Class to communicate with the MC18 cradle.
Type - Java.Lang.Object
Methods
Disable
public virtual void Disable ();
This disables communication to interact with the cradle.
Returns - System.Void
Enable
public virtual void Enable ();
This method enables the communication to interact with the cradle.
Returns - System.Void
FlashLed
public virtual Symbol.XamarinEMDK.PersonalShopper.CradleResults FlashLed (int p0, Symbol.XamarinEMDK.PersonalShopper.CradleLedFlashInfo p1);
The LED can be flashed to identify device location without unlocking the cradle.
Parameters:
- System.Int32 p0 - Defines the number of times the led should blink (on/off).
- Symbol.XamarinEMDK.PersonalShopper.CradleLedFlashInfo p1 - Defines the LED blink pattern (onDuration, offDuration, smoothness)
Returns - Symbol.XamarinEMDK.PersonalShopper.CradleResults
Unlock
public virtual Symbol.XamarinEMDK.PersonalShopper.CradleResults Unlock (int p0, Symbol.XamarinEMDK.PersonalShopper.CradleLedFlashInfo p1);
This unlocks terminal from cradle and flashes the LED. The timeout represents the duration in which the terminal remains unlocked in the cradle before becoming locked again. This is in seconds and the range is from 10 (minimum) to 30 (maximum) seconds. Continuous unlock may lead to heating up of hardware which may lead to unlock failure . This failure will be indicated through blinking of cradle Red Led's .Unlock will fail until hardware gets cool down .
Parameters:
- System.Int32 p0 - The value that specifies how long the lock remains open in seconds.
- Symbol.XamarinEMDK.PersonalShopper.CradleLedFlashInfo p1 - The LED blink pattern definition
Returns - Symbol.XamarinEMDK.PersonalShopper.CradleResults
Properties
Config
The field to access Cradle configuration.
Type - Symbol.XamarinEMDK.PersonalShopper.CradleConfig
CradleInfo
This method gets the information of cradle.
Type - Symbol.XamarinEMDK.PersonalShopper.CradleInfo
IsEnabled
Check if cradle has already been enabled
Type - System.Boolean