD_XFER_SPEED_OUTPUT_DOUBLE - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Custom card transfer speed output double sided.
CUSTOM_CARD_XFER_SPEED_OUTPUT_DOUBLE_UV - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Custom card UV transfer speed output double sided.
CUSTOM_CARD_XFER_SPEED_OUTPUT_SINGLE - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Custom card transfer speed output single sided.
CUSTOM_CARD_XFER_SPEED_OUTPUT_SINGLE_UV - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Custom card UV transfer speed output single sided.
CUSTOM_CARD_XFER_TEMP_BOTTOM_DOUBLE - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Custom card transfer temperature bottom double sided.
CUSTOM_CARD_XFER_TEMP_BOTTOM_SINGLE - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Custom card transfer temperature bottom single sided.
CUSTOM_CARD_XFER_TEMP_TOP_DOUBLE - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Custom card transfer temperature top double sided.
CUSTOM_CARD_XFER_TEMP_TOP_SINGLE - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Custom card transfer temperature top single sided.
CustomCard - Enum in com.zebra.sdk.common.card.enumerations
Specifies the custom card type to use.
CYAN_PANEL_INTENSITY_BACK - Static variable in class com.zebra.sdk.zxp.job.ZebraCardJobSettingNamesZxp
Back Cyan Panel Intensity.
CYAN_PANEL_INTENSITY_FRONT - Static variable in class com.zebra.sdk.zxp.job.ZebraCardJobSettingNamesZxp
Front Cyan Panel Intensity.
CYAN_SPEED_ADJUST - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Cyan print speed adjustment.
CYAN_X_OFFSET - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Cyan print x-offset.

D

DATA_SOURCE - Static variable in class com.zebra.sdk.common.card.jobSettings.ZebraCardJobSettingNames
Data source.
DataCharParity - Enum in com.zebra.sdk.common.card.enumerations
Specifies the data character parity for magnetic encoding.
DataFormat - Enum in com.zebra.sdk.common.card.enumerations
Specifies the data format for magnetic encoding.
dataSource - Variable in class com.zebra.sdk.common.card.containers.JobConfigInfo
DataSource to read ID from.
DataSource - Enum in com.zebra.sdk.common.card.enumerations
Specifies the data source for the specified magnetic read operation.
DEFAULT_CPCL_TCP_PORT - Static variable in class com.zebra.sdk.comm.TcpConnection
The default TCP port for CPCL devices.
DEFAULT_WIRED_ADDRESS - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Default wired IP address.
For ZC Series printers only.
DEFAULT_WIRED_GATEWAY - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Default wired Gateway address.
For ZC Series printers only.
DEFAULT_WIRED_SUBNET - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Default wired Subnet mask.
For ZC Series printers only.
DEFAULT_ZPL_TCP_PORT - Static variable in class com.zebra.sdk.comm.TcpConnection
The default TCP port for ZPL devices.
DELETE_AFTER - Static variable in class com.zebra.sdk.common.card.jobSettings.ZebraCardJobSettingNames
Delete after.
deleteJob - Variable in class com.zebra.sdk.common.card.containers.JobConfigInfo
Indicates whether all image data should be deleted following job completion.
For ZXP Series printers only.
deleteTemplate(String) - Method in interface com.zebra.sdk.common.card.job.template.ZebraTemplate
Deletes the specified template.
deleteTemplate(String) - Method in class com.zebra.sdk.common.card.template.ZebraCardTemplate
 
deleteTemplateImage(String) - Method in interface com.zebra.sdk.common.card.job.template.ZebraTemplate
Deletes the specified template image.
deleteTemplateImage(String) - Method in class com.zebra.sdk.common.card.template.ZebraCardTemplate
 
description - Variable in class com.zebra.sdk.common.card.containers.AlarmInfo
Alarm or error description.
description - Variable in class com.zebra.sdk.common.card.containers.CardTypeInfo
Card description.
description - Variable in class com.zebra.sdk.common.card.containers.MediaInfo
Media description.
destroy() - Method in interface com.zebra.sdk.common.card.job.JobUtil
Clean up all resources and stop any running threads.

ZXP Series 1 and 3: calling destroy() with pending or active jobs will result in all jobs being cancelled.
DeviceUtil - Interface in com.zebra.sdk.common.card.device
Defines functions used for printer-related operations.
DeviceUtilZmotif - Interface in com.zebra.sdk.zmotif.device
Interface to ZMotif printer utility functions.
dhcpEnabled - Variable in class com.zebra.sdk.common.card.containers.NetworkInfo
Returns true if DHCP is enabled.
dhcpEnabled - Variable in class com.zebra.sdk.common.card.containers.WirelessNetworkInfo
Indicates whether DHCP is enabled (read-only).
directedBroadcast(DiscoveryHandler, String) - Static method in class com.zebra.sdk.common.card.printer.discovery.NetworkCardDiscoverer
Sends a directed broadcast discovery packet to the subnet specified by ipAddress.
DiscoveredCardPrinterNetwork - Class in com.zebra.sdk.common.card.printer.discovery
Instance of DiscoveredPrinter that is returned when performing a network discovery for card printers.
DiscoveredCardPrinterNetwork(String, int) - Constructor for class com.zebra.sdk.common.card.printer.discovery.DiscoveredCardPrinterNetwork
Returns an instance of a DiscoveredCardPrinterNetwork with address and port.
DiscoveredCardPrinterNetwork(Map<String, String>) - Constructor for class com.zebra.sdk.common.card.printer.discovery.DiscoveredCardPrinterNetwork
Returns an instance of a DiscoveredCardPrinterNetwork built using the provided attributes.
DiscoveredPrinter - Class in com.zebra.sdk.printer.discovery
Container holding information about a discovered printer.
DiscoveredPrinter(String) - Constructor for class com.zebra.sdk.printer.discovery.DiscoveredPrinter
Creates an object holding information about a discovered printer.
DiscoveredPrinterDriver - Class in com.zebra.sdk.printer.discovery
Instance of DiscoveredPrinter that is returned when performing a Driver Discovery.
DiscoveredPrinterDriver(String, String, String[]) - Constructor for class com.zebra.sdk.printer.discovery.DiscoveredPrinterDriver
Returns an instance of a DiscoveredPrinter with printerName, driverName, and portNames.
DiscoveredPrinterFilter - Interface in com.zebra.sdk.printer.discovery
DiscoveredPrinterFilter is an interface to allow the user to write custom code to determine whether or not a DiscoveredPrinter should be included in the discovery result.
DiscoveredUsbPrinter - Class in com.zebra.sdk.printer.discovery
Instance of DiscoveredPrinter that is returned when performing a search of currently connected Zebra USB printers.
DiscoveredUsbPrinter(String) - Constructor for class com.zebra.sdk.printer.discovery.DiscoveredUsbPrinter
Returns an instance of a DiscoveredUsbPrinter built using the symbolicName returned by UsbDiscoverer.getZebraUsbPrinters()
DiscoveredUsbPrinter(String, Map<String, String>) - Constructor for class com.zebra.sdk.printer.discovery.DiscoveredUsbPrinter
Returns an instance of a DiscoveredUsbPrinter built using the provided symbolicName and attributes.
DiscoveryConfiguration - Class in com.zebra.sdk.common.card.containers
Container holding the network discovery configuration parameters.
DiscoveryConfiguration() - Constructor for class com.zebra.sdk.common.card.containers.DiscoveryConfiguration
Default constructor.
DiscoveryConfiguration(int, int, EnumSet<IPVersion>, EnumSet<PrinterType>) - Constructor for class com.zebra.sdk.common.card.containers.DiscoveryConfiguration
Sets the network discovery configuration parameters.
discoveryError(String) - Method in interface com.zebra.sdk.printer.discovery.DiscoveryHandler
This method is invoked when there is an error during discovery.
DiscoveryException - Exception in com.zebra.sdk.printer.discovery
Signals that there was an error during discovery.
DiscoveryException(String) - Constructor for exception com.zebra.sdk.printer.discovery.DiscoveryException
Constructs a DiscoveryException with message as the detailed error message.
discoveryFinished() - Method in interface com.zebra.sdk.printer.discovery.DiscoveryHandler
This method is invoked when discovery is finished.
DiscoveryHandler - Interface in com.zebra.sdk.printer.discovery
Interface definition for a callback to be invoked for printer discovery events
DiscoveryInfo - Class in com.zebra.sdk.common.card.printer.discovery
Class used for getting and/or setting the network printer discovery parameters.
DiscoveryUtilCard - Class in com.zebra.sdk.common.card.printer.discovery
Defines function used to discover information about a Zebra Card Printer.
DiscoveryUtilCard() - Constructor for class com.zebra.sdk.common.card.printer.discovery.DiscoveryUtilCard
 
dnsName - Variable in class com.zebra.sdk.common.card.containers.NetworkInfo
DNS Name.
Note: Read-only for ZMotif Series 7, 8, and 9 printers.
DONOR_INVALID_RIBBON - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Donor: Invalid ribbon
DONOR_INVALID_RIBBON_MAC - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Donor: Invalid ribbon MAC
DONOR_OUT_OF_RIBBON - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Donor: Out of ribbon
DONOR_RIBBON_ADC_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Donor: Ribbon ADC error
DONOR_RIBBON_BEMF_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Donor: Ribbon BEMF error
DONOR_RIBBON_CALIBRATION_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Donor: Ribbon calibration error
DONOR_RIBBON_COLOR_DETECT_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Donor: Ribbon color detection error
DONOR_RIBBON_JAM - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Donor: Ribbon jam
DONOR_RIBBON_LOW - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Donor: Low ribbon
DONOR_RIBBON_MOTION_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Donor: Ribbon motion error
doQuietZone(boolean) - Method in interface com.zebra.sdk.common.card.graphics.barcode.BarcodeUtil
Controls whether a quiet zone should be included or not.
doubleSize - Variable in class com.zebra.sdk.common.card.containers.OCPLine
Indicates whether the message should be displayed as double height characters.
For ZMotif Series 7, 8, and 9 printers only.
drawBarcode(String, int, int, Rotation) - Method in interface com.zebra.sdk.common.card.graphics.barcode.BarcodeUtil
Draws the selected barcode symbology at the user specified x and y coordinates.
drawEllipse(int, int, int, int, int, Color, Color) - Method in class com.zebra.sdk.common.card.graphics.ZebraCardGraphics
 
drawEllipse(int, int, int, int, int, Color, Color) - Method in interface com.zebra.sdk.common.card.graphics.ZebraGraphics
Draws an ellipse at the specified coordinates
drawImage(byte[], int, int, int, int, RotationType) - Method in class com.zebra.sdk.common.card.graphics.ZebraCardGraphics
 
drawImage(byte[], int, int, int, int, float, RotationType) - Method in class com.zebra.sdk.common.card.graphics.ZebraCardGraphics
 
drawImage(byte[], ImagePosition, int, int, float, RotationType) - Method in class com.zebra.sdk.common.card.graphics.ZebraCardGraphics
 
drawImage(byte[], int, int, int, int, float, RotationType) - Method in interface com.zebra.sdk.common.card.graphics.ZebraGraphics
Draws the image into the specified rectangle.
drawImage(byte[], ImagePosition, int, int, float, RotationType) - Method in interface com.zebra.sdk.common.card.graphics.ZebraGraphics
Draws the image at the specified image position in the rectangle.
drawImage(byte[], int, int, int, int, RotationType) - Method in interface com.zebra.sdk.common.card.graphics.ZebraGraphicsI
Draws the image into the specified rectangle.
drawLine(int, int, int, int, float, Color) - Method in class com.zebra.sdk.common.card.graphics.ZebraCardGraphics
 
drawLine(int, int, int, int, float, Color) - Method in interface com.zebra.sdk.common.card.graphics.ZebraGraphics
Draws a Line from the specified coordinates.
drawRectangle(int, int, int, int, float, Color, Color) - Method in class com.zebra.sdk.common.card.graphics.ZebraCardGraphics
 
drawRectangle(int, int, int, int, float, Color, Color) - Method in interface com.zebra.sdk.common.card.graphics.ZebraGraphics
Draws a rectangle at the specified coordinates
drawRoundedRectangle(int, int, int, int, float, float, Color, Color) - Method in class com.zebra.sdk.common.card.graphics.ZebraCardGraphics
 
drawRoundedRectangle(int, int, int, int, float, float, Color, Color) - Method in interface com.zebra.sdk.common.card.graphics.ZebraGraphics
Draws a round-cornered rectangle at the specified coordinates.
drawText(String, int, int, Color) - Method in class com.zebra.sdk.common.card.graphics.ZebraCardGraphics
 
drawText(String, int, int, int, Color) - Method in class com.zebra.sdk.common.card.graphics.ZebraCardGraphics
 
drawText(String, int, int, int, int, int, Color) - Method in class com.zebra.sdk.common.card.graphics.ZebraCardGraphics
 
drawText(String, int, int, int, int, int, Color, boolean) - Method in class com.zebra.sdk.common.card.graphics.ZebraCardGraphics
 
drawText(String, int, int, int, int, int, TextAlignment, TextAlignment, Color) - Method in class com.zebra.sdk.common.card.graphics.ZebraCardGraphics
 
drawText(String, int, int, int, int, int, TextAlignment, TextAlignment, Color, boolean) - Method in class com.zebra.sdk.common.card.graphics.ZebraCardGraphics
 
drawText(String, int, int, int, Color) - Method in interface com.zebra.sdk.common.card.graphics.ZebraGraphics
Draws the text at the specified x and y coordinates and center rotates the text to the specified angle
drawText(String, int, int, Color) - Method in interface com.zebra.sdk.common.card.graphics.ZebraGraphics
Draws the text at the specified x and y coordinates.
drawText(String, int, int, int, int, int, Color) - Method in interface com.zebra.sdk.common.card.graphics.ZebraGraphics
Draws the text into the specified rectangle.
drawText(String, int, int, int, int, int, Color, boolean) - Method in interface com.zebra.sdk.common.card.graphics.ZebraGraphics
Draws the text into the specified rectangle.
drawText(String, int, int, int, int, int, TextAlignment, TextAlignment, Color) - Method in interface com.zebra.sdk.common.card.graphics.ZebraGraphics
Draws the text into the specified rectangle.
drawText(String, int, int, int, int, int, TextAlignment, TextAlignment, Color, boolean) - Method in interface com.zebra.sdk.common.card.graphics.ZebraGraphics
Draws the text into the specified rectangle.
driverName - Variable in class com.zebra.sdk.printer.discovery.DiscoveredPrinterDriver
Zebra Driver name.

E

ejectCard() - Method in interface com.zebra.sdk.common.card.job.JobUtil
Sends the card to the eject bin.
enableExtendedCharSet(boolean) - Method in interface com.zebra.sdk.common.card.graphics.barcode.Code39Util
Enables or disables the extended character set.
encodingType - Variable in class com.zebra.sdk.common.card.containers.MagConfigInfo
Type of magnetic encoding.
encryptGraphicsData(boolean) - Method in interface com.zebra.sdk.zmotif.job.JobControlHelperUtilZmotif
Indicates whether the job's graphics data should be encrypted using the key provided by JobControlHelperUtilZmotif.setEncryptionKey(byte[]).
Encryption option must be pre-configured on the printer.
encryption - Variable in class com.zebra.sdk.common.card.containers.WirelessAccessPointInfo
Wireless encryption mode.
encryptJobControlData(boolean) - Method in interface com.zebra.sdk.zmotif.job.JobControlHelperUtilZmotif
Indicates whether the job control data should be encrypted using the key provided by JobControlHelperUtilZmotif.setEncryptionKey(byte[]).
Encryption option must be pre-configured on the printer.
end - Variable in class com.zebra.sdk.common.card.containers.MagSentinel
End sentinel character.
END_OF_CARD_OFFSET - Static variable in class com.zebra.sdk.zxp.settings.ZebraCardSettingNamesZxp
End of card offset.
ENGINE_ATM_CARD_JAM - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Engine: ATM card jam
ENGINE_CARD_CLEANING_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Engine: Card cleaning error
ENGINE_CARD_EJECT_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Engine: Card eject error
ENGINE_CARD_FEED_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Engine: Card feed error
ENGINE_CARD_JAM_PRINT_PATH - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Engine: Print path card jam
ENGINE_CARD_REJECT_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Engine: Card reject error
ENGINE_CARD_TRANSFER_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Engine: Card transfer error
ENGINE_CLEANING_DUE_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Engine: Cleaning due error
ENGINE_CLEANING_PRE_WARNING_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Engine: Cleaning pre-warning error
ENGINE_CLEANING_REQUIRED_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Engine: Cleaning required error
ENGINE_DOOR_OPEN - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Engine: Door open
ENGINE_EP_SCRIPT_CONTENT_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Engine: EP script content error
ENGINE_EP_SCRIPT_PROC_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Engine: EP script processing error
ENGINE_EP_SCRIPT_TRANS_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Engine: EP script transmission error
ENGINE_FEEDER_DOOR_OPEN - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Engine: Feeder door open
ENGINE_FLIPPER_CARD_JAM - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Engine: Flipper card jam
ENGINE_FLIPPER_INIT_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Engine: Flipper initialization error
ENGINE_FLIPPER_MOVE_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Engine: Flipper move failure
ENGINE_INIT_FLIPPER_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Engine: Flipper initialization error
ENGINE_INIT_PRINT_PATH_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Engine: Print path initialization error
ENGINE_INVALID_EP_SCRIPT - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Engine: Invalid EP script
ENGINE_MAG_ENCODER_CARD_JAM - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Engine: Magnetic encoder card jam
ENGINE_MAG_RETRACE_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Engine: Mag retrace error
ENGINE_MEDIA_DRAWER_OPEN - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Engine: Media drawer open
ENGINE_MOTOR_VOLTAGE_RANGE_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Engine: Motor voltage range error
ENGINE_OPTIONS_MODULE_CARD_JAM - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Engine: Options module card jam
ENGINE_OPTIONS_MODULE_INIT_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Engine: Options module initialization error
ENGINE_PRINT_ENTRANCE_CARD_JAM - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Engine: Print entrance card jam
ENGINE_PRINT_EXIT_CARD_JAM - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Engine: Print exit card jam
ENGINE_PRINT_PATH_CARD_JAM - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Engine: Print path card jam
ENGINE_PRINT_PATH_INIT_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Engine: Print path initialization error
ENGINE_PRINT_SYNCH_CARD_JAM - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Engine: Print synchroniztion card jam
ENGINE_PRINTHEAD_CABLE_DISCONNECTED - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Engine: Printhead cable disconnected
ENGINE_PRINTHEAD_CAM_HOME_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Engine: Printhead CAM home error
ENGINE_PRINTHEAD_INIT_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Engine: Printhead initialization error
ENGINE_PRINTHEAD_TEMP_TOO_HIGH - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Engine: Printhead temperature too high
ENGINE_PRINTHEAD_TEMP_TOO_LOW - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Engine: Printhead temperature too low
ENGINE_PROTOCOL_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Engine: Protocol error
ENGINE_PUSHER_PLATE_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Engine: Pusher plate error
ENGINE_REJECT_BIN_FULL - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Engine: Reject bin full
ENGINE_SMARTCARD_CAM_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Engine: Smartcard CAM error
ENGINE_SMARTCARD_INIT_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Engine: Smartcard initialization error
ENGINE_SMARTCARD_POS_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Engine: Smartcard positioning error
ENGINE_TRANSFER_ROLLERS_TEMP_TOO_HIGH - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Engine: Transfer rollers temperature too high
ENGINE_TRANSFER_ROLLERS_TEMP_TOO_LOW - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Engine: transfer rollers temperature too low
equals(Object) - Method in class com.zebra.sdk.printer.discovery.DiscoveredPrinter
Returns true if two discovered printer objects have the same address, otherwise it returns false.
ERROR_CONTROL_LEVEL - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Error control level.
ErrorControlLevel - Enum in com.zebra.sdk.common.card.enumerations
Specifies the printer's error control level.
ErrorCorrectionLevel - Enum in com.zebra.sdk.common.card.graphics.barcode.enumerations
Enumeration for the four QR code error correction levels.
errorInfo - Variable in class com.zebra.sdk.common.card.containers.JobStatusInfo
Current printer error information.
errorInfo - Variable in class com.zebra.sdk.common.card.containers.PrinterStatusInfo
Current printer error information.
ETHERNET_OPEN_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Ethernet: Open failed
EXTERNAL_ENCODER_CONTACT_ENCODING - Static variable in class com.zebra.sdk.zxp.settings.ZebraCardSettingNamesZxp
External contact smart card encoder.
extractBlackImageData(byte[], int, int, int) - Method in class com.zebra.sdk.common.card.graphics.ZebraCardGraphics
 
extractBlackImageData(byte[], int, int, int) - Method in interface com.zebra.sdk.common.card.graphics.ZebraGraphicsI
Separates the monochrome and color data from the specified image data using the specified threshold values.
ExtractedImages - Class in com.zebra.sdk.common.card.graphics.containers
Container class used for the raw image data returned from ZebraGraphicsI.extractBlackImageData(byte[], int, int, int).
ExtractedImages() - Constructor for class com.zebra.sdk.common.card.graphics.containers.ExtractedImages
 
extractHalfPanelImageData(byte[]) - Method in class com.zebra.sdk.common.card.graphics.ZebraCardGraphics
 
extractHalfPanelImageData(byte[]) - Method in interface com.zebra.sdk.common.card.graphics.ZebraGraphicsI
Attempts to identify and extract the color and non-color half panel regions of the source image.

F

feederVersion - Variable in class com.zebra.sdk.common.card.containers.PrinterInfo
Feeder control board firmware version.
For ZTC Series printers only.
fillColor - Variable in class com.zebra.sdk.common.card.containers.GraphicsInfo
Background fill color.
FillType - Enum in com.zebra.sdk.common.card.enumerations
Specifies the full coverage print type for Overlay 'O' and Laminate 'L' ribbon panels.

For ZC Series printers only. Used with PrintType.Overlay and GraphicsInfo.fillColor.
FILM_DESCRIPTION - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Film description.
FILM_END_ROLL_TRANSFER_OFFSET - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Film end roll transfer offset.
FILM_EXTRA_TRANSFER_TAKEUP_MOVE - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Film extra transfer takeup move.
FILM_INITIAL_SIZE - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Film initial size.
FILM_OEM - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Film OEM code.
FILM_PANELS_REMAINING - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Film panels remaining.
FILM_PRINT_X_OFFSET - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Film print x-offset.
FILM_PRINT_Y_OFFSET - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Film print y-offset.
FILM_TRANSFER_START_OFFSET - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Film transfer start offset.
FILM_TYPE - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Film type.
findPrinters(DiscoveryHandler) - Static method in class com.zebra.sdk.common.card.printer.discovery.NetworkCardDiscoverer
This method will search the network using a combination of discovery methods to find printers on the network.
findPrinters(DiscoveryHandler, List<String>) - Static method in class com.zebra.sdk.common.card.printer.discovery.NetworkCardDiscoverer
Sends a discovery request to the list of printer DNS names or IP addresses in printersToFind.
firmwareVersion - Variable in class com.zebra.sdk.common.card.containers.LaminatorInfo
Firmware version.
firmwareVersion - Variable in class com.zebra.sdk.common.card.containers.PrinterInfo
Main control board firmware version.
flash - Variable in class com.zebra.sdk.common.card.containers.MemoryInfo
Flash available.
FLIPPER_SENSOR_OFFSET - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Flipper sensor offset.
flipperVersion - Variable in class com.zebra.sdk.common.card.containers.PrinterInfo
Flipper control board firmware version.
For ZTC Series printers only.
FLUX_CORRECTION - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Flux correction.
format - Variable in class com.zebra.sdk.common.card.containers.MagSentinel
Sentinel data format.
foundPrinter(DiscoveredPrinter) - Method in interface com.zebra.sdk.printer.discovery.DiscoveryHandler
This method is invoked when a printer has been discovered.
fromChar(char) - Static method in enum com.zebra.sdk.common.card.graphics.barcode.enumerations.ErrorCorrectionLevel
Returns the associated error correction level from the specified character value.
fromInteger(int) - Static method in enum com.zebra.sdk.common.card.enumerations.ATMMode
Returns the ATMMode associated with the specified integer value.
fromInteger(int) - Static method in enum com.zebra.sdk.common.card.enumerations.CalibrationTable
Returns the CalibrationTable associated with the specified integer value.
fromInteger(int) - Static method in enum com.zebra.sdk.common.card.enumerations.FillType
Returns the associated FillType from the specified integer value.
fromInteger(int) - Static method in enum com.zebra.sdk.common.card.enumerations.ImageRotation
Returns the associated RotationType from the specified integer value.
fromInteger(int) - Static method in enum com.zebra.sdk.common.card.enumerations.PrintOptimizationMode
Returns the PrintOptimizationMode associated with the specified integer value.
fromInteger(int) - Static method in enum com.zebra.sdk.common.card.graphics.barcode.enumerations.Rotation
Returns the associated Rotation from the specified integer value.
fromString(String) - Static method in enum com.zebra.sdk.common.card.enumerations.CardDestination
Returns the CardDestination for the specified text.
fromString(String) - Static method in enum com.zebra.sdk.common.card.enumerations.CardSide
Returns the CardSide for the specified text or null if no enumeration matches the specified text.
fromString(String) - Static method in enum com.zebra.sdk.common.card.enumerations.CardSource
Returns the CardSource for the specified text or null if no enumeration matches the specified text.
fromString(String) - Static method in enum com.zebra.sdk.common.card.enumerations.CoercivityType
Returns the CoercivityType for the specified text or null if no enumeration matches the specified text.
fromString(String) - Static method in enum com.zebra.sdk.common.card.enumerations.DataFormat
Returns the DataFormat for the specified text or null if no enumeration matches the specified text.
fromString(String) - Static method in enum com.zebra.sdk.common.card.enumerations.DataSource
Returns the DataSource for the specified text or null if no enumeration matches the specified text.
fromString(String) - Static method in enum com.zebra.sdk.common.card.enumerations.ErrorControlLevel
Returns the ErrorControlLevel for the specified text or null if no enumeration matches the specified text.
fromString(String) - Static method in enum com.zebra.sdk.common.card.enumerations.KOptimizationType
Returns the associated KOptimizationType for the specified text or null if no enumeration matches the specified text.
fromString(String) - Static method in enum com.zebra.sdk.common.card.enumerations.MagEncoderType
Returns the MagEncoderType for the specified text or null if no enumeration matches the specified text.
fromString(String) - Static method in enum com.zebra.sdk.common.card.enumerations.MagEncodingType
Returns the MagEncodingType for the specified text or null if no enumeration matches the specified text.
fromString(String) - Static method in enum com.zebra.sdk.common.card.enumerations.MediaType
Returns the MediaType for the specified text or null if no enumeration matches the specified text.
fromString(String) - Static method in enum com.zebra.sdk.common.card.enumerations.OCPLanguage
Returns the OCPLanguage for the specified text or null if no enumeration matches the specified text.
fromString(String) - Static method in enum com.zebra.sdk.common.card.enumerations.OrientationType
Returns the OrientationType for the specified text or null if no enumeration matches the specified text.
fromString(String) - Static method in enum com.zebra.sdk.common.card.enumerations.PrintOptimizationMode
Returns the PrintOptimizationMode for the specified text or null if no enumeration matches the specified text.
fromString(String) - Static method in enum com.zebra.sdk.common.card.enumerations.SharpeningLevel
Returns the SharpeningLevel for the specified text or null if no enumeration matches the specified text.
fromString(String) - Static method in enum com.zebra.sdk.common.card.enumerations.Timeout
Returns the Timeout for the specified text or null if no enumeration matches the specified text.
fromString(String) - Static method in enum com.zebra.sdk.common.card.enumerations.TransferType
Returns the TransferType for the specified text or null if no enumeration matches the specified text.
fromString(String) - Static method in enum com.zebra.sdk.common.card.graphics.enumerations.RotationType
Returns the RotationType for the specified text.

G

gateway - Variable in class com.zebra.sdk.common.card.containers.NetworkInfo
Gateway.
gateway - Variable in class com.zebra.sdk.common.card.containers.WirelessNetworkInfo
Gateway (read-only).
generateTemplateDataJob(String, Map<String, String>) - Method in interface com.zebra.sdk.common.card.job.template.ZebraTemplate
Returns an instance of TemplateJob containing the job-specific data.
generateTemplateDataJob(String, Map<String, String>) - Method in class com.zebra.sdk.common.card.template.ZebraCardTemplate
 
generateTemplateJob(String, Map<String, String>) - Method in interface com.zebra.sdk.common.card.job.template.ZebraTemplate
Returns an instance of TemplateJob containing the job-specific data.
generateTemplateJob(String, Map<String, String>) - Method in class com.zebra.sdk.common.card.template.ZebraCardTemplate
 
getAccess() - Method in class com.zebra.sdk.settings.Setting
Returns a string that describes the access permissions for the setting.
getActiveLUTTable() - Method in interface com.zebra.sdk.zmotif.settings.SettingsHelperUtilZmotif
Gets the printer's Active LUT Table.
For ZMotif Series 7, 8, and 9 printers only.
getAddress() - Method in interface com.zebra.sdk.comm.IpAddressable
Returns the address which was passed into the constructor.
getAddress() - Method in class com.zebra.sdk.comm.TcpConnection
 
getAllJobSettings() - Method in interface com.zebra.sdk.common.card.job.JobControlProvider
Retrieve all settings and their attributes.
getAllJobSettingValues() - Method in interface com.zebra.sdk.common.card.job.JobControlProvider
Retrieves all of the printer's setting values.
getAllSettings() - Method in interface com.zebra.sdk.settings.SettingsProvider
Retrieve all settings and their attributes.
getAllSettingValues() - Method in interface com.zebra.sdk.settings.SettingsProvider
Retrieves all of the device's setting values.
getAllTemplateImageNames() - Method in interface com.zebra.sdk.common.card.job.template.ZebraTemplate
Gets a List of all stored template images.
getAllTemplateImageNames() - Method in class com.zebra.sdk.common.card.template.ZebraCardTemplate
 
getAllTemplateNames() - Method in interface com.zebra.sdk.common.card.job.template.ZebraTemplate
Returns a List containing the stored template names.
getAllTemplateNames() - Method in class com.zebra.sdk.common.card.template.ZebraCardTemplate
 
getArchive() - Method in class com.zebra.sdk.settings.Setting
Return true if this setting can be applied when loading a backup.
getATMMode() - Method in interface com.zebra.sdk.zxp.settings.SettingsHelperUtilZxp
Returns the ATM card feed mode.
getAvailableCardTypes() - Method in interface com.zebra.sdk.zmotif.device.DeviceUtilZmotif
Queries the printer and returns the available card types.
getAvailableMemory() - Method in interface com.zebra.sdk.zmotif.device.DeviceUtilZmotif
Queries the printer and returns the memory available for job storage.
getAvailableSettings() - Method in interface com.zebra.sdk.settings.SettingsProvider
Retrieve all of the setting identifiers for a device.
getBarHeight() - Method in interface com.zebra.sdk.common.card.graphics.barcode.BarcodeUtil
Returns the height of the bars.
getBarHeight(LogicalHeight) - Method in interface com.zebra.sdk.common.card.graphics.barcode.CodePostnetUtil
Returns the effective height of a bar with a given logical height.
getBarWidth(int) - Method in interface com.zebra.sdk.common.card.graphics.barcode.BarcodeUtil
Returns the effective width of a bar with a given logical width.
getBaselinePosition() - Method in interface com.zebra.sdk.common.card.graphics.barcode.CodePostnetUtil
Returns the baseline position that indicates whether the bars are top-align or bottom-aligned.
getCalibrationTableData(CalibrationTable) - Method in interface com.zebra.sdk.zmotif.settings.SettingsHelperUtilZmotif
Gets the printer's specified calibration table data.
For ZMotif Series 7, 8, and 9 printers only.
getCalibrationTableNames() - Method in interface com.zebra.sdk.zmotif.settings.SettingsHelperUtilZmotif
Gets the list of all the stored calibration tables from the printer.
For ZMotif Series 7, 8, and 9 printers only.
getCapabilities(CapabilitiesType) - Method in interface com.zebra.sdk.zmotif.settings.SettingsHelperUtilZmotif
Gets the printer's specified capabilities in an XML format.
getCardCount() - Method in interface com.zebra.sdk.common.card.device.DeviceUtil
Returns the printer's total card count values.
getCardDestination() - Method in interface com.zebra.sdk.zmotif.job.JobControlHelperUtilZmotif
Returns the current card destination location.
getCardDestination() - Method in interface com.zebra.sdk.zxp.job.JobControlHelperUtilZxp
Returns the destination of the card following job completion.
getCardSource() - Method in interface com.zebra.sdk.zmotif.job.JobControlHelperUtilZmotif
Returns the current card source location.
getCardSource() - Method in interface com.zebra.sdk.zxp.job.JobControlHelperUtilZxp
Returns the card source location.
getCardThickness() - Method in interface com.zebra.sdk.zmotif.job.JobControlHelperUtilZmotif
Returns the card thickness in mil.
getCardType() - Method in interface com.zebra.sdk.zmotif.job.JobControlHelperUtilZmotif
Returns the currently selected card type.
getCardTypeInformation(String) - Method in interface com.zebra.sdk.zmotif.device.DeviceUtilZmotif
Queries the printer and returns the card type information for specified card type.
getCharacterSet() - Method in interface com.zebra.sdk.common.card.graphics.barcode.Code128Util
Returns the codeset to be used.
getCheckDigitMarker() - Method in interface com.zebra.sdk.common.card.graphics.barcode.CodeEAN128Util
Returns the character used as the check digit marker.
getChecksumMode() - Method in interface com.zebra.sdk.common.card.graphics.barcode.Code39Util
Returns the current checksum mode.
getChecksumMode() - Method in interface com.zebra.sdk.common.card.graphics.barcode.CodeCodabarUtil
Returns the current checksum mode.
getChecksumMode() - Method in interface com.zebra.sdk.common.card.graphics.barcode.CodeEANUtil
Returns the current checksum mode.
getChecksumMode() - Method in interface com.zebra.sdk.common.card.graphics.barcode.CodeInterleaved2Of5Util
Returns the current checksum mode.
getChecksumMode() - Method in interface com.zebra.sdk.common.card.graphics.barcode.CodePostnetUtil
Returns the current checksum mode.
getCleaningInterval(CleaningPath) - Method in interface com.zebra.sdk.zmotif.settings.SettingsHelperUtilZmotif
Get specified cleaning path ParameterInfo object.
getCleanWarningThreshold() - Method in interface com.zebra.sdk.zmotif.settings.SettingsHelperUtilZmotif
Gets the printer's cleaning warning threshold.
getClone() - Method in class com.zebra.sdk.settings.Setting
Returns true if this setting can be applied when loading a profile.
getCode128(ZebraGraphics) - Static method in class com.zebra.sdk.common.card.graphics.barcode.ZebraBarcodeFactory
Returns the barcode utilites class for Code 128 barcodes.
getCode39(ZebraGraphics) - Static method in class com.zebra.sdk.common.card.graphics.barcode.ZebraBarcodeFactory
Returns the barcode utilites class for Code 39 barcodes.
getCodeCodabar(ZebraGraphics) - Static method in class com.zebra.sdk.common.card.graphics.barcode.ZebraBarcodeFactory
Returns the barcode utilites class for Codabar barcodes.
getCodeDataMatrix(ZebraGraphics) - Static method in class com.zebra.sdk.common.card.graphics.barcode.ZebraBarcodeFactory
Returns the barcode utilites class for Data Matrix barcodes.
getCodeEAN128(ZebraGraphics) - Static method in class com.zebra.sdk.common.card.graphics.barcode.ZebraBarcodeFactory
Returns the barcode utilites class for EAN128 barcodes.
getCodeEAN13(ZebraGraphics) - Static method in class com.zebra.sdk.common.card.graphics.barcode.ZebraBarcodeFactory
Returns the barcode utilites class for EAN13 barcodes.
getCodeEAN8(ZebraGraphics) - Static method in class com.zebra.sdk.common.card.graphics.barcode.ZebraBarcodeFactory
Returns the barcode utilites class for EAN8 barcodes.
getCodeInterleaved2Of5(ZebraGraphics) - Static method in class com.zebra.sdk.common.card.graphics.barcode.ZebraBarcodeFactory
Returns the barcode utilites class for Interleaved 2Of5 barcodes.
getCodePDF417(ZebraGraphics) - Static method in class com.zebra.sdk.common.card.graphics.barcode.ZebraBarcodeFactory
Returns the barcode utilites class for PDF417 barcodes.
getCodePostnet(ZebraGraphics) - Static method in class com.zebra.sdk.common.card.graphics.barcode.ZebraBarcodeFactory
Returns the barcode utilites class for Postnet barcodes.
getCodeUPCA(ZebraGraphics) - Static method in class com.zebra.sdk.common.card.graphics.barcode.ZebraBarcodeFactory
Returns the barcode utilites class for UPCA barcodes.
getCodeUPCE(ZebraGraphics) - Static method in class com.zebra.sdk.common.card.graphics.barcode.ZebraBarcodeFactory
Returns the barcode utilites class for UPCE barcodes.
getColorPreheatLevel() - Method in interface com.zebra.sdk.zmotif.job.JobControlHelperUtilZmotif
Returns the preheat level for the color panels.
getColumns() - Method in interface com.zebra.sdk.common.card.graphics.barcode.CodePDF417Util
Gets the number of data columns for the barcode.
getConfiguration() - Method in interface com.zebra.sdk.zmotif.settings.SettingsHelperUtilZmotif
Gets the XML configuration.
getConnection() - Method in class com.zebra.sdk.common.card.printer.discovery.DiscoveredCardPrinterNetwork
 
getConnection() - Method in interface com.zebra.sdk.common.card.printer.ZebraCardPrinter
Returns the printer connection.
getConnection() - Method in class com.zebra.sdk.printer.discovery.DiscoveredPrinter
Creates a connection based on the information in the DiscoveredPrinter response.
getConnection() - Method in class com.zebra.sdk.printer.discovery.DiscoveredPrinterDriver
 
getConnection() - Method in class com.zebra.sdk.printer.discovery.DiscoveredUsbPrinter
 
getConnectionReestablisher(long) - Method in interface com.zebra.sdk.comm.Connection
Returns a ConnectionReestablisher which allows for easy recreation of a connection which may have been closed.
getConnectionReestablisher(long) - Method in class com.zebra.sdk.comm.ConnectionA
 
getConnectionReestablisher(long) - Method in class com.zebra.sdk.comm.TcpConnection
 
getConnectionReestablisher(long) - Method in class com.zebra.sdk.comm.UsbConnection
 
getContactlessSmartCardOffset(String) - Method in interface com.zebra.sdk.zmotif.settings.SettingsHelperUtilZmotif
Returns the offset value for the specified contactless smart card encoder type.
getCustomCardConfiguration(CustomCard) - Method in interface com.zebra.sdk.zmotif.settings.SettingsHelperUtilZmotif
Gets the specified card type information.
getDataSource() - Method in interface com.zebra.sdk.zmotif.job.JobControlHelperUtilZmotif
Returns the selected data source(s) to be used during a read job.
getDataSource() - Method in interface com.zebra.sdk.zxp.job.JobControlHelperUtilZxp
Returns the data source for all magnetic read operations.
getDiscoveryDataMap(Connection) - Static method in class com.zebra.sdk.common.card.printer.discovery.DiscoveryUtilCard
Reads the discovery packet from the provided connection.
getDiscoveryDataMap() - Method in class com.zebra.sdk.printer.discovery.DiscoveredPrinter
This method will return a Map of all settings obtained via the chosen discovery method.
getDisplayChecksum() - Method in interface com.zebra.sdk.common.card.graphics.barcode.Code39Util
Indicates whether the checksum will be displayed as part of the human-readable message.
getDisplayChecksum() - Method in interface com.zebra.sdk.common.card.graphics.barcode.CodeInterleaved2Of5Util
Indicates whether the checksum will be displayed as part of the human-readable message.
getDisplayChecksum() - Method in interface com.zebra.sdk.common.card.graphics.barcode.CodePostnetUtil
Indicates whether the checksum will be displayed as part of the human-readable message.
getDisplayStartStopChars() - Method in interface com.zebra.sdk.common.card.graphics.barcode.Code39Util
Indicates whether the start and stop character will be displayed as part of the human-readable message.
getDisplayStartStopChars() - Method in interface com.zebra.sdk.common.card.graphics.barcode.CodeCodabarUtil
Indicates whether the start and stop character will be displayed as part of the human-readable message.
getECIEnabled() - Method in interface com.zebra.sdk.common.card.graphics.barcode.CodePDF417Util
Indicates whether the generation of ECI sequences is enabled.
getEncoding() - Method in interface com.zebra.sdk.common.card.graphics.barcode.CodePDF417Util
Returns the message encoding.
getEncoding() - Method in interface com.zebra.sdk.common.card.graphics.barcode.CodeQRUtil
Returns the message encoding.
getEndCardOffset() - Method in interface com.zebra.sdk.zxp.settings.SettingsHelperUtilZxp
Returns the printer's end of print value.
getErrorCode() - Method in exception com.zebra.sdk.common.card.exceptions.ZebraCardException
Returns the error code associated with the exception.
getErrorControlLevel() - Method in interface com.zebra.sdk.zmotif.settings.SettingsHelperUtilZmotif
Gets the error control level.
getErrorCorrectionLevel() - Method in interface com.zebra.sdk.common.card.graphics.barcode.CodePDF417Util
Gets the error correction level for the barcode.
getErrorCorrectionLevel() - Method in interface com.zebra.sdk.common.card.graphics.barcode.CodeQRUtil
Returns the selected error correction level.
getFont() - Method in interface com.zebra.sdk.common.card.graphics.barcode.BarcodeUtil
Returns the font of the human-readable portion.
getGraphics2D() - Method in class com.zebra.sdk.common.card.graphics.ZebraCardGraphics
Returns the awt Graphics2D class
getGroupSeparator() - Method in interface com.zebra.sdk.common.card.graphics.barcode.CodeEAN128Util
Gets the group separator character.
getHeadResistance() - Method in interface com.zebra.sdk.zmotif.settings.SettingsHelperUtilZmotif
Returns the ParameterInfo object.
getHeadResistance() - Method in interface com.zebra.sdk.zxp.settings.SettingsHelperUtilZxp
Returns the print head resistance value and valid range.
getHeight() - Method in interface com.zebra.sdk.common.card.graphics.barcode.BarcodeUtil
Returns the full height of the barcode.
getImageData() - Method in class com.zebra.sdk.common.card.graphics.ZebraCardImage
Returns the raw bitmap image data.
getImageData() - Method in interface com.zebra.sdk.common.card.graphics.ZebraCardImageI
Returns the bitmap formatted image data.
getImageOrientation(CardSide) - Method in interface com.zebra.sdk.zmotif.job.JobControlHelperUtilZmotif
Returns the selected image orientation for the specified card side.
getImageRotation(CardSide) - Method in interface com.zebra.sdk.zmotif.job.JobControlHelperUtilZmotif
Returns the image rotation data for the specified card side.
getImageSharpening(CardSide) - Method in interface com.zebra.sdk.zmotif.job.JobControlHelperUtilZmotif
Returns the image sharpening level to be used on the specified card side.
getImageTransferType() - Method in interface com.zebra.sdk.zmotif.settings.SettingsHelperUtilZmotif
Gets the printer's image transfer type.
getInstance(Connection) - Static method in class com.zebra.sdk.common.card.printer.ZebraCardPrinterFactory
Factory method to create the correct ZebraCardPrinter concrete class based on the printer's type.
getIntercharacterGapWidth() - Method in interface com.zebra.sdk.common.card.graphics.barcode.Code39Util
Returns the width between encoded characters.
getIntercharGapWidth() - Method in interface com.zebra.sdk.common.card.graphics.barcode.CodePostnetUtil
Returns the width between encoded characters.
getJobList() - Method in interface com.zebra.sdk.common.card.job.JobUtil
Returns a list of all the current jobs in the printer's queue.
getJobSettingRange(String) - Method in interface com.zebra.sdk.common.card.job.JobControlProvider
Retrieves the allowable range for a setting.
getJobSettings() - Method in interface com.zebra.sdk.common.card.job.JobControlProvider
Retrieve all of the setting identifiers for a printer.
getJobSettingsValues(List<String>) - Method in interface com.zebra.sdk.common.card.job.JobControlProvider
Retrieves the printer's setting values for a list of setting IDs.
getJobSettingType(String) - Method in interface com.zebra.sdk.common.card.job.JobControlProvider
Returns the data type of the setting.
getJobSettingValue(String) - Method in interface com.zebra.sdk.common.card.job.JobControlProvider
Retrieves the printer's setting value for a specific setting ID.
getJobStatus(int) - Method in interface com.zebra.sdk.common.card.job.JobUtil
Returns the job status for the specified jobId.
getKPanelOptimization(CardSide) - Method in interface com.zebra.sdk.zmotif.job.JobControlHelperUtilZmotif
Returns the selected monochrome panel optimization type for the specified card side.
getKPreheatLevel(CardSide) - Method in interface com.zebra.sdk.zmotif.job.JobControlHelperUtilZmotif
Returns the current monochrome preheat level.
getLaminatorCardCount() - Method in interface com.zebra.sdk.zmotif.device.LaminatorUtilZmotif
Queries the printer and returns the laminator card count.
getLaminatorInformation() - Method in interface com.zebra.sdk.zmotif.device.LaminatorUtilZmotif
Queries the printer and returns laminator information.
getLaminatorOdometerValues() - Method in interface com.zebra.sdk.zmotif.device.LaminatorUtilZmotif
Returns the odometer names and values.
getLaminatorOffset(LaminatorOffsetType) - Method in interface com.zebra.sdk.zmotif.settings.SettingsHelperUtilZmotif
Gets the printer's laminator offset value and range.
getLaminatorSensorStates() - Method in interface com.zebra.sdk.zmotif.device.LaminatorUtilZmotif
Queries the printer and returns a Map of laminator sensors and their states.
getLaminatorSensorValues() - Method in interface com.zebra.sdk.zmotif.device.LaminatorUtilZmotif
Returns a Map of laminator sensors and their values.
getLaminatorStatus() - Method in interface com.zebra.sdk.zmotif.device.LaminatorUtilZmotif
Queries the printer and returns the laminator status.
getLog(LogType, boolean) - Method in interface com.zebra.sdk.zmotif.device.DeviceUtilZmotif
Queries the printer and returns the specified log.
getMagBitsPerCharacter() - Method in interface com.zebra.sdk.zmotif.job.JobControlHelperUtilZmotif
Gets the bits per character for each track number.
getMagCoercivity() - Method in interface com.zebra.sdk.zmotif.job.JobControlHelperUtilZmotif
Returns the current coercivity type for magnetic encoding.
getMagCoercivity() - Method in interface com.zebra.sdk.zxp.job.JobControlHelperUtilZxp
Returns the coercivity type for magnetic encoding.
getMagDataFormat() - Method in interface com.zebra.sdk.zmotif.job.JobControlHelperUtilZmotif
Returns the magnetic encoding data format for each track.
getMagDataParity() - Method in interface com.zebra.sdk.zmotif.job.JobControlHelperUtilZmotif
Gets the data parity for each track.
getMagEncodeSide() - Method in interface com.zebra.sdk.zmotif.job.JobControlHelperUtilZmotif
Returns the card side that will be magnetic encoded.
getMagEncodingType() - Method in interface com.zebra.sdk.zmotif.job.JobControlHelperUtilZmotif
Returns the current type of magnetic encoding to perform.
getMagEncodingType() - Method in interface com.zebra.sdk.zxp.job.JobControlHelperUtilZxp
Returns the type of magnetic encoding the will be performed.
getMagneticEncoderConfiguration() - Method in interface com.zebra.sdk.common.card.device.DeviceUtil
Returns the printer's magnetic encoder configuration.
getMagneticEncoderOffsets() - Method in interface com.zebra.sdk.zmotif.settings.SettingsHelperUtilZmotif
Gets the MagneticEncoderOffsetInfo object.
getMagneticEncoderOffsets() - Method in interface com.zebra.sdk.zxp.settings.SettingsHelperUtilZxp
Returns the magnetic encoder offset values.
getMagSentinelFormat() - Method in interface com.zebra.sdk.zmotif.job.JobControlHelperUtilZmotif
Gets the sentinel format values for each track.
getMagTrackDensity() - Method in interface com.zebra.sdk.zmotif.job.JobControlHelperUtilZmotif
Gets the density value for each track.
getManufacturer() - Method in class com.zebra.sdk.comm.ConnectionA
Returns the printer's manufacturer.
getManufacturer() - Method in class com.zebra.sdk.comm.UsbConnection
 
getMaxDataToWrite() - Method in class com.zebra.sdk.comm.ConnectionA
Gets the maximum number of bytes to write at one time
getMaximumColumns() - Method in interface com.zebra.sdk.common.card.graphics.barcode.CodePDF417Util
Gets the maximum number of columns.
getMaximumRows() - Method in interface com.zebra.sdk.common.card.graphics.barcode.CodePDF417Util
Gets the maximum number of rows.
getMaximumSize() - Method in interface com.zebra.sdk.common.card.graphics.barcode.CodeDataMatrixUtil
Returns the maximum symbol size that is to be produced.
getMaximumSize() - Method in interface com.zebra.sdk.common.card.graphics.barcode.CodeQRUtil
Returns the maximum symbol size that is to be produced.
getMaxTimeoutForRead() - Method in interface com.zebra.sdk.comm.Connection
Returns the maximum time, in milliseconds, to wait for any data to be received.
getMaxTimeoutForRead() - Method in class com.zebra.sdk.comm.ConnectionA
 
getMaxTimeoutForRead() - Method in class com.zebra.sdk.comm.UsbConnection
 
getMediaInformation() - Method in interface com.zebra.sdk.common.card.device.DeviceUtil
Returns a list of the printer's installed media information.
getMinimumColumns() - Method in interface com.zebra.sdk.common.card.graphics.barcode.CodePDF417Util
Gets the minimum number of columns.
getMinimumRows() - Method in interface com.zebra.sdk.common.card.graphics.barcode.CodePDF417Util
Gets the minimum number of rows.
getMinimumSize() - Method in interface com.zebra.sdk.common.card.graphics.barcode.CodeDataMatrixUtil
Returns the minimum symbol size that is to be produced.
getMinimumSize() - Method in interface com.zebra.sdk.common.card.graphics.barcode.CodeQRUtil
Returns the minimum symbol size that is to be produced.
getModuleWidth() - Method in interface com.zebra.sdk.common.card.graphics.barcode.BarcodeUtil
Returns the width of the narrow module.
getMonochromeBias() - Method in interface com.zebra.sdk.zxp.settings.SettingsHelperUtilZxp
Returns the monochrome bias value.
getMonochromeConversion(CardSide) - Method in interface com.zebra.sdk.zxp.job.JobControlHelperUtilZxp
Returns the type of monochrome conversion to be performed for the designated card side.
getNetworkParameters() - Method in interface com.zebra.sdk.zmotif.settings.SettingsHelperUtilZmotif
Gets the NetworkInfo object.
getNetworkParameters() - Method in interface com.zebra.sdk.zxp.settings.SettingsHelperUtilZxp
Returns a printer's current network parameters.
getOCPDisplay() - Method in interface com.zebra.sdk.common.card.device.DeviceUtil
Returns the line data currently displayed on the printer's OCP.
For ZXP Series 1 and 3 and ZMotif Series 7, 8, and 9 printers only.
getOCPParameters() - Method in interface com.zebra.sdk.zmotif.settings.SettingsHelperUtilZmotif
Gets the printer's OCP configuration.
For ZMotif Series 7, 8, and 9 printers only.
getOmitBrackets() - Method in interface com.zebra.sdk.common.card.graphics.barcode.CodeEAN128Util
Gets whether brackets will be used in the human-readable part around the AIs.
getPanelPowerLevel(PanelType) - Method in interface com.zebra.sdk.zmotif.settings.SettingsHelperUtilZmotif
Gets the specified panel power level.
getParameters() - Static method in class com.zebra.sdk.common.card.printer.discovery.NetworkDiscoveryConfiguration
Returns the current network discovery configuration parameters.
getPattern() - Method in interface com.zebra.sdk.common.card.graphics.barcode.BarcodeUtil
Returns the pattern to be applied over the human readable message.
getPortNumber() - Method in interface com.zebra.sdk.comm.IpAddressable
Returns the port number which was passed into the constructor.
getPortNumber() - Method in class com.zebra.sdk.comm.TcpConnection
 
getPrintCapability() - Method in interface com.zebra.sdk.common.card.device.DeviceUtil
Returns the transfer type of the printer.
getPrinterInformation() - Method in interface com.zebra.sdk.common.card.device.DeviceUtil
Returns the printer's specific device information.
getPrinterModel() - Method in class com.zebra.sdk.common.card.graphics.ZebraCardGraphics
Returns the printer model.
getPrinterStatus() - Method in interface com.zebra.sdk.common.card.device.DeviceUtil
Returns the printer's current status information.
getPrintOptimizationMode() - Method in interface com.zebra.sdk.zmotif.job.JobControlHelperUtilZmotif
Gets the print optimization mode.
getPrintOptimizationMode() - Method in interface com.zebra.sdk.zxp.job.JobControlHelperUtilZxp
Returns the print optimization mode.
getPrintType() - Method in class com.zebra.sdk.common.card.graphics.ZebraCardGraphics
Returns the type of print to be performed for the given image data.
getQRCode(ZebraGraphics) - Static method in class com.zebra.sdk.common.card.graphics.barcode.ZebraBarcodeFactory
Returns the barcode utilites class for QR Code barcodes.
getQuietZoneWidth() - Method in interface com.zebra.sdk.common.card.graphics.barcode.BarcodeUtil
Returns the width of the quiet zone.
getRange() - Method in class com.zebra.sdk.settings.Setting
Returns a string that describes the acceptable range of values for this setting.
getReservationStatus(int) - Method in interface com.zebra.sdk.zmotif.job.JobUtilZmotif
Queries the printer and returns the current status of the printer from the supplied reservation token.
getRibbonPanelIntensity(CardSide, RibbonPanelType) - Method in interface com.zebra.sdk.zxp.job.JobControlHelperUtilZxp
Returns the requested ribbon panels intensity values.
getRowHeight() - Method in interface com.zebra.sdk.common.card.graphics.barcode.CodePDF417Util
Returns the height of the rows.
getSensorStates() - Method in interface com.zebra.sdk.common.card.device.DeviceUtil
Returns the printer's sensor states.
getSensorValues() - Method in interface com.zebra.sdk.common.card.device.DeviceUtil
Returns the printer's sensor values.
getSerialNumber() - Method in class com.zebra.sdk.comm.UsbConnection
 
getSettingRange(String) - Method in interface com.zebra.sdk.settings.SettingsProvider
Retrieves the allowable range for a setting.
getSettingsValues(List<String>) - Method in interface com.zebra.sdk.settings.SettingsProvider
Retrieves the device's setting values for a list of setting IDs.
getSettingType(String) - Method in interface com.zebra.sdk.settings.SettingsProvider
Returns the data type of the setting.
getSettingValue(String) - Method in interface com.zebra.sdk.settings.SettingsProvider
Retrieves the device's setting value for a setting id.
getShape() - Method in interface com.zebra.sdk.common.card.graphics.barcode.CodeDataMatrixUtil
Gets the requested shape for the generated barcodes.
getShortBarHeight() - Method in interface com.zebra.sdk.common.card.graphics.barcode.CodePostnetUtil
Returns the height of a short bar.
getSimpleConnectionName() - Method in interface com.zebra.sdk.comm.Connection
Return a human-readable description of the connection.
getSimpleConnectionName() - Method in class com.zebra.sdk.comm.TcpConnection
Return the IP address as the description.
getSimpleConnectionName() - Method in class com.zebra.sdk.comm.UsbConnection
 
getSmartCardConfiguration() - Method in interface com.zebra.sdk.common.card.device.DeviceUtil
getSmartCardConfigurations() - Method in interface com.zebra.sdk.common.card.device.DeviceUtil
Returns the printer's smart card configuration.
getSmartCardOffset() - Method in interface com.zebra.sdk.zmotif.settings.SettingsHelperUtilZmotif
Gets the smart card offset ParameterInfo object.
getStandbyTimeout() - Method in interface com.zebra.sdk.zmotif.settings.SettingsHelperUtilZmotif
Gets the printer's standby timeout.
getTemplate() - Method in interface com.zebra.sdk.common.card.graphics.barcode.CodeEAN128Util
Gets the message template with the fields for the EAN message.
getTemplate(String) - Method in interface com.zebra.sdk.common.card.job.template.ZebraTemplate
Returns the specified template.
getTemplate(String) - Method in class com.zebra.sdk.common.card.template.ZebraCardTemplate
 
getTemplateDataFields(String) - Method in interface com.zebra.sdk.common.card.job.template.ZebraTemplate
Returns a list of the template fields from the XML template data.
getTemplateDataFields(String) - Method in class com.zebra.sdk.common.card.template.ZebraCardTemplate
 
getTemplateFields(String) - Method in interface com.zebra.sdk.common.card.job.template.ZebraTemplate
Returns the template fields from the specified XML template.
getTemplateFields(String) - Method in class com.zebra.sdk.common.card.template.ZebraCardTemplate
 
getTemplateImageData(String) - Method in interface com.zebra.sdk.common.card.job.template.ZebraTemplate
Returns the raw image data from the specified image name.
getTemplateImageData(String) - Method in class com.zebra.sdk.common.card.template.ZebraCardTemplate
 
getTestPrintImageNames() - Method in interface com.zebra.sdk.zmotif.job.JobUtilZmotif
Queries the printer and returns a list of available test print image names.
For ZC Series printers only.
getText() - Method in enum com.zebra.sdk.common.card.enumerations.DataSource
Returns the string representation.
getText() - Method in enum com.zebra.sdk.common.card.enumerations.OCPLanguage
Returns the string representation.
getTimeToWaitForMoreData() - Method in interface com.zebra.sdk.comm.Connection
Returns the maximum time, in milliseconds, to wait in-between reads after the initial read.
getTimeToWaitForMoreData() - Method in class com.zebra.sdk.comm.ConnectionA
 
getTransferTemperatureOffset(TransferTemperatureType) - Method in interface com.zebra.sdk.zmotif.settings.SettingsHelperUtilZmotif
Gets the transfer temperature offset for the specified transfer sensor.
For ZMotif Series re-transfer printers only.
getType() - Method in class com.zebra.sdk.settings.Setting
Returns a string describing the data type of the setting.
getValue() - Method in enum com.zebra.sdk.common.card.enumerations.ATMMode
Returns the integer representation of the enumeration member.
getValue() - Method in enum com.zebra.sdk.common.card.enumerations.CalibrationTable
Returns the integer representation of the enumeration member.
getValue() - Method in enum com.zebra.sdk.common.card.enumerations.CapabilitiesType
Returns the integer representation of the capability type for the printer.
getValue() - Method in enum com.zebra.sdk.common.card.enumerations.CardDestination
Returns the integer representation of the enumeration member.
getValue() - Method in enum com.zebra.sdk.common.card.enumerations.CardSide
Returns the integer representation of the enumeration member.
getValue() - Method in enum com.zebra.sdk.common.card.enumerations.CardSource
Returns the integer representation of the enumeration member.
getValue() - Method in enum com.zebra.sdk.common.card.enumerations.CustomCard
Returns the integer representation.
getValue() - Method in enum com.zebra.sdk.common.card.enumerations.DataSource
Returns the integer representation.
getValue() - Method in enum com.zebra.sdk.common.card.enumerations.ErrorControlLevel
Returns the string representation of the enumeration member.
getValue() - Method in enum com.zebra.sdk.common.card.enumerations.FillType
Returns the integer representation of the enumeration member.
getValue() - Method in enum com.zebra.sdk.common.card.enumerations.GraphicType
Returns the integer representation.
getValue() - Method in enum com.zebra.sdk.common.card.enumerations.ImageRotation
Returns the integer representation.
getValue() - Method in enum com.zebra.sdk.common.card.enumerations.IPVersion
Returns the integer representation.
getValue() - Method in enum com.zebra.sdk.common.card.enumerations.LogType
Returns the integer representation.
getValue() - Method in enum com.zebra.sdk.common.card.enumerations.MediaType
Returns the integer representation.
getValue() - Method in enum com.zebra.sdk.common.card.enumerations.OCPLanguage
Returns the integer representation.
getValue() - Method in enum com.zebra.sdk.common.card.enumerations.PrinterType
Returns the integer representation.
getValue() - Method in enum com.zebra.sdk.common.card.enumerations.PrintOptimizationMode
Returns the integer representation.
getValue() - Method in enum com.zebra.sdk.common.card.enumerations.PrintType
Returns the integer representation.
getValue() - Method in enum com.zebra.sdk.common.card.enumerations.ReservationType
Returns the integer representation.
getValue() - Method in enum com.zebra.sdk.common.card.enumerations.SmartCardType
Returns the integer representation.
getValue() - Method in enum com.zebra.sdk.common.card.enumerations.Timeout
Returns the integer representation of the enumeration member.
getValue() - Method in enum com.zebra.sdk.common.card.enumerations.TrackNumber
Returns the integer representation.
getValue() - Method in enum com.zebra.sdk.common.card.graphics.barcode.enumerations.LogicalHeight
Returns the integer representation of the enumeration member.
getValue() - Method in enum com.zebra.sdk.common.card.graphics.barcode.enumerations.Rotation
Returns the integer representation of the enumeration member.
getValue() - Method in enum com.zebra.sdk.common.card.graphics.enumerations.RotationType
Returns the integer representation.
getValue() - Method in class com.zebra.sdk.settings.Setting
Returns the setting's value.
getVerticalQuietZone() - Method in interface com.zebra.sdk.common.card.graphics.barcode.BarcodeUtil
Returns the vertical quiet zone.
getWideFactor() - Method in interface com.zebra.sdk.common.card.graphics.barcode.Code39Util
Returns the factor by which wide bars are broader than narrow bars.
getWideFactor() - Method in interface com.zebra.sdk.common.card.graphics.barcode.CodeCodabarUtil
Returns the factor by which wide bars are broader than narrow bars.
getWideFactor() - Method in interface com.zebra.sdk.common.card.graphics.barcode.CodeInterleaved2Of5Util
Returns the factor by which wide bars are broader than narrow bars.
getWidthToHeightRatio() - Method in interface com.zebra.sdk.common.card.graphics.barcode.CodePDF417Util
Gets the ratio of the barcode width to the height.
getWirelessParameters() - Method in interface com.zebra.sdk.zmotif.settings.SettingsHelperUtilZmotif
Gets the wireless network information.
getWirelessRadioStatus() - Method in interface com.zebra.sdk.zmotif.device.DeviceUtilZmotif
Queries the printer and returns the wireless radio status.
getWirelessStatus() - Method in interface com.zebra.sdk.zmotif.device.DeviceUtilZmotif
Queries the printer and returns the wireless status.
getXOffset(CardSide) - Method in interface com.zebra.sdk.zxp.settings.SettingsHelperUtilZxp
Returns the x-offset for the specified card side.
getYOffset(CardSide) - Method in interface com.zebra.sdk.zxp.settings.SettingsHelperUtilZxp
Returns the y-offset for the specified card side.
getZebraDriverPrinters() - Static method in class com.zebra.sdk.printer.discovery.UsbDiscoverer
Enumerate locally installed Zebra Designer Drivers.
getZebraUsbPrinters() - Static method in class com.zebra.sdk.printer.discovery.UsbDiscoverer
Enumerate all currently connected Zebra USB printers.
getZebraUsbPrinters(DiscoveredPrinterFilter) - Static method in class com.zebra.sdk.printer.discovery.UsbDiscoverer
Enumerate currently connected Zebra USB printers that meet the specified DiscoveredPrinterFilter criteria.
getZmotifPrinter(Connection) - Static method in class com.zebra.sdk.common.card.printer.ZebraCardPrinterFactory
Creates a wrapper around a Zebra printer that provides access to the ZebraPrinterZmotif object from Connection.
getZxpPrinter(Connection) - Static method in class com.zebra.sdk.common.card.printer.ZebraCardPrinterFactory
Creates a wrapper around a Zebra printer that provides access to ZebraPrinterZxp object from Connection.
graphicData - Variable in class com.zebra.sdk.common.card.containers.GraphicsInfo
Bitmap image data.
graphicsData - Variable in class com.zebra.sdk.common.card.containers.TemplateJob
A List of GraphicsInfo instances containing details of the images to be printed.
GraphicsInfo - Class in com.zebra.sdk.common.card.containers
Class for specifying the graphics information used during printing.
GraphicsInfo() - Constructor for class com.zebra.sdk.common.card.containers.GraphicsInfo
Instantiates the GraphicsInfo class.
graphicType - Variable in class com.zebra.sdk.common.card.containers.GraphicsInfo
GraphicType - Enum in com.zebra.sdk.common.card.enumerations
Specifies the type of image data.

H

hasBarcodeReader() - Method in interface com.zebra.sdk.zmotif.device.DeviceUtilZmotif
Queries the printer's configuration and returns true if the printer includes a barcode reader.
hashCode() - Method in class com.zebra.sdk.printer.discovery.DiscoveredPrinter
Returns a hash code for this DiscoveredPrinter.
hasLaminator() - Method in interface com.zebra.sdk.common.card.device.DeviceUtil
Returns true if the printer includes a laminator.
hasMagneticEncoder() - Method in interface com.zebra.sdk.common.card.device.DeviceUtil
Returns true if the printer includes a magnetic encoder.
hasQuietZone() - Method in interface com.zebra.sdk.common.card.graphics.barcode.BarcodeUtil
Indicates whether a quiet zone is included.
hasSmartCardEncoder() - Method in interface com.zebra.sdk.common.card.device.DeviceUtil
Returns true if the printer includes a smart card encoder.
HCB_BOOTLOADER_MODE - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
HCB: Bootloader mode - Firmware reload may be required
HCB_BULB_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
HCB: Bulb error
HCB_CONTROL_BOARD_MISSING - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
HCB: Control board missing
HCB_SENSOR_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
HCB: Sensor error
headType - Variable in class com.zebra.sdk.common.card.containers.MagneticEncoderInfo
The magnetic encoder type (ISO or JIS).
heaterVersion - Variable in class com.zebra.sdk.common.card.containers.PrinterInfo
Heater control board firmware version.
HumanReadablePlacement - Enum in com.zebra.sdk.common.card.graphics.barcode.enumerations
Enumeration for placement of the human readable portion of a barcode.

I

imageDataToImage(byte[]) - Method in class com.zebra.sdk.common.card.graphics.ZebraCardGraphics
 
imageDataToImage(byte[]) - Method in interface com.zebra.sdk.common.card.graphics.ZebraGraphics
Creates a BufferedImage object from the raw bitmap data.
ImagePosition - Enum in com.zebra.sdk.common.card.graphics.enumerations
Specifies the location of where the image is to be drawn relative to its layout rectangle.
ImageRotation - Enum in com.zebra.sdk.common.card.enumerations
Specifies the rotation of the image data.
imageToImageData(BufferedImage) - Method in class com.zebra.sdk.common.card.graphics.ZebraCardGraphics
 
imageToImageData(BufferedImage) - Method in interface com.zebra.sdk.common.card.graphics.ZebraGraphics
Converts a BufferedImage into it's raw image data
IMAGING_DRAWING_RENDER_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Imaging: Drawing render error
IMAGING_FONT_RENDER_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Imaging: Font render error
IMAGING_IMAGE_PROCESSING_ABORTED - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Imaging: Image processing aborted
IMAGING_IMAGE_TO_PRINT_AREA_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Imaging: Image to print area error
IMAGING_INCOMPLETE_IMAGE_DATA_RCVD - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Imaging: Received incomplete image data
IMAGING_INVALID_IMAGE_DATA - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Imaging: Invalid image processing data
IMAGING_JOB_SCHEDULER_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Imaging: Error sending IPD to job scheduler
IMAGING_PRINT_TO_MEDIA_AREA_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Imaging: Print to media area error
IMAGING_RECEIVE_IMAGE_DATA_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Imaging: Error receiving IPD
infrastructure - Variable in class com.zebra.sdk.common.card.containers.WirelessAccessPointInfo
Indicates if this access point is set up for infrastructure mode.
initialize(int, int, OrientationType, PrintType, Integer) - Method in class com.zebra.sdk.common.card.graphics.ZebraCardGraphics
 
initialize(int, int, OrientationType, PrintType, Color) - Method in class com.zebra.sdk.common.card.graphics.ZebraCardGraphics
 
initialize(int, int, OrientationType, PrintType, Color) - Method in interface com.zebra.sdk.common.card.graphics.ZebraGraphics
Initializes the drawing surface.
initialize(int, int, OrientationType, PrintType, Integer) - Method in interface com.zebra.sdk.common.card.graphics.ZebraGraphicsI
Initializes the drawing surface.
initialSize - Variable in class com.zebra.sdk.common.card.containers.MediaInfo
Initial media size.
inputDouble - Variable in class com.zebra.sdk.common.card.containers.TransferSpeeds
Double-sided input speed offset.
inputDoubleUV - Variable in class com.zebra.sdk.common.card.containers.TransferSpeeds
Double-sided UV input speed offset.
inputSingle - Variable in class com.zebra.sdk.common.card.containers.TransferSpeeds
Single-sided input speed offset.
inputSingleUV - Variable in class com.zebra.sdk.common.card.containers.TransferSpeeds
Single-sided UV input speed offset.
inSession - Variable in class com.zebra.sdk.common.card.containers.ReservationInfo
Indicates whether the printer is currently in session.
INTERNAL_ENCODER_CHANNEL - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Internal encoder communication channel.
INTERNAL_ENCODER_CONTACT_ENCODING - Static variable in class com.zebra.sdk.common.card.settings.ZebraCardSettingNames
Internal smart card contact encoder.
INTERNAL_ENCODER_CONTACTLESS_ENCODER - Static variable in class com.zebra.sdk.common.card.settings.ZebraCardSettingNames
Internal contactless smart card encoder.
INTERNAL_ENCODER_DEVICE_CLASS - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Internal smart card encoder device class.
INTERNAL_ENCODER_MANUFACTURER - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Internal smart card encoder manufacturer.
INTERNAL_ENCODER_PRODUCT - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Internal smart card encoder product.
INTERNAL_ENCODER_PRODUCT_ID - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Internal smart card product id.
INTERNAL_ENCODER_SERIAL_NUMBER - Static variable in class com.zebra.sdk.common.card.settings.ZebraCardSettingNames
Internal smart card encoder serial number.
INTERNAL_ENCODER_VENDOR_ID - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Internal smart card encoder vendor id.
internetProtocolVersions - Variable in class com.zebra.sdk.common.card.containers.DiscoveryConfiguration
Internet Protocol versions to use for discovery.
IpAddressable - Interface in com.zebra.sdk.comm
An interface defining methods associated with a device that may be addressed via an IP connection.
IPVersion - Enum in com.zebra.sdk.common.card.enumerations
Specifies the Internet Protocol to use during device discovery.
isCardPrefeed() - Method in interface com.zebra.sdk.zxp.settings.SettingsHelperUtilZxp
Returns the card pre-feed enabled state.
isCardPrinter - Variable in class com.zebra.sdk.comm.TcpConnection
For internal use of the Zebra Printer API only.
isConnected() - Method in interface com.zebra.sdk.comm.Connection
Returns true if the connection is open.
isConnected() - Method in class com.zebra.sdk.comm.ConnectionA
 
isDeleteAfter() - Method in interface com.zebra.sdk.zmotif.job.JobControlHelperUtilZmotif
Returns whether the image data will be deleted following a completed job.
isDeleteAfter() - Method in interface com.zebra.sdk.zxp.job.JobControlHelperUtilZxp
Returns whether or not the printer will delete the current job after successfully completing.
isDeviceInSession() - Method in interface com.zebra.sdk.zmotif.job.JobUtilZmotif
Queries the printer and returns whether the printer is currently in session.
isEnableOCPReprint() - Method in interface com.zebra.sdk.zmotif.job.JobControlHelperUtilZmotif
Returns whether the OCP reprint button is enabled.
isEncryptionEnabled() - Method in interface com.zebra.sdk.zmotif.device.DeviceUtilZmotif
Returns whether encryption is enabled on the printer.
isExtendedCharSetEnabled() - Method in interface com.zebra.sdk.common.card.graphics.barcode.Code39Util
Indicates whether the extended character set is enabled.
isHostAuthenticationEnabled() - Method in interface com.zebra.sdk.zmotif.device.DeviceUtilZmotif
Returns whether host authentication mode is enabled.
isJobSettingReadOnly(String) - Method in interface com.zebra.sdk.common.card.job.JobControlProvider
Returns true if the setting's value is read-only for the given setting.
isJobSettingValid(String, String) - Method in interface com.zebra.sdk.common.card.job.JobControlProvider
Returns true if the setting's value is valid for the given setting.
isJobSettingWriteOnly(String) - Method in interface com.zebra.sdk.common.card.job.JobControlProvider
Returns true if the setting's value is write-only for the given setting.
isKPanelOverwrite(CardSide) - Method in interface com.zebra.sdk.zmotif.job.JobControlHelperUtilZmotif
Returns whether or not monochrome panel overwrite has been selected for the specified card side.
isMagVerification() - Method in interface com.zebra.sdk.zmotif.job.JobControlHelperUtilZmotif
Returns whether magnetic encoding write verification should be performed.
isMagVerification() - Method in interface com.zebra.sdk.zxp.job.JobControlHelperUtilZxp
Returns whether or not the current job will verify the magnetic encoding.
isReadOnly() - Method in class com.zebra.sdk.settings.Setting
Returns true if the setting does not have write access.
isResponseComplete(byte[]) - Method in interface com.zebra.sdk.comm.ResponseValidator
Provide a method to determine whether a response from the printer is a complete response.
isSettingReadOnly(String) - Method in interface com.zebra.sdk.settings.SettingsProvider
Returns true if the setting is read only.
isSettingValid(String, String) - Method in interface com.zebra.sdk.settings.SettingsProvider
Returns true if value is valid for the given setting.
isSettingWriteOnly(String) - Method in interface com.zebra.sdk.settings.SettingsProvider
Returns true if the setting is write only.
isValid(String) - Method in class com.zebra.sdk.settings.Setting
Returns true if value is valid for the given setting.
isWriteOnly() - Method in class com.zebra.sdk.settings.Setting
Returns true if the setting does not have read access.

J

JOB_ABORTED - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Job: Job aborted
JOB_BUFFER_FULL - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Job: Job buffer full
JOB_CANCELLED - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Job: Job cancelled
JOB_CREATE_JOB_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Job: Create job error
JOB_EP_PROCESSING_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Job: EP Processing error
JOB_ID_NOT_FOUND - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Job: Job ID not found
JOB_INSUFFICIENT_MEMORY_AVAILABLE - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Job: Insufficient memory available to accept job
JOB_QUEUE_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Job: Queue error
JobConfigInfo - Class in com.zebra.sdk.common.card.containers
Class for configuring a print jobs settings.
JobConfigInfo() - Constructor for class com.zebra.sdk.common.card.containers.JobConfigInfo
Instantiates the JobConfigInfo class.
jobControlHelper() - Method in interface com.zebra.sdk.common.card.printer.ZebraPrinterZmotif
Returns the JobControlHelperUtilZmotif object.
jobControlHelper() - Method in interface com.zebra.sdk.common.card.printer.ZebraPrinterZxp
Returns the JobControlHelperUtilZxp object.
JobControlHelperUtilZmotif - Interface in com.zebra.sdk.zmotif.job
Interface for configuring job-related parameters.

Note: All job settings must be set separately for each job.
JobControlHelperUtilZxp - Interface in com.zebra.sdk.zxp.job
Interface for configuring job related parameters.
JobControlProvider - Interface in com.zebra.sdk.common.card.job
Interface that provides access to job-related settings.
Note: Job settings are not persistent and must be set prior to each job.

jobErrors - Variable in class com.zebra.sdk.common.card.containers.PrinterStatusInfo
Number of job errors.
jobId - Variable in class com.zebra.sdk.common.card.containers.JobStatus
Job ID.
jobInfo - Variable in class com.zebra.sdk.common.card.containers.TemplateJob
contains JobConfigInfo
jobsActive - Variable in class com.zebra.sdk.common.card.containers.PrinterStatusInfo
Number of active jobs.
jobsComplete - Variable in class com.zebra.sdk.common.card.containers.PrinterStatusInfo
Number of jobs completed.
JobSideConfigInfo - Class in com.zebra.sdk.common.card.containers
Class for configuring the card side properties.
JobSideConfigInfo() - Constructor for class com.zebra.sdk.common.card.containers.JobSideConfigInfo
Instantiates the JobSideConfigInfo class.
jobSideInfo - Variable in class com.zebra.sdk.common.card.containers.TemplateJob
contains JobSideConfigInfo Key = Card side.
jobsPending - Variable in class com.zebra.sdk.common.card.containers.PrinterStatusInfo
Number of pending jobs.
JobStatus - Class in com.zebra.sdk.common.card.containers
Class for holding the printer's job history information.
JobStatus() - Constructor for class com.zebra.sdk.common.card.containers.JobStatus
Instantiates the JobStatus class.
JobStatusInfo - Class in com.zebra.sdk.common.card.containers
Class for holding job status information for the specified job ID.
JobStatusInfo() - Constructor for class com.zebra.sdk.common.card.containers.JobStatusInfo
 
jobsTotal - Variable in class com.zebra.sdk.common.card.containers.PrinterStatusInfo
Total number of jobs.
JobUtil - Interface in com.zebra.sdk.common.card.job
An interface used to define functions used in job-related operations.
JobUtilZmotif - Interface in com.zebra.sdk.zmotif.job
Interface for job related tasks and information.

K

K_COLOR_SPEED_ADJUST - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
K-color print speed adjustment.
K_COLOR_X_OFFSET - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
K-color print x-offset.
K_MONO_SPEED_ADJUST - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
K-mono print speed adjustment.
K_MONO_X_OFFSET - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
K-mono print x-offset.
K_OPTIMIZATION_BACK - Static variable in class com.zebra.sdk.common.card.jobSettings.ZebraCardJobSettingNames
Monochrome optimization back.
K_OPTIMIZATION_FRONT - Static variable in class com.zebra.sdk.common.card.jobSettings.ZebraCardJobSettingNames
Monochrome optimization front.
K_OVERWRITE_BACK - Static variable in class com.zebra.sdk.zmotif.job.ZebraCardJobSettingNamesZmotif
Monochrome overwrite back.
K_OVERWRITE_FRONT - Static variable in class com.zebra.sdk.zmotif.job.ZebraCardJobSettingNamesZmotif
Monochrome overwrite front.
K_PREHEAT_BACK - Static variable in class com.zebra.sdk.zmotif.job.ZebraCardJobSettingNamesZmotif
The amount of baseline energy used on the non-printed (white areas) of the card for back side monochrome printing.
K_PREHEAT_FRONT - Static variable in class com.zebra.sdk.zmotif.job.ZebraCardJobSettingNamesZmotif
The amount of baseline energy used on the non-printed (white areas) of the card for front side monochrome printing.
KIOSK_MODE - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Kiosk mode.
For ZC Series printers only.
kMode - Variable in class com.zebra.sdk.common.card.containers.JobSideConfigInfo
Sets the monochrome optimization type.
KOptimizationType - Enum in com.zebra.sdk.common.card.enumerations
Specifies the monochrome optimization mode.
KRESIN_PANEL_INTENSITY_BACK - Static variable in class com.zebra.sdk.zxp.job.ZebraCardJobSettingNamesZxp
Back Optional Panel Intensity.
KRESIN_PANEL_INTENSITY_FRONT - Static variable in class com.zebra.sdk.zxp.job.ZebraCardJobSettingNamesZxp
Front Optional Panel Intensity.

L

LAMINATE_ADJ_BOTTOM_TEMP - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Laminate temperature adjustment bottom.
LAMINATE_ADJ_BOTTOM_X_FINE_OFFSET - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Laminate fine x-offset adjustment bottom.
LAMINATE_ADJ_COARSE_X_OFFSET - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Laminate coarse x-offset adjustment.
LAMINATE_ADJ_PASSTHRU_SPEED - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Laminate pass-thru speed adjustment.
LAMINATE_ADJ_PATCH_LEN - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Laminate patch length adjustment.
LAMINATE_ADJ_SPEED - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Laminate speed adjustment.
LAMINATE_ADJ_TOP_TEMP - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Laminate temperature adjustment top.
LAMINATE_ADJ_TOP_X_FINE_OFFSET - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Laminate fine x-offset adjustment top.
LAMINATE_BOTTOM_DESCRIPTION - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Laminate description bottom.
LAMINATE_BOTTOM_INITIAL_SIZE - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Laminate initial size bottom.
LAMINATE_BOTTOM_OEM - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Laminate OEM bottom.
LAMINATE_BOTTOM_PANELS_REMAINING - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Laminate panels remaining bottom.
LAMINATE_BOTTOM_REGISTRATION - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Laminate registration bottom.
LAMINATE_BOTTOM_THICKNESS - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Laminate thickness bottom.
LAMINATE_BOTTOM_TYPE - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Laminate type bottom.
LAMINATE_BOTTOM_WIDTH - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Laminate width bottom.
LAMINATE_TOP_DESCRIPTION - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Laminate description top.
LAMINATE_TOP_INITIAL_SIZE - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Laminate initial size top.
LAMINATE_TOP_OEM - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Laminate OEM top.
LAMINATE_TOP_PANELS_REMAINING - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Laminate panels remaining top.
LAMINATE_TOP_REGISTRATION - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Laminate registration top.
LAMINATE_TOP_THICKNESS - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Laminate thickness top.
LAMINATE_TOP_TYPE - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Laminate type top.
LAMINATE_TOP_WIDTH - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Laminate width top.
LAMINATOR_BOOTLOADER_MODE - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Laminator: Bootloader mode - Firmware reload may be required
LAMINATOR_BOTTOM_CUTTER_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Laminator: Bottom cutter failure - Power off printer and correct problem
LAMINATOR_BOTTOM_CUTTER_STALL - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Laminator: Bottom cutter stall - Power off printer and correct problem
LAMINATOR_BOTTOM_HEATER_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Laminator: Bottom heater error - Power off printer and correct problem
LAMINATOR_BOTTOM_HEATER_OVER_TEMP - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Laminator: Bottom heater over temperature - Power off printer and correct problem
LAMINATOR_BOTTOM_LAMINATE_FEED_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Laminator: Bottom laminate feed error
LAMINATOR_BOTTOM_LAMINATE_REG_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Laminator: Bottom laminate registration error
LAMINATOR_BOTTOM_SENSOR_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Laminator: Bottom sensor failure - Power off printer and correct problem
LAMINATOR_DOOR_OPEN - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Laminator: Door open
LAMINATOR_EARLY_CARD_JAM - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Laminator: Early card jam
LAMINATOR_EEPROM_CORRUPT - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Laminator: EEPROM corrupt
LAMINATOR_FAN_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Laminator: Fan failure - Power off printer and correct problem
LAMINATOR_INIT_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Laminator: Initialization error
LAMINATOR_INITIALIZING - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Laminator: Initializing
LAMINATOR_INVALID_BOTTOM_LAMINATE - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Laminator: Invalid bottom laminate
LAMINATOR_INVALID_TOP_LAMINATE - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Laminator: Invalid top laminate
LAMINATOR_LATE_CARD_JAM - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Laminator: Late card jam
LAMINATOR_MAB_BOOTLOADER_MODE - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Laminator: MAB Bootloader mode - Firmware reload may be required
LAMINATOR_MAB_MISSING - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Laminator: Media authentication board missing
LAMINATOR_MID_CARD_JAM - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Laminator: Mid card jam
LAMINATOR_MISSING - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Laminator: Missing laminator
LAMINATOR_OUT_OF_BOTTOM_LAMINATE - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Laminator: Out of bottom laminate
LAMINATOR_OUT_OF_TOP_AND_BOTTOM_LAMINATE - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Laminator: Out of top and bottom laminate
LAMINATOR_OUT_OF_TOP_LAMINATE - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Lamintaor: Out of top laminate
LAMINATOR_POLL_TIMEOUT - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Laminator: Poll timeout
LAMINATOR_REMOIVE_TOP_AND_BOTTOM_LAMINATE - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Laminator: Remove top and bottom laminate
LAMINATOR_REMOVE_BOTTOM_LAMINATE - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Laminator: Remove bottom laminate
LAMINATOR_REMOVE_TOP_LAMINATE - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Laminator: Remove top laminate
LAMINATOR_STAGING_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Laminator: Staging error
LAMINATOR_TOP_CUTTER_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Laminator: Top cutter failure - Power off printer and correct problem
LAMINATOR_TOP_CUTTER_STALL - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Laminator: Top cutter stall - Power off printer and correct problem
LAMINATOR_TOP_HEATER_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Laminator: Top heater error - Power off printer and correct problem
LAMINATOR_TOP_HEATER_OVER_TEMP - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Laminator: Top heater over temperature - Power off printer and correct problem
LAMINATOR_TOP_LAMINATE_FEED_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Lamintaor: Top laminate feed error
LAMINATOR_TOP_LAMINATE_REG_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Laminator: Top laminate registration error
LAMINATOR_TOP_SENSOR_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Laminator: Top sensor failure - Power off printer and correct problem
LAMINATOR_UNKNOWN_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Laminator: Unknown error
laminatorAdjustments - Variable in class com.zebra.sdk.common.card.containers.CardTypeInfo
Laminator adjustment values.
LaminatorAdjustments - Class in com.zebra.sdk.common.card.containers
Class for holding information about the laminator's adjustment parameters.
Part of container CardTypeInfo.
LaminatorAdjustments() - Constructor for class com.zebra.sdk.common.card.containers.LaminatorAdjustments
Instantiates the LaminatorAdjustments class.
LaminatorCardCountInfo - Class in com.zebra.sdk.common.card.containers
Container holding the laminator's card count information.
LaminatorCardCountInfo() - Constructor for class com.zebra.sdk.common.card.containers.LaminatorCardCountInfo
Instantiates the LaminatorCardCountInfo class
LaminatorInfo - Class in com.zebra.sdk.common.card.containers
Class for holding information about the printer's laminator.
Contained in ZebraPrinterZmotif.
LaminatorInfo() - Constructor for class com.zebra.sdk.common.card.containers.LaminatorInfo
Instantiates the LaminatorInfo class.
LaminatorOffsetType - Enum in com.zebra.sdk.common.card.enumerations
Specifies the laminator offset type to get or set.
LaminatorUtilZmotif - Interface in com.zebra.sdk.zmotif.device
Interface for laminator utility functions
language - Variable in class com.zebra.sdk.common.card.containers.OCPSettings
OCP language.
LCD_BRIGHTNESS - Static variable in class com.zebra.sdk.zxp.settings.ZebraCardSettingNamesZxp
LCD brightness.
LCD_CONTRAST - Static variable in class com.zebra.sdk.common.card.settings.ZebraCardSettingNames
LCD contrast.
LCD_DISPLAY_AVAILABLE - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Indicates whether or not the printer has a display panel.
For ZC Series printers only.
line - Variable in class com.zebra.sdk.common.card.containers.OCPDisplayInfo
Map containing the individual OCP line data.
loadCalibrationTableData(String) - Method in interface com.zebra.sdk.zmotif.settings.SettingsHelperUtilZmotif
Loads the calibration table data from an XML calibration data document.
For ZMotif Series 7, 8, and 9 printers only.
localBroadcast(DiscoveryHandler) - Static method in class com.zebra.sdk.common.card.printer.discovery.NetworkCardDiscoverer
Sends a local broadcast packet.
lock - Variable in class com.zebra.sdk.common.card.containers.OCPDisplayInfo
Indicates whether or not to lock the OCP display.
For ZMotif Series printers only.
LogicalHeight - Enum in com.zebra.sdk.common.card.graphics.barcode.enumerations
Enumeration for retrieving the Postnet bar height.
LogStreamException - Exception in com.zebra.sdk.comm
Signals that an error has occurred while writing to the connections log stream.
LogStreamException(String) - Constructor for exception com.zebra.sdk.comm.LogStreamException
Constructs a LogStreamException with message as the detailed error message.
LogType - Enum in com.zebra.sdk.common.card.enumerations
Specifies the type of log to get.
For ZMotif and ZC Series printers only.

M

MAB_BOOTLOADER_MODE - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
MAB: Bootloader mode - Firmware reload may be required
MAB_CONTROL_BOARD_MISSING - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
MAB: Control board missing
macAddress - Variable in class com.zebra.sdk.common.card.containers.NetworkInfo
MAC address.
Note: Read-only.
macAddress - Variable in class com.zebra.sdk.common.card.containers.PrinterInfo
Printer's MAC address.
macAddress - Variable in class com.zebra.sdk.common.card.containers.WirelessNetworkInfo
MAC address (read-only).
MAG_COERCIVITY - Static variable in class com.zebra.sdk.common.card.jobSettings.ZebraCardJobSettingNames
Magnetic encoding coercivity.
MAG_ENCODE_SIDE - Static variable in class com.zebra.sdk.common.card.jobSettings.ZebraCardJobSettingNames
Magnetic encode card side.
MAG_ENCODE_SPEED_ADJUST - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Magnetic encode speed adjustment.
MAG_ENCODING_TYPE - Static variable in class com.zebra.sdk.common.card.jobSettings.ZebraCardJobSettingNames
Magnetic encoding type.
MAG_NO_DATA_READ - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Mag: No data read
MAG_NO_STRIPE_DETECTED - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Mag: No magnetic stripe detected
MAG_QUIET_ZONE - Static variable in class com.zebra.sdk.zxp.settings.ZebraCardSettingNamesZxp
Magnetic encode quiet zone.
MAG_READ_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Mag: Read error
MAG_RECV_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Mag: Receive error
MAG_TRACK_1_BITS - Static variable in class com.zebra.sdk.zmotif.job.ZebraCardJobSettingNamesZmotif
Magnetic track 1 bits per character.
MAG_TRACK_1_DENSITY - Static variable in class com.zebra.sdk.common.card.jobSettings.ZebraCardJobSettingNames
Magnetic track 1 density.
MAG_TRACK_1_ENCODING_TYPE - Static variable in class com.zebra.sdk.zmotif.job.ZebraCardJobSettingNamesZmotif
Magnetic track 1 encoding type.
MAG_TRACK_1_FORMAT - Static variable in class com.zebra.sdk.zmotif.job.ZebraCardJobSettingNamesZmotif
Magnetic track 1 format.
MAG_TRACK_1_LEADING_ZEROS - Static variable in class com.zebra.sdk.zmotif.job.ZebraCardJobSettingNamesZmotif
Magnetic track 1 leading zeros for start sentinel positioning.
Specifies the number of leading zeros from the edge of the card.
MAG_TRACK_1_LRC_PARITY - Static variable in class com.zebra.sdk.zmotif.job.ZebraCardJobSettingNamesZmotif
Magnetic track 1 LRC character parity.
For ZC Series printers only.
MAG_TRACK_1_OFFSET - Static variable in class com.zebra.sdk.zmotif.job.ZebraCardJobSettingNamesZmotif
Magnetic track 1 start sentinel offset (mm).
For ZC Series printers only.

Specifies the position of the start sentinel from the edge of the card.
The MAG_TRACK_1_LEADING_ZEROS setting is recalculated from the offset and density parameters.
MAG_TRACK_1_PARITY - Static variable in class com.zebra.sdk.zmotif.job.ZebraCardJobSettingNamesZmotif
Magnetic track 1 data parity.
MAG_TRACK_1_SENTINEL_END - Static variable in class com.zebra.sdk.zmotif.job.ZebraCardJobSettingNamesZmotif
Magnetic track 1 end sentinel.
MAG_TRACK_1_SENTINEL_FORMAT - Static variable in class com.zebra.sdk.zmotif.job.ZebraCardJobSettingNamesZmotif
Magnetic track 1 sentinel format.
MAG_TRACK_1_SENTINEL_START - Static variable in class com.zebra.sdk.zmotif.job.ZebraCardJobSettingNamesZmotif
Magnetic track 1 start sentinel.
MAG_TRACK_1_START_SENTINEL_CORRECTION - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Mag track 1 start sentinel correction.
MAG_TRACK_1_START_SENTINEL_POSITION - Static variable in class com.zebra.sdk.zxp.settings.ZebraCardSettingNamesZxp
Magnetic track 1 start sentinel position.
MAG_TRACK_2_BITS - Static variable in class com.zebra.sdk.zmotif.job.ZebraCardJobSettingNamesZmotif
Magnetic track 2 bits per character.
MAG_TRACK_2_DENSITY - Static variable in class com.zebra.sdk.common.card.jobSettings.ZebraCardJobSettingNames
Magnetic track 2 density.
MAG_TRACK_2_ENCODING_TYPE - Static variable in class com.zebra.sdk.zmotif.job.ZebraCardJobSettingNamesZmotif
Magnetic track 2 encoding type.
MAG_TRACK_2_FORMAT - Static variable in class com.zebra.sdk.zmotif.job.ZebraCardJobSettingNamesZmotif
Magnetic track 2 format.
MAG_TRACK_2_LEADING_ZEROS - Static variable in class com.zebra.sdk.zmotif.job.ZebraCardJobSettingNamesZmotif
Magnetic track 2 leading zeros for start sentinel positioning.
Specifies the number of leading zeros from the edge of the card.
MAG_TRACK_2_LRC_PARITY - Static variable in class com.zebra.sdk.zmotif.job.ZebraCardJobSettingNamesZmotif
Magnetic track 2 LRC character parity.
For ZC Series printers only.
MAG_TRACK_2_OFFSET - Static variable in class com.zebra.sdk.zmotif.job.ZebraCardJobSettingNamesZmotif
Magnetic track 2 start sentinel offset (mm).
For ZC Series printers only.

Specifies the position of the start sentinel from the edge of the card.
The MAG_TRACK_2_LEADING_ZEROS setting is recalculated from the offset and density parameters.
MAG_TRACK_2_PARITY - Static variable in class com.zebra.sdk.zmotif.job.ZebraCardJobSettingNamesZmotif
Magnetic track 2 data parity.
MAG_TRACK_2_SENTINEL_END - Static variable in class com.zebra.sdk.zmotif.job.ZebraCardJobSettingNamesZmotif
Magnetic track 2 end sentinel.
MAG_TRACK_2_SENTINEL_FORMAT - Static variable in class com.zebra.sdk.zmotif.job.ZebraCardJobSettingNamesZmotif
Magnetic track 2 sentinel format.
MAG_TRACK_2_SENTINEL_START - Static variable in class com.zebra.sdk.zmotif.job.ZebraCardJobSettingNamesZmotif
Magnetic track 2 start sentinel.
MAG_TRACK_2_START_SENTINEL_CORRECTION - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Mag track 2 start sentinel correction.
MAG_TRACK_2_START_SENTINEL_POSITION - Static variable in class com.zebra.sdk.zxp.settings.ZebraCardSettingNamesZxp
Magnetic track 2 start sentinel position.
MAG_TRACK_3_BITS - Static variable in class com.zebra.sdk.zmotif.job.ZebraCardJobSettingNamesZmotif
Magnetic track 3 bits per character.
MAG_TRACK_3_DENSITY - Static variable in class com.zebra.sdk.common.card.jobSettings.ZebraCardJobSettingNames
Magnetic track 3 density.
MAG_TRACK_3_ENCODING_TYPE - Static variable in class com.zebra.sdk.zmotif.job.ZebraCardJobSettingNamesZmotif
Magnetic track 3 encoding type.
MAG_TRACK_3_FORMAT - Static variable in class com.zebra.sdk.zmotif.job.ZebraCardJobSettingNamesZmotif
Magnetic track 3 format.
MAG_TRACK_3_LEADING_ZEROS - Static variable in class com.zebra.sdk.zmotif.job.ZebraCardJobSettingNamesZmotif
Magnetic track 3 leading zeros for start sentinel positioning.
Specifies the number of leading zeros from the edge of the card.
MAG_TRACK_3_LRC_PARITY - Static variable in class com.zebra.sdk.zmotif.job.ZebraCardJobSettingNamesZmotif
Magnetic track 3 LRC character parity.
For ZC Series printers only.
MAG_TRACK_3_OFFSET - Static variable in class com.zebra.sdk.zmotif.job.ZebraCardJobSettingNamesZmotif
Magnetic track 3 start sentinel offset (mm).
For ZC Series printers only.

Specifies the position of the start sentinel from the edge of the card.
The MAG_TRACK_3_LEADING_ZEROS setting is recalculated from the offset and density parameters.
MAG_TRACK_3_PARITY - Static variable in class com.zebra.sdk.zmotif.job.ZebraCardJobSettingNamesZmotif
Magnetic track 3 data parity.
MAG_TRACK_3_SENTINEL_END - Static variable in class com.zebra.sdk.zmotif.job.ZebraCardJobSettingNamesZmotif
Magnetic track 3 end sentinel.
MAG_TRACK_3_SENTINEL_FORMAT - Static variable in class com.zebra.sdk.zmotif.job.ZebraCardJobSettingNamesZmotif
Magnetic track 3 sentinel format.
MAG_TRACK_3_SENTINEL_START - Static variable in class com.zebra.sdk.zmotif.job.ZebraCardJobSettingNamesZmotif
Magnetic track 3 start sentinel.
MAG_TRACK_3_START_SENTINEL_CORRECTION - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Mag track 3 start sentinel correction.
MAG_TRACK_3_START_SENTINEL_POSITION - Static variable in class com.zebra.sdk.zxp.settings.ZebraCardSettingNamesZxp
Magnetic track 3 start sentinel position.
MAG_VERIFY - Static variable in class com.zebra.sdk.common.card.jobSettings.ZebraCardJobSettingNames
Magnetic encoding verification.
MAG_WRITE_VERIFICATION_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Mag: Write verification error
MAG_X_OFFSET - Static variable in class com.zebra.sdk.common.card.settings.ZebraCardSettingNames
Magnetic encoder x-offset.
MagConfigInfo - Class in com.zebra.sdk.common.card.containers
Class for configuring a magnetic encoding job.
MagConfigInfo() - Constructor for class com.zebra.sdk.common.card.containers.MagConfigInfo
Instantiates the MagConfigInfo class.
magData - Variable in class com.zebra.sdk.common.card.containers.TemplateJob
Contains magnetic track data.
magEncode(int, String, String, String) - Method in interface com.zebra.sdk.common.card.job.JobUtil
Encodes a magnetic card for the current job.
MagEncoderType - Enum in com.zebra.sdk.common.card.enumerations
 
MagEncodingType - Enum in com.zebra.sdk.common.card.enumerations
Specifies the type of magnetic encoding to perform.
MAGENTA_PANEL_INTENSITY_BACK - Static variable in class com.zebra.sdk.zxp.job.ZebraCardJobSettingNamesZxp
Back Magenta Panel Intensity.
MAGENTA_PANEL_INTENSITY_FRONT - Static variable in class com.zebra.sdk.zxp.job.ZebraCardJobSettingNamesZxp
Front Magenta Panel Intensity.
MAGENTA_SPEED_ADJUST - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Magenta print speed adjustment.
MAGENTA_X_OFFSET - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Magenta print x-offset.
magInfo - Variable in class com.zebra.sdk.common.card.containers.TemplateJob
Contains configuration for a magnetic encoding job.
MagneticEncoderInfo - Class in com.zebra.sdk.common.card.containers
Class for getting the printer's magnetic encoder configuration.
MagneticEncoderInfo() - Constructor for class com.zebra.sdk.common.card.containers.MagneticEncoderInfo
Instantiates the MagneticEncoderInfo class.
MagneticEncoderOffsetInfo - Class in com.zebra.sdk.common.card.containers
Class for getting and/or setting the magnetic encoder offset values.
MagneticEncoderOffsetInfo() - Constructor for class com.zebra.sdk.common.card.containers.MagneticEncoderOffsetInfo
Instantiates the MagneticEncoderOffsetInfo class.
magneticEncoding - Variable in class com.zebra.sdk.common.card.containers.JobStatusInfo
Magnetic encoder status.
Example values: encoding, reading
MagSentinel - Class in com.zebra.sdk.common.card.containers
Class for getting and/or setting the individual magnetic encoder track sentinel configurations.
For ZMotif and ZC Series printers only.
MagSentinel() - Constructor for class com.zebra.sdk.common.card.containers.MagSentinel
Instantiates the MagSentinel class.
magStripe - Variable in class com.zebra.sdk.common.card.containers.CardTypeInfo
Returns true if magnetic stripe present.
MagTrackData - Class in com.zebra.sdk.common.card.containers
Class for magnetic encoder track data.
MagTrackData() - Constructor for class com.zebra.sdk.common.card.containers.MagTrackData
Instantiates the MagTrackData class.
manufactureDate - Variable in class com.zebra.sdk.common.card.containers.MediaInfo
Media manufacture date.
MAX_RETRIES - Static variable in class com.zebra.sdk.common.card.printer.discovery.NetworkDiscoveryConfiguration
 
MAX_TIMEOUT - Static variable in class com.zebra.sdk.common.card.printer.discovery.NetworkDiscoveryConfiguration
 
maxDataRate - Variable in class com.zebra.sdk.common.card.containers.WirelessAccessPointInfo
Maximum supported data rate.
MaxDevices - Variable in class com.zebra.sdk.common.card.printer.discovery.DiscoveryInfo
Maximum number of devices to discover.
maximumValue - Variable in class com.zebra.sdk.common.card.containers.ParameterInfo
Maximum allowed value.
MCU_FEEDER_BOOT_LOADER_MODE - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
MCU: Feeder control board in boot loader mode
MCU_FEEDER_COMM_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
MCU: Feeder control board communication error
MCU_FEEDER_FW_UPGRADE_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
MCU: Feeder control board firmware upgrade error
MCU_FEEDER_MISSING - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
MCU: Feeder missing
MCU_FLIPPER_BOOT_LOADER_MODE - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
MCU: Flipper control board in boot loader mode
MCU_FLIPPER_COMM_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
MCU: Flipper control board communication error
MCU_FLIPPER_FW_UPGRADE_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
MCU: Flipper control board firmware upgrade error
MCU_FLIPPER_MISSING - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
MCU: Flipper missing
MCU_OPTIONS_BOARD_FAILURE - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
MCU: Options control board failure
MCU_OPTIONS_BOOT_LOADER_MODE - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
MCU: Options control board in boot loader mode
MCU_OPTIONS_COMM_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
MCU: Options control board communication error
MCU_OPTIONS_FW_UPGRADE_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
MCU: Options control board firmware upgrade error
MCU_OPTIONS_MISSING - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
MCU: Options missing
MCU_SENSOR_BOOT_LOADER_MODE - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
MCU: Sensor control board in boot loader mode
MCU_SENSOR_COMM_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
MCU: Sensor communication error
MCU_SENSOR_FW_UPGRADE_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
MCU: Sensor control board firmware upgrade error
MCU_SENSOR_MISSING - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
MCU: Sensor missing
MEDIA_CARD_FEEDER_EMPTY - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Media: Card feeder is empty
MEDIA_CARD_JAM - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Media: Card jam
MEDIA_CARD_NOT_DETECTED - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Media: Card not detected
MEDIA_INSERT_CARD_TIMEOUT - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Media: Insert card timeout
MEDIA_INVALID_CARD_TYPE - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Media: Invalid card type
MEDIA_INVALID_RETRANSFER_MEDIA - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Media: Invalid retransfer media
MEDIA_INVALID_RETRANSFER_MEDIA_MAC - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Media: Invalid retransfer media MAC
MEDIA_OUT_OF_CARDS - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Media: Out of cards
MEDIA_OUT_OF_RETRANSFER_MEDIA - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Media: Out of retransfer media
MEDIA_RETRANSFER_MEDIA_JAM - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Media: Retransfer media jam
MEDIA_RETRANSFER_MEDIA_MOTION_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Media: Retransfer media motion error
MediaInfo - Class in com.zebra.sdk.common.card.containers
Class for holding information about the printer's installed media.
MediaInfo() - Constructor for class com.zebra.sdk.common.card.containers.MediaInfo
Instantiates the MediaInfo class.
MediaType - Enum in com.zebra.sdk.common.card.enumerations
 
mediaVersion - Variable in class com.zebra.sdk.common.card.containers.LaminatorInfo
Media version.
mediaVersion - Variable in class com.zebra.sdk.common.card.containers.PrinterInfo
Media control board firmware version.
MEMORY_DATA_DELETE_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Memory: Data delete error
MEMORY_DATA_STORE_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Memory: Data store error
MEMORY_ERASE_EP_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Memory: Erase EP failure
MEMORY_ERASE_FPGA_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Memory: Erase FPGA failure
MEMORY_ERASE_IP_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Memory: Erase IP failure
MEMORY_FILE_ACCESS_PERMISSION_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Memory: File access permission error
MEMORY_FILE_DELETE_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Memory: File delete error
MEMORY_FILE_INVALID_PATH - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Memory: Invalid file path
MEMORY_FILE_READ_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Memory: File read error
MEMORY_FILE_WRITE_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Memory: File write error
MEMORY_FONT_DELETE_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Memory: Font delete error
MEMORY_FONT_STORE_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Memory: Font store error
MEMORY_MEM_POOL_ALLOC_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Memory: Pool allocation error
MEMORY_MEM_POOL_DEALLOC_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Memory: Pool de-allocation error
MEMORY_NVM_ACCESS_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Memory: NVM access error
MEMORY_NVM_BACKUP_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Memory: NVM backup error
MEMORY_NVM_CRC_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Memory: NVM CRC error
MEMORY_NVM_EP_COMM_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Memory: NVM EP communication error
MEMORY_NVM_ERASE_BACKUP_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Memory: NVM erase backup error
MEMORY_NVM_INIT_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Memory: NVM initialization error
MEMORY_NVM_OPEN_CLOSE_ERROR_ - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Memory: NVM open or close error
MEMORY_NVM_PROGRAM_BACKUP_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Memory: NVM program backup error
MEMORY_NVM_RESTORE_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Memory: NVM restore error
MEMORY_OUT_OF_EXT_FLASH - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Memory: Out of external flash
MEMORY_OUT_OF_INT_FLASH - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Memory: Out of internal flash
MEMORY_OUT_OF_NVM - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Memory: Out of NVM
MEMORY_OUT_OF_RAM - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Memory: Out of RAM
MEMORY_PROGRAM_EP_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Memory: Program EP failure
MEMORY_PROGRAM_FPGA_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Memory: Program FPGA error
MEMORY_PROGRAM_IP_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Memory: Program IP failure
MemoryInfo - Class in com.zebra.sdk.common.card.containers
Class for getting the printer's available memory.
For ZMotif and ZC Series printers only.
MemoryInfo() - Constructor for class com.zebra.sdk.common.card.containers.MemoryInfo
Instantiates the MemoryInfo class.
message - Variable in class com.zebra.sdk.common.card.containers.OCPLine
Line message to display.
MFG_PANEL_POWER_ADJ_CYAN - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Manufacturing cyan panel power adjustment.
MFG_PANEL_POWER_ADJ_HELPER - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Manufacturing helper panel power adjustment.
MFG_PANEL_POWER_ADJ_INHIBIT - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Manufacturing inhibit panel power adjustment.
MFG_PANEL_POWER_ADJ_KDYE - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Manufacturing k-dye panel power adjustment.
MFG_PANEL_POWER_ADJ_KRESIN_BACK - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Manufacturing k-resin panel power adjustment back.
MFG_PANEL_POWER_ADJ_KRESIN_FRONT - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Manufacturing k-resin panel power adjustment front.
MFG_PANEL_POWER_ADJ_MAGENTA - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Manufacturing magenta panel power adjustment.
MFG_PANEL_POWER_ADJ_OVERLAY - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Manufacturing overlay panel power adjustment.
MFG_PANEL_POWER_ADJ_UV_BACK - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Manufacturing uv panel power adjustment back.
MFG_PANEL_POWER_ADJ_UV_FRONT - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Manufacturing uv panel power adjustment front.
MFG_PANEL_POWER_ADJ_X_RESIN - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Manufacturing x-resin panel power adjustment.
MFG_PANEL_POWER_ADJ_YELLOW - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Manufacturing yellow panel power adjustment.
MFG_PRINT_SPEED_ADJUST - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Manufacturing print speed adjustment.
MIN_RETRIES - Static variable in class com.zebra.sdk.common.card.printer.discovery.NetworkDiscoveryConfiguration
 
MIN_TIMEOUT - Static variable in class com.zebra.sdk.common.card.printer.discovery.NetworkDiscoveryConfiguration
 
minimumValue - Variable in class com.zebra.sdk.common.card.containers.ParameterInfo
Minimum allowed value.
model - Variable in class com.zebra.sdk.common.card.containers.PrinterInfo
Printer's model.
MONOCHROME_BIAS - Static variable in class com.zebra.sdk.zxp.settings.ZebraCardSettingNamesZxp
Monochrome bias.
MonochromeConversion - Enum in com.zebra.sdk.common.card.graphics.enumerations
Specifies the type of monochrome conversion to apply to the image.
monochromeConversionType(MonochromeConversion) - Method in class com.zebra.sdk.common.card.graphics.ZebraCardGraphics
 
monochromeConversionType(MonochromeConversion) - Method in interface com.zebra.sdk.common.card.graphics.ZebraGraphicsI
Sets the monochrome conversion type to be used during ZebraGraphicsI.createImage().
MonoConversionType - Enum in com.zebra.sdk.common.card.enumerations
Specifies the monochrome conversion type.
For ZXP Series 1 and 3 printers only.
monoImage - Variable in class com.zebra.sdk.common.card.graphics.containers.ExtractedImages
Extracted monochrome image data (1bpp).
MONOX_SPEED_ADJUST - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
MONOX print speed adjustment.
MONOX_X_OFFSET - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
MONOX print x-offset.

N

NetworkCardDiscoverer - Class in com.zebra.sdk.common.card.printer.discovery
A class used to discover printers on an IP Network.

NetworkDiscoveryConfiguration - Class in com.zebra.sdk.common.card.printer.discovery
A class used to set/get the network card printer discovery parameters.
NetworkInfo - Class in com.zebra.sdk.common.card.containers
Class for getting and/or setting the printer's wired network configuration.
NetworkInfo() - Constructor for class com.zebra.sdk.common.card.containers.NetworkInfo
Instantiates the NetworkInfo class.
nextJobID - Variable in class com.zebra.sdk.common.card.containers.PrinterStatusInfo
Next job action ID.

O

OCP_LANGUAGE_NAME - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
OCP language name.
OCP_LANGUAGE_TYPE - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
OCP language type.
OCP_REPRINT - Static variable in class com.zebra.sdk.zmotif.job.ZebraCardJobSettingNamesZmotif
OCP reprint.
OCP_TRANSMIT_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
OCP: Transmit error
OCP_UNRESPONSIVE - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
OCP: Unresponsive
OCPDisplayInfo - Class in com.zebra.sdk.common.card.containers
Class for getting and/or setting the printer's OCP line data.
OCPDisplayInfo() - Constructor for class com.zebra.sdk.common.card.containers.OCPDisplayInfo
Instantiates the OCPDisplayInfo class.
OCPLanguage - Enum in com.zebra.sdk.common.card.enumerations
Specifies the OCP language.
OCPLine - Class in com.zebra.sdk.common.card.containers
Class for getting and/or setting the printer's OCP line data.
OCPLine() - Constructor for class com.zebra.sdk.common.card.containers.OCPLine
Instantiates the OCPLine class.
OCPSettings - Class in com.zebra.sdk.common.card.containers
Container for getting and/or setting the printer's OCP configuration.
OCPSettings() - Constructor for class com.zebra.sdk.common.card.containers.OCPSettings
Instantiates the OCPSettings class.
oemCode - Variable in class com.zebra.sdk.common.card.containers.MediaInfo
Media OEM code.
oemCode - Variable in class com.zebra.sdk.common.card.containers.PrinterInfo
Printer's OEM code.
opacity - Variable in class com.zebra.sdk.common.card.containers.GraphicsInfo
Opacity value - meaningful only with multiple bitmaps of the same PrintType.
open() - Method in interface com.zebra.sdk.comm.Connection
Opens the connection to a device.
open() - Method in class com.zebra.sdk.comm.ConnectionA
 
open() - Method in class com.zebra.sdk.comm.UsbConnection
 
optionsVersion - Variable in class com.zebra.sdk.common.card.containers.PrinterInfo
Options control board firmware version.
For ZTC Series printers only.
orientation - Variable in class com.zebra.sdk.common.card.containers.JobSideConfigInfo
Sets the orientation of the image.
ORIENTATION_BACK - Static variable in class com.zebra.sdk.zmotif.job.ZebraCardJobSettingNamesZmotif
Orientation back.
ORIENTATION_FRONT - Static variable in class com.zebra.sdk.zmotif.job.ZebraCardJobSettingNamesZmotif
Orientation front.
OrientationType - Enum in com.zebra.sdk.common.card.enumerations
Specifies the orientation of the image.
outputDouble - Variable in class com.zebra.sdk.common.card.containers.TransferSpeeds
Double-sided output speed offset.
outputDoubleUV - Variable in class com.zebra.sdk.common.card.containers.TransferSpeeds
Double-sided UV output speed offset.
outputSingle - Variable in class com.zebra.sdk.common.card.containers.TransferSpeeds
Single-sided output speed offset.
outputSingleUV - Variable in class com.zebra.sdk.common.card.containers.TransferSpeeds
Single-sided UV output speed offset.
OVERLAY_SPEED_ADJUST - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Overlay print speed adjustment.
OVERLAY_X_OFFSET - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Overlay print x-offset.
overprint - Variable in class com.zebra.sdk.common.card.containers.GraphicsInfo
Applies to UV PrintTypes only.

P

panelsRemaining - Variable in class com.zebra.sdk.common.card.containers.MediaInfo
Number of panels remaining.
PanelType - Enum in com.zebra.sdk.common.card.enumerations
Specifies a specific panel on the card ribbon.
ParameterInfo - Class in com.zebra.sdk.common.card.containers
Class for holding information about a setting's value and range.
ParameterInfo() - Constructor for class com.zebra.sdk.common.card.containers.ParameterInfo
Instantiates the ParameterInfo class.
partNumber - Variable in class com.zebra.sdk.common.card.containers.CardTypeInfo
Zebra part number for card.
partNumber - Variable in class com.zebra.sdk.common.card.containers.MediaInfo
Media part number.
PLATEN_TEMPERATURE_OFFSET - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Platen temperature offset.
portNames - Variable in class com.zebra.sdk.printer.discovery.DiscoveredPrinterDriver
Local ports registered with the printer.
positionCard() - Method in interface com.zebra.sdk.common.card.job.JobUtil
Moves a card from the specified source to the specified destination.
PREFEED_MODE - Static variable in class com.zebra.sdk.zxp.settings.ZebraCardSettingNamesZxp
Prefeed mode.
preheat - Variable in class com.zebra.sdk.common.card.containers.GraphicsInfo
Sets the amount of baseline energy used on the non-printed (white areas) of the card.
print(int, List<GraphicsInfo>) - Method in interface com.zebra.sdk.common.card.job.JobUtil
Prints a card with the images provided.
PRINT_OPTIMIZATION - Static variable in class com.zebra.sdk.common.card.jobSettings.ZebraCardJobSettingNames
Print optimization mode.
PRINT_TYPE - Static variable in class com.zebra.sdk.common.card.settings.ZebraCardSettingNames
Single- or double-sided printing.
printAndMagEncode(int, List<GraphicsInfo>, String, String, String) - Method in interface com.zebra.sdk.common.card.job.JobUtil
Encodes the magnetic encoding data and prints a card with the images provided.
PRINTER_SPEED - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Printer speed.
PrinterInfo - Class in com.zebra.sdk.common.card.containers
Class for holding information about a printer.
PrinterInfo() - Constructor for class com.zebra.sdk.common.card.containers.PrinterInfo
Instantiates the PrinterInfo class.
PrinterModel - Enum in com.zebra.sdk.common.card.graphics.enumerations
Specifies the printer model type used to determine the max width and max height of the drawing surface.
printerName - Variable in class com.zebra.sdk.printer.discovery.DiscoveredPrinterDriver
Local printer name associated with the driver.
printerOnline(ZebraCardPrinter, String) - Method in interface com.zebra.sdk.printer.CardPrinterReconnectionHandler
Called when the printer is back online and has been rediscovered.
PrinterStatusInfo - Class in com.zebra.sdk.common.card.containers
Class for getting the printer's current status information.
PrinterStatusInfo() - Constructor for class com.zebra.sdk.common.card.containers.PrinterStatusInfo
Instantiates the PrinterStatusInfo class.
PrinterType - Enum in com.zebra.sdk.common.card.enumerations
Specifies the card printer model type.
printerTypes - Variable in class com.zebra.sdk.common.card.containers.DiscoveryConfiguration
Printer types to discover.
PRINTHEAD_RESISTANCE - Static variable in class com.zebra.sdk.common.card.settings.ZebraCardSettingNames
Printhead resistance.
printheadSerialNumber - Variable in class com.zebra.sdk.common.card.containers.PrinterInfo
Printhead serial number.
PrintOptimizationMode - Enum in com.zebra.sdk.common.card.enumerations
Specifies the print optimization mode.
For ZXP3xC and ZMotif Series 9 printers only.
printStatus - Variable in class com.zebra.sdk.common.card.containers.JobStatus
Status of job.
printStatus - Variable in class com.zebra.sdk.common.card.containers.JobStatusInfo
Status of job.
Example values: parsed, receive_ok, in_progress, cleaning_up, done_ok, done_error, cancelled_by_user, cancelled_by_error
printTemplate(int, TemplateJob) - Method in interface com.zebra.sdk.common.card.job.JobUtil
Prints a card with the provided template.
printTestCard(byte, int, boolean) - Method in interface com.zebra.sdk.zmotif.job.JobUtilZmotif
Prints the specified test image.
For ZMotif Series 7, 8, and 9 printers only.
printTestCard(String) - Method in interface com.zebra.sdk.zmotif.job.JobUtilZmotif
Prints the specified test image.
For ZC Series printers only.
printType - Variable in class com.zebra.sdk.common.card.containers.GraphicsInfo
Type of graphics information (color, mono, etc.).
PrintType - Enum in com.zebra.sdk.common.card.enumerations
Specifies the type of print to be performed for the given image data.
privacy - Variable in class com.zebra.sdk.common.card.containers.WirelessAccessPointInfo
Privacy mode.
processSettingsViaMap(Map<String, String>) - Method in interface com.zebra.sdk.settings.SettingsProvider
Change or retrieve printer settings.
progressUpdate(String, int) - Method in interface com.zebra.sdk.printer.CardPrinterReconnectionHandler
Called for ZMotif Series 7, 8, and 9 printers during specific firmware module upgrades.

R

radioEnabled - Variable in class com.zebra.sdk.common.card.containers.WirelessNetworkInfo
Indicates if the printer's wireless radio is enabled (read-only).
ram - Variable in class com.zebra.sdk.common.card.containers.MemoryInfo
RAM available.
read() - Method in interface com.zebra.sdk.comm.Connection
Reads all the available data from the connection.
read(OutputStream) - Method in interface com.zebra.sdk.comm.Connection
Reads all the available data from the connection.
read() - Method in class com.zebra.sdk.comm.ConnectionA
 
read(int) - Method in class com.zebra.sdk.comm.ConnectionA
Reads maxBytesToRead of the available data from the connection.
read(OutputStream) - Method in class com.zebra.sdk.comm.ConnectionA
 
read(int, boolean) - Method in class com.zebra.sdk.comm.ConnectionA
Reads maxBytesToRead of the available data from the connection.
read(int) - Method in class com.zebra.sdk.comm.UsbConnection
Reads up to maxBytesToRead into byte array
Performing reads using DriverPrinterConnection and UsbConnection concurrently could cause indeterminate reads
readBarcodeData() - Method in interface com.zebra.sdk.zmotif.job.JobUtilZmotif
Sends a job to the printer to scan and return the barcode data from a card.
readChar() - Method in interface com.zebra.sdk.comm.Connection
Reads the next byte of data from the connection, similar to a Java InputStream.
readChar() - Method in class com.zebra.sdk.comm.ConnectionA
 
readChar() - Method in class com.zebra.sdk.comm.UsbConnection
 
readMagData(EnumSet<DataSource>) - Method in interface com.zebra.sdk.common.card.job.JobUtil
Reads the data from a magnetically-encoded card.
readMagData(EnumSet<DataSource>, boolean) - Method in interface com.zebra.sdk.common.card.job.JobUtil
Reads the data from a magnetically-encoded card.
readyForNextJob - Variable in class com.zebra.sdk.common.card.containers.JobStatusInfo
Indicates whether the printer is ready to accept another job.
For ZMotif and ZC Series printers only.
reestablishConnection(CardPrinterReconnectionHandler) - Method in interface com.zebra.sdk.comm.CardConnectionReestablisher
Reestablishes a connection to a printer that may have been closed due to an event, like a reboot.
registerAlarmHandler(AlarmHandler) - Method in interface com.zebra.sdk.common.card.device.DeviceUtil
Registers a callback routine for asynchronous reporting of printer alarm conditions.
reject() - Method in interface com.zebra.sdk.zmotif.job.JobUtilZmotif
Rejects a card from the printer's home position.
releaseDeviceReservation(int) - Method in interface com.zebra.sdk.zmotif.job.JobUtilZmotif
Releases the reservation session associated with the reservationToken.
reprint(int) - Method in interface com.zebra.sdk.common.card.job.JobUtil
Reprints the last rendered job.
ReservationInfo - Class in com.zebra.sdk.common.card.containers
Class for getting the printer's reservation information.
For ZMotif and ZC Series printers only.
ReservationInfo() - Constructor for class com.zebra.sdk.common.card.containers.ReservationInfo
Instantiates the ReservationInfo class.
reservationToken - Variable in class com.zebra.sdk.common.card.containers.ReservationInfo
Reservation token.
ReservationType - Enum in com.zebra.sdk.common.card.enumerations
Specifies the type of reservation to request.
reserveDevice(ReservationType) - Method in interface com.zebra.sdk.zmotif.job.JobUtilZmotif
Requests a reservation to a shared printer.
reset() - Method in interface com.zebra.sdk.common.card.device.DeviceUtil
Resets the printer.
resetNetwork() - Method in interface com.zebra.sdk.zmotif.device.DeviceUtilZmotif
Sends the network reset command to the printer.
ResponseValidator - Interface in com.zebra.sdk.comm
An interface defining a method to validate whether a response from the printer is complete.
restoreDefaultParameters() - Static method in class com.zebra.sdk.common.card.printer.discovery.NetworkDiscoveryConfiguration
Restores the network card printer discovery parameters to their default values.
restoreLaminatorDefaultConfiguration() - Method in interface com.zebra.sdk.zmotif.device.LaminatorUtilZmotif
Restores the laminator to default configuration.
resume() - Method in interface com.zebra.sdk.common.card.job.JobUtil
Resumes the processing of a held job, such as a smart card encoding job.
resumeFromStandby() - Method in interface com.zebra.sdk.zmotif.device.DeviceUtilZmotif
Resume from standby.
retries - Variable in class com.zebra.sdk.common.card.containers.DiscoveryConfiguration
Number of discovery retries to perform (0-20).
Retries - Variable in class com.zebra.sdk.common.card.printer.discovery.DiscoveryInfo
Number of broadcast attempts to perform.
retrySmartCard(SmartCardType) - Method in interface com.zebra.sdk.zmotif.job.JobUtilZmotif
Repositions a smart card that is already present at the encoder.
reverse - Variable in class com.zebra.sdk.common.card.containers.OCPLine
Indicates whether the message should be reversed.
For ZMotif Series 7, 8, and 9 printers only.
RIBBON_DESCRIPTION - Static variable in class com.zebra.sdk.common.card.settings.ZebraCardSettingNames
Ribbon description.
RIBBON_INITIAL_SIZE - Static variable in class com.zebra.sdk.common.card.settings.ZebraCardSettingNames
Ribbon initial size.
RIBBON_MOTOR_TAKEUP_K0 - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Ribbon motor takeup K0.
RIBBON_MOTOR_TAKEUP_KA - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Ribbon motor takeup KA.
RIBBON_MOTOR_TAKEUP_KB - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Ribbon motor takeup KB.
RIBBON_MOTOR_TAKEUP_M0 - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Ribbon motor takeup M0.
RIBBON_MOTOR_TAKEUP_MA - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Ribbon motor takeup MA.
RIBBON_MOTOR_TAKEUP_MB - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Ribbon motor takeup MB.
RIBBON_MOTOR_TAKEUP_S0 - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Ribbon motor takeup S0.
RIBBON_MOTOR_TAKEUP_VTOI - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Ribbon motor takeup VtoI.
RIBBON_OEM - Static variable in class com.zebra.sdk.common.card.settings.ZebraCardSettingNames
Ribbon OEM code.
RIBBON_PANELS_REMAINING - Static variable in class com.zebra.sdk.common.card.settings.ZebraCardSettingNames
Ribbon panels remaining.
RIBBON_SENSOR_OFFSET - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Ribbon sensor offset.
RIBBON_SYNCH_ENABLE - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Enable ribbon synchronization on power up and door closing.
For ZC Series printers only.
RIBBON_TENSION_H_PAYOUT_IDLE - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Ribbon Helper idle payout tension.
RIBBON_TENSION_H_TAKEUP_IDLE - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Ribbon Helper idle takeup tension.
RIBBON_TENSION_H_TAKEUP_POSTPRINT_EMPTY - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Ribbon empty Helper post-print takeup tension.
RIBBON_TENSION_H_TAKEUP_POSTPRINT_FULL - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Ribbon full Helper post-print takeup tension.
RIBBON_TENSION_H_TAKEUP_PREPRINT_EMPTY - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Ribbon empty Helper pre-print takeup tension.
RIBBON_TENSION_H_TAKEUP_PREPRINT_FULL - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Ribbon full Helper pre-print takeup tension.
RIBBON_TENSION_H_TAKEUP_PRINT_EMPTY - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Ribbon empty Helper print takeup tension.
RIBBON_TENSION_H_TAKEUP_PRINT_FULL - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Ribbon full Helper print takeup tension.
RIBBON_TENSION_I_PAYOUT_IDLE - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Ribbon Inhibit idle payout tension.
RIBBON_TENSION_I_TAKEUP_IDLE - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Ribbon Inhibit idle takeup tension.
RIBBON_TENSION_I_TAKEUP_POSTPRINT_EMPTY - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Ribbon empty Inhibit print takeup tension.
RIBBON_TENSION_I_TAKEUP_POSTPRINT_FULL - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Ribbon full Inhibit print takeup tension.
RIBBON_TENSION_I_TAKEUP_PREPRINT_EMPTY - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Ribbon empty Inhibit pre-print takeup tension.
RIBBON_TENSION_I_TAKEUP_PREPRINT_FULL - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Ribbon full Inhibit pre-print takeup tension.
RIBBON_TENSION_I_TAKEUP_PRINT_EMPTY - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Ribbon empty Inhibit print takeup tension.
RIBBON_TENSION_I_TAKEUP_PRINT_FULL - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Ribbon full Inhibit print takeup tension.
RIBBON_TENSION_K_PAYOUT_IDLE - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Ribbon Monochrome idle payout tension.
RIBBON_TENSION_K_TAKEUP_IDLE - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Ribbon Monochrome idle takeup tension.
RIBBON_TENSION_K_TAKEUP_POSTPRINT_EMPTY - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Ribbon empty Monochrome post-print takeup tension.
RIBBON_TENSION_K_TAKEUP_POSTPRINT_FULL - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Ribbon full Monochrome post-print takeup tension.
RIBBON_TENSION_K_TAKEUP_PREPRINT_EMPTY - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Ribbon empty Monochrome pre-print takeup tension.
RIBBON_TENSION_K_TAKEUP_PREPRINT_FULL - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Ribbon full Monochrome pre-print takeup tension.
RIBBON_TENSION_K_TAKEUP_PRINT_EMPTY - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Ribbon empty Monochrome print takeup tension.
RIBBON_TENSION_K_TAKEUP_PRINT_FULL - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Ribbon full Monochrome print takeup tension.
RIBBON_TENSION_O_PAYOUT_IDLE - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Ribbon Overlay idle payout tension.
RIBBON_TENSION_O_TAKEUP_IDLE - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Ribbon Overlay idle takeup tension.
RIBBON_TENSION_O_TAKEUP_POSTPRINT_EMPTY - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Ribbon empty Overlay post-print takeup tension.
RIBBON_TENSION_O_TAKEUP_POSTPRINT_FULL - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Ribbon full Overlay post-print takeup tension.
RIBBON_TENSION_O_TAKEUP_PREPRINT_EMPTY - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Ribbon empty Overlay pre-print takeup tension.
RIBBON_TENSION_O_TAKEUP_PREPRINT_FULL - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Ribbon full Overlay pre-print takeup tension.
RIBBON_TENSION_O_TAKEUP_PRINT_EMPTY - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Ribbon empty Overlay print takeup tension.
RIBBON_TENSION_O_TAKEUP_PRINT_FULL - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Ribbon full Overlay print takeup tension.
RIBBON_TENSION_UV_PAYOUT_IDLE - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Ribbon UV idle payout tension.
RIBBON_TENSION_UV_TAKEUP_IDLE - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Ribbon UV idle takeup tension.
RIBBON_TENSION_UV_TAKEUP_POSTPRINT_EMPTY - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Ribbon empty UV post-print takeup tension.
RIBBON_TENSION_UV_TAKEUP_POSTPRINT_FULL - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Ribbon full UV post-print takeup tension.
RIBBON_TENSION_UV_TAKEUP_PREPRINT_EMPTY - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Ribbon empty UV pre-print takeup tension.
RIBBON_TENSION_UV_TAKEUP_PREPRINT_FULL - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Ribbon full UV pre-print takeup tension.
RIBBON_TENSION_UV_TAKEUP_PRINT_EMPTY - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Ribbon empty UV print takeup tension.
RIBBON_TENSION_UV_TAKEUP_PRINT_FULL - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Ribbon full UV print takeup tension.
RIBBON_TENSION_YMC_PAYOUT_IDLE - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Ribbon YMC idle payout tension.
RIBBON_TENSION_YMC_TAKEUP_IDLE - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Ribbon YMC idle takeup tension.
RIBBON_TENSION_YMC_TAKEUP_POSTPRINT_EMPTY - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Ribbon empty YMC post-print takeup tension.
RIBBON_TENSION_YMC_TAKEUP_POSTPRINT_FULL - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Ribbon full YMC post-print takeup tension.
RIBBON_TENSION_YMC_TAKEUP_PREPRINT_EMPTY - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Ribbon empty YMC pre-print takeup tension.
RIBBON_TENSION_YMC_TAKEUP_PREPRINT_FULL - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Ribbon full YMC pre-print takeup tension.
RIBBON_TENSION_YMC_TAKEUP_PRINT_EMPTY - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Ribbon empty YMC print takeup tension.
RIBBON_TENSION_YMC_TAKEUP_PRINT_FULL - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Ribbon full YMC print takeup tension.
RIBBON_TYPE - Static variable in class com.zebra.sdk.common.card.settings.ZebraCardSettingNames
Ribbon type.
RibbonPanelType - Enum in com.zebra.sdk.common.card.enumerations
Specifies the specific ribbon panel to be used.
For ZXP Series 1 and 3 only.
rotateImage(byte[], RotationType) - Method in class com.zebra.sdk.common.card.graphics.ZebraCardGraphics
 
rotateImage(byte[], int, int, RotationType) - Method in class com.zebra.sdk.common.card.graphics.ZebraCardGraphics
 
rotateImage(byte[], RotationType) - Method in interface com.zebra.sdk.common.card.graphics.ZebraGraphicsI
Rotates the image.
rotateImage(byte[], int, int, RotationType) - Method in interface com.zebra.sdk.common.card.graphics.ZebraGraphicsI
Rotates the image and then resizes the image.
rotation - Variable in class com.zebra.sdk.common.card.containers.JobSideConfigInfo
Sets the rotation of the image.
Rotation - Enum in com.zebra.sdk.common.card.graphics.barcode.enumerations
Specifies the CW rotation of the barcode.
ROTATION_BACK - Static variable in class com.zebra.sdk.zmotif.job.ZebraCardJobSettingNamesZmotif
Rotation back.
ROTATION_FRONT - Static variable in class com.zebra.sdk.zmotif.job.ZebraCardJobSettingNamesZmotif
Rotation front.
RotationType - Enum in com.zebra.sdk.common.card.graphics.enumerations
Specifies the rotation of the image.

S

saveTemplate(String, String) - Method in interface com.zebra.sdk.common.card.job.template.ZebraTemplate
Saves the specified template.
saveTemplate(String, String) - Method in class com.zebra.sdk.common.card.template.ZebraCardTemplate
 
saveTemplateImage(String, byte[]) - Method in interface com.zebra.sdk.common.card.job.template.ZebraTemplate
Saves the specified template image.
saveTemplateImage(String, byte[]) - Method in class com.zebra.sdk.common.card.template.ZebraCardTemplate
 
scanWirelessAccessPoints(int) - Method in interface com.zebra.sdk.zmotif.device.DeviceUtilZmotif
Gets the Access points discoverable by printer.
scroll - Variable in class com.zebra.sdk.common.card.containers.OCPLine
Indicates whether the message should scroll across the OCP.
For ZXP Series printers only.
SDK_BARCODE_READER_NOT_AVAILABLE - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
SDK: Barcode reader is not available
SDK_BUFFER_OVERFLOW - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
SDK: Buffer overflow
SDK_DEVICE_ALREADY_OPEN - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
SDK: Device already open
SDK_DEVICE_IN_SESSION - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
SDK: Device in session with another host
SDK_DEVICE_NOT_AVAILABLE - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
SDK: Device not available
SDK_DEVICE_NOT_OPEN - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
SDK: Device not open
SDK_DEVICE_NOT_RESPONDING - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
SDK: Device not responding
SDK_DISCONNECT_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
SDK: Disconnect error
SDK_ENCRYPTION_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
SDK: Encryption error
SDK_INSUFFICIENT_DATA_RCVD - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
SDK: Insufficient data received from device
SDK_INVALID_ARGUMENT - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
SDK: Invalid argument
SDK_INVALID_CMD_ECHO - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
SDK: Bad ZMC command echo
SDK_INVALID_CMD_SIGNATURE - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
SDK: Invalid ZMC response signature
SDK_INVALID_DATA_STRUCTURE - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
SDK: Empty/Invalid Data structure
SDK_INVALID_DEVICE_TYPE - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
SDK: Invalid device for requested operation
SDK_INVALID_MEDIA - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
SDK: Invalid media for requested operation
SDK_INVALID_OPERATION - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
SDK: Requested operation not supported
SDK_INVALID_TRANSFER_TYPE - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
SDK: Dual sided printing not supported
SDK_JOB_STATUS_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
SDK: Job status error
SDK_MEMORY_ALLOC_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
SDK: Memory allocation error
SDK_MUTEX_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
SDK: Unable to obtain exclusive access to device
SDK_NO_DEVICES_FOUND - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
SDK: No devices found
SDK_OPERATION_TIMEOUT - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
SDK: Requested operation timed out
SDK_PASSPHRASE_OR_KEY_REQUIRED - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
SDK: Passphrase or security key required for requested operation
SDK_SMARTCARD_ENCODER_NOT_AVAILABLE - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
SDK: Smartcard encoder not available
SDK_UNEXPECTED_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
SDK: Unexpected error
SDK_WIFI_NOT_AVAILABLE - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
SDK: Wi-Fi not available
SDK_WRITE_DATA_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
SDK: Write data error
SDK_XML_ELEMENT_NOT_FOUND - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
SDK: Path to XML element not found
SDK_XML_PARSE_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
SDK: XML parse error
security - Variable in class com.zebra.sdk.common.card.containers.WirelessAccessPointInfo
Wireless security mode.
SECURITY_AUTHENTICATION_FAILED - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Security: Authentication failed
SECURITY_CRYPTO_CREATE_RANDOM_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Security: Create random error
SECURITY_CRYPTO_READ_RANDOM_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Security: Read random error
SECURITY_CRYPTO_READ_SERIAL_NUMBER_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Security: Read serial number error
SECURITY_INVALID_CRYPTO_KEY - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Security: Invalid crypto key
SECURITY_INVALID_HMAC - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Security: Invalid HMAC
SECURITY_INVALID_PASSKEY - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Security: Invalid passkey
SECURITY_INVALID_PRINTER_DATA - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Security: Invalid printer data
SECURITY_UNSUPPORTED_ACTION - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
Security: Unsupported action
securityType - Variable in class com.zebra.sdk.common.card.containers.WirelessNetworkInfo
Wireless security type (read-only).
selected - Variable in class com.zebra.sdk.common.card.containers.WirelessAccessPointInfo
Indicates whether this access point is currently selected.
sendAndWaitForResponse(byte[], int, int, String) - Method in interface com.zebra.sdk.comm.Connection
Sends dataToSend and returns the response data.
sendAndWaitForResponse(OutputStream, InputStream, int, int, String) - Method in interface com.zebra.sdk.comm.Connection
Sends data from sourceStream and writes the response data to destinationStream.
sendAndWaitForResponse(byte[], int, int, String) - Method in class com.zebra.sdk.comm.ConnectionA
 
sendAndWaitForResponse(OutputStream, InputStream, int, int, String) - Method in class com.zebra.sdk.comm.ConnectionA
 
sendAndWaitForValidResponse(byte[], int, int, ResponseValidator) - Method in interface com.zebra.sdk.comm.Connection
Sends dataToSend and returns the response data.
sendAndWaitForValidResponse(OutputStream, InputStream, int, int, ResponseValidator) - Method in interface com.zebra.sdk.comm.Connection
Sends data from sourceStream and writes the response data to destinationStream.
sendAndWaitForValidResponse(byte[], int, int, ResponseValidator) - Method in class com.zebra.sdk.comm.ConnectionA
 
sendAndWaitForValidResponse(OutputStream, InputStream, int, int, ResponseValidator) - Method in class com.zebra.sdk.comm.ConnectionA
 
sensorVersion - Variable in class com.zebra.sdk.common.card.containers.PrinterInfo
Sensor control board firmware version.
For ZTC and ZC Series printers only.
serialNumber - Variable in class com.zebra.sdk.comm.TcpConnection
For internal use of the Zebra Printer API only.
serialNumber - Variable in class com.zebra.sdk.common.card.containers.LaminatorInfo
Serial number.
serialNumber - Variable in class com.zebra.sdk.common.card.containers.PrinterInfo
Printer's serial number.
serialNumber - Variable in class com.zebra.sdk.common.card.containers.SmartCardInfo
The serial number of the smart card encoder.
sessionGranted - Variable in class com.zebra.sdk.common.card.containers.ReservationInfo
Indicates whether the requested reservation has been granted.
setAccess(String) - Method in class com.zebra.sdk.settings.Setting
Set the access permissions for this setting.
setActiveLUTTable(CalibrationTable) - Method in interface com.zebra.sdk.zmotif.settings.SettingsHelperUtilZmotif
Sets the printer's active LUT Table.
For ZMotif Series 7, 8, and 9 printers only.
setArchive(boolean) - Method in class com.zebra.sdk.settings.Setting
Set to true if this setting should be applied when loading a backup.
setATMMode(ATMMode) - Method in interface com.zebra.sdk.zxp.settings.SettingsHelperUtilZxp
Sets the ATM card feed mode.
setBarHeight(double) - Method in interface com.zebra.sdk.common.card.graphics.barcode.BarcodeUtil
Sets the height of the bars.
setBaselinePosition(BaselinePosition) - Method in interface com.zebra.sdk.common.card.graphics.barcode.CodePostnetUtil
Sets the baseline position that indicates whether the bars are top-align or bottom-aligned.
setBrightnessLevel(int) - Method in class com.zebra.sdk.common.card.graphics.ZebraCardGraphics
 
setBrightnessLevel(int) - Method in interface com.zebra.sdk.common.card.graphics.ZebraGraphicsI
Sets the brightness correction level to be applied during ZebraGraphicsI.createImage().
setCardDestination(CardDestination) - Method in interface com.zebra.sdk.zmotif.job.JobControlHelperUtilZmotif
Sets the card destination for the current job.
setCardDestination(CardDestination) - Method in interface com.zebra.sdk.zxp.job.JobControlHelperUtilZxp
Sets the card destination location for the current job.
setCardPrefeed(boolean) - Method in interface com.zebra.sdk.zxp.settings.SettingsHelperUtilZxp
Sets the card pre-feed enabled state.
setCardSource(CardSource) - Method in interface com.zebra.sdk.zmotif.job.JobControlHelperUtilZmotif
Sets the card source for the current job.
setCardSource(CardSource) - Method in interface com.zebra.sdk.zxp.job.JobControlHelperUtilZxp
Sets the card source location for the current job.
setCardThickness(int) - Method in interface com.zebra.sdk.zmotif.job.JobControlHelperUtilZmotif
Sets the thickness of the card to be used.
setCardType(String) - Method in interface com.zebra.sdk.zmotif.job.JobControlHelperUtilZmotif
Sets the card type to be used for the job.
setCharacterSet(Code128CharacterSet) - Method in interface com.zebra.sdk.common.card.graphics.barcode.Code128Util
Sets the codesets to use.
setCheckDigitMarker(char) - Method in interface com.zebra.sdk.common.card.graphics.barcode.CodeEAN128Util
Sets the character that will be used as the check digit marker.
setChecksumMode(ChecksumMode) - Method in interface com.zebra.sdk.common.card.graphics.barcode.Code39Util
Sets the checksum mode.
setChecksumMode(ChecksumMode) - Method in interface com.zebra.sdk.common.card.graphics.barcode.CodeCodabarUtil
Sets the checksum mode.
setChecksumMode(ChecksumMode) - Method in interface com.zebra.sdk.common.card.graphics.barcode.CodeEANUtil
Sets the checksum mode.
setChecksumMode(ChecksumMode) - Method in interface com.zebra.sdk.common.card.graphics.barcode.CodeInterleaved2Of5Util
Sets the checksum mode.
setChecksumMode(ChecksumMode) - Method in interface com.zebra.sdk.common.card.graphics.barcode.CodePostnetUtil
Sets the checksum mode.
setCleaningInterval(CleaningPath, int) - Method in interface com.zebra.sdk.zmotif.settings.SettingsHelperUtilZmotif
Sets the specified cleaning path interval.
setCleanWarningThreshold(int) - Method in interface com.zebra.sdk.zmotif.settings.SettingsHelperUtilZmotif
Sets the printer's cleaning warning threshold.
setClone(boolean) - Method in class com.zebra.sdk.settings.Setting
Set to true if this setting should be applied when loading a profile.
setColorPreheatLevel(int) - Method in interface com.zebra.sdk.zmotif.job.JobControlHelperUtilZmotif
Sets the color preheat level.
setColorScale(int, int, int) - Method in class com.zebra.sdk.common.card.graphics.ZebraCardGraphics
 
setColorScale(int, int, int) - Method in interface com.zebra.sdk.common.card.graphics.ZebraGraphicsI
Sets the color scale correction values for red, green, and blue pixel values during ZebraGraphicsI.createImage().
setColumns(int) - Method in interface com.zebra.sdk.common.card.graphics.barcode.CodePDF417Util
Sets the number of data columns for the barcode.
setConfiguration(String) - Method in interface com.zebra.sdk.zmotif.settings.SettingsHelperUtilZmotif
Sets specified values for settings with an XML format.
setConnection(Connection) - Method in interface com.zebra.sdk.common.card.printer.ZebraCardPrinter
Sets the printer connection.
setContactlessSmartCardOffset(String, int) - Method in interface com.zebra.sdk.zmotif.settings.SettingsHelperUtilZmotif
Sets the contactless smart card encoding position offset value.
setContrastLevel(int) - Method in class com.zebra.sdk.common.card.graphics.ZebraCardGraphics
 
setContrastLevel(int) - Method in interface com.zebra.sdk.common.card.graphics.ZebraGraphicsI
Sets the contrast correction level to be applied during ZebraGraphicsI.createImage().
setCustomCardConfiguration(CardTypeInfo) - Method in interface com.zebra.sdk.zmotif.settings.SettingsHelperUtilZmotif
Sets the specified card type information.
setDataSource(EnumSet<DataSource>) - Method in interface com.zebra.sdk.zmotif.job.JobControlHelperUtilZmotif
Sets the data source(s) to be used during a read job.
setDataSource(EnumSet<DataSource>) - Method in interface com.zebra.sdk.zxp.job.JobControlHelperUtilZxp
Sets the data source for the specified magnetic read operation for the current job.
setDeleteAfter(boolean) - Method in interface com.zebra.sdk.zmotif.job.JobControlHelperUtilZmotif
Sets the flag indicating whether image data should be deleted following the current job completion.
setDeleteAfter(boolean) - Method in interface com.zebra.sdk.zxp.job.JobControlHelperUtilZxp
Sets whether to delete the current job after successfully completing.
setDiscoveryConfiguration(DiscoveryConfiguration) - Static method in class com.zebra.sdk.common.card.printer.discovery.NetworkCardDiscoverer
Sets the network discovery configuration parameters.
setDisplayChecksum(boolean) - Method in interface com.zebra.sdk.common.card.graphics.barcode.Code39Util
Enables or disables the use of the checksum in the human-readable message.
setDisplayChecksum(boolean) - Method in interface com.zebra.sdk.common.card.graphics.barcode.CodeInterleaved2Of5Util
Enables or disables the use of the checksum in the human-readable message.
setDisplayChecksum(boolean) - Method in interface com.zebra.sdk.common.card.graphics.barcode.CodePostnetUtil
Enables or disables the use of the checksum in the human-readable message.
setDisplayStartStop(boolean) - Method in interface com.zebra.sdk.common.card.graphics.barcode.CodeCodabarUtil
Enables or disables the use of the start and stop characters in the human-readable message.
setDisplayStartStopChars(boolean) - Method in interface com.zebra.sdk.common.card.graphics.barcode.Code39Util
Enables or disables the use of the start and stop characters in the human-readable message.
setECIEnabled(boolean) - Method in interface com.zebra.sdk.common.card.graphics.barcode.CodePDF417Util
Controls whether ECI sequences are generated for the output encoding.
setEnableOCPReprint(boolean) - Method in interface com.zebra.sdk.zmotif.job.JobControlHelperUtilZmotif
Sets whether or not the OCP Reprint button will be enabled.
setEncoding(String) - Method in interface com.zebra.sdk.common.card.graphics.barcode.CodePDF417Util
Sets the message encoding.
setEncoding(String) - Method in interface com.zebra.sdk.common.card.graphics.barcode.CodeQRUtil
Sets the message encoding.
setEncryptionKey(byte[]) - Method in interface com.zebra.sdk.zmotif.job.JobControlHelperUtilZmotif
Sets the 16-byte encryption used to encrypt job data between the printer and host.
Encryption option must be pre-configured on the printer.
setEndCardOffset(int) - Method in interface com.zebra.sdk.zxp.settings.SettingsHelperUtilZxp
Sets the printer's end of print value.
setErrorControlLevel(ErrorControlLevel) - Method in interface com.zebra.sdk.zmotif.settings.SettingsHelperUtilZmotif
Sets the error control level.
setErrorCorrectionLevel(int) - Method in interface com.zebra.sdk.common.card.graphics.barcode.CodePDF417Util
Sets the error correction level for the barcode.
setErrorCorrectionLevel(ErrorCorrectionLevel) - Method in interface com.zebra.sdk.common.card.graphics.barcode.CodeQRUtil
Sets the error correction level.
setFont(Font) - Method in interface com.zebra.sdk.common.card.graphics.barcode.BarcodeUtil
Sets the font of the human-readable portion.
setFont(Font) - Method in class com.zebra.sdk.common.card.graphics.ZebraCardGraphics
 
setFont(Font) - Method in interface com.zebra.sdk.common.card.graphics.ZebraGraphics
Sets the font type to be used during drawText operations.
setGammaLevel(int) - Method in class com.zebra.sdk.common.card.graphics.ZebraCardGraphics
 
setGammaLevel(int) - Method in interface com.zebra.sdk.common.card.graphics.ZebraGraphicsI
Sets the gamma correction level to be applied during ZebraGraphicsI.createImage().
setGraphics(ZebraGraphicsI) - Method in interface com.zebra.sdk.common.card.job.JobUtil
Sets the zebraCardGraphics object.
setGroupSeparator(char) - Method in interface com.zebra.sdk.common.card.graphics.barcode.CodeEAN128Util
Sets the group separator character.
setHeadResistance(int) - Method in interface com.zebra.sdk.zmotif.settings.SettingsHelperUtilZmotif
Sets the head resistance.
setHeight(double) - Method in interface com.zebra.sdk.common.card.graphics.barcode.BarcodeUtil
Sets the full height of the barcode including the human-readable portion.
setHostAuthenticationKey(byte[]) - Method in interface com.zebra.sdk.zmotif.job.JobControlHelperUtilZmotif
Sets the 16-byte host authentication key used when sending a job to the printer.
Host authentication option must be pre-configured on the printer.
setImageOrientation(CardSide, OrientationType) - Method in interface com.zebra.sdk.zmotif.job.JobControlHelperUtilZmotif
Sets the image orientation for the specified card side for the current job.
setImageRotation(CardSide, ImageRotation) - Method in interface com.zebra.sdk.zmotif.job.JobControlHelperUtilZmotif
Sets the image rotation type for the specified card side for the current job.
setImageSharpening(CardSide, SharpeningLevel) - Method in interface com.zebra.sdk.zmotif.job.JobControlHelperUtilZmotif
Sets the image sharpening level to be used on the specified card side.
setIntercharacterGapWidth(double) - Method in interface com.zebra.sdk.common.card.graphics.barcode.Code39Util
Sets the width between the characters to encode.
setIntercharGapWidth(double) - Method in interface com.zebra.sdk.common.card.graphics.barcode.CodePostnetUtil
Sets the width between encoded characters.
setJobConfiguration(JobConfigInfo) - Method in interface com.zebra.sdk.zmotif.job.JobControlHelperUtilZmotif
Method for configuring the current print job.
setJobConfiguration(JobConfigInfo) - Method in interface com.zebra.sdk.zxp.job.JobControlHelperUtilZxp
Sets print job settings for the current print job.
setJobSetting(String, String) - Method in interface com.zebra.sdk.common.card.job.JobControlProvider
Sets the printer's setting to the given value.
setJobSettings(Map<String, String>) - Method in interface com.zebra.sdk.common.card.job.JobControlProvider
Sets a set of the printer's settings to their given values.
setKPanelOptimization(CardSide, KOptimizationType) - Method in interface com.zebra.sdk.zmotif.job.JobControlHelperUtilZmotif
Sets the monochrome optimization mode for the specified card side.
setKPanelOverwrite(CardSide, boolean) - Method in interface com.zebra.sdk.zmotif.job.JobControlHelperUtilZmotif
Sets a flag indicating whether the monochrome panel overwrite should be performed for the specified card side.
setKPreheatLevel(CardSide, int) - Method in interface com.zebra.sdk.zmotif.job.JobControlHelperUtilZmotif
Sets the monochrome preheat level for the specified card side.
setLaminatorOffset(LaminatorOffsetType, int) - Method in interface com.zebra.sdk.zmotif.settings.SettingsHelperUtilZmotif
Sets the printer's laminator offset value.
setMagBitsPerCharacter(Map<TrackNumber, Integer>) - Method in interface com.zebra.sdk.zmotif.job.JobControlHelperUtilZmotif
Sets the bits per character for each track.
setMagCoercivity(CoercivityType) - Method in interface com.zebra.sdk.zmotif.job.JobControlHelperUtilZmotif
Sets the magnetic encoding coercivity type for the current job.
setMagCoercivity(CoercivityType) - Method in interface com.zebra.sdk.zxp.job.JobControlHelperUtilZxp
Sets the coercivity type for magnetic encoding.
setMagConfiguration(MagConfigInfo) - Method in interface com.zebra.sdk.zmotif.job.JobControlHelperUtilZmotif
Method for configuring settings for a magnetic encoding job.
setMagDataFormat(Map<TrackNumber, DataFormat>) - Method in interface com.zebra.sdk.zmotif.job.JobControlHelperUtilZmotif
Sets the magnetic encoding data format for each track contained in the supplied Map.
setMagDataParity(Map<TrackNumber, DataCharParity>) - Method in interface com.zebra.sdk.zmotif.job.JobControlHelperUtilZmotif
Sets the data character parity for each track for the current job.
setMagEncodeSide(CardSide) - Method in interface com.zebra.sdk.zmotif.job.JobControlHelperUtilZmotif
Sets the card side to be magnetic encoded.
setMagEncodingType(MagEncodingType) - Method in interface com.zebra.sdk.zmotif.job.JobControlHelperUtilZmotif
Sets the type of magnetic encoding to perform for the current job.
setMagEncodingType(Map<TrackNumber, MagEncodingType>) - Method in interface com.zebra.sdk.zmotif.job.JobControlHelperUtilZmotif
Sets the magnetic encoding type for each track contained in the specified Map object.
setMagEncodingType(MagEncodingType) - Method in interface com.zebra.sdk.zxp.job.JobControlHelperUtilZxp
Sets the type of magnetic encoding to perform.
setMagneticEncoderOffsets(MagneticEncoderOffsetInfo) - Method in interface com.zebra.sdk.zmotif.settings.SettingsHelperUtilZmotif
Sets magnetic encoder offsets.
setMagSentinelFormat(Map<TrackNumber, MagSentinel>) - Method in interface com.zebra.sdk.zmotif.job.JobControlHelperUtilZmotif
Sets the sentinel formats for each supplied track for the current job.
setMagTrackDensity(Map<TrackNumber, Integer>) - Method in interface com.zebra.sdk.zmotif.job.JobControlHelperUtilZmotif
Sets the density value for each supplied track number for the current job.
setMagVerification(boolean) - Method in interface com.zebra.sdk.zmotif.job.JobControlHelperUtilZmotif
Sets whether magnetic encoding write verification should be performed for the current job.
setMagVerification(boolean) - Method in interface com.zebra.sdk.zxp.job.JobControlHelperUtilZxp
Set whether to verify the magnetic encoding on the current job.
setMaxDataToWrite(int) - Method in class com.zebra.sdk.comm.ConnectionA
Sets the maximum number of bytes to write at one time
setMaximumColumns(int) - Method in interface com.zebra.sdk.common.card.graphics.barcode.CodePDF417Util
Sets the maximum number of columns.
setMaximumRows(int) - Method in interface com.zebra.sdk.common.card.graphics.barcode.CodePDF417Util
Sets the maximum number of rows.
setMaximumSize(Dimension) - Method in interface com.zebra.sdk.common.card.graphics.barcode.CodeDataMatrixUtil
Sets the maximum symbol size that is to be produced.
setMaximumSize(Dimension) - Method in interface com.zebra.sdk.common.card.graphics.barcode.CodeQRUtil
Sets the maximum symbol size that is to be produced.
setMaxTimeoutForRead(int) - Method in interface com.zebra.sdk.comm.Connection
Set the maximum time, in milliseconds, to wait for any data to be received
setMaxTimeoutForRead(int) - Method in class com.zebra.sdk.comm.ConnectionA
 
setMaxTimeoutForRead(int) - Method in class com.zebra.sdk.comm.UsbConnection
 
setMessagePosition(HumanReadablePlacement) - Method in interface com.zebra.sdk.common.card.graphics.barcode.BarcodeUtil
Sets the placement of the human-readable part.
setMinimumColumns(int) - Method in interface com.zebra.sdk.common.card.graphics.barcode.CodePDF417Util
Sets the minimum number of columns.
setMinimumRows(int) - Method in interface com.zebra.sdk.common.card.graphics.barcode.CodePDF417Util
Sets the minimum of rows.
setMinimumSize(Dimension) - Method in interface com.zebra.sdk.common.card.graphics.barcode.CodeDataMatrixUtil
Sets the minimum symbol size that is to be produced.
setMinimumSize(Dimension) - Method in interface com.zebra.sdk.common.card.graphics.barcode.CodeQRUtil
Sets the minimum symbol size that is to be produced.
setModuleWidth(double) - Method in interface com.zebra.sdk.common.card.graphics.barcode.BarcodeUtil
Sets the width of the narrow module.
setMonochromeBias(int) - Method in interface com.zebra.sdk.zxp.settings.SettingsHelperUtilZxp
Sets the monochrome bias value.
setMonochromeConversion(CardSide, MonoConversionType) - Method in interface com.zebra.sdk.zxp.job.JobControlHelperUtilZxp
Sets the monochrome conversion operation to perform for the specified card side.
setNetworkParameters(NetworkInfo) - Method in interface com.zebra.sdk.zmotif.settings.SettingsHelperUtilZmotif
Sets the printer's network information.
setOCPDisplay(OCPDisplayInfo) - Method in interface com.zebra.sdk.common.card.device.DeviceUtil
Displays the specified line data on the printer's OCP.
For ZXP Series 1 and 3 and ZMotif Series 7, 8, and 9 printers only.
setOCPParameters(OCPSettings) - Method in interface com.zebra.sdk.zmotif.settings.SettingsHelperUtilZmotif
Sets the printer's OCP configuration.
For ZMotif Series 7, 8, and 9 printers only.
setOmitBrackets(boolean) - Method in interface com.zebra.sdk.common.card.graphics.barcode.CodeEAN128Util
Indicates whether brackets should be used in the human-readable part around the AIs.
setPanelPowerLevel(PanelType, byte) - Method in interface com.zebra.sdk.zmotif.settings.SettingsHelperUtilZmotif
Sets the specified panel power level.
setParameters(DiscoveryConfiguration) - Static method in class com.zebra.sdk.common.card.printer.discovery.NetworkDiscoveryConfiguration
Sets the network discovery configuration parameters.
setPattern(String) - Method in interface com.zebra.sdk.common.card.graphics.barcode.BarcodeUtil
Sets the pattern to be applied over the human readable message.
setPrinterModel(PrinterModel) - Method in class com.zebra.sdk.common.card.graphics.ZebraCardGraphics
 
setPrinterModel(PrinterModel) - Method in interface com.zebra.sdk.common.card.graphics.ZebraGraphicsI
Sets the printer model.
setPrintOptimizationMode(PrintOptimizationMode) - Method in interface com.zebra.sdk.zmotif.job.JobControlHelperUtilZmotif
Sets the print optimization mode.
setPrintOptimizationMode(PrintOptimizationMode) - Method in interface com.zebra.sdk.zxp.job.JobControlHelperUtilZxp
Sets the print optimization mode.
setQuietZoneWidth(double) - Method in interface com.zebra.sdk.common.card.graphics.barcode.BarcodeUtil
Sets the width of the quiet zone.
setRange(String) - Method in class com.zebra.sdk.settings.Setting
Takes a string that describes the acceptable range of values for this setting.
setReadTimeout(int) - Method in class com.zebra.sdk.comm.ConnectionA
Sets the underlying socket read timeout value
setRenderingHints(RenderingHints) - Method in class com.zebra.sdk.common.card.graphics.ZebraCardGraphics
 
setRenderingHints(RenderingHints) - Method in interface com.zebra.sdk.common.card.graphics.ZebraGraphics
Adds to the RenderingHints to be used during draw operations.
setRibbonPanelIntensity(CardSide, RibbonPanelType, int) - Method in interface com.zebra.sdk.zxp.job.JobControlHelperUtilZxp
Sets the specified ribbon panel's intensity value.
setRowHeight(double) - Method in interface com.zebra.sdk.common.card.graphics.barcode.CodePDF417Util
Sets the height of the rows.
setSaturationLevel(int) - Method in class com.zebra.sdk.common.card.graphics.ZebraCardGraphics
 
setSaturationLevel(int) - Method in interface com.zebra.sdk.common.card.graphics.ZebraGraphicsI
Sets the saturation correction level to be applied during ZebraGraphicsI.createImage().
setSetting(String, String) - Method in interface com.zebra.sdk.settings.SettingsProvider
Sets the setting to the given value.
setSettings(Map<String, String>) - Method in interface com.zebra.sdk.settings.SettingsProvider
Set more than one setting.
setShape(SymbolShape) - Method in interface com.zebra.sdk.common.card.graphics.barcode.CodeDataMatrixUtil
Sets the requested shape for the generated barcode.
setShortBarHeight(double) - Method in interface com.zebra.sdk.common.card.graphics.barcode.CodePostnetUtil
Sets the height of a short bar.
setSmartCardConfiguration(List<SmartCardType>) - Method in interface com.zebra.sdk.zmotif.job.JobControlHelperUtilZmotif
setSmartCardConfiguration(List<SmartCardType>) - Method in interface com.zebra.sdk.zxp.job.JobControlHelperUtilZxp
Configures smart card encoding for the current job.
setSmartCardConfigurations(List<String>) - Method in interface com.zebra.sdk.zmotif.job.JobControlHelperUtilZmotif
Configures smart card encoding for the current job.
setSmartCardOffset(int) - Method in interface com.zebra.sdk.zmotif.settings.SettingsHelperUtilZmotif
Sets the contact smart card encoding position offset value.
setStandbyTimeout(Timeout) - Method in interface com.zebra.sdk.zmotif.settings.SettingsHelperUtilZmotif
Sets the printer's standby timeout.
setTemplate(String) - Method in interface com.zebra.sdk.common.card.graphics.barcode.CodeEAN128Util
Sets the message template with the fields for the EAN message.
The format of the templates here is a repeating set of AI number (in brackets) followed by a field description.
setTemplateFileDirectory(String) - Method in interface com.zebra.sdk.common.card.job.template.ZebraTemplate
Sets the directory location for retrieving/storing template files.
setTemplateFileDirectory(String) - Method in class com.zebra.sdk.common.card.template.ZebraCardTemplate
 
setTemplateImageFileDirectory(String) - Method in interface com.zebra.sdk.common.card.job.template.ZebraTemplate
Sets the directory location for retrieving/storing template image files.
setTemplateImageFileDirectory(String) - Method in class com.zebra.sdk.common.card.template.ZebraCardTemplate
 
setTimeToWaitForMoreData(int) - Method in interface com.zebra.sdk.comm.Connection
Set the maximum time, in milliseconds, to wait in-between reads after the initial read.
setTimeToWaitForMoreData(int) - Method in class com.zebra.sdk.comm.ConnectionA
 
Setting - Class in com.zebra.sdk.settings
A class that represents an internal device setting.
Setting() - Constructor for class com.zebra.sdk.settings.Setting
Instantiates the Setting class
SettingsException - Exception in com.zebra.sdk.settings
Signals that an error occurred retrieving a setting
SettingsException() - Constructor for exception com.zebra.sdk.settings.SettingsException
Constructs a SettingsException with Setting not found as the detailed error message.
SettingsException(String) - Constructor for exception com.zebra.sdk.settings.SettingsException
Constructs a SettingsException with message as the detailed error message.
SettingsException(Throwable) - Constructor for exception com.zebra.sdk.settings.SettingsException
Constructs a SettingsException with cause as the source of the exception.
SettingsException(String, Throwable) - Constructor for exception com.zebra.sdk.settings.SettingsException
Constructs a SettingsException with the message as the detailed error message and cause as the source of the exception.
settingsHelper() - Method in interface com.zebra.sdk.common.card.printer.ZebraPrinterZmotif
Returns the SettingsHelperUtilZmotif object.
settingsHelper() - Method in interface com.zebra.sdk.common.card.printer.ZebraPrinterZxp
Returns the SettingsHelperUtilZxp object.
SettingsHelperUtilZmotif - Interface in com.zebra.sdk.zmotif.settings
Provides device settings convenience methods for ZMotif Series printers.
SettingsHelperUtilZxp - Interface in com.zebra.sdk.zxp.settings
Provides device settings convenience methods for ZXP Series printers.
SettingsProvider - Interface in com.zebra.sdk.settings
Interface implemented by devices that provide settings.
setTransferTemperatureOffset(TransferTemperatureType, int) - Method in interface com.zebra.sdk.zmotif.settings.SettingsHelperUtilZmotif
Sets the transfer temperature offset for the specified transfer sensor.
For ZMotif Series re-transfer printers only.
setType(String) - Method in class com.zebra.sdk.settings.Setting
Set the setting's data type.
setValue(String) - Method in class com.zebra.sdk.settings.Setting
Set the setting's value.
setVerticalQuietZone(double) - Method in interface com.zebra.sdk.common.card.graphics.barcode.BarcodeUtil
Sets the height of the vertical quiet zone.
setWideFactor(double) - Method in interface com.zebra.sdk.common.card.graphics.barcode.Code39Util
Sets the factor by which wide bars are broader than narrow bars.
setWideFactor(double) - Method in interface com.zebra.sdk.common.card.graphics.barcode.CodeCodabarUtil
Sets the factor by which wide bars are broader than narrow bars.
setWideFactor(double) - Method in interface com.zebra.sdk.common.card.graphics.barcode.CodeInterleaved2Of5Util
Sets the factor by which wide bars are broader than narrow bars.
setWidthToHeightRatio(double) - Method in interface com.zebra.sdk.common.card.graphics.barcode.CodePDF417Util
Sets the ratio of the barcode width to the height.
setWirelessParameters(WirelessNetworkInfo) - Method in interface com.zebra.sdk.zmotif.settings.SettingsHelperUtilZmotif
Sets the wireless network information.
setXOffset(CardSide, int) - Method in interface com.zebra.sdk.zxp.settings.SettingsHelperUtilZxp
Sets the X offset for the specified card side.
setYOffset(CardSide, int) - Method in interface com.zebra.sdk.zxp.settings.SettingsHelperUtilZxp
Sets the y-offset for the specified card side.
SHARPENING_BACK - Static variable in class com.zebra.sdk.zmotif.job.ZebraCardJobSettingNamesZmotif
Sharpening back.
SHARPENING_FRONT - Static variable in class com.zebra.sdk.zmotif.job.ZebraCardJobSettingNamesZmotif
Sharpening front.
SharpeningLevel - Enum in com.zebra.sdk.common.card.enumerations
Specifies the level of sharpening to apply to the image data.
sharpness - Variable in class com.zebra.sdk.common.card.containers.JobSideConfigInfo
Sets the sharpness level of the image.
shouldAddPrinter(DiscoveredPrinter) - Method in class com.zebra.sdk.common.card.printer.discovery.ZebraCardPrinterFilter
Determines if the discoveredPrinter is a supported Zebra Card Printer.
shouldAddPrinter(DiscoveredPrinter) - Method in interface com.zebra.sdk.printer.discovery.DiscoveredPrinterFilter
Method called by a discovery operation to determine whether or not the DiscoveredPrinter should be added to the list of discovered devices.
shouldAddPrinter(DiscoveredPrinter) - Method in class com.zebra.sdk.printer.discovery.ZebraPrinterFilter
Determines if the discoveredPrinter is a supported Zebra Printer.
side - Variable in class com.zebra.sdk.common.card.containers.GraphicsInfo
Card side to print on.
side - Variable in class com.zebra.sdk.common.card.containers.MagConfigInfo
Card side to magnetic encode (back or front).
signalStrength - Variable in class com.zebra.sdk.common.card.containers.WirelessAccessPointInfo
Wireless signal strength.
SMART_CARD_CONTACT - Static variable in class com.zebra.sdk.common.card.jobSettings.ZebraCardJobSettingNames
Smart card front contact encode job.
SMART_CARD_CONTACTLESS - Static variable in class com.zebra.sdk.common.card.jobSettings.ZebraCardJobSettingNames
Smart card front contactless encode job.
SMARTCARD_HF_X_OFFSET - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Smart card HF encoder x-offset.
For ZC Series printers only.
SMARTCARD_LF_X_OFFSET - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Smart card LF encoder x-offset.
For ZC Series printers only.
SMARTCARD_MIFARE_X_OFFSET - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Smart card LF encoder x-offset.
For ZMotif Series 7, 8, and 9 printers only.
SMARTCARD_UHF_X_OFFSET - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Smart card UHF encoder x-offset.
For ZC Series printers only.
SMARTCARD_X_OFFSET - Static variable in class com.zebra.sdk.common.card.settings.ZebraCardSettingNames
Smart card encoder x-offset.
smartCardEncode(int) - Method in interface com.zebra.sdk.common.card.job.JobUtil
Positions a card at the smart card station, suspends the job to allow the card to be read or encoded, and waits for JobUtil.resume() to be called before completing the job.
SmartCardEncoderType - Enum in com.zebra.sdk.common.card.enumerations
Identifies the type of smart card encoder.
SmartCardInfo - Class in com.zebra.sdk.common.card.containers
Class for holding the printer's smart card configuration information.
SmartCardInfo() - Constructor for class com.zebra.sdk.common.card.containers.SmartCardInfo
Instantiates the SmartCardInfo class.
SmartCardType - Enum in com.zebra.sdk.common.card.enumerations
Specifies the type of smart card.
snmpEnabled - Variable in class com.zebra.sdk.common.card.containers.NetworkInfo
Returns true if SNMP is enabled.
snmpEnabled - Variable in class com.zebra.sdk.common.card.containers.WirelessNetworkInfo
Indicates whether SNMP is enabled (read-only).
speed - Variable in class com.zebra.sdk.common.card.containers.LaminatorAdjustments
Lamination speed.
ssid - Variable in class com.zebra.sdk.common.card.containers.WirelessAccessPointInfo
Wireless SSID.
ssid - Variable in class com.zebra.sdk.common.card.containers.WirelessNetworkInfo
SSID (read-only).
STACKER_COMMUNICATION_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
STACKER: Communication error
STACKER_DECK_FULL - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
STACKER: Deck full
STACKER_ENTRY_JAM - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
STACKER: Entry jam
STACKER_HOPPER_ABSENT - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
STACKER: Hopper absent
STACKER_HOPPER_FULL - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
STACKER: Hopper full
STACKER_INITIALIZATION_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
STACKER: Initialization error
STACKER_INVALID_FIRMWARE - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
STACKER: Invalid firmware
STACKER_LIFT_JAM - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
STACKER: Lift jam
STACKER_MISSING - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
STACKER: Module missing
STACKER_UNAUTHORIZED - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
STACKER: Unauthorized module
STANDBY_TIMEOUT - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Standby timeout.
start - Variable in class com.zebra.sdk.common.card.containers.MagSentinel
Start sentinel character.
startSentinel - Variable in class com.zebra.sdk.common.card.containers.MagneticEncoderOffsetInfo
Map containing the individual track start sentinel offset values.
status - Variable in class com.zebra.sdk.common.card.containers.PrinterStatusInfo
Current printer status.
stripeLocation - Variable in class com.zebra.sdk.common.card.containers.MagneticEncoderInfo
Location of the magnetic encoder (front or back).
subnetMask - Variable in class com.zebra.sdk.common.card.containers.NetworkInfo
Subnet mask.
subnetMask - Variable in class com.zebra.sdk.common.card.containers.WirelessNetworkInfo
Subnet mask (read-only).
subnetSearch(DiscoveryHandler, String) - Static method in class com.zebra.sdk.common.card.printer.discovery.NetworkCardDiscoverer
Sends a discovery packet to the IPs specified in the subnetRange.
SymbolShape - Enum in com.zebra.sdk.common.card.graphics.barcode.enumerations
Enumeration for the data matrix symbol shape hint.
SYSTEM_BOOT_INTEGRITY_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
System: Boot region integrity error
SYSTEM_CRITICAL_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
System: Critical error
SYSTEM_DUPLEX_UPGRADE_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
System: Duplex upgrade error
SYSTEM_EP_DIAG_MODE_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
System: EP diagnostic mode error
SYSTEM_FIRMWARE_UPGRADE_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
System: Firmware upgrade failed
SYSTEM_INCOMPATIBLE_FIRMWARE_UPGRADE - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
System: Incompatible firmware upgrade attempted
SYSTEM_INTERTASK_MESSAGE_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
System: Intertask message error
SYSTEM_INVALID_HW_CONFIG_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
System: Invalid hardware configuration error
SYSTEM_NO_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
System: No error
SYSTEM_POWERING_UP - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
System: Printer powering up
SYSTEM_PROGRAM_INTEGRITY_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
System: Program region integrity error
SYSTEM_WATCHDOG_TIMER_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
System: Watchdog timer error

T

TcpConnection - Class in com.zebra.sdk.comm
Establishes a TCP connection to a device

TcpConnection(String, int) - Constructor for class com.zebra.sdk.comm.TcpConnection
Initializes a new instance of the TcpConnection class.
TcpConnection(String, int, int, int) - Constructor for class com.zebra.sdk.comm.TcpConnection
Initializes a new instance of the TcpConnection class.
TemplateJob - Class in com.zebra.sdk.common.card.containers
Class for holding data to be rendered during card template printing.
TemplateJob() - Constructor for class com.zebra.sdk.common.card.containers.TemplateJob
 
TextAlignment - Enum in com.zebra.sdk.common.card.graphics.enumerations
Specifies the text alignment relative to its layout rectangle.
thickness - Variable in class com.zebra.sdk.common.card.containers.CardTypeInfo
Card thickness (mil).
timeout - Variable in class com.zebra.sdk.common.card.containers.DiscoveryConfiguration
Maximum discovery timeout value in milliseconds per retry (1000-10000).
Timeout - Enum in com.zebra.sdk.common.card.enumerations
Specifies the amount of time before the printer enters standby mode.
TimeoutSec - Variable in class com.zebra.sdk.common.card.printer.discovery.DiscoveryInfo
Timeout value (seconds) to wait during each broadcast attempt.
toggle - Variable in class com.zebra.sdk.common.card.containers.OCPLine
Indicates whether the message should toggle.
For ZXP Series and ZMotif Series 7, 8, and 9 printers only.
topDouble - Variable in class com.zebra.sdk.common.card.containers.TransferTemps
Top double-sided temperature offset.
topSingle - Variable in class com.zebra.sdk.common.card.containers.TransferTemps
Top single-sided temperature offset.
topTemp - Variable in class com.zebra.sdk.common.card.containers.LaminatorAdjustments
Top laminate temperature offset.
toString() - Method in interface com.zebra.sdk.comm.Connection
See the classes which implement this method for the format of the description string.
toString() - Method in class com.zebra.sdk.comm.TcpConnection
Returns TCP:[address]:[port number].
The address and port number are the parameters which were passed into the constructor.
toString() - Method in class com.zebra.sdk.comm.UsbConnection
Returns the Connection Builder name of the USB device.
toString() - Method in class com.zebra.sdk.printer.discovery.DiscoveredPrinter
For TCP, this returns the IP Address.
For driver, this returns the local printer name.
toString() - Method in class com.zebra.sdk.printer.discovery.DiscoveredPrinterDriver
Returns the name of the printer.
toString() - Method in class com.zebra.sdk.settings.Setting
Returns the Setting data including the value, type, and range for the setting.
TOTAL_CARDS_PRINTED - Static variable in class com.zebra.sdk.common.card.settings.ZebraCardSettingNames
Total cards printed.
TOTAL_LINES_PRINTED - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Total lines printed.
TOTAL_PANELS_PRINTED - Static variable in class com.zebra.sdk.zxp.settings.ZebraCardSettingNamesZxp
Total panels printed.
TOTAL_PRINT_PASSES_COMPLETED - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Total print passes completed.
For ZC Series printers only.
totalCards - Variable in class com.zebra.sdk.common.card.containers.CardCountInfo
Total number of cards.
track1Data - Variable in class com.zebra.sdk.common.card.containers.MagTrackData
Track 1 data.
track1Format - Variable in class com.zebra.sdk.common.card.containers.MagConfigInfo
Track 1 DataFormat (ASCII or HEX).
track2Data - Variable in class com.zebra.sdk.common.card.containers.MagTrackData
Track 2 data.
track2Format - Variable in class com.zebra.sdk.common.card.containers.MagConfigInfo
Track 2 DataFormat (ASCII or HEX).
track3Data - Variable in class com.zebra.sdk.common.card.containers.MagTrackData
Track 3 data.
track3Format - Variable in class com.zebra.sdk.common.card.containers.MagConfigInfo
Track 3 DataFormat (ASCII or HEX).
TrackNumber - Enum in com.zebra.sdk.common.card.enumerations
Specifies the track of the magnetic card to be written to/read from.
TRANSFER_BOTTOM_TEMPERATURE_CALIBRATION - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Transfer bottom temperature calibration.
TRANSFER_BOTTOM_TEMPERATURE_TILT - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Transfer bottom temperature tilt.
TRANSFER_TEMPERATURE_BOTTOM_DOUBLE - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Transfer bottom temperature double sided.
TRANSFER_TEMPERATURE_BOTTOM_DOUBLE_OFFSET - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Transfer bottom temperature offset double sided.
TRANSFER_TEMPERATURE_BOTTOM_SINGLE - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Transfer bottom temperature single sided.
TRANSFER_TEMPERATURE_BOTTOM_SINGLE_OFFSET - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Transfer bottom temperature offset single sided.
TRANSFER_TEMPERATURE_TOP_DOUBLE - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Transfer top temperature double sided.
TRANSFER_TEMPERATURE_TOP_DOUBLE_OFFSET - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Transfer top temperature offset double sided.
TRANSFER_TEMPERATURE_TOP_SINGLE - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Transfer top temperature single sided.
TRANSFER_TEMPERATURE_TOP_SINGLE_OFFSET - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Transfer top temperature offset single sided.
TRANSFER_TOP_TEMPERATURE_CALIBRATION - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Transfer top temperature calibration.
TRANSFER_TOP_TEMPERATURE_TILT - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Transfer top temperature tilt.
TRANSFER_TYPE - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Transfer type.
transferSpeeds - Variable in class com.zebra.sdk.common.card.containers.CardTypeInfo
Film transfer speed.
For ZMotif Series 8 and 9 only.
TransferSpeeds - Class in com.zebra.sdk.common.card.containers
Class for holding information for card type-specific transfer speed offsets for the ZMotif Series 8 and 9 printers.
Part of container CardTypeInfo.
TransferSpeeds() - Constructor for class com.zebra.sdk.common.card.containers.TransferSpeeds
Instantiates the TransferSpeeds class.
TransferTemperatureType - Enum in com.zebra.sdk.common.card.enumerations
Specifies a particular re-transfer temperature sensor.
For ZMotif Series re-transfer printers only.
transferTemps - Variable in class com.zebra.sdk.common.card.containers.CardTypeInfo
Film transfer temperatures.
For ZMotif Series 8 and 9 only.
TransferTemps - Class in com.zebra.sdk.common.card.containers
Class for holding information for card type-specific transfer temperature offsets for the ZMotif Series 8 and 9 printers.
Part of container CardTypeInfo.
TransferTemps() - Constructor for class com.zebra.sdk.common.card.containers.TransferTemps
Instantiates the TransferTemps class.
TransferType - Enum in com.zebra.sdk.common.card.enumerations
Specifies the transfer type of the printer.
TRICOLOR_BLUE - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Tricolor blue sensor.
TRICOLOR_CLEAR_TO_COLOR - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Tricolor clear to color sensor.
TRICOLOR_GREEN - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Tricolor green sensor.
TRICOLOR_RED - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Tricolor red sensor.
type - Variable in class com.zebra.sdk.common.card.containers.CardTypeInfo
If custom card, specifies 0 - CUSTOM_CARD_1 or 1 - CUSTOM_CARD_2.
type - Variable in class com.zebra.sdk.common.card.containers.MediaInfo
The media type.

U

underline - Variable in class com.zebra.sdk.common.card.containers.OCPLine
Indicates whether the message should be underlined.
For ZMotif Series 7, 8, and 9 printers only.
updateFirmware(String) - Method in interface com.zebra.sdk.common.card.device.DeviceUtil
Updates the printer's firmware.
updateFirmware(String, CardFirmwareUpdateHandler) - Method in interface com.zebra.sdk.common.card.device.DeviceUtil
Updates the printer's firmware.
USB_HANDLE_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
USB: Handle error
USB_LOCKED - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
USB: Locked
USB_MESSAGE_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
USB: Message error
USB_OPEN_FAILED - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
USB: Open failed
USB_PAYLOAD_PENDING - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
USB: Payload pending
USB_PAYLOAD_TOO_BIG - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
USB: Payload too big
USB_READ_TIMEOUT - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
USB read operation timeout.
USB_RESTART_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
USB: Restart
USB_SHORT_MESSAGE - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
USB: Message short
USB_SPEED - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
USB speed.
USB_SYNCH_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
USB: Synchronization error
USB_WRITE_TIMEOUT - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
USB write operation timeout.
UsbConnection - Class in com.zebra.sdk.comm
Establishes a direct connection to an attached Zebra USB printer without requiring the presence of a USB driver
UsbConnection(String) - Constructor for class com.zebra.sdk.comm.UsbConnection
Initializes a new instance of the UsbConnection class.
UsbConnection(String, int, int) - Constructor for class com.zebra.sdk.comm.UsbConnection
Initializes a new instance of the UsbConnection class.
UsbDiscoverer - Class in com.zebra.sdk.printer.discovery
A class used to discover USB connected Zebra printers.
UsbDiscoverer() - Constructor for class com.zebra.sdk.printer.discovery.UsbDiscoverer
A class used to discover USB connected Zebra printers.
USER_PANEL_POWER_ADJ_CYAN - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
User cyan panel power adjustment.
USER_PANEL_POWER_ADJ_HELPER - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
User helper panel power adjustment.
USER_PANEL_POWER_ADJ_INHIBIT - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
User inhibit panel power adjustment.
USER_PANEL_POWER_ADJ_KDYE - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
User k-dye panel power adjustment.
USER_PANEL_POWER_ADJ_KRESIN_BACK - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
User k-resin panel power adjustment back.
USER_PANEL_POWER_ADJ_KRESIN_FRONT - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
User k-resin panel power adjustment front.
USER_PANEL_POWER_ADJ_MAGENTA - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
User magenta panel power adjustment.
USER_PANEL_POWER_ADJ_OVERLAY - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
User overlay panel power adjustment.
USER_PANEL_POWER_ADJ_UV_BACK - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
User uv panel power adjustment back.
USER_PANEL_POWER_ADJ_UV_FRONT - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
User uv panel power adjustment front.
USER_PANEL_POWER_ADJ_X_RESIN - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
User x-resin panel power adjustment.
USER_PANEL_POWER_ADJ_YELLOW - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
User yellow panel power adjustment.
USER_PRINT_SPEED_ADJUST - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
User print speed adjustment.
UV_SPEED_ADJUST - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
UV print speed adjustment.
UV_X_OFFSET - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
UV print x-offset.

V

value - Variable in class com.zebra.sdk.common.card.containers.AlarmInfo
Alarm or error code.
value - Variable in class com.zebra.sdk.common.card.containers.ParameterInfo
Parameter's value.
valueOf(String) - Static method in enum com.zebra.sdk.common.card.enumerations.ATMMode
Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum com.zebra.sdk.common.card.enumerations.CalibrationTable
Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum com.zebra.sdk.common.card.enumerations.CapabilitiesType
Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum com.zebra.sdk.common.card.enumerations.CardDestination
Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum com.zebra.sdk.common.card.enumerations.CardSide
Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum com.zebra.sdk.common.card.enumerations.CardSource
Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum com.zebra.sdk.common.card.enumerations.CleaningPath
Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum com.zebra.sdk.common.card.enumerations.CoercivityType
Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum com.zebra.sdk.common.card.enumerations.CustomCard
Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum com.zebra.sdk.common.card.enumerations.DataCharParity
Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum com.zebra.sdk.common.card.enumerations.DataFormat
Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum com.zebra.sdk.common.card.enumerations.DataSource
Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum com.zebra.sdk.common.card.enumerations.ErrorControlLevel
Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum com.zebra.sdk.common.card.enumerations.FillType
Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum com.zebra.sdk.common.card.enumerations.GraphicType
Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum com.zebra.sdk.common.card.enumerations.ImageRotation
Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum com.zebra.sdk.common.card.enumerations.IPVersion
Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum com.zebra.sdk.common.card.enumerations.KOptimizationType
Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum com.zebra.sdk.common.card.enumerations.LaminatorOffsetType
Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum com.zebra.sdk.common.card.enumerations.LogType
Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum com.zebra.sdk.common.card.enumerations.MagEncoderType
Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum com.zebra.sdk.common.card.enumerations.MagEncodingType
Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum com.zebra.sdk.common.card.enumerations.MediaType
Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum com.zebra.sdk.common.card.enumerations.MonoConversionType
Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum com.zebra.sdk.common.card.enumerations.OCPLanguage
Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum com.zebra.sdk.common.card.enumerations.OrientationType
Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum com.zebra.sdk.common.card.enumerations.PanelType
Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum com.zebra.sdk.common.card.enumerations.PrinterType
Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum com.zebra.sdk.common.card.enumerations.PrintOptimizationMode
Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum com.zebra.sdk.common.card.enumerations.PrintType
Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum com.zebra.sdk.common.card.enumerations.ReservationType
Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum com.zebra.sdk.common.card.enumerations.RibbonPanelType
Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum com.zebra.sdk.common.card.enumerations.SharpeningLevel
Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum com.zebra.sdk.common.card.enumerations.SmartCardEncoderType
Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum com.zebra.sdk.common.card.enumerations.SmartCardType
Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum com.zebra.sdk.common.card.enumerations.Timeout
Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum com.zebra.sdk.common.card.enumerations.TrackNumber
Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum com.zebra.sdk.common.card.enumerations.TransferTemperatureType
Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum com.zebra.sdk.common.card.enumerations.TransferType
Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum com.zebra.sdk.common.card.enumerations.WirelessCryptoType
Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum com.zebra.sdk.common.card.enumerations.WirelessSecurityType
Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum com.zebra.sdk.common.card.graphics.barcode.enumerations.BaselinePosition
Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum com.zebra.sdk.common.card.graphics.barcode.enumerations.ChecksumMode
Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum com.zebra.sdk.common.card.graphics.barcode.enumerations.Code128CharacterSet
Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum com.zebra.sdk.common.card.graphics.barcode.enumerations.ErrorCorrectionLevel
Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum com.zebra.sdk.common.card.graphics.barcode.enumerations.HumanReadablePlacement
Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum com.zebra.sdk.common.card.graphics.barcode.enumerations.LogicalHeight
Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum com.zebra.sdk.common.card.graphics.barcode.enumerations.Rotation
Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum com.zebra.sdk.common.card.graphics.barcode.enumerations.SymbolShape
Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum com.zebra.sdk.common.card.graphics.enumerations.ImagePosition
Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum com.zebra.sdk.common.card.graphics.enumerations.MonochromeConversion
Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum com.zebra.sdk.common.card.graphics.enumerations.PrinterModel
Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum com.zebra.sdk.common.card.graphics.enumerations.RotationType
Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum com.zebra.sdk.common.card.graphics.enumerations.TextAlignment
Returns the enum constant of this type with the specified name.
values() - Static method in enum com.zebra.sdk.common.card.enumerations.ATMMode
Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum com.zebra.sdk.common.card.enumerations.CalibrationTable
Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum com.zebra.sdk.common.card.enumerations.CapabilitiesType
Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum com.zebra.sdk.common.card.enumerations.CardDestination
Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum com.zebra.sdk.common.card.enumerations.CardSide
Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum com.zebra.sdk.common.card.enumerations.CardSource
Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum com.zebra.sdk.common.card.enumerations.CleaningPath
Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum com.zebra.sdk.common.card.enumerations.CoercivityType
Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum com.zebra.sdk.common.card.enumerations.CustomCard
Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum com.zebra.sdk.common.card.enumerations.DataCharParity
Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum com.zebra.sdk.common.card.enumerations.DataFormat
Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum com.zebra.sdk.common.card.enumerations.DataSource
Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum com.zebra.sdk.common.card.enumerations.ErrorControlLevel
Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum com.zebra.sdk.common.card.enumerations.FillType
Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum com.zebra.sdk.common.card.enumerations.GraphicType
Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum com.zebra.sdk.common.card.enumerations.ImageRotation
Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum com.zebra.sdk.common.card.enumerations.IPVersion
Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum com.zebra.sdk.common.card.enumerations.KOptimizationType
Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum com.zebra.sdk.common.card.enumerations.LaminatorOffsetType
Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum com.zebra.sdk.common.card.enumerations.LogType
Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum com.zebra.sdk.common.card.enumerations.MagEncoderType
Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum com.zebra.sdk.common.card.enumerations.MagEncodingType
Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum com.zebra.sdk.common.card.enumerations.MediaType
Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum com.zebra.sdk.common.card.enumerations.MonoConversionType
Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum com.zebra.sdk.common.card.enumerations.OCPLanguage
Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum com.zebra.sdk.common.card.enumerations.OrientationType
Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum com.zebra.sdk.common.card.enumerations.PanelType
Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum com.zebra.sdk.common.card.enumerations.PrinterType
Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum com.zebra.sdk.common.card.enumerations.PrintOptimizationMode
Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum com.zebra.sdk.common.card.enumerations.PrintType
Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum com.zebra.sdk.common.card.enumerations.ReservationType
Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum com.zebra.sdk.common.card.enumerations.RibbonPanelType
Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum com.zebra.sdk.common.card.enumerations.SharpeningLevel
Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum com.zebra.sdk.common.card.enumerations.SmartCardEncoderType
Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum com.zebra.sdk.common.card.enumerations.SmartCardType
Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum com.zebra.sdk.common.card.enumerations.Timeout
Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum com.zebra.sdk.common.card.enumerations.TrackNumber
Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum com.zebra.sdk.common.card.enumerations.TransferTemperatureType
Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum com.zebra.sdk.common.card.enumerations.TransferType
Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum com.zebra.sdk.common.card.enumerations.WirelessCryptoType
Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum com.zebra.sdk.common.card.enumerations.WirelessSecurityType
Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum com.zebra.sdk.common.card.graphics.barcode.enumerations.BaselinePosition
Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum com.zebra.sdk.common.card.graphics.barcode.enumerations.ChecksumMode
Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum com.zebra.sdk.common.card.graphics.barcode.enumerations.Code128CharacterSet
Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum com.zebra.sdk.common.card.graphics.barcode.enumerations.ErrorCorrectionLevel
Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum com.zebra.sdk.common.card.graphics.barcode.enumerations.HumanReadablePlacement
Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum com.zebra.sdk.common.card.graphics.barcode.enumerations.LogicalHeight
Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum com.zebra.sdk.common.card.graphics.barcode.enumerations.Rotation
Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum com.zebra.sdk.common.card.graphics.barcode.enumerations.SymbolShape
Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum com.zebra.sdk.common.card.graphics.enumerations.ImagePosition
Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum com.zebra.sdk.common.card.graphics.enumerations.MonochromeConversion
Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum com.zebra.sdk.common.card.graphics.enumerations.PrinterModel
Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum com.zebra.sdk.common.card.graphics.enumerations.RotationType
Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum com.zebra.sdk.common.card.graphics.enumerations.TextAlignment
Returns an array containing the constants of this enum type, in the order they are declared.
vendor - Variable in class com.zebra.sdk.common.card.containers.PrinterInfo
Printer's vendor.
verify - Variable in class com.zebra.sdk.common.card.containers.MagConfigInfo
Indicates whether or not to verify that the data was encoded successfully.

W

waitForData(int) - Method in interface com.zebra.sdk.comm.Connection
Causes the currently executing thread to sleep until Connection.bytesAvailable() > 0, or for a maximum of maxTimeout milliseconds.
waitForData(int) - Method in class com.zebra.sdk.comm.ConnectionA
 
WIFI_ACCESS_POINT_MISSING - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
WIFI: Access point missing
WIFI_ASSOCIATION_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
WIFI: Association failed
WIFI_INCOMPATIBLE_CONFIG - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
WIFI: Incompatible configuration
WIFI_LINK_LOST - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
WIFI: Link lost
WIFI_OPEN_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
WIFI: Open failed
WIFIF_CONNECTION_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
WIFI: Connection failed
WIRED_ADDRESS - Static variable in class com.zebra.sdk.common.card.settings.ZebraCardSettingNames
Wired IP address.
WIRED_DHCP - Static variable in class com.zebra.sdk.common.card.settings.ZebraCardSettingNames
Wired DHCP enabled.
WIRED_DNS_NAME - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Wired DNS name.
WIRED_GATEWAY - Static variable in class com.zebra.sdk.common.card.settings.ZebraCardSettingNames
Wired gateway address.
WIRED_IPV6_ADDRESS - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Wired IPV6 IP address.
WIRED_MAC - Static variable in class com.zebra.sdk.common.card.settings.ZebraCardSettingNames
Wired MAC address.
WIRED_SNMP - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Wired SNMP enabled.
WIRED_SUBNET - Static variable in class com.zebra.sdk.common.card.settings.ZebraCardSettingNames
Wired subnet mask.
WIRELESS_ADDRESS - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Wireless IP address.
WIRELESS_BSSID - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Wireless BSSID.
WIRELESS_CHANNEL - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Wireless channel.
WIRELESS_COUNTRY - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Wireless country.
WIRELESS_CRYPTO - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Wireless cryptographic security type.
WIRELESS_DHCP - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Wireless DHCP enabled.
WIRELESS_GATEWAY - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Wireless Gateway address.
WIRELESS_KEY - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Wireless security key.
WIRELESS_MAC - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Wireless MAC address.
WIRELESS_RADIO - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Wireless radio enabled.
WIRELESS_SECURITY - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Wireless security type.
WIRELESS_SNMP - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Wireless SNMP enabled.
WIRELESS_SSID - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Wireless SSID name.
WIRELESS_SUBNET - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Wireless Subnet mask.
WirelessAccessPointInfo - Class in com.zebra.sdk.common.card.containers
Class for holding information about the discovered wireless access points.
WirelessAccessPointInfo() - Constructor for class com.zebra.sdk.common.card.containers.WirelessAccessPointInfo
Instantiates the WirelessAccessPointInfo.
WirelessCryptoType - Enum in com.zebra.sdk.common.card.enumerations
Specifies the wireless cryptographic security type.
wirelessKey - Variable in class com.zebra.sdk.common.card.containers.WirelessNetworkInfo
Wireless key (write-only).
WirelessNetworkInfo - Class in com.zebra.sdk.common.card.containers
Class for holding information about the printer's wireless network configuration.
For ZMotif Series printers only.
WirelessNetworkInfo() - Constructor for class com.zebra.sdk.common.card.containers.WirelessNetworkInfo
Instantiates the WirelessNetworkInfo class.
WirelessSecurityType - Enum in com.zebra.sdk.common.card.enumerations
Specifies the wireless security type.
write(byte[]) - Method in interface com.zebra.sdk.comm.Connection
Writes data.length bytes from the specified byte array to this output stream.
write(byte[], int, int) - Method in interface com.zebra.sdk.comm.Connection
Writes length bytes from data starting at offset.
write(InputStream) - Method in interface com.zebra.sdk.comm.Connection
Writes all available bytes from the data source to this output stream.
write(byte[]) - Method in class com.zebra.sdk.comm.ConnectionA
 
write(InputStream) - Method in class com.zebra.sdk.comm.ConnectionA
 
write(byte[], int, int) - Method in class com.zebra.sdk.comm.ConnectionA
 
write(byte[]) - Method in class com.zebra.sdk.comm.UsbConnection
 
write(byte[], int, int) - Method in class com.zebra.sdk.comm.UsbConnection
 

X

X_OFFSET_BACK - Static variable in class com.zebra.sdk.zxp.settings.ZebraCardSettingNamesZxp
X-Offset back side.
X_OFFSET_FRONT - Static variable in class com.zebra.sdk.zxp.settings.ZebraCardSettingNamesZxp
X-Offset front.
xOffset - Variable in class com.zebra.sdk.common.card.containers.GraphicsInfo
X-offset (pixels) from origin 0, 0.
xOffset - Variable in class com.zebra.sdk.common.card.containers.MagneticEncoderOffsetInfo
Card x-offset.

Y

Y_OFFSET_BACK - Static variable in class com.zebra.sdk.zxp.settings.ZebraCardSettingNamesZxp
Y-Offset back side.
Y_OFFSET_FRONT - Static variable in class com.zebra.sdk.zxp.settings.ZebraCardSettingNamesZxp
Y-Offset front side.
YELLOW_PANEL_INTENSITY_BACK - Static variable in class com.zebra.sdk.zxp.job.ZebraCardJobSettingNamesZxp
Back Yellow Panel Intensity.
YELLOW_PANEL_INTENSITY_FRONT - Static variable in class com.zebra.sdk.zxp.job.ZebraCardJobSettingNamesZxp
Front Yellow Panel Intensity.
YELLOW_SPEED_ADJUST - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Yellow print speed adjustment.
YELLOW_X_OFFSET - Static variable in class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Yellow print x-offset.
yOffset - Variable in class com.zebra.sdk.common.card.containers.GraphicsInfo
Y-offset (pixels) from origin 0, 0.

Z

ZebraBarcodeFactory - Class in com.zebra.sdk.common.card.graphics.barcode
Used to get the correct barcode utilities class.

ZebraCardErrors - Class in com.zebra.sdk.common.card.errors
Card printer error code values.
ZebraCardErrors() - Constructor for class com.zebra.sdk.common.card.errors.ZebraCardErrors
 
ZebraCardException - Exception in com.zebra.sdk.common.card.exceptions
Generic Zebra card printer Exception class.
ZebraCardException() - Constructor for exception com.zebra.sdk.common.card.exceptions.ZebraCardException
Constructs a ZebraCardException.
ZebraCardException(String) - Constructor for exception com.zebra.sdk.common.card.exceptions.ZebraCardException
Constructs a ZebraCardException with message.
ZebraCardException(Throwable) - Constructor for exception com.zebra.sdk.common.card.exceptions.ZebraCardException
Constructs a ZebraCardException with chained exception cause.
ZebraCardException(String, Throwable) - Constructor for exception com.zebra.sdk.common.card.exceptions.ZebraCardException
Constructs a ZebraCardException with message and chained exception cause.
ZebraCardException(int, String) - Constructor for exception com.zebra.sdk.common.card.exceptions.ZebraCardException
Constructs a ZebraCardException with the errorCode and message.
ZebraCardException(int, String, Throwable) - Constructor for exception com.zebra.sdk.common.card.exceptions.ZebraCardException
Constructs a ZebraCardException with the errorCode, message and chained exception cause.
zebraCardGraphics - Variable in class com.zebra.sdk.common.card.containers.TemplateJob
Contains a ZebraGraphicsI instance for all Zebra card printer graphics-related tasks.
ZebraCardGraphics - Class in com.zebra.sdk.common.card.graphics
Used to construct the graphics for Card printers.
ZebraCardGraphics(ZebraCardPrinter) - Constructor for class com.zebra.sdk.common.card.graphics.ZebraCardGraphics
Public Constructor to construct the ZebraCardGraphics object.
ZebraCardImage - Class in com.zebra.sdk.common.card.graphics
Class for platform-dependent graphic bitmap image data.
ZebraCardImage(byte[]) - Constructor for class com.zebra.sdk.common.card.graphics.ZebraCardImage
Initializes a new instance of the ZebraCardImage class.
ZebraCardImageI - Interface in com.zebra.sdk.common.card.graphics
Container to hold platform-dependent graphic images.
ZebraCardJobSettingNames - Class in com.zebra.sdk.common.card.jobSettings
Container class for common card printer job parameter key names.
ZebraCardJobSettingNames() - Constructor for class com.zebra.sdk.common.card.jobSettings.ZebraCardJobSettingNames
Instantiates the ZebraCardJobSettingNames class
ZebraCardJobSettingNamesZmotif - Class in com.zebra.sdk.zmotif.job
Container class for ZMotif Series 7, 8, and 9 card printer job parameter key names.
ZebraCardJobSettingNamesZmotif() - Constructor for class com.zebra.sdk.zmotif.job.ZebraCardJobSettingNamesZmotif
Instantiates the ZebraCardJobSettingNamesZmotif.
ZebraCardJobSettingNamesZxp - Class in com.zebra.sdk.zxp.job
Container class for ZXP Series 1 and 3 card printer job parameter key names.
ZebraCardJobSettingNamesZxp() - Constructor for class com.zebra.sdk.zxp.job.ZebraCardJobSettingNamesZxp
Instantiates the ZebraCardJobSettingNamesZxp class
ZebraCardPrinter - Interface in com.zebra.sdk.common.card.printer
Base interface used to obtain various properties of a Zebra card printer.
ZebraCardPrinterFactory - Class in com.zebra.sdk.common.card.printer
Creates a card printer object (ZMotif or ZXP).
ZebraCardPrinterFilter - Class in com.zebra.sdk.common.card.printer.discovery
DiscoveredPrinterFilter implementation that filters out all unsupported devices.
ZebraCardPrinterFilter() - Constructor for class com.zebra.sdk.common.card.printer.discovery.ZebraCardPrinterFilter
 
ZebraCardSettingNames - Class in com.zebra.sdk.common.card.settings
Container class for common card printer device parameter key names.
ZebraCardSettingNames() - Constructor for class com.zebra.sdk.common.card.settings.ZebraCardSettingNames
Instantiates the ZebraCardSettingNames class.
ZebraCardSettingNamesZmotif - Class in com.zebra.sdk.zmotif.settings
Container class for ZMotif Series 7, 8, and 9 card printer device parameter key names.
ZebraCardSettingNamesZmotif() - Constructor for class com.zebra.sdk.zmotif.settings.ZebraCardSettingNamesZmotif
Instantiates the ZebraCardSettingNamesZmotif class.
ZebraCardSettingNamesZxp - Class in com.zebra.sdk.zxp.settings
Container class for ZXP Series 1 and 3 card printer device parameter key names.
ZebraCardSettingNamesZxp() - Constructor for class com.zebra.sdk.zxp.settings.ZebraCardSettingNamesZxp
Instantiates the ZebraCardSettingNamesZxp class
ZebraCardTemplate - Class in com.zebra.sdk.common.card.template
Class for managing template related operations

ZebraCardTemplate(ZebraCardPrinter) - Constructor for class com.zebra.sdk.common.card.template.ZebraCardTemplate
Constructs a ZebraCardTemplate object.
ZebraGraphics - Interface in com.zebra.sdk.common.card.graphics
Interface for Zebra card printer graphics.

ZebraGraphicsI - Interface in com.zebra.sdk.common.card.graphics
Interface for all Zebra card printer graphics-related tasks.
ZebraIllegalArgumentException - Exception in com.zebra.sdk.device
Signals that an illegal argument was used.
ZebraIllegalArgumentException(String) - Constructor for exception com.zebra.sdk.device.ZebraIllegalArgumentException
Constructs a ZebraIllegalArgumentException with message as the detailed error message
ZebraPrinterFilter - Class in com.zebra.sdk.printer.discovery
DiscoveredPrinterFilter implementation that filters out all unsupported Zebra Printers.
ZebraPrinterFilter() - Constructor for class com.zebra.sdk.printer.discovery.ZebraPrinterFilter
 
ZebraPrinterZmotif - Interface in com.zebra.sdk.common.card.printer
Interface to ZMotif Series printers.
ZebraPrinterZxp - Interface in com.zebra.sdk.common.card.printer
Interface to ZXP Series 1 and 3 printers.
ZebraTemplate - Interface in com.zebra.sdk.common.card.job.template
An interface used to define functions used in template-related operations.
ZMC_CANCEL_ACTION_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
ZMC: Cancel Action error
ZMC_CMD_PROCESSING_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
ZMC: Command processing error
ZMC_COMM_SYNCH_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
ZMC: Communication synch error
ZMC_DATA_LESS_THAN_SPECIFIED - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
ZMC: Data less than specified in header
ZMC_DATA_MORE_THAN_SPECIFIED - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
ZMC: Data more than specified in header
ZMC_DEVICE_RESERVATION_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
ZMC: Device reservation failed
ZMC_DUP_START_ACTION - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
ZMC: Start Action already called
ZMC_END_ACTION_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
ZMC: End Action error
ZMC_HMAC_MISSING - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
ZMC: HMAC missing
ZMC_INVALID_CMD - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
ZMC: Invalid command
ZMC_INVALID_PARAMETER_1 - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
ZMC: Invalid parameter (1)
ZMC_INVALID_PARAMETER_2 - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
ZMC: Invalid parameter (2)
ZMC_INVALID_PARAMETER_3 - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
ZMC: Invalid parameter (3)
ZMC_INVALID_PAYLOAD_CONTENT - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
ZMC: Invalid payload content
ZMC_INVALID_PAYLOAD_LENGTH - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
ZMC: Invalid payload length
ZMC_INVALID_SUB_CMD - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
ZMC: Invalid sub-command
ZMC_JOB_DATA_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
ZMC: Job data error
ZMC_MEM_POOL_ALLOC_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
ZMC: Memory-pool allocation error
ZMC_NO_START_ACTION - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
ZMC: No Start Action
ZMC_PARAMETER_NOT_FOUND - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
ZMC: Parameter not found
ZMC_PARAMETER_OUTSIDE_RANGE - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
ZMC: Parameter value outside of valid range
ZMC_PARAMETER_SETTING_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
ZMC: Parameter setting error
ZMC_PARAMETER_WRONG_TYPE - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
ZMC: Incorrect parameter type
ZMC_PRINTER_BUSY - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
ZMC: Printer busy
ZMC_PRINTER_OFFLINE - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
ZMC: Printer offline
ZMC_READ_EXPECTED - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
ZMC: Host write occurred when host read expected
ZMC_RESPONSE_TOO_LARGE - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
ZMC: Response too large for host
ZMC_WRITE_EXPECTED - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
ZMC: Host read occurred when host write expected
ZMC_XML_PARSE_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
ZMC: XML parse error
ZMJ_BARCODE_READER_NOT_AVAILABLE - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
ZMJ: No barcode reader installed
ZMJ_CMD_PROC_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
ZMJ: Command processing error
ZMJ_COPIES_OUT_OF_RANGE - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
ZMJ: Number of requested copies out-of-range
ZMJ_DECRYPTION_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
ZMJ: Data decryption error
ZMJ_INVALID_CMD - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
ZMJ: Invalid command
ZMJ_INVALID_JOB_ID - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
ZMJ: Invalid job ID
ZMJ_INVALID_ZMOTIF_VERSION - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
ZMJ: Invalid ZMOTIF version
ZMJ_JOB_ALREADY_OPEN - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
ZMJ: Job already open
ZMJ_JOB_CNTRL_PARSE_ERROR - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
ZMJ: Job Control XML parse error
ZMJ_MAG_ENCODER_NOT_AVAILABLE - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
ZMJ: No magnetic encoder installed
ZMJ_MISSING_CMD_ID - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
ZMJ: Command identifier 'ZBR1' not found
ZMJ_NO_DATA_RCVD - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
ZMJ: No XML data received
ZMJ_NO_JOB_TYPE - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
ZMJ: No job type received
ZMJ_NO_MATCHING_ENCODER - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
ZMJ: No matching encoder type
ZMJ_UNKNOWN_JOB_TYPE - Static variable in class com.zebra.sdk.common.card.errors.ZebraCardErrors
ZMJ: Unknown job type received
zmotifVersion - Variable in class com.zebra.sdk.common.card.containers.PrinterInfo
ZMotif version.
A B C D E F G H I J K L M N O P R S T U V W X Y Z 

© 2016 ZIH Corp. All Rights Reserved.