See: Description
| Enum | Description |
|---|---|
| ATMMode |
Gets or sets the card feeder source.
ZXP Series 1 and 3 only. |
| CalibrationTable |
Specifies a specific Calibration Table contained in the Printer.
|
| CapabilitiesType |
Specifies the type of printer capabilities to request.
ZMotif Series printers only. |
| CardDestination |
Specifies the destination of the card following job completion.
|
| CardSide |
Specifies the side of the card to be used for the desired operation.
|
| CardSource |
Specifies the card source location.
|
| CleaningPath |
Specifies a cleaning path for the cleaning operation
|
| CoercivityType |
Specifies the coercivity type for magnetic encoding.
|
| CustomCard |
Specifies the custom card type to use.
|
| DataCharParity |
Specifies the data character parity for magnetic encoding.
|
| DataFormat |
Specifies the data format for magnetic encoding.
|
| DataSource |
Specifies the data source for the specified magnetic read operation.
|
| ErrorControlLevel |
Specifies the printer's error control level.
|
| FillType |
Specifies the full coverage print type for Overlay 'O' and Laminate 'L' ribbon panels.
ZC Series printers only. Used with PrintType.Overlay and GraphicsInfo.fillColor.
|
| GraphicType |
Specifies the type of image data.
|
| ImageRotation |
Specifies the rotation of the image data.
|
| IPVersion |
Specifies the Internet Protocol to use during device discovery.
|
| KOptimizationType |
Specifies the monochrome optimization mode.
|
| LaminatorOffsetType |
Specifies the laminator offset type to get or set.
|
| LogType |
Specifies the type of log to get.
ZMotif Series printers only. |
| MagEncoderType | |
| MagEncodingType |
Specifies the type of magnetic encoding to perform.
|
| MediaType | |
| MonoConversionType |
Specifies the monochrome conversion type
For ZXP Series 1 and 3 printers. |
| OCPLanguage |
Specifies the OCP language.
|
| OrientationType |
Specifies the orientation of the image.
|
| PanelType |
Specifies a specific panel on the card ribbon.
|
| PrinterType |
Specifies the card printer model type.
|
| PrintOptimizationMode |
Specifies the print optimization mode.
For ZXP3xC and ZMotif Series 9 model printers. |
| PrintType |
Specifies the type of print to be performed for the given image data.
|
| ReservationType |
Specifies the type of reservation to request.
|
| RibbonPanelType |
Specifies the specific ribbon panel to be used.
|
| SharpeningLevel |
Specifies the level of sharpening to apply to the image data.
|
| SmartCardEncoderType |
Identifies the type of smart card encoder.
|
| SmartCardType |
Specifies the type of smart card.
|
| Timeout |
Specifies the amount of time before the printer enters standby mode.
|
| TrackNumber |
Specifies the track of the magnetic card to be written to/read from.
|
| TransferTemperatureType |
Specifies a particular Re-transfer Temperature sensor
For ZMotif Series re-transfer printers only. |
| TransferType |
Specifies the transfer type of the printer.
|
| WirelessCryptoType |
Specifies the wireless cryptographic security type.
|
| WirelessSecurityType |
Specifies the wireless security type.
|
© 2016 ZIH Corp. All Rights Reserved.